Format Email Generated By Sheet To Have An HTML Format
Jan 24, 2010
I'm trying to format my email generated of excel sheet to have an HTML formal before they are sent out using MS Outlook.
I have googled, searched your forums and also tried to figure out a solution with the existing helps on the internet. I need help on how to format emails genarated out of my excel sheet. I know a bit of HTML syntax but a newbie to VBA. I'm guessing the formatting has to be done in the Emailbody text function in my code.
I'm also trying to understand the logic behind the code and also learning excel vba bit by bit at the minute.
View 10 Replies
ADVERTISEMENT
Dec 16, 2002
How to covert a Excel worksheet to HTML format as outlook's stationary and then call out Outlook to send it as a normal HTML mail, not a attachment mail?
View 4 Replies
View Related
May 4, 2014
I have written the VBA code to color any figure above 15, but it display rows above 15 as red including other rows.
Below is the VBA code
Code:
Sub FillCells()Dim lRow As Long, lColumn As Long
'Using Cells property to refer to range
'Loop through rows
For lRow = 1 To 10
'Loop through columns
For lColumn = 1 To 5
[code].....
Which shows the output as Workbook1.jpg But my query is how to get only rows above 15 with red color
View 8 Replies
View Related
Jan 11, 2009
If it is possible to do, how do I change this message format to html so that I can paste an image into the message?
View 5 Replies
View Related
Jan 20, 2008
I have been using code to save a collection of my reports in html format that has work very well until I was forced into using Vista and office 2007. Here is a snippet of the code that no longer works - at least I suspect this is the main problem.
View 4 Replies
View Related
Dec 22, 2008
I want the same affect as copy a table and pasting into the email. So i guess i need to copy a range and save as html in a string. It seems like it would be simple since its just copy and paste into the email, but i've been unable to find anyting on it.
View 3 Replies
View Related
May 19, 2009
Everything works except one thing. The time in Column C is being pasted into the email in decimal format. How can I alter this to keep the time format?
View 5 Replies
View Related
Jan 24, 2010
I've got a range of data contained in 2 columns to be sent out by email. The problem is that the data in the email looks like;
Gas Meter Reading
123456
and I want it to look like;
Gas Meter Reading 123456
View 5 Replies
View Related
Jan 4, 2012
I have a format and i want to put information in the format and send email only format not all workbook . i use also outlook for Email
View 9 Replies
View Related
Jan 18, 2009
I’m creating a spreadsheet to control corrective actions. Each corrective action will have a date that it needs to be completed by. When the completion date plus one day is passed, I need the cell that the completion date is in, to turn a specific colour and a warning mail to be sent via outlook When a further six days have passed I need the cell to turn a different colour again and another email is sent
Ive generated the following code to call an Outlook subroutine if the correct conditions are met. The subroutine runs ok but I can get the sheet code to run.
Private Sub Worksheet_Change(ByVal Target As Range)
If Not Intersect(Range("A1"), Target) Is Nothing Then
If IsDate(Target.Value) And Now() = Target.Value + 1 Then
Target.Interior.ColorIndex = 3
Call Mail_with_outlook
ElseIf IsDate(Target.Value) And Now() = Target.Value + 6 Then
Target.Interior.ColorIndex = 5
Call Mail_with_outlook
End If
End If
End Sub
View 9 Replies
View Related
Feb 12, 2009
I have been trying to find an easier way to make sure that the email address that I have been given in a excel workbook are in the proper format before I try to use them. I have tried doing a google search on this subject but have not found the correct solution. I want to enter a function in column L that would use a regular expression for the email format and compare it to the email address in column J. If the results are true place a value of 1 in column K. If false place a value of 0 in column K.
View 2 Replies
View Related
Jun 5, 2012
I'm attempting to put multiple lines of text (not one huge string) in the body of an email. I've tried Chr(13), Chr(10), vbcr, and vblf....all to no avail.
Sub AttachEmail()
Bk1 = ActiveWorkbook.Name
Sh1 = ActiveSheet.Name
[Code].....
View 5 Replies
View Related
Mar 14, 2014
I have the following code to do something similar to above but I need to add the filepath as a hyperlink to the email along with the body text. I have 4 cells in the Excel workbook that contain 1) Who to sen to:, 2)The Subject:, 3) A sentence for the Body of the email and 4) The filepath of the workbook as a hyperlink.
I want to add both the Body text and the hyperlink to the email so that the person opening the email can click on the link and open the file.
[Code] ....
View 10 Replies
View Related
Nov 22, 2013
I have this code as seen below that sends an email.
I would like to change the font size of - mymail.body=
How can I modify this existing code to achieve that.
Code:
Set myOlApp = CreateObject("Outlook.Application")
Set mymail = myOlApp.CreateItem(olMailItem)
mymail.Subject = strSubject
mymail.Body = "WHAT DO YOU PUT INTO A BOX ?"
mymail.Display
mymail.ReadReceiptRequested = False
mymail.attachments.Add "P:SR.xls"
mymail.to = "email@email.com"
mymail.Send
View 4 Replies
View Related
Jun 26, 2014
Below I have my code that works great. What I would like to do is make it pull the .HTMLBody from a cell value instead of inbeded in the code so users can change, just like to I have it below for who I am sending it to. The issue is if I do it the same way I loose my signature and the font, size and color I have below. How can I do this.
range("P16") would be the 1st line of the mesage
range("P17") would be the 2nd line of the mesage
range("P18") would be the 3rd line of the mesage
All the sendkeys below copy a range and paste it below my message as a picture currently. That is fine.
[Code] .....
View 1 Replies
View Related
Jul 22, 2013
I am trying to use VBA to send emails in HTML format including hyperlinks.
I am using the syntax HREF = ""....
View 4 Replies
View Related
Aug 10, 2009
I have created a userform but I am having extensive problems with the date formats.
My system is set to UK and short date is set to: DD/MM/YYYY
When I used code to add the values in the userform to the spreadsheet, any that contained a date format would revert to the US format.
So I finally figured out to use DateValue to format it correctly for example: ...
View 2 Replies
View Related
Jun 7, 2006
I have a column of cells with values - 0.2%, 0.32%, 0.22, 0.5 etc. The cells with % symbol are in ' Percentage, 2 decimal' format while the plain numbers are in 'General' format i.e. column contains cells in either of these formats. I need a macro where I can specify the column and it will select the cells with the % format, convert it to 'General' and multiply the result by 100 eg. 0.2% converted to 'General' becomes 0.002. When multiplied by 100, result is 0.2 i.e. is displayed without the % symbol.
View 7 Replies
View Related
Mar 31, 2014
One of the reports I run provides me information on lengths of time. Such a field displays as |0:09:16| indicating 9 minutes and 16 seconds. However, when the report generates the excel spreadsheet it saves these cells in date/time format ([h]:mm:ss). If I were to convert this field to the number format (so I can manipulate and graph it) it displays as such |0.00643460648148148| Ideally I would be able to have the data in the field stored as |556| (556 seconds, or 9 minutes 16 seconds). I have thousands of fields that I need to manipulate where the data is stored in this format and I can not figure out how to fix it.
View 5 Replies
View Related
Oct 15, 2009
How can I format cells to contain Minutes, Seconds and Hundredths of seconds to be used in calculations eg 1.24.99 means 1 minute and 24.99 seconds. Example calculation is: 1.24.99 - 1.24.90 =0.0.09
View 2 Replies
View Related
Feb 11, 2009
I need to format some climatic data from a weather station into a desired format. There are a lot of cut&paste and transposing involved. I think it will be easy but tedious for anyone trained in VB to write a macro but unfortunately I am not. I've tried recording a macro but it turns out that it is not general enough to deal with all the spreadsheets that I've got.
I've attached a spreadsheet which shows the original format (in sheet 1) and the desired format (in sheet 2). To briefly describe, I only need the temperature data for 8am and 2pm, the rest of the information in sheet 1 is useless to me.
View 2 Replies
View Related
Oct 26, 2012
Every month, I have an import a report to a spreadsheet. At my column A, it supposed to be a date format.
For some reasons, I have a combination of a few cells of date format and a few cells of general format with no order at all.
What I need is: Search in the A column, if date format leave it , if not change from general to date format.
View 2 Replies
View Related
Aug 1, 2013
I have an Excel 2010 spreadsheet where the default number format keeps switching to the date format. I keep switching it back and it'll stay as a number format for a time, but then it'll switch back. This is also the case for any new worksheets in that one spreadsheet.
This only happens with this one file - everything else behaves according to my regional settings or to how the file had been previously formatted.
View 3 Replies
View Related
Dec 19, 2006
I have a Sheet ( Named "Summary" for Example ) of about 4,000 Rows that has a LOT of Conditional Formatting.
I Added Another 100 Rows this Morning and when I Tried Saving it a Message Saying that Not All the Formatting for the New Data that had Been Added had Been Saved. Is there a Macro or Something I can Run that will Make the Conditionally Formatted Cells Stay the Colour that they are but Delete the Conditional Formatting Part of it Achieved Using "Format" & "Conditional Format" from the Menu Please.
Ideally I would like to be Able to Enter the Number of Rows ( From Row ? to Row ? ) that I want this to Apply to.
View 9 Replies
View Related
Feb 3, 2007
I have a forecast which is sorted by product code by week vertically. I need to create a lookup to re-format this information into a horizontal format by week. I have started this by transposing the information as my attachment shows but I am hoping there is a lookup formula which will be easier and quicker. I have attached the actual document and the data I want to sort is Sheet 2. I have started in Sheet 1. I want to look up the code in column A, then lookup the week number which would be B2 in Sheet 1 and return the value of that Code in that week from Sheet 1.
View 2 Replies
View Related
Jun 12, 2008
I would like to have a single button that changes a range of cells from the USD to EURO to perhaps CAD symbol. Can this operation be performed, such that if I start in dollars, and I click the button once, it shifts by range to EURO (not formulas...just symbol)...and then if I click the same button again, it goes to CAD, and then back to USD with a third click?
View 5 Replies
View Related
Jan 2, 2014
I'm having an issue with some emails that I send out automatically. I use Ron de Bruin's code to send with the Range to HTML function from Mail Range/Selection in the body of the mail.
My issue is when I view in OWA, all the formatting is lost. There is no issue viewing in Outlook itself, but some of our sales people use the web app and the view is corrupted. Back when I did this manually, I would just copy and paste the range of cells into the body of the message, and there was never any problem with formatting in OWA.
Is there a setting that needs to be changed, or have code for pasting a range into the body of a message that works?
View 1 Replies
View Related
May 1, 2014
I have around 30k data. which is in invalid format.
Ex: 12987654321vinay kk 876543219
32567456789 kkccjhg fo 345678921
I want to convert this into correct format as below with start letter from
MOD, 987654321,, vinay, kk,87654219
MOD,567456789, , kkccjhg, fo,345678921
I want to know which are formulas I have to use to get this info in correct format.
View 1 Replies
View Related
Mar 1, 2007
In order to export an excel table into another program I first need to save the excel file as .txt. The .txt file can then be imported by the other program.
First I however need to make excel understand that the value should be a text and not a value. I therefore format the number as text (0000150235) by adding "0000150235". After saving the file as .txt the format changes from "0000150235" to """0000150235""". I do however need the format in the .txt file to be "0000150235". Can anyone tell me how I can save "0000150235" as .txt and get the value "0000150235" in the .txt file.
View 14 Replies
View Related
Apr 12, 2012
I have a range which has conditional formats based on other cells. I want to copy this range into another sheet and retain the current formats as fixed formats without copying the conditional formulae. ideally in VBA.
View 5 Replies
View Related
