Is it possible to have a formula that will return the answer as the value.
For example if I have 15.75 in A1 and I use the formula =ROUND(A1,0), the solution is 16, but when you click on the cell it shows the formula and not the value.
I know about Paste Special, but was wondering if anything could be added to the formula to provide the solution.
Would this require a macro?
I have a formula (AL15) to determine the address of the last column with a value greater than 1. =COUNTIF(C16:AC16,">=1")+2. I then use this column value to aquire the Absolute row "15" and the determined column=(ADDRESS(15,AL15,4)). This returns to me a Column value and row value that I need to use as a refference. How can I convert this returned value to a reference.
View 2 Replies View Relatedmy questions below are more oriented to hows & whys, as opposed to asking for a fast solution to a pressing problem.
I'm just reviewing the basics of SumProduct to be sure that I understand what I'm really doing when I deploy the function. So, I have the following formula:
I'm looking for a VBA solution that will return a list of unqiue job numbers in B by date, the below is some sample data in Sheet 1
Sheet 2 is the result I'm looking for and usually there will be muliple job mumbers for the same date and in this case I'm fine to leave it as a blank cell in sheet 2 for that day.
Unable to use advanved filtering as it's a data table thats changing all the time. It's verly likely that the same job numbers will be in multiple days....
I'm looking for a VBA solution that will look at the machine name above in blue and insert in in column E
Machine 2's expected results have been filled in....
I have an excel sheet which has been exported from an 'Employee Attendance Software',
http://www.flickr.com/photos/34247990@N06/4299288997/
In the above screenshot, The employee name highlighted in Yellow should feauture in column A in the cells highlighted in Yellow.
Similarly, there are some other employees in the list for whom I have to populate the data in a similar fashion
http://www.flickr.com/photos/34247990@N06/4299288959/
I am trying to solve a problem with = LOOKUP. Here's the data. A1 can have a value between 1-100.
IF A1 IS <80.00, NO MULTIPLICATION IS NEEDED
IF AI IS 80.01 TO 85.00, MULTIPLY A2 BY 0.37%
IF AI IS 85.01 TO 90.00, MULTIPLY A2 BY 0.52%
IF AI IS 95.01 TO 95.00, MULTIPLY A2 BY 0.87%
IF AI IS 95.01 TO 100.00, MULTIPLY A2 BY 1.07%
Is there a =LOOKUP formula that can be used here?
I have the new version of excel and I can't figure the correct formula to do the following.
Attached is my example.
A1 is available Inventory qty. C1:H1 are forcast qty's. I would like to have the available forcast qty. shown in black and the unavailable forcast qty. shown in red based on available inventory shown in A1
Example
So C1,D1 and E1 would be Black and F1 and G1 would be red. As inventory changes so would the colored numbers on the forcast.
I am using HLOOKUP to show a date depending on the month shown in B10.
If B10 is January then the dates throughout January ie. 01/01/08 to 31/01/08 are shown in the cell range of F13 to F43. There is no problem with this unless there are 30 or 29 days etc in a month. So if November is in B10, in F43 I have the value of 00/01/1900. Can I modify my formula so if there is no data in the lookup table to return a blank value ie. "".
Here is my formula:
=HLOOKUP($B$10,DATES!$B$1:$M$32,2,FALSE)
I obviously change the 2 to 3, 3 to 4 as I copy the formula down the table.
I would like to have the answer to a formula, say in cell G6, to show up in say G5. I notice in my college coarses, doing our homework through excel, the solutions are always in a cell around the entry cell.
View 9 Replies View RelatedI am currently using a macro which highlights keywords and associated page views from an array in my website stats spreadsheet. Now I need to take it to the next level:
I want to use a multi-dimensional array to pull out any keywords that are duplicated, and display them at the top of my spreadsheet with the totaled page views next to them in a different color (red).
Here is my existing Keyword highlighting
Sub Highlight_Keywords()
Dim vntWords As Variant
Dim lngIndex As Long
Dim rngFind As Range
Dim strFirstAddress As String
Dim lngPos As Long
My problem is that long text for the cell overlaps any blank cells to the right. I have more then 20.000 rows, so I would not like to put a space character in all the blank cells. Is there a way of formatting which will stop this? I don't want these texts to overlap the blank cells!
View 3 Replies View RelatedI have the attached table. I need to format with conditional formatting with the following criteria:
1) If >= 80% , then flag as green
2) If >=1% but <80%, then flag as yellow
3) If 0%, then flag as red.
I did the formatting in conditional formatting but the it did not results in the desired solution.
use of SUMPRODUCT and what I believe is called a double unary operator (--). Here's the original post with Paul's solution:
http://www.excelforum.com/excel-gene...-new-post.html
I've since discovered that a previously unknown column of data (I'm transcribing data from paper documents) needs to be included in the calculations. Specifically, the new column of data (shown in yellow in the attached example) has to be taken into consideration when counting product quantities. An explanatory pseudo code statement, also appearing in yellow in the example sheet, describes.
I need to determine federal tax withholding from gross pay.
If gross amount (for S-0 = single no dependents) is
Over.................But NOT Over............Then Subtract.........And multiply
$0.00...............$195.00.....................$5 1.......................10%
$195.00............$645.00.....................$99 .......................15%
$645.00............$1,482.00..................$351 ......................20%
$1,482.00..........$3,131.00..................$447 ......................25%
$3,131.00..........$6,763.00..................$849 .....................30%
If gross is $400 then what are the total taxes taken out? Could someone please provide a formula?
I tried this one: =IF(M10
I have two columns of adjacent data Call them A & B (although this could differ)
If the data in the second colum is not equal to, blank cell or contains the words "CAT", "DOG" or "ELEPHANT" then the content of the cell in the second column should REPLACE the content of the adjacent cell in column A (in this example) leaving B blank, otherwise column B remains unchanged.
Is there a way to test out a formula using Excel that has more than 2 variables? (If only 2 variables, I would use a simple data table). The formula I am testing has 50X50X20 variables (and as a subset, each variable has 2500 lines of assumptions!). I don't need to see all the results, only the result that produces the highest result. For simplicity (if someone has an answer) let's assume 3 variables are A1, A2 and A3. Formula is in A4 and formula is A1+A2+A3. Assuming A1 can be 1 to 5 and A2 same , A3 same, the long hand calc is for me to run a data table using variables in A1 and A2 the fixing A3 (as 1)..note maximum result....then run data table again using variables in A1 and A2 and changing fixed value in A3 to the number 2...and so on and so on....in this simple example I know the max result would be 15, but much more difficult in my spreadsheet test.
I've got a workbook in which there're many formulas linking to other workbooks. Coz these other workbooks are frequently updated, so the calculation (update) in my workbook is painfully slow and time consuming. I wanna improve this, maybe by VBA or other way instead of using link like this. Anyone can give me some hints or way how to improve this condition???
View 7 Replies View RelatedI've got a workbook where sheet "Raw Data" is used to enter audit findings. Subsequent sheet "Analysis" contains formulas to extract quantities and nature of audit findings so that they can be shown on quarterly reports.
When I set up the workbook the formulas on the "Analysis" sheet worked fine. The department has filled the columns with data and now all the formulas are returning #Value! There's something fishy going on here.....
=SUMPRODUCT(--('Raw Data'!$H$7:$H$1000=A4),--('Raw Data'!$K$7:$K$1000=C$1))
I'm trying to add a hyperlink to the final outcome of: =SUBSTITUTE(Info!$G$28,"village=99999","village=" & Z8). I need to add the hyperlink to the value returned in the cell. The value ends up being something like:
http://en28.tribalwars.net/game.php?...5&screen=place but it isn't a hyperlink.
The hyperlink can either be like this:
http://en28.tribalwars.net/game.php?...5&screen=place or like this
I have a user form where a user chooses a file. The form works fine, but if the user clicks the (x) in the top right of the box I get an error. how to either remove the (x) or what value is returned when the (x) is clicked so that I can put some handeling for it in my script.
View 5 Replies View RelatedHere is my file after two rows of headers:
A3: any date
B3: any date
C3: =IF(A3>DATE(YEAR(TODAY()),1,1),A3,"") ... I need excel to return the date here only if it is within this year
D3: =IF(B3>DATE(YEAR(TODAY()),1,1),B3,"") ... same as above
E3: =IF(COUNT(C3:D3)
This formula works great but in my example if A1 cell is blank how can i get it to return a blank instead of a 0?
=SUMPRODUCT((RANKING SALES[Master.xlsx]Tyre!$A$2:$A$156
=A1)*(RANKING SALES[Master.xlsx]Tyre!$B$1:$N$1
=$I$4)*'RANKING SALES[Master.xlsx]Tyre!$B$2:$N$156)
I am using a vlookup formula. In searching my sheet that uses this formula and it does not find a value that is in formula cell, why? Is there a setting that can be changed?
View 9 Replies View RelatedI have a sheet where I put a code from a product in Column B, and the name of the product will appear in Column C, with a VLOOKUP Formula. What I would like to do is, get a VBA code to display a msg box, if somebody enter a the wrong code. If that happen a #N/D will appear in Column C.
In this Sheet I already have the bellow VBA Code, to avoid repeated product codes:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim Rng As Range, Dn As Range
If Target.Count 1 Then Exit Sub
Set Rng = Range(Range("B1"), Range("A" & Rows.Count).End(xlUp))
If Application.CountIf(Rng, Target) > 1 Then
MsgBox "O valor introduzido " & "(" & Target & ")" & " é duplicado. O Menino está a Dormir???"
End If
End Sub
I am trying to write a macro that will search in column ONE, then autofilter in column TWO.
So for example....
aaa | abab
bbb | abab
ccc | sdsd
aaa | abab
bbb | sdsd
I then search for "aaa"
then...(it autofilters by what is associated with column TWO, regardless of what was in column ONE)
aaa | abab
bbb | abab
aaa | abab
I was thinking...using Vlookup in column ONE, then Autofilter with column TWO.
My code right now is...but clearly it doesnt work.
Sub CommandButton1_Click()
Sheets("Sheet1").Activate
Dim Var As String
Var = Application.VLookup(TextBox1, Range("A2:AI772"), 34, False)
Selection.AutoFilter Field:=34, Criteria1:="*" & Var & "*"
End Sub
I have the following IF formula. It is working fine except the underlined part; it does not returned the value 15 ...
View 4 Replies View RelatedI have a 2 column array of numbers. Column A has duplicate values, column B has unique values.
I have a lookup which is counting the number of occurences of any given value in column A, but now need to populate a cell with a concatenated string of the values from column B that correspond with all instances of each unique value in column A.
I have IDs in the first column of an excel chart. After that I have three more columns, being date of test, type of test (start, 3 months, 6 months, 9 months, finish), and lastly the result for the test.
Right now, the same IDs are listed multiple times for different results, so for example:
ID | Date | Type | Result
27 | 3/27 | Start |8.3
27 | 6/27 |3 Mon |7.9
27 | 9/27 |6 Mon |7.4
27 | 12/3 |9 Mon |7.2
27 | 3/27 | FINISH |6.5
What I need is the following layout:
ID | Start | Date | 3 Months | Date | 6 Months | Date | 9 Months | Date | Finish | Date
ID is only shown at left, and the values for the test result and corresponding dates are shown in their respective columns.
I tried to do an IF function with a LOOKUP inside, and it worked originally, but when I add more values for the same ID to the original column, it only shows the latest date, and only gives that result.
I have a table where the rows are conditions and the columns are experiment numbers, as an example below:
Experiment 1
Experiment 2
Experiment 3
Hardness
X
X
Solubility
X
X
Density
X
X
The table is fairly large. What I would like to be able to do is use a lookup/formula that will return all the experiment numbers a given condition is tested in. In other words, for a given condition (i.e., Hardness), which columns have an "X". Not sure if that can be done with a lookup or not or if there is another function necessary. I would like to be able to do it without macros though and also have it automatically update if I move the "X" around to different experiments.
