Formula =AVERAGE(B16:L16) To Give The Average

Jan 7, 2008

I'm using the formula =AVERAGE(B16:L16) to give me the average.

However I have a couple of problems with this. Firstly I would like to exclude the value zero from the average. Secondly to also ignore the lowest and highest values.

Example, if the values in the cells are 0,1,2,3,4,5,6,7,8,9,10 then the current result shows 5, by ignoring the 0 and lowest value 1 and highest value 10 the average should be 4.5.

View 9 Replies


ADVERTISEMENT

Average Column Of Cells But Ignore Errors And Return Average Of Numbers That Are There

Jun 14, 2013

E11 through E24 contains numbers and a few errors (#N/A) that need to persist (the errors need to show).

E10 needs to show the average of the numbers that are in E11 through E24, and just ignore the errors.

I have many columns like that - where the errors need to show and I need to show an average of the number/values that do appear, ignoring the errors.

View 14 Replies View Related

Average And Vlookup: Average The Grades With Appropriate Names

Dec 9, 2008

i have two columns...a and b (a w/ names, and b w/grades). then i have the table lookup with names and grades all mixed up for many rows. i want to be able to average the grades with appropriate names.

=average(vlookup(name, table, column, false))?? i don't get it to work and how can i specify the grade to average?

View 5 Replies View Related

Worksheet.function Average Returning Error "Unable To Get The Average Property Of The WorksheetFunction Class"

Jan 23, 2007

TotHCInv.Value = WorksheetFunction. Sum(KRInv, PBLInv, CRInv, PVInv)
If i >= 34 Then CPSCtphRMA.Value = WorksheetFunction.Average("G" & (i - 30) & ":G" & i)

The first line runs properly, but the second line bugs out with the error message "Unable to get the Average property of the WorksheetFunction class". I can simply do the math, but I thought that using the worksheet function would be easier than summing and dividing. I'm curious, though, as to why I can't seem to use the Average function.

View 3 Replies View Related

How To Get A Minimum Average And A Maximum Average

May 23, 2014

Can I get a minimum average and a maximum average, I have a worksheet with days of supply for 100 stores with about 100-200 products each, the dos resides in column D.

I was going to create a summary page and reference column d.

The following just gives me the min, I want the min average if possible:

View 5 Replies View Related

Grade Point Average Using AVERAGE IF AND

Sep 1, 2006

I am attempting to calculate Grade point averages for my students for all classes. There are 5 columns of grades to be considered. I frist assign values of 0-5 to the grades then average the points. My problem is that I want the AVERAGE to ignore the zero but it calculates it as well. (I enter a 0 if I have no grade for that class.) I have tried the{ } to make it an array formula but this also did not work. Here is what I have, can anyone help?

=SUM(AVERAGE(IF(AND(L2>89,L2<100),5,IF(AND(L2<90,L2>79),4,IF(AND(L2>69,L2<80),3,IF(AND(L2<70,L2>59), 2,IF(AND(L2>0,L2<60),1,0))))),IF(AND(T2>89,T2<100),5,IF(AND(T2<90,T2>79),4,IF(AND(T2>69,T2<80),3,IF( AND(T2<70,T2>59),2,IF(AND(T2>0,T2<60),1,0))))),IF(AND(AB2>89,AB2<100),5,IF(AND(AB2<90,AB2>79),4,IF(A ND(AB2>69,AB2<80),3,IF(AND(AB2<70,AB2>59),2,IF(AND(AB2>0,AB2<60),1,0))))),IF(AND(AJ2>89,AJ2<100),5,I F(AND(AJ2<90,AJ2>79),4,IF(AND(AJ2>69,AJ2<80),3,IF(AND(AJ2<70,AJ2>59),2,IF(AND(AJ2>0,AJ2<60),1,0))))) ,IF(AND(AR2>89,AR2<100),5,IF(AND(AR2<90,AR2>79),4,IF(AND(AR2>69,AR2<80),3,IF(AND(AR2<70,AR2>59),2,IF (AND(AR2>0,AR2<60),1,0)))))),-1)

I know it is huge. The syntax is correct. It calculates the average, but always for all 5 columns. It will not ignore a 0 in a column.

View 10 Replies View Related

Avoiding Average Of An Average: Times

Oct 11, 2006

Ok, I for some reason just cant wrap my head around this. I need to to get the average time per call of two rows, but they are based on how many calls taken.

so in one column i have 50168 calls taken at 4:21 seconds per call. and in the next row i have 597 calls taken at 5:20 per call. I need to see what the new average will be with them combined, and I need it to display in m:ss form.

View 9 Replies View Related

Formula For Average

Nov 7, 2007

Cell: F6 is to represent "average weekly offering".

D2:D53: represents the Total Given Year To Date.
I need a Weekly Average for Offering, so is it possible to have a formula that can show the average weekly offering in cell F6?

View 10 Replies View Related

Filtering & Average Formula

Mar 31, 2007

I'm building a yearly workbook with multiple worksheets (i.e. one for each month, quarterly reports and one final yearly report). My question is that although I can have the data transfer easily to my quarterly and year end report sheets, I can't seem to figure out how to filter my data and then calculate an average based on personnel averages in the various categories I have set up.

My example is that I want to be able filter my personnel shifts (i.e. 7am, 3pm, 11pm, etc) and then set up a formula which can for example calculate a column of data and average it only based on the employees working that particular shift. My formula should adjust for the shift time I pick.

View 10 Replies View Related

Complex Average Formula.

Feb 3, 2009

The number of columns vary, but the number of rows is constant. Lets assume, max_col is the number of columns and max_row is the number of rows per report.
Then, I need the following logic as VB macro.

for row = 6
F6 = (G6*G4) + (H6*H4) + (I6*I4)+...+ ("max_col:6" * "max_col:4") / (G4+H4+I4... "max_col:4")

View 2 Replies View Related

Average Formula (WHERE Clause)

Oct 26, 2012

I have a large amount of data in 2 columns which I want to statistically average to see if a relationship exists between two variables.

Column A: Contains Iodine concentrations ranging between 0 and 22000 ppm.
Column B: Contains Nitrate (NO3) concentrations ranging between 0 and 22 %.
I have over 7500 rows of data. In theory there is an endless amount of data but it will all be kept in these two columns

What I want to do is create average values of NO3 based on set Iodine ranges.

e.g. I want to know the average NO3 grade for the cells where the Iodine concentration is between 0 and 99 ppm.

I want to be able to calculate this average based initially on 100ppm Iodine bins but dont know what clause I would need to add into the formula or if this is even possible.

I would also like to be able to edit the bin size to see if I can discern a better relationship between the two using different ranges. As such I can create the bins in a separate column but again I don't know the best way to do this to make it work well in a formula.

View 1 Replies View Related

Formula For Average Calculation?

Jul 8, 2013

I have data regarding the percentage of QC for the team.

I need to find out the individual's average QC scores from the list already available.

The columns that is in the primary sheet goes like this: Date/Name/Comments/QC percentage

View 3 Replies View Related

Average Formula Returning DIV/0?

Mar 3, 2014

I am trying to average a data set where some rows at the moment are blank but will update at a later date, I am getting a div/0 error, the formula I am trying to use is

=IF(C23:C30="","",AVERAGE(C23:C30))

I thought this would look at the data and see if its blank leave it blank but if there are numbers there it would give me an average.

View 4 Replies View Related

Formula Average The Values

Apr 4, 2007

I am trying to do a stock ( goods) inventry for a catering industry, meaning most good swill keep havinf cost prices changing.

I am trying to use a LIFO system. To achieve the end result, i am trying an average formula and i am trying something as follows:

=SUMIF(I4:I20,">0",I4:I20)/COUNTIF(I4:I20,">0")

To try it out, i created a similar page with the same amounts but using a normal multiplication and division formula, the totals dont marry.

View 9 Replies View Related

Formula To Return An Average

Mar 11, 2008

I am working on formula to return an average of data.

Currently it is matching a text criteria.

Thus if (the text in) column a = (the text in) column b, (return the average of) column c.

The formula that I am using is =IF(A:A,B:B,AVERAGE(P:P))

This is returning - #value!

Now is this a formatting problem in column P? Or is the formula I am using incorrect?

I know that the text criteria (col A & B) matches.

View 9 Replies View Related

AVERAGE Formula Getting #VALUE! Error

Apr 30, 2008

I am trying to do an average of quartely results (2008 results) and because certain quarters can have no data present then my quarter shows 0%. But if i do a simple average of all Qs then the 0% affects my overall year to date. I need to keep the 0% because it may be a legit value. So i've devised a way to is if we actually have something in the cell (using isblank). So i test with isblank and if something is present then i use the Quartely value. It could be 50% or it can be 0%.

I would like to incorporate the snapshot but i can't because i do not have access to uploading a picture. If any of you wish i could email the pictures. When i test out my formula in different cells its works but when i combine them all together i get #VALUE! error.

In the example the error comes from the Q3 which test out and should give "" but when its added to the formula i gert #VALUE!. Shouldn't the average function disregard "" cells?

My formula is:
=average((if(and(isblank(F33),isblank(J33),isblank(N33))," ",R33)),(if(and(isblank(T33),isblank(X33),isblank(AB33)),"",AF33)),(if(and(isblank(AH33),isblank(AL33),isblank(AP33)),"",AT33)),(if(and(isblank(AV33),isblank(AZ33),isblank(BD33)),"",BH33)))

Maybe my logic is flawed or there is a better way to do it. Either way i would like your opinion on it.

View 9 Replies View Related

Daily Average Formula

Nov 13, 2009

I need to count the daily average of a task to a week ending number.
I need to see the current average after each day during the week. Example Mon = 2, Tues = 4 AVERAGE is 3 Wed = 2 AVERAGE IS NOW 2.6and so on averaging out after each day is added.

View 9 Replies View Related

Average Formula For Different Columns

Feb 1, 2010

Looking for an average formula.

All found formulas average within a string (ex. A1:F1).

My spreadsheet contains a series of three columns.

Example:
Column A reflects a number stat for a month (January).
Column B reflects another number stat for the same month (January)
Column C reflects the difference between Columns A & B.
Column D reflects a number stat for the next month (February)
Column E reflects another number stat for the same month (February)
Column F reflects the difference between Columns D & E.
and so on.

I would like to average the rows stats reflected in Column A, D, G, J, and so on.

Also, I would like to average the rows stats reflected in Column B, E, H, K, and so on.

Also, I would like to average the rows stats reflected in Column C, F, I, L, and so on.

View 9 Replies View Related

Formula AVERAGE The Sheet

Feb 21, 2010

There are (i think) 5 t-ball coaches
25 5 yrs old
44 6 yrs old
each were score on RUN, THROW, GROUND BALL, FLY BALL, BATTING,
scores were: 5-Excellent, 4-Very Good, 3-Good, 2-Average, 1-Fair

So I was thinking of making 5 sheets (one for each coach, with their scoring for each players)

The last sheet will be what the Average would be for each area from each coach, giving me a general idea about the players that I didn't get to watch and score.

So how would I formula the Avarage sheet?

Again I'm on short notice, and need to have this done on Sunday, when the information starts to come in and I can data-entry the scores, and have it ready for Monday nights draft.

View 9 Replies View Related

Database Formula For Average Of Top 20%

Oct 11, 2006

I have a database of information for which I need to be able to calculate the average of the top 20% for each column for all those rows that meet a certain criteria. In other words, I need a formula that's equivalent to the DAVERAGE function but I only want it to work on the top 20% of records that meet the criteria range that I've specified (as opposed to DAVERAGE which works on 100% of records that meet the criteria range). The database continues to grow so I'm unable to predetermine what quantity makes up this top 20%. I've attached a small sample file to show you what I'm talking about.

View 5 Replies View Related

Array/average Formula

Jan 23, 2007

Trying to average multiple cells that are not consecutive and contain zeros that i want to disregard. I have tried to do an array formula but the cells must be consecutive so I am at a loss. This is what i tried. =AVERAGE(IF(A2,A8,A12<>0,A2,A8,A12,))

View 9 Replies View Related

Average Formula For Multiple Locations?

Mar 30, 2014

HTML Code: 

=100*($I2/AVERAGE(IF($B2=$B$2:$B$38129,$I$2:$I$38129)))

I have the above array formula which I wanted it to calculate the average of all products selling in each store, but it seems to be calculated each?

In column b I have the store number, column I is the sales, I want to average all the sales in column I for each store.

I have probably over complicated?

View 3 Replies View Related

Reversed Weighted Average Formula?

Jun 6, 2014

What I am trying to do is rank my employees based on certain metrics. They are weighted in three different catagories. Talk time is 40%, Quality 50%, Attendance is 10%. I can weight the Talk Time and Quality, as those are basically the higher the score the better the weight. Attendance is the opposite, the lower the number, the higher the weight. Meaning, if employee has 1 absence that would better than someone who is at 4 absences. Is there a way to do this. I am somewhat educated on VBA, I understand if,then,else statements and/or Select/Case statements, so if I needed to do it in VBA I can. I just need direction to get it going.

View 3 Replies View Related

Average Formula For Rolling Range?

Jan 24, 2014

I am trying to create a formula that looks for the last populated cell, counts 12 cells back and returns an average for all of the cells in that range. I know I have done this before with some combination of INDEX and COUNT, but I can't seem to remember how I did it and my experimenting is not proving fruitful.

Attached is a simplified version of the layout I am working with

View 1 Replies View Related

Formula For Monthly Average With Different Ranges?

Feb 5, 2014

I'm trying to figure out a formula that will give me monthly average (per person) on the following report. The problem is that people start at different times and sometimes they don't produce in a given month after they have started. Basically I'm trying to get a monthly average from starting month to the last full month, in this case January.

View 8 Replies View Related

Average Formula For A Specific Condition

Jul 30, 2009

I have been asked at work to get some averages of data from an excel sheet. I have attached a sample workbook of the data i will be using. On Sheet1 is the data that will be looked at and on sheet2 is a sample of the results i need to achieve. I can get the data on sheet2 easy if i knew that data was static but in my case the data is going to be dynamic, so i don't know how many records each person is going to have each time if that person shows up in the record set at all. This rules out on static ranges to gather averages.

So far what i came up with is i use a macro to copy all the "Names" column to sheet 2 and then filter that data so that each name is unique, sort like a "key" for looking up values. Now i need to get averages of "Total Hours" worked in sheet 1 and display it in sheet 2 for each "Name". I have a formula worked out and almost have it where i want it but cant seem to get the range of data i need to be looking at. I need to get the Average Of hours Worked Per Person Where "Wk End Date" is greater than 1/1/2008 and the "name" matches up with the name in sheet 2.

View 3 Replies View Related

Formula To Count Multiple Ifs And Take An Average

Oct 15, 2009

Im having a problem finding a formula that will count and take an average of multipul ifs.

On sheet 1 of the attached file is multipul queries raised for us to answer.
On sheet 2 is an empty table which i would like help formulating.

In the Submission Lag Time Column i would like a forumla that looks down Column L on Sheet 1 and gives me an average for the amount of days a query has been with us from each company (column B) per month (going off the dates in column D).

I the same formula will be used for the other 3 columns, put looking down a different column on sheet 1.

View 11 Replies View Related

Average Formula On Daily Basis

Feb 5, 2010

How to go about fixing my spreadsheet so I am not having to manually update it each day..here is my forumla I am currently using...=(AVERAGE($D$2:$AH$2)-C5)*AI5...basically i need the cell below in D2 to change as every day a new day rolls off..for example the following day I need this formula to be =(AVERAGE($E$2:$AH$2)-C5)*AI5 ....so just that day changes.....do I need to use an If/then statement? if so how?

View 13 Replies View Related

Formula For Rolling 12 Month Average?

Mar 16, 2010

See Attached.

The YTD 10 column is fine that will change everytime you update each month. I was wondering if there was a formula I could use for the Rolling 12 month Column.

At the moment it is averging from Mar 09-Feb10 which is correct but when it comes to putting in data for Mar 10, the Rolling 12 month column will obviously not change.

Is there a way of moving the formula along one each time you input data into a new month. So when Mar 10 has been entered the rolling 12 month column will pick up Apr-09-Mar-10 then when Apr 10 has been entered the formula will change again to May-09-APr-10?

View 6 Replies View Related

Weighted Average Formula Population

Jul 13, 2007

See attached picture. This shows Profit and Growth for the stores in each region.

The percentage total is weighted based on the profit of each store in the region.

What I have is an excel sheet with hundreds of regions (going down), all with a different amount of stores. I need a way to populate each of its Region % Total with the weighted average formula (in my example, cells C8, C12, and C20) while also varying the formula to include only the stores in the region.

For example, C8 calculates the weighted average for %s in rows 2 through 7 (6 stores), but C12 calculates it for rows 9 through 11 (3 stores). I need the formula to vary based on the number of stores.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved