# Nested IF AND OR Formula Its Does Not Returned The Value 15

Nov 1, 2006I have the following IF formula. It is working fine except the underlined part; it does not returned the value 15 ...

View 4 RepliesI have the following IF formula. It is working fine except the underlined part; it does not returned the value 15 ...

View 4 RepliesADVERTISEMENT

I've got a workbook where sheet "Raw Data" is used to enter audit findings. Subsequent sheet "Analysis" contains formulas to extract quantities and nature of audit findings so that they can be shown on quarterly reports.

When I set up the workbook the formulas on the "Analysis" sheet worked fine. The department has filled the columns with data and now all the formulas are returning #Value! There's something fishy going on here.....

=SUMPRODUCT(--('Raw Data'!$H$7:$H$1000=A4),--('Raw Data'!$K$7:$K$1000=C$1))

Here is my file after two rows of headers:

A3: any date

B3: any date

C3: =IF(A3>DATE(YEAR(TODAY()),1,1),A3,"") ... I need excel to return the date here only if it is within this year

D3: =IF(B3>DATE(YEAR(TODAY()),1,1),B3,"") ... same as above

E3: =IF(COUNT(C3:D3)

I am using a vlookup formula. In searching my sheet that uses this formula and it does not find a value that is in formula cell, why? Is there a setting that can be changed?

View 9 Replies View RelatedI am using the command =vlookup(a1,Sheet1!a1:z50,2) but if the cell is blank it return 0 how do i change the formula so it return the text "none" instead of 0?

View 3 Replies View RelatedI want to perform a calculation that is based upon user selection from a drop down list. In a simple for instance it would be something like:

Cell A1 has a drop down list containing 'Apples' & 'Oranges'

Cell A2 asks for quantity

Cell A3 needs to have a formula that calculates the price based on the user selection from A1 with each option having different prices (prices set and do not require manual input)

Would an 'If' statement cover this and, if so, what would it be?

I am trying to use a combination of Concatenate and IF formula to produce an email.

My input.

D4: First Name:

D5: Middle Name:

D6: Last Name:

D8: Organization:

Once all these are filled, I want the formula to produce a result like

FirstName.M.LastName@Organization.com

I have used the following formula.

[Code] .....

Problem is if there is a middle name the formula works fine, but in case where there is no middle name, it produces the following result.

FirstName..LastName@Organization.com

How do I remove the additional (.) in cases where there is no middle name.

Attached File : Email Generator.xlsxâ€Ž

I have a rather large formula that I put together and it's shown in column 'C' in the small sample file I have attached. I'd like to add one more criteria such that I avoid duplicate solutions in column 'C'. i.e. I only want the first occurrence of a group.

The formula works fine 'bucketing' the first entry. If I have an solution in C I want the formula to not give me another answer if the cell immediately above has an answer. In other words, rows 11 and 15 would be blank because rows 10 and 14 have an answer.

I've tried inserting another criteria in the AND statement, like ISBLANK for the cell above, but I can't get it to work. What am I doing wrong, OR is there a simpler solution?

=IF(C2="Windows",B2,IF((AND(A2=A3,C3="Windows")),B3,IF((AND(A3=A4,C4="Windows")),B4,IF((AND(A4=A5,C5="Windows")),B5,IF((AND(A5=A6,C6="Windows")),B6,IF((AND(A6=A7,C7="Windows")),B7,IF((AND(A7=A8,C8="Windows")),B8,"None")))))))Here is a link to the spreadsheet (D2 being the formula cell):

http://img199.imageshack.us/img199/8500/29072008.jpg

Basically, I am trying to put the columns data (if it has a porch, conservatory, windows) into one row for the contract number, as the dump which I have, is giving me seperate row's instead of one.

I am trying to get the formula to check if the contract number matches on the following row, and if it does, to check if the Product Description matches the header of that row (if it's a window, conservatory) if so, copy the quantity cell into D1, however, it's copying it even if the contract numbers do not match and I do not know where I am going wrong!!

Objective: To find out which customers order certain items and which customers dont order certain items. Many customers may order the same item eg customer A, B, C, D all order item "4567"

I have 2 worksheets.

Worksheet 1: Showing 30 item codes, item description and customers. Items in col A (A2:A31), description in col B (B2:B31) runnning down vertically. Customer name in cell 1 of all other columns running across horizontally, eg C1, D1, E1.... (C1:GF1). There are 186 customers. (A formula needs to start at C3 and dragged to GF3)

Worksheet 2: Raw data showing customers in column A and items in column B, There are 3,753 rows. Customer in column A are duplicated as the same customer may order a number of items so for eg

ABC PTY LTD 5671

ABC PTY LTD 5683

ABC PTY LTD 5692

ABC PTY LTD 5610

ABC PTY LTD 5611

Tried the below formula

=if(C1='S2'!A2),=if('S1'!A2='S2'!B2),"ordered","")

I have a spreadsheet which contains dates (amongst other info) of when a specific form was completed for a client. We have 'date windows' which these should fall into. I'm really struggling with how to work this one out and whether to use nested IF's or try some kind of code (although my vb knowledge kind of stops after recording a macro). Bascially I need to know for each 'date window' if the window has been met or missed. There may be up to 30 different dates per person (in my example sheet I have up to 9).

View 2 Replies View RelatedHe works at state tax administration. He had this formula at work to calculate income tax.

View 3 Replies View RelatedI currently use 3 different formulas to return a value I want. The first one is =LEN to return a value. I then want to decuct 1 from this length value so I just use =A2-1 in the next cell. I then use =right so my returned result is always the X right most characters -1. Is there a way I can nest all these formulas so I'm getting the desired result in just one cell?

View 3 Replies View Relatedwhere the issue with the following formula is?

=IF(AND($E$2="N",$AA$550),"BT1",IF(AND(Z5="F",Y5>=0),"CLEAR",IF($AA$5

I have to write a formula which states the following:

if cells AA1,AB1 &AC1 = 0 then "Slow-Moving",

if of these cells AA1,AB1 &AC1 contains a number then "OK",

if cells, AA1,AB1,AC1,Z1,X1,Y1 all = 0 then "Non-Moving"

I believe an If and AND combination could work but its not working for me.

I have searched the threads high and low, but no one seems to have come across this issue: My formula works fine untill it comes across a blank in Comparison!E16: =IF(AND(Comparison!E14=Comparison!E15,Comparison!E15=Comparison!E16),"",IF(AND(Comparison!E14=Comparison!E15,Comparison!E16=""),"") IF(AND(Comparison!E14<>Comparison!E15),Comparison!E14))

I am comparing cells from a previous sheet onto Comparison so that I can see where the discrepancies lie.

I want to:

return nothing if all the cells match;

return nothing if the first two match, but the third is blank;

return the value if the first cell isn't matching

keeping in mind that this is only for the top cell: Comparison!14 - I will then have to bring it down to 15 and 16

If the value in the Discount Y/N column is equal to Y, the formula should check if the value in the Tenure (Yrs) column is less than 5.

View 3 Replies View RelatedBut I've read that the new versions of excel allow for up to 64 nested if functions. I need to nest about 5 if functions, but after I write out the 3rd excel says there are too many arguments.

=IF(INDEX(vlookup!$D$2:$D$157,MATCH($F16,vlookup!$B$2:$B$157,0))="CPM", INDEX(vlookup!$E$2:$E$157,MATCH($F16,vlookup!$B$2:$B$157,0))*(J16/1000), IF(INDEX(vlookup!$D$2:$D$157,MATCH($F16,vlookup!$B$2:$B$157,0))="CPA", INDEX(vlookup!$E$2:$E$157,MATCH($F16,vlookup!$B$2:$B$157,0))*(L16), IF(INDEX(vlookup!$D$2:$D$157,MATCH($F16,vlookup!$B$2:$B$157,0))="dCPM", 0.04*(j3/1000))), IF(INDEX(vlookup!$D$2:$D$157,MATCH($F16,vlookup!$B$2:$B$157,0))="dCPC", 0.008*k3, "calc")

Trying to make it even more complicated....probably again misplaced my parenthesis

=IF((AND('Input Page'!B43="-",OR('Input Page'!B13="New Lease In-House",'Input Page'!B13="New Lease w/Co-Broker")),'Analysis Report'!D57*'Input Page'!B32/”2”,'Analysis Report'!D57*'Input Page'!B32/"4",IF(AND('Input Page'!B43="-",OR('Input Page'!B13="Renewal In-House",'Input Page'!B13="Renewal w/Co-Broker",’Input Page’!B13=”Expansion In-House”,Input Page’!B13=”Expansion w/Co-Broker),'Analysis Report'!D57*'Input Page'!B32,'Analysis Report'!D57*'Input Page'!B32/"2"))

I am trying to do a nested if formula but I can't get it to work.

The condition is: If value in cell R5 >0 then get the value in cel X29 on power 4.

=IF(R5>0,POWER(X29,4)

following

i tried formula =IF(F$1

I amtrying to find a way to nest a formula in the Match function.

How can i make the following formula more dynamic so that I do not specify the colum "AY"?

=MATCH(11,Data!$AY:$AY,0)

The information is contained in column AY labeled "New-Rate" in the data sheet

I know there is a maximum of 7 nested IF statements available but I cannot get the following formula to work, even though it only has 7 IF's

=SUM(IF(Department=J$88,IF(Progress_StatusCNP,IF(Progress_StatusCSO,IF(Progress_StatusNS,IF(Current_Phase=$B91,IF(MID(Progress_Status,1,7)="On Hold",IF(MID(Group_Procurement_Involved?,1,3)="Yes",In_Year_Opportunity__2007,0),0))))/1000)))

CNP, CSO and NS are named cells, all named ranges are the same size and the formula is entered with Ctrl & Shift to make an array formula.

I am trying to write a formula in 2003. The basic premise is below and I'm having problems getting all the senarios to work out.

Cells:

E20 = Calc'ed amount

E22 = Min amount (Sometimes equals zero - No Min)

E23 = Max amount (Sometimes equals zero - No Max)

E24 = Additional amount to add

=IF(AND(E22=0,E23=0),SUM(E20,E24),IF(AND(E220,E230),IF(AND(E20>E22,E20E23,SUM(E23,E24),IF(AND(E20E22),SUM(E20,E24),IF(AND(E20

Current Formula

{=IF(AND(G144>0,F144:F173

One of my macros is a tied to a worksheet_change. The macro runs and gives me the result that i want, however excel flips to the sheet that the sub is running for.

example:

Sheet1, Change the cell

excel flips the visible to sheet2

macro runs

Its kinda of annoying. I would like excel to stay on sheet1 where i am trying to finish data entry. I suspect it is how i have writen the macro. Any help at all on how to clean it up.. or a better way to write the same thing would be very appreciated.

Sub TermPlacement()

' Term_Placement Macro

' Uses the Value of Term to insert a formula repeatedly in a colum.

Dim sNFormula As String

Dim rTerm As Range

Dim rStart_Cell As Range

Dim rNpayment As Range

'The reference cell located directly above the first cell in column

Set rStart_Cell = Worksheets("Floor Plan").Range("$B$13")

'Additional set values....................

I have the following code that I am trying to distribute over an array. The best case scenario is that the code enters the text of the formula instead of the calculated value. When I tried to tweak a few things I couldn't even get the text to show up. This seems to only happen on the formulas which include If_Then statements. Other straight forward formulas such as "sum" etc... seem to go into place and calculate.

Sheets(1). Range("b3:s3").FormulaArrayR1C1 = _

"=IF(AND(MAX(2!R[2]C:R[6]C)>0,SUM(3!R[1]C:R[5]C)<0),MAX(2!R[2]C:R[6]C),"")"

I have a student grade worksheet with this formula and it returns # DIV/0 which I need to solve the problem. I have tried many different ways and none seem to work. Con someone assist with this problem. Here is the formula:

= SUM(R13,R55,R97,R139,R181)/(COUNTIF(R13,">0")+(COUNTIF(R55,">0")+(COUNTIF(R97,">0")+(COUNTIF(R139,">0")+(COUNTIF(R181,">0"))))))

I am creating a worksheet and I have a formlua where the value is text. I can make it work standing alone but not with other variables. =IF(E11=S1,0)+(IF(E12=S1,0)+(IF(E13=S1,0.0025))+IF(E14=S1,"Call for Prciing"))

View 2 Replies View RelatedI have two lists ("fulllist" & "code" - A1:A20 is a data validated dropdown list of "fulllist". I want B2:B20 to return a list item offset one column to the item selected in A1:20

So, if A:1 drop down equals "asphalt paving" I want B:2 to insert a code from a list on cell right of asphalt paving.

Something like =IF(B31<>"fulllist",=OFFSET("fulllist",0,1,,),"") This returns an error. I have a feeling I need to use match. I can't seem to find an answer to this and I bet it is fairly simple.

Copyrights 2005-15 www.BigResource.com, All rights reserved