Here is my file after two rows of headers:
A3: any date
B3: any date
C3: =IF(A3>DATE(YEAR(TODAY()),1,1),A3,"") ... I need excel to return the date here only if it is within this year
D3: =IF(B3>DATE(YEAR(TODAY()),1,1),B3,"") ... same as above
E3: =IF(COUNT(C3:D3)
I've got a workbook where sheet "Raw Data" is used to enter audit findings. Subsequent sheet "Analysis" contains formulas to extract quantities and nature of audit findings so that they can be shown on quarterly reports.
When I set up the workbook the formulas on the "Analysis" sheet worked fine. The department has filled the columns with data and now all the formulas are returning #Value! There's something fishy going on here.....
=SUMPRODUCT(--('Raw Data'!$H$7:$H$1000=A4),--('Raw Data'!$K$7:$K$1000=C$1))
I am using a vlookup formula. In searching my sheet that uses this formula and it does not find a value that is in formula cell, why? Is there a setting that can be changed?
View 9 Replies View RelatedI have the following IF formula. It is working fine except the underlined part; it does not returned the value 15 ...
View 4 Replies View RelatedI am using the command =vlookup(a1,Sheet1!a1:z50,2) but if the cell is blank it return 0 how do i change the formula so it return the text "none" instead of 0?
View 3 Replies View RelatedI want to perform a calculation that is based upon user selection from a drop down list. In a simple for instance it would be something like:
Cell A1 has a drop down list containing 'Apples' & 'Oranges'
Cell A2 asks for quantity
Cell A3 needs to have a formula that calculates the price based on the user selection from A1 with each option having different prices (prices set and do not require manual input)
Would an 'If' statement cover this and, if so, what would it be?
I have a tracking template with a column listing dates, all i want to do is find all the missing dates from that column of dates.
Example:
Column A
1-May
2-May
4-May
5-May
7-May
8-May
10-May
11-May
12-May
14-May
15-May
I want to list the missing dates from this list.
I have attached an excel sheet for your reference. I have particular debit values that are to be added between the dates. And Dates are also derived by formula based of payment term.
The ones I need to modify is Highlighted in Yellow. The values to be added is in "Customer Statement" and in H Column
These dates also have formula by which there are derived
-------------------------Current Ageing-------------------------
Date Range
Bucket
Amount
Percent
Start Date
End Date[code].....
I am USing =SUMIFS('Customer Statement'!$A:$A,'Customer Statement'!$H:$H,"=" & E11) but does not work.
I want to numerically graph in a 2D stacked column graph the following:
Training Completed on "Time"
Training Completed but "Not on Time"
Training Not Completed
The training Due date was 10/30/2013.
Book1.xlsx
Is it possible to have a formula that will return the answer as the value.
For example if I have 15.75 in A1 and I use the formula =ROUND(A1,0), the solution is 16, but when you click on the cell it shows the formula and not the value.
I know about Paste Special, but was wondering if anything could be added to the formula to provide the solution.
Would this require a macro?
I'm trying to add a hyperlink to the final outcome of: =SUBSTITUTE(Info!$G$28,"village=99999","village=" & Z8). I need to add the hyperlink to the value returned in the cell. The value ends up being something like:
http://en28.tribalwars.net/game.php?...5&screen=place but it isn't a hyperlink.
The hyperlink can either be like this:
http://en28.tribalwars.net/game.php?...5&screen=place or like this
I have a user form where a user chooses a file. The form works fine, but if the user clicks the (x) in the top right of the box I get an error. how to either remove the (x) or what value is returned when the (x) is clicked so that I can put some handeling for it in my script.
View 5 Replies View RelatedThis formula works great but in my example if A1 cell is blank how can i get it to return a blank instead of a 0?
=SUMPRODUCT((RANKING SALES[Master.xlsx]Tyre!$A$2:$A$156
=A1)*(RANKING SALES[Master.xlsx]Tyre!$B$1:$N$1
=$I$4)*'RANKING SALES[Master.xlsx]Tyre!$B$2:$N$156)
I have a sheet where I put a code from a product in Column B, and the name of the product will appear in Column C, with a VLOOKUP Formula. What I would like to do is, get a VBA code to display a msg box, if somebody enter a the wrong code. If that happen a #N/D will appear in Column C.
In this Sheet I already have the bellow VBA Code, to avoid repeated product codes:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim Rng As Range, Dn As Range
If Target.Count 1 Then Exit Sub
Set Rng = Range(Range("B1"), Range("A" & Rows.Count).End(xlUp))
If Application.CountIf(Rng, Target) > 1 Then
MsgBox "O valor introduzido " & "(" & Target & ")" & " é duplicado. O Menino está a Dormir???"
End If
End Sub
I am trying to write a macro that will search in column ONE, then autofilter in column TWO.
So for example....
aaa | abab
bbb | abab
ccc | sdsd
aaa | abab
bbb | sdsd
I then search for "aaa"
then...(it autofilters by what is associated with column TWO, regardless of what was in column ONE)
aaa | abab
bbb | abab
aaa | abab
I was thinking...using Vlookup in column ONE, then Autofilter with column TWO.
My code right now is...but clearly it doesnt work.
Sub CommandButton1_Click()
Sheets("Sheet1").Activate
Dim Var As String
Var = Application.VLookup(TextBox1, Range("A2:AI772"), 34, False)
Selection.AutoFilter Field:=34, Criteria1:="*" & Var & "*"
End Sub
I have a 2 column array of numbers. Column A has duplicate values, column B has unique values.
I have a lookup which is counting the number of occurences of any given value in column A, but now need to populate a cell with a concatenated string of the values from column B that correspond with all instances of each unique value in column A.
I have IDs in the first column of an excel chart. After that I have three more columns, being date of test, type of test (start, 3 months, 6 months, 9 months, finish), and lastly the result for the test.
Right now, the same IDs are listed multiple times for different results, so for example:
ID | Date | Type | Result
27 | 3/27 | Start |8.3
27 | 6/27 |3 Mon |7.9
27 | 9/27 |6 Mon |7.4
27 | 12/3 |9 Mon |7.2
27 | 3/27 | FINISH |6.5
What I need is the following layout:
ID | Start | Date | 3 Months | Date | 6 Months | Date | 9 Months | Date | Finish | Date
ID is only shown at left, and the values for the test result and corresponding dates are shown in their respective columns.
I tried to do an IF function with a LOOKUP inside, and it worked originally, but when I add more values for the same ID to the original column, it only shows the latest date, and only gives that result.
I have a table where the rows are conditions and the columns are experiment numbers, as an example below:
Experiment 1
Experiment 2
Experiment 3
Hardness
X
X
Solubility
X
X
Density
X
X
The table is fairly large. What I would like to be able to do is use a lookup/formula that will return all the experiment numbers a given condition is tested in. In other words, for a given condition (i.e., Hardness), which columns have an "X". Not sure if that can be done with a lookup or not or if there is another function necessary. I would like to be able to do it without macros though and also have it automatically update if I move the "X" around to different experiments.
Every week I have a set of open tickets with various dates. I need to break these Dates down to certain ranges.
Current DateAged Date Range Value to assign
10/20/2013 10/18/13< = 3 days A1
10/20/2013 10/7/13> 3 days & < 2 weeksA2
10/20/2013 9/23/132 weeks - 4 weeksA3
10/20/2013 9/22/13> 4weeks A4
I need in cell H:2 a value returned of with A1 thru A4 based on the results of the information in Columns A:D.
So basically it shoudl have in column H a bunch that fall in the reange of 3 day or less with "A1" then the dates that fall in the range of greater then 3 days but less then 2 weeks a value of "A2", etc. I hope i made this clear enuf to understand.
I am trying to concatenate the values of many cells, not the formulas in the cells, to avoid having to repetatively paste special, value. Perhaps something like this: =CONCATENATE(VALUE(AA2):VALUE(AQ2))
View 3 Replies View RelatedI have two columns with multiple sets of data, based on the entered value I
need the corresponding header returned.
For example:
Column A Column B
Apples Green
Red
Granny Smith
Mutsu
Red Delicious
Oranges Naval
Manderin
Clementine
Tangerine
Now based on a response in another sheet I need to return either "Apple" or
"Orange".
=INDEX('Fruit'!A1:A65535,MATCH(K50,'Fruit'!B:B65535,0)) will work if I copy
Apple next to each apple type, but for other items the list of options can
grow dramatically.
I need a formula that finds a value or range of values in a list and if the value meets the criteria automaticaly delete that row. For example I want to search B3:B7 for a 0 value if I find a cell in that range with a 0 value i want the formula to delete the entire row.
View 4 Replies View RelatedAged Debts & Comments
Comments consists of the following
Customer number, Date, Comment, Date, Comment, Date, Comment, Etc Etc....
Aged Debts is
Customer number, Current Outstanding, 30,60,90,120.. Comments.
I would like to bring back the last comment which would be the furthest right comment in "comments".
Ex. of COMMENTS
A B C D E F G
0001 17/10/08 Called Cust. 20/10/08 Payment Promised
0002 15/10/08 No Answer 17/10/08 No Answer 20/10/08 letter Sent
0005 15/10/08 Payment Promised
Ex of Aged Debt..........
I want a msgbox to popup if the autofilter returns no records saying "No records found".
Heres a sample of the
Sub cmbFindAll_Click()
Dim strFind As String 'what to find
Dim rfilter As Range 'range to search
Set rfilter = Sheet1.Range("a2", Range("f65536").End(xlUp))
Set rng = Sheet1.Range("a2", Range("a65536").End(xlUp))
strFind = Me.TextBox1.Value
With Sheet1
If Not .AutoFilterMode Then .Range("A2").AutoFilter
rfilter.AutoFilter Field:=1, Criteria1:=strFind & "*"..........
We have a product plan, which we are trying to automate. To break it down we have a product number which will consist of several other components parts. In the product plan we are tying to automate showing which components are in constraint to the side of the complete part number. We've tried using VLOOKUP but it only ever returns the first value it finds, whereas we need to show all constrained parts. Have tried to break it down into ranges as per attached, but this is unreliable as the data is drawn from another source, and corrupts the ranges if re-imported or sorted.
View 4 Replies View RelatedI want to apply formatting to only the cells returned by MSQUERY.
I do not want to apply formatting to all 65535 rows on the basis they MIGHT be used by the returned data, I only want to use those that ARE.
Given this formula =(H2+( SUM(K53:DB53))) which simply takes an existing value and adds to it the sum of a series of values. I am happy if the value returned is any number less than 28. However if the value returned from the above formula is >28 I want the number returned to be shown as 28.
View 2 Replies View Relatedi need a formula for which calculate all cell (calculating years months and days formula). FIND ATTACHED .xls file i need a answer in cell highlited in yellow color.
View 3 Replies View RelatedI am trying to have a value returned in cell C3 if two conditions are met. In Cell C3 (Sheet 1), if the value in Cell A3 (Sheet 1) is listed in column A on sheet 2, and the 12031 is listed in column B on sheet 2, I need the value of Open to be returned.
View 3 Replies View RelatedHow do I put in iserror in to this to make the cell go blank with N/A is returned. Only ever done this on vlookups. =IF(I15<E8,"TOOLING REQUIRES CALIBRATION","")
View 2 Replies View Related
