I have 30+ Textboxes on the form.
In the process of entering data the textBoxes get different .BackColor settings.
When the reset command button is hit the boxes stay the same colors, so I could reset them with a single command rather than 30+ lines of formatting code.
I have a Userform and 2 text boxes that require users to enter a date. I really need the users to be forced to enter the date in "mm/dd/yy" format or they cannot get passed that text box or at least an error comes up.
View 2 Replies View RelatedI have a userform that one textbox takes it's value from a cell in sheet3.(k2). The format of this cell is currency. How the textbox takes the same format as the cell?
In the same userform i have a series(prcase1,prcase2..) of textboxes that i want to have currency format as the user type numbers on these.
How can i do this?
When opening up a userform I'm attemping to change the value of a range of textboxes ( 6 to 18) to 0.00.
To do so I used the following code which is controller by a command button
Private Sub CommandButton1_Click()
Dim i As Integer
For i = 6 To 18
userform1.textbox(i).value = format(0,"#,##0.00)
Next i
userform1.show
End Sub
It keeps stalling at "textbox(i)"
A simple solution I'm sure.
Simple problem I'm
I have a total of 648 textboxes on my form. Some of the textboxes allow for char values, some numeric and some monetary. The problem I am running into is with the monetary. I am trying to say on initialize, I want to autoformat 208 of these textboxes to $0.00 and when the users puts in an actual amount it changes to $100.00 or whatever the amount. It would be ideal to just have the textbox blank and when the users puts in something it is formatted automatically to $100.00. Just like I would if I were formatting an Excel column or cell. Here is my code so far: (hopefully no typos in code. Cannot copy and paste as using home computer. My work computer blocks the excelforum site.
[code]....
Is it possible to format a textbox on a userform so that it displays as time?
View 1 Replies View RelatedI've got a workbook (attached) with a UserForm that summarizes transactions entered in columns A and B based on the entry (color) in column A. If you click on the Button (Summary (Show/Hide)) it brings up the UserForm.
A couple of issues I've struggled with:
1. I'd like the UserForm to open when the workbook opens.
2. I'd like the UserForm to update as entries are made in Columns A and B when the user tabs out of column B
3. I'd like the UserForm to always stay open; the user cannot close it.
I've got the same data in cells G26:M34 but these cells don't "float" as the page moves down. This is the reason I've gone to a UserForm to accumulate the data.
I was just wondering if there is a more efficient method. I have a UserForm that requies textboxes to be filled. I have a commandbutton1 on the form called "next" which is only enabled after all the fields have been filled. If any field is blank, I want the commandbutton "next" to be disabled. I have many UserForms so I wanted to see if there is another way than my own primitive method - I have a code for the change event of each textbox
Private Sub TextBox1_Change()
If Me.TextBox1 = "" Or Me.TextBox2 = "" Then
Me.CommandButton1.Enabled = False
Else
Me.CommandButton1.Enabled = True
End If
End Sub
Private Sub TextBox2_Change()
If Me.TextBox2 = "" Or Me.TextBox1 = "" Then
Me.CommandButton1.Enabled = False
Else
Me.CommandButton1.Enabled = True
End If
End Sub
Private Sub UserForm_activate()
Me.CommandButton1.Enabled = False
End Sub
I am working on creating a userform to make sure that information gets entered correctly into a spreadsheet. This is a rather large user form with numerous text and list boxes on a number of tabs. I also have a toggle box at the top of the form that helps choose what sort of data I will be needing. When the toggle box is selected I only need about half as much information and do not want users to be able to enter the rest. I am looking to enter code that changes the enabled property of the unneeded boxes to false when the toggle button is selected and back to true when it is clicked off. Unfortunately, this involves about 50 text/list boxes. Things are going to get very messy if I need to write out a seperate line for each of these items.
My question is this. I know there is a way to group these boxes and change the properties of the group as a whole in the editor, but is there a way to refer to such groups and their properties in my code.
Here is my case:
I have made a userform called "frmvakanties"
this form contains a certain amount of textfields in wich the user should be able to put dates (d-mm-yyyy)
the userform also contains a OK button, wich is called cmdOK.
in the the Private sub cmdOK_click it says:
Dim txtNwJrvan as date
unload me
So far no problem.
For this question i just take one of the textboxes, wich is called 'txtnwjrvan'
Now have my vb module. I wrote there: 'frmvakanties.Show'
When i run this program, I get the userform with the unfilled textboxes, fill them with a date and press OK.
this is where my problem is: after frmvakanties.show i've typed
msgbox (frmvakanties.txtNwJrvan)
I do get a msgbox, but it is empty!
I just made this msgbox to check what date it returns, since i need the entered date for further use in my script.
I have a bunch of TextBoxes on a UserForm, and I would like to create a Sub to clear all of them. Something like that:
For I = 1 To 10
NameBox = "TextBox_Area" & I
For Each objControl In UserForm1.MultiPage_1.Pages(1).Controls
If TypeOf objControl Is MSForms.TextBox And objControl. Name = NameBox Then
objControl.Text = ""
End If
Next objControl
Next I
But of course there is no Text method for Controls. And I cannot loop directly through TextBoxes instead of Controls. So what can I do ?
I have a userform with three textboxes.
1. txtStartDate
2. txtDateofBirth
3. txtAge
What I would like is for the txtAge box to be populated once dates have been entered into the other two textboxes.
It needs to be the person's age as calculated between the Date of Birth to the Start Date.
I've got a UserForm that contains 31 TextBoxes ( Named Text1, Text2, Text3 ... Text31). I want to format the Textboxes depending on the values stored in a Sheet - these values are stored in the first 31 rows of the Sheet and each row coresponds to only one TextBox. I need to know whether there is a way for the code to recognize that the values for the first row influance the format of the first TextBox (TextBox1), the second row influences TextBox2 and so on and so forth. The code should then set a range and assign each of the 31 rows to each of the 31 Buttons. Therefore the question - can a part of the name of a TextBox become a variable and be mached with the coresponding Row Number?
View 2 Replies View RelatedI am looking for codes to clear the textbox fields while the existing codes transfer the information to the execel page. I have programmed it to transfer the data to the sheet but I can't write the codes to clear the textboxes for the next entry.
I want to program the same command button to transfer the data to the sheet and clear the textboxes simultaneously.
VB:
Private Sub CB2_Click()
Unload UFH1
End Sub
Private Sub L1_Click()
[Code].....
I have a userform that has 3 sections. In each section are a number of text boxes which, following input of a value in the first text box in the section (master box), self populate with data from a spreadsheet.
This works apart from when I change the value of one of the first text boxes. Is there a simple bit of code that if on the change of the value in the master box will reset the 'dependent' text boxes to empty?
I am trying to get two text boxes on a userform to populate a third box on the form when the user inputs the data in both of the first two boxes. I am pretty sure i need to use a change event, but I am not sure how or what triggers them. so I have:
[Code] ....
but they don't work when I put data in VSShortPrem and VSLongPrem textboxes. Do I need to call them to the userform module?
When the user choose a customer from a combo box then i need to get some statistical results in the text boxes, such as last amount of credit-charge, last date, and amount that he has to pay us until now.
When user adds a new amount in the grey textbox then this has to be added in the previous amount.
I have the expected results of my example in my sample sheet.
I have a userform with many comboboxes and textboxes and I am using the following code to empty those controls:
View 9 Replies View RelatedI have seen a lot on how to do this with a listbox, but i need to do it with textboxes. I have 30 textboxes in order and would like to have two buttons (1 For move up and 1 for move down) to move the value from the current textbox in focus (active) and swap it up or down.
View 7 Replies View RelatedI am trying to create some VBA code, which will average the contents of up to twelve textboxes on a Userform, and then put the average in the next one.
I have sorted this, HOWEVER.. I have a couple of problems.
The average isn’t correct Some of the textboxes may be blank, and therefore should not be included in the calculation
Here is my code
Private Sub CommandButton3_Click()
Dim results(12) As Double
Dim ave As Double
results(1) = CDbl(TextBox5.Value)
results(2) = CDbl(TextBox6.Value)
results(3) = CDbl(TextBox7.Value)
results(4) = CDbl(TextBox8.Value)
results(5) = CDbl(TextBox9.Value)
results(6) = CDbl(TextBox10.Value)
results(7) = CDbl(TextBox11.Value)
results(8) = CDbl(TextBox12.Value)
results(9) = CDbl(TextBox13.Value)
results(10) = CDbl(TextBox14Value)
results(11) = CDbl(TextBox15.Value)
results(12) = CDbl(TextBox16Value)
ave = Application.WorksheetFunction.Average(results)
TextBox17.Value = ave
End Sub
I've been trying for hours to populate a textbox on a userform based on a combo box. I'm including a zip of my workbook to see. (don't laugh to hard at my code, like I said I'm green...:) When you select a mix design in my form I want the next six combo boxes to populate. The way I have it now is based on one of the many examples found here, (none of which have worked for me so far, but this one said "the simplest way to do this is......") And I get an error 425 - "Object not found". I've done searches based on the error but haven't found an answer.
View 4 Replies View Relatedre: Validating Textbox to work on a simple form.)
View 2 Replies View RelatedI have a form using in Excel 2003 that's 5 columns and 20 rows I need to populate the Textboxes with values from a worksheet. I want to use a loop statment that fills the first row, then increments to the next row until all 20 are filled. I have named each row the same name except the last character is the row number 1-20.
ie on the form textboxes named:
NameRow1 AddressRow1 CityRow1 StateRow1 ZipRow1
NameRow2 AddressRow2 CityRow2 StateRow2 ZipRow2
This is what I want to happen
Sub test()
Dim RowNumber As Integer
Dim FormRow As Integer
Dim NameRow As Object
Dim AddressRow As Object
Dim CityRow As Object
Dim StateRow As Object
Dim ZipRow As Object
RowNumber = 3 'Row in Data sheet
FormRow = 1 'Row on form
NameRowString = "NameRow" 'first part of the named object
Do While FormRow < 21
NameRowVar = NameRowString & FormRow................
I have a user form that with a textbox on that I want to use a search tool, then display the outcome on the user form. the worksheet has 3 columns in titled Name, Description,Contact number. What i want the form to do is when I place the comapny name in the text box on the form and press enter it will look though my table on the worksheet and display the Description and contact number on the form. I am not sure if I will need to place a frame or text box onto the form for this as of yet all i have is the textbox.
View 5 Replies View RelatedI have a userform with a number of textboxes where the time is entered in the format like 00:00, (24 hour clock).
What I need is code to calculate the time in minutes / hours between 2 of these textboxes and for the result to be displayed automatically in the third textbox with no user input required, (other than to put in the start and end times).
The third textbox must display the result in the same format as above - here is the code I use to get the textbox to force the time in as above;
Code:
Private Sub TextBox3_Change()
Dim t As Date
'If they enter 4 digits and NO colon e.g. 1400
If Len(TextBox3.Value) = 4 Then
[Code] ......
My data resides in a workbook in sheet2 and sheet3. I have 4 comboboxs refering to different columns in sheet2 and sheet3. Basically when the user selects all the four comboboxs, the criteria should be satisfied and the results in terms of rows matching those values should be shown in the textboxs below.
Each three of the textboxs refers to individual columns in sheet2 and sheet3. All I want to do is simple search criteria on both sheet 2 and sheet3 and put the results in textboxs.
I have populated my comboboxs but dont know the macro to do the search results .
my userform,which has 4 comboboxs
combobox1 = sheet2 column C
combobox2 = sheet2 column BL
combobox3 = sheet3 column K
combobox1 = sheet3 column F
The results which satisfy the above 4 criteria should come from ,when user presses POP UP DETAILS BUTTON,
textbox1= sheet3 column C
textbox2= sheet3 column N
textbox3= sheet2 column T
Actually I have many records which satisfy the above 4 criteria, dont know how to display them whether in textbox or any another method.
When I enter values in the userform textbox and press update button i need to copy whole row of data which is next to the textbox from userform to database sheet. (Copy only if data entered in the textbox).
Basically if textbox has a value in userform row 1 and it has a value copy it to database sheet if not skip and if value is in other texbox copy other rows.
The worksheet sample attached : example.xlsm
[URL] .....
I would like to ask if there is a possible way for a Label to display information that are based on multiple textboxes? All the information are based on the textboxes and listboxes that are in the userform and will be displayed on the Label (label16)
userform.png
**Cross reference link: [URL]
I have a user form where people fill in data into text boxes. some text boxes remain hidden if the user does not need to fill in the requested field. but when the command button is submitted all text boxes hidden or otherwise are copied to clip board.
VBA in order for only visible text boxes to be copied to clip board. I was thinking of some sort of if statement around the vba to copy to clipboard but nothing i use works.
I have created a userform thats extracts data from a worksheet, pace a command button on the form that will send the info in textboxes to a word document.
I did attempt this but even reading how didn't make sense. I have placed book marks on my doc (RTWdoc) ready. bookmarks are named textbox1, textbox2, etc, for ease of reference so they match textboxes on userform1.
word.doc and workbook are in same folder.