I have a userform that one textbox takes it's value from a cell in sheet3.(k2). The format of this cell is currency. How the textbox takes the same format as the cell?
In the same userform i have a series(prcase1,prcase2..) of textboxes that i want to have currency format as the user type numbers on these.
How can i do this?
I have a UserForm with a ComboBox for the currency (30-35 items) and a TextBox for the amount.
The currency codes are displayed like this: EUR, USD, RUB, GBP etc.
How do I paste the result of TextBox in a selected currency format in a cell in worksheet?
Example:
ComboBox value is "USD"
TextBoxValue is "500"
Cell A1 value should read "500 USD" as currency not text.
I have a Userform and 2 text boxes that require users to enter a date. I really need the users to be forced to enter the date in "mm/dd/yy" format or they cannot get passed that text box or at least an error comes up.
View 2 Replies View RelatedI have 30+ Textboxes on the form.
In the process of entering data the textBoxes get different .BackColor settings.
When the reset command button is hit the boxes stay the same colors, so I could reset them with a single command rather than 30+ lines of formatting code.
When opening up a userform I'm attemping to change the value of a range of textboxes ( 6 to 18) to 0.00.
To do so I used the following code which is controller by a command button
Private Sub CommandButton1_Click()
Dim i As Integer
For i = 6 To 18
userform1.textbox(i).value = format(0,"#,##0.00)
Next i
userform1.show
End Sub
It keeps stalling at "textbox(i)"
A simple solution I'm sure.
Simple problem I'm
I would like to have a single button that changes a range of cells from the USD to EURO to perhaps CAD symbol. Can this operation be performed, such that if I start in dollars, and I click the button once, it shifts by range to EURO (not formulas...just symbol)...and then if I click the same button again, it goes to CAD, and then back to USD with a third click?
View 5 Replies View RelatedI have a spreadsheet which needs to display currency in the correct format dependant upon whether a contract is in English or German Law. Excel defaults currency format as €310,000.00 however in German this needs to be €310.000,00 i.e. with the decimal point and comma in opposite positions. Does anyone know what expression I can use to format it as the latter?
View 2 Replies View RelatedI have a textbox on a form that has a default value of 0.00. When the user enters a number I want it to format it to currency with two decimal places. I've tried form.textbox1.text = formatcurrency(textbox1.text,"0.00") but it won't format it to two decimal places.
View 2 Replies View RelatedI am having a problem defining a currency format based on an IF statement. My statement looks like this......... =IF(E22=1,"USD",IF(E22=2,"CAD",IF(E22=3,"EURO","USD")))
What I want is to show $ when USD or CAD is returned and € when EURO is returned.
When using the formula '= CELL("format",G3)' the result is ',2' for Euros, US and Canadian Dollars. As you can see in my spreadsheet this does not enable me to calculate sums (ie. Total Canadian Dollars) using the currency format. Is there something other than "format" that would get a more precise result that would differentiate between currencies?
View 7 Replies View RelatedI need to be able to format a textbox as curancy. Simple enough, right?
The problem is that this box is loaded from two sources. The first is automatic using the change event, this works well. The second is to enter directly into the textbox, which requires using the exit event, this also works.
The problem comes when I try to use both events. The change event interfers with the direct entry (the format keeps changing the entered value and will not allow the user to finish entering).
Private Sub TextBox1_Change()
TextBox1.Text = Format(TextBox1.Text, "$ #,##0.00")
End Sub
Private Sub TextBox1_Exit(ByVal Cancel As MSForms.ReturnBoolean)
TextBox1.Text = Format(TextBox1.Text, "$ #,##0.00")
End Sub
How can this be changed to work for both aut load and direct load?
The negative numbers in my currency format does not have any numbers with parenthesis or minus, is there any way that the default format can be changed other than always trying to use a custom format.
View 5 Replies View Relatedi want to know how to numberformat numbers (Currency) into thousands,lakhs.
For example i m having amount in colmun D like 1239.00 i want to format the numbers in this column as Currency with thousand seperator and lakh seperator. like1,239.00 or 1,23,900.0
I have a problem with the currency format with 4 decimal places.
Sub go()
Range("C5") = Range("C5") + Range("C4")
End Sub
as you can see it adds the conecnt of "R4" to what is in "R5"
If works fine when the calls are formatted as number with 4 decimal places.
example if R4 is 0.1111 and R5 is 0.2222 after running the macro R5 becomes 0.3333
But if the cells are formatted as currency and 4 decimal places the then excel returns $0.3300
I have a list of sales made during a certain period. They are either in £ or $ and are in a list. Essentially like this (but with lots more info):
sale1 £300
sale2 $450
sale3 £150
etc...
What I would like to do is to have two cells at the top which sum only the £ values and a cell whcih sums only the $ values. Is this possible?
My idea to was do a sumif formula based on the cell format of the sales value, but I can't see a way of doing this. The only other way I can see is to have a simple addition formula selecting only the certain cells i want, but this would be labour intensive to maintain, as the formula would need to be updated eachtime a new line is added.
I would like to set the format of a cell to the Japanese currency format. This means that the comma separator occurs at 4-digit interval instead of 3 (ten-thousand separator instead of thousand separator) like this:
1,000 -> 1000
10,000 -> 1,0000
1,000,000 ->100,0000
1,000,000,000 -> 10,0000,0000
and so on...
There are some rules with the decimals, but I will leave that out for now.
how to achieve this with either custom format or VBA, instead of initiating system changes?
AutoLinked keywords will cause extra spaces before keywords. Extra spacing is NOT transferred when copy/pasting, but IS if the keyword uses "quotes".
USD 100
EURO 100
Is it possible to automatically make it:
USD $100
EURO €100
How can make msgbox to appears on top left corner?
View 5 Replies View RelatedI am planning to use a userform to input various figures, and come up with a total.
How do I get the user form to display a figure as currency?
Also, how do I get the user form to display a figure as a date?
When I enter a number, say 2456 in this textbox why does it display "$2.45" instead of "$2,456". I've tried fiddling with the ###'s and .'s but it just gets worse.
[Code] ....
What I am trying to do is create a multi-currency expense report. For example, cell B1 has a drop down list of three different currencies. Based on the currency selected in B1, I want C1 to reflect that number formatting using the proper currency.
Im sure there is an easy way to do this but I have tried using an if statement in the conditional formatting section but it does not work.
how to total the different currencies using the ifsum formula, so this is more of a presentation task, but still it has annoyed me to no end.
In the example workbook, the currency value selected in row E should effect the currency formatting in Rows F-L
I would like to create a textbox that displays the typed numbers as currency format (similar to selecting currency format for a cell)
so that as the user types in 9999 they will see the textbox populate with
$99.99 instead of just $9.09 which is what happens when I try the following code
What I am trying to do is display my output in currency format. The catch is that the values I am using are not from cells, they are from text boxes that are locked on a user form. The first text box is a base rate with a value of "$2000.00". Second comes a quantity text box with an integer value of let's say "3". Last comes a markup rate which is a text box with a rate of ".10". The calculation is fine, it although it returns "$6600" when it is critical that I display the two decimal places at the end. Here is my code for the calculation:
Me.txtAirfare.Text = "$" & frmAirfare.txtBaseRate.Value * frmAirfare.txtQuantity.Value * (1 + frmAirfare.txtMarkup.Value)
I am struggeling to format a column to display currency values formated with a different currency mark than the local system currency. Right now, when I run the macro on my machine I get my local currency (Israely Shekel), and on the Client's machine I get Euro. (I need it to be in dollars)
View 6 Replies View RelatedIn the accounting number formats, the available currency symbols are Dollar ($), Pound (₤), Euro (€), and Yuan (¥). But how can I add a custom currency symbol? For example instead of writing "$1,000", I want to write "BDT. 1,000" or "৳ 1,000". How can I do that?
View 4 Replies View RelatedI have a userform where the user enters prices for up to 12 items in textbox controls, and these prices are stored in an array. The textboxes are titled tbPrice1, tbPrice2, etc. I'm having an issue with the line of code I am using to store the values in an array. Every time I attempt to store them, I get runtime error 13 type mismatch, but I don't understand why.
dim PartPrices(1 to 12) as Currency
For x = 1 to 12PartPrices(x) = IIf(Trim(Me.Controls("tbPrice" & x).Value) & vbNullString = vbNullString, CCur(0), CCur(Trim(Me.Controls("tbPrice" & x).Value)))Next
A little more explanation here. Not all 12 parts will have prices, so I use the IIf statement to store the value 0 whenever the user has left a price field blank. I use trim in case they leave spaces in the price textbox or something. When the field is not blank, I take the value entered in the textbox, convert it to currency and attempt to store it in the relevant element of the array.
I've got a workbook (attached) with a UserForm that summarizes transactions entered in columns A and B based on the entry (color) in column A. If you click on the Button (Summary (Show/Hide)) it brings up the UserForm.
A couple of issues I've struggled with:
1. I'd like the UserForm to open when the workbook opens.
2. I'd like the UserForm to update as entries are made in Columns A and B when the user tabs out of column B
3. I'd like the UserForm to always stay open; the user cannot close it.
I've got the same data in cells G26:M34 but these cells don't "float" as the page moves down. This is the reason I've gone to a UserForm to accumulate the data.
I was just wondering if there is a more efficient method. I have a UserForm that requies textboxes to be filled. I have a commandbutton1 on the form called "next" which is only enabled after all the fields have been filled. If any field is blank, I want the commandbutton "next" to be disabled. I have many UserForms so I wanted to see if there is another way than my own primitive method - I have a code for the change event of each textbox
Private Sub TextBox1_Change()
If Me.TextBox1 = "" Or Me.TextBox2 = "" Then
Me.CommandButton1.Enabled = False
Else
Me.CommandButton1.Enabled = True
End If
End Sub
Private Sub TextBox2_Change()
If Me.TextBox2 = "" Or Me.TextBox1 = "" Then
Me.CommandButton1.Enabled = False
Else
Me.CommandButton1.Enabled = True
End If
End Sub
Private Sub UserForm_activate()
Me.CommandButton1.Enabled = False
End Sub
I am working on creating a userform to make sure that information gets entered correctly into a spreadsheet. This is a rather large user form with numerous text and list boxes on a number of tabs. I also have a toggle box at the top of the form that helps choose what sort of data I will be needing. When the toggle box is selected I only need about half as much information and do not want users to be able to enter the rest. I am looking to enter code that changes the enabled property of the unneeded boxes to false when the toggle button is selected and back to true when it is clicked off. Unfortunately, this involves about 50 text/list boxes. Things are going to get very messy if I need to write out a seperate line for each of these items.
My question is this. I know there is a way to group these boxes and change the properties of the group as a whole in the editor, but is there a way to refer to such groups and their properties in my code.
Here is my case:
I have made a userform called "frmvakanties"
this form contains a certain amount of textfields in wich the user should be able to put dates (d-mm-yyyy)
the userform also contains a OK button, wich is called cmdOK.
in the the Private sub cmdOK_click it says:
Dim txtNwJrvan as date
unload me
So far no problem.
For this question i just take one of the textboxes, wich is called 'txtnwjrvan'
Now have my vb module. I wrote there: 'frmvakanties.Show'
When i run this program, I get the userform with the unfilled textboxes, fill them with a date and press OK.
this is where my problem is: after frmvakanties.show i've typed
msgbox (frmvakanties.txtNwJrvan)
I do get a msgbox, but it is empty!
I just made this msgbox to check what date it returns, since i need the entered date for further use in my script.