I have a number format that I need assistance with:
The number format I need is 1234-000 or 1234-001
The normal number format is 1234-000, very rarely does the 1234-001 be used. So I would like the number format to left fill the left section 1234 and right fill the right section 001.
How do I format numbers so it will show the actual first digit, and the rest as x?
so that $1,234.56
will appear as $1,xxx.xx
or alternatively,
$1,234,567.89
will appear as $1,xxx,xxx.xx
I would prefer to do this with custom formatting rather than VBA,
(this is so I can generate sample reports for prospective clients, without showing the real numbers in the tables)
I have tried to write code to format numbers to zero decimal places as well as to justify the format as the zeroes appears as 00000000 when imported.
I need the macro to do this on the first 7 sheets.
I also need ------- lines and ) to be cleared on the first 7 sheets.
I have attached sample data and my code below
Code:
Sub Format_Data()
Dim Cnt As Long, i As Long
Cnt = Sheets.Count
Application.DisplayAlerts = False
For i = Cnt To 7
Range("F:H").Select
With Sheets(i)
[code]....
how i convert text format into numbers format in vb.
Currently
i have a formula in vB:
Private Sub Textbox3_Change()
Textbox3 = Val(Textbox1.Value) + Val(Textbox2.Value)
End Sub
however..when i sum it up (in excel) using"=sum" formula...it ooes not sum up
I faced an error "number stored as text"..how to i convert it to numbers format in vb.
I am trying to format colums containing numbers & units of measure to numbers only.
I am using Office 2003.
How to format different numbers to the same format (as text). Mainly I need code that would format numbers like 25, 25.36 or 254.60 to numbers looking like this 000002500, 000002536, 000025460. They must be of nine digit length with the last two digits as decimals.
View 9 Replies View RelatedWhen working in Excel I format all numbers with the accounting format. I often use the single and double underlining feature on the Font tab of the Format Cells dialog box. Sometimes when I use the double underline it only puts (and prints) one underline. I've worked with the formatting many times with little success. The only way I can get the double underline to show up in this situation is to change the vertical cell alignment to be centered and then increase the cell height. This causes me other formatting heartaches. It's like the double underline is there it just will not show.
View 9 Replies View RelatedIs there any way that I can format a cell to insert a colon three spaces to
the left from the end of any group of numbers that I type in the a cell?
Examples 9:15 10:15
in A1 I have a drop down list with unit numbers and descriptions
example - 123456 - 30 to 150 lots
I want to see if when I pick from the drop down list the right unit and description that the cell will only show the first 5 digits.
example I pick 123456 - 30 to 150 lots in cell A1 would say 123456
In excel if you press F5Special, you will be given to select cells with some criteria but there is no criteria to select cells with zero value in a selected range. Is any such option is available in excel or a macro is needed for the same?
View 9 Replies View RelatedI am trying to pop open a messagebox if a cells interior color index = 3 in a named range.
Private Sub Workbook_Open()
If Sheet1.Range(" Schedules").Interior.ColorIndex = 3 Then
MsgBox "One or more Trainee requires more than TWO HOURS PER WEEK to forefill his log book requirements"
End If
End Sub
(3) examples when I type a number to a cell:
If I type a number "1", I want that cell to show 1.000% but not 100.000%.
If I type a number ".2", I want that cell to show 0.200% but not 20.000%.
If I type a number "25.5", I want that cell to show 0.255% but not 2550.000%.
I play around with the below custom format cells but they do not work.
_0.01*#.000%
_0.01*#,.000%
0.01*#,.000%
I could use two cells one for number, other cell has a % mark. But I rather to format a single cell if it is possible.
I have the following format in Excel, how I change to show just year as when I go to format, cells, it appears to be customed to be h:mm:ss but I need it as yyyy, which if I change to it shows 1900..
2002:09:00
2002:10:00
2002:11:00
2002:12:00
2003:01:00
2003:02:00
2003:03:00
2003:04:00
In the formula =A1&" "&"Statement Value". I would like to show the value of A1 as a Month (Aug) rather than 40056. The formula is in cell J1 and A1 is a link from another sheet formated as a Month. The result would update as the value in A1 get changed.
View 4 Replies View RelatedIs there a way to format a cell based upon a condition? If the cell value is <1, I want to show two decimal places. If the cell is >1, I want to show zero decimal places. I tried to use the conditional formatting, but there is no option for this.
View 3 Replies View RelatedZ3=Z4 in a "ddd" date format
Z4=mm/dd/yy (this is auto populated)
What I want in Z3 is for it to show the ddd format for the day of the week (which I have done), BUT I want it to be blank if there is nothing in Z4.
I am trying to show the all possible combinations of a set of numbers in Excel, in my case I think permutations are more appropriate to use. For example: there are three numbers 1, 2, 3 I want to show results like:
1, 2, 3
1, 3, 2
2, 1, 3
2, 3, 1
3, 2, 1
3, 1, 2
The functions in Excel available only give the total number, but I want to see these combinations!
I want to have a cell report the sum of a column and have that sum change depending on which values I have filtered on another column. I have a cell reporting a sum of times in column E, but if I filter Column F to show only jobs for 1/16/09, I want that number to display the total time for just those shown. At this point, it just shows the total regardless of what is filtered.
View 3 Replies View RelatedI have over 2000 cells like the following
S304
S205
S204
S306
S207
and so on
Is there anything I can do to show just the numbers and not the S at the start without me having to delete each S individually?
I need a formula to show the numbers as they are when they are below 30, but when they go above 30 I need it to display 30 every time. I have attched a file.
View 3 Replies View RelatedI need to enter dates for the previous year, is there any way of formatting the cell to show the dd/mm/2011 when I format a whole column?
View 2 Replies View RelatedSheet1 AB120091002Valid220090702Valid320100702Not Valid Excel tables to the web >> Excel Jeanie HTML 4
In this A column Shows Year month Date format I need VBA Coding.
If A column is Grater than Today date Means B Column States Not Valid. Else Valid.
I would like to format a row of cells. I want each cell in the row to contain (and show) both an interger and text. The interger will range in value from one to ~10,000. The text will always be two characters long...but these characters will change from cell to cell.
Elsewhere in the spreadsheet I will have a cell (w/ a formula) that counts the values of the intergers in the row, but ignores the text in each cell.
a procedure for format ing the cells in the row?
I'm trying to get an excel custom number format to show the difference in two dates as 0 years and 0 months...for e.g.
Cell a1 = commencement date = 1/1/05
cell a2 = expiration date = 12/31/10
Then cell a3 = Lease Term = 6 years 0 months.
is there a way in VB to make it fast, and tidy, clear the contents of all unlocked cells on one sheet ?
View 2 Replies View RelatedSo I have a bar chart with numbers as its data labels...so each bar is divided into 4 colors equaling to 100% ...how can i show percentages next to numbers in the chart...so for example if a bar equals to 200 and each color is lets say 20, 60, 40, 80 ...i would like to show these numbers as well as percentages..i know we can do this manually by inserting a text box but the percentages might change quite often and i dont want to go through the hassle of calculating and changing them each time.
View 1 Replies View RelatedThe current method I'm using to get the results I need in Excel are a bit manual and excessive. is a simple all in one formula for what I'm trying to do,
The data is 3 rows. We can also assume the data is in the first three columns starting from A1.
698
885
499
As you can see in the above set from 0 through 9, the numbers that are not listed are 0,1,2,3,7
And As you can see the numbers that are listed are 4,5,6,8,9.
How do I find and show which numbers from 0 - 9 are not in the set.
How do I show the number that are listed in the set Example:
Note: the special characters aren't needed.
698 4,5,6,8,9 --- 0,1,2,3,7
885
499
Note the the evaluation is for every three rows. So the three rows in the example are from a table with 150 rows. Each row begins a new evaluation for the next three.....Example:
698 and the following two starts the next set
885 and the following two starts the next set
499 and the following two starts the next set
and so on ......
Over in the following thread
[url]
you can see we've hit a problem with the Calendar Control object.
I submitted a workbook which has an Activex calendar control embedded on a User Form. On my PC everything appears as you'd expect, with the calendar showing the individual days in the calendar matrix. However when the user loads the form on their system, although they see the calendar as you'd expect, and they can change the month & year at the top of the calendar, they don't see the individual day numbers, 1,2,3 etc. within the body of the calendar.
if i had a group of numbers , for example, the scores would be 30, 40 , 50 , 60 , 70 and 80 , how would i group that. like it would show me how many scores are between 30 and 50 , it would show up as 3 , then between , 51 and 60 it would show 1
View 2 Replies View RelatedWhat formula can I use to return the value in column A if the value is found.
Something like:
=LOOKUP($M$1,$B$18:$O$31,give the value in Column A of the row of where the result is)