Formula To Transfer All Worksheets In Directory (only Single Worksheet) Into One Workbook

Jul 16, 2014

I am trying to quickly transfer all worksheets in a directory into one worksheet listing all worksheet names in the tabs in number order.

The formula have so far is below. But it does not name the individual tabs as the worksheet names in no order.

Sub GetSheets ()
Path = "Y:
Filename = Dir(Path & "*.xls")
Do While filename ""
Workbooks.Open Filename:=Path & Filename, ReadOnly:=True
Sheet.Copy After:=ThisWorkbook.Sheets (1)
Next Sheet
Workbooks (Filename) . Close
Filename = Dir ()
Loop
End Sub

The worksheets appear as follows 1982-001, 1982-003 up to 1982-250 ( I want them in single workbook but as multiple tabs in number order)

View 1 Replies


ADVERTISEMENT

Data Transfer From One Worksheet To Multiple Worksheets

Mar 25, 2007

I want to transfer the data of one worksheet (to be added everyday) to multiple sheets.

View 4 Replies View Related

VBA Code To Get Formula Into Each Worksheet Then Loop To Extract All Worksheets Into Master Workbook

Aug 26, 2012

I wanted to know if there is any way possible to get vba to insert a formula in a cell to each worksheet in each workbook in a folder and then using loop to extract all the info from each worksheet of each workbook in same folder into a master workbook?

View 1 Replies View Related

Transfer Value From Active Worksheet In One Workbook To Another Workbook?

May 9, 2014

I am trying to transfer a value from the active worksheet in one workbook to another workbook. I keep getting a subscript out of range error on the line that uses activeworksheet command when I run my code.

View 3 Replies View Related

Cannot Transfer Data From 1 Worksheet To Another In Same Workbook

Mar 27, 2014

I have the following "if" statement

=IF('Audit Blank'!H53=2,SUM('Audit Blank'!I12:M12),"")

but it is not doing what i want and think i need some vba coding which i am not up to speed with. Basically i have an excel workbook containing a number of worksheets and what i want to do is enter data on the 1st worksheet which then populates the summed data into a second worksheet into a specific column dependant on the week no. that appears in a cell on the 1st worksheet. eg. the week number will appear in cell H53 the details in the sum of H12:L12 would then appear in cell I4 under the column heading Week 1 in the second worksheet, the sum of H13:L13 would then appear in cell I5 and so on. Where my "if" statement falls down is when the week number changes to "2" all the data under the column heading week 1 disappears but i need it to remain and the data for week 2 to be placed under the column heading week 2 in the second worksheet.

View 1 Replies View Related

Transfer Data In 2 Identical Workbook With Multiple Worksheet?

Dec 23, 2013

I try to transfer a data from multiple worksheet in a same 2 identical workbook. One I keep for me and the other one will be update by the user. So I need the data update by the user can be transfer to my workbook and only the new data not the one that already in my workbook. I try with the code below but it seem not working. The code run but nothing being transfer.

[Code] ....

View 1 Replies View Related

Add-in To Saving Groups Of Worksheets As A Single Workbook

Oct 7, 2008

I have another little conumdrum I'm trying to work out.

I'm using one of Ron's scripts as an add-in which I've just amended the output path for.

http://www.rondebruin.nl/tips.htm

This script essentially creates a new workbook from each worksheet in the active workbook.

As I have a workbook of about 500 worksheets, I am trying to group the worksheets opposed to having to split all and rejoin them manually.

Luckily all of my worksheets names are initials with numbers after them (as assigned by excel when merged):

e.g., RH, RH (2), RH (3), RH (4), AG, AG (2), AG (3) and so on.

That said there are some random ones too, but I'm happy for them to be kicked out as individual files.

Anyway I'm pretty sure there is a way this can be added into this existing script by addressing Sheet.Name perhaps but I'm a bit unsure exactly..

Sorted in order (i.e. 2,3,4) would also be a bonus but not essential as they need to manually checked and I have a separate macro for sorting worksheets anyway.

View 12 Replies View Related

Consolidate All Data From All Worksheets Into A Single Worksheet?

Jan 27, 2014

how to consolidate all data from all worksheets into a single worksheet(master sheet)?

Untitled.png

In the attachment, data for worksheet 1 will be added to the masterlist and worksheet 2 will follow.

View 3 Replies View Related

Copy Columns From Multiple Worksheets To Single Worksheet

Apr 8, 2014

I have Folder with almost 21 or 22 Excel files depending on the working days in a month,

All I am trying to do is to run a Macro so that Column C and D from Sheet Name "Resource Count" from all Workbooks of Different Names from all the files from that folder to be copied and pasted to a new Workbook one after the other in new workbook.

To clarify, Each workbook in that folder will have a sheet named "Resource Count" and I want to copy Column C and Column D from all the workbooks from the folder and paste one after other in a new work book.

View 1 Replies View Related

Copy Data From Various Worksheets And Display Row By Row In Single Worksheet?

Feb 23, 2014

I data on a master document and have data sent in from various independent offices which I would like to reconcile. Each region along with the master is posted onto a separate worksheet in my spreadsheet but I would like to copy specific information in worksheet order and paste row by row onto single worksheet in order to run a comparison. The data needed is in the same order but the number of rows reported on each work sheet will differ day by day. If worksheet 1 displays 50 rows in the consolidated sheet I would like worksheet 2 start in row 51, if however worksheet 1 finished in 24, I would like worksheet 2 to start in 25. Now I also want each worksheet to start reporting once the previous worksheet is complete and when there is no data in a specific worksheet, I would like the process to be able to continue.. so sheet 1 reports, then sheet 2 but sheet 3 has no data so it jumps to sheet 4 to begin.

For example consider various cities, New York, London, Frankfurt & Tokyo, each has sales of various products from a catalogue range but the products sold differ each week based on regional trends. The master document which is independent also reports sales but this is manual so I would like to pick up any inaccuracies through reconciliation.

Outside of VBA and Macros, is it possible to get excel to report data sheet by sheet onto one in a continuous order?

View 3 Replies View Related

Apply Password Protection For Different Worksheets In Single Excel Workbook

Apr 2, 2012

I used VBA codes to apply different passwords for different worksheets in a single excel workbook. They worked fine. Then i applied a password to the VBA code itself through the VBA project properties. Also worked.

But my problem is that, if any one enters a wrong password to open any of the worksheets, the VBA will open an error message window and when "end" option is clicked, the VBA code will open without any prompt for the password.Thus the entire purpose is defeated.

View 9 Replies View Related

Copy Data From Multiple Worksheets And Append To Single Worksheet?

Oct 8, 2012

[URL] to append summary data within several workbooks. But suddenly, it works for some workbooks, but for some others, it just captures the data for the very last WS.

View 9 Replies View Related

Copy Data From Multiple Worksheets & Append To Single Worksheet

Feb 1, 2008

I have several exel workbooks (.xls files) and each workbook contains multiple worksheets. The number of worksheets and their names are variable. Each worksheet is formated in the same way. Now I want to copy an specific cell range on each worksheet and copy it into a single worksheet.

For example let assume that we have a a workbook called temperature.xls. This file contains 4 worksheets named: 40-1, 40-3, 40-5#, and 40-22. I want to copy a specific cell range (F46:O47) from all the worksheets in the workbook temperature.xls and paste only the values on a summary worksheet. This summary worksheet can be in the same workbook or in different one. I just wanted to add that I want to repeat this process 15 more times to summarize all my data containing workbooks. On average each workbook contains 35 worksheets so it is a tedious manual process.

View 2 Replies View Related

Combining And Rearranging Data Records From Multiple Worksheets To A Single Worksheet

Sep 13, 2009

I have a set of related variables that are split over multiple worksheets, and I need to be able to take specific information, duplicate certain values and produce an output sheet for use in a separate piece of software.

The variables are:
Position Number (Sheet 1)
Position Title (Sheets 1 and 2)
Position Requirement (Sheet 2)
Requirement Importance (Sheet 2)

The output sheet requires a list of all the requirements for each position number, which means the position number itself needs duplicating (in new rows) X number of times, where X is the number of requirements assigned. The appropriate requirements are then to be pasted in next to each position number (and the requirements can be found by comparing position number to title, and from title to requirements).

Normally, Id be able to do this using lookups and so forth, but my problem arises when I have multiple position numbers with the same related title (in the attached example, there are three plumbers with unique position numbers). I cant figure out how to say to Excel a plumber has five requirements, and there are three plumbers, so duplicate each position number for each plumber five times, then insert the appropriate qualifications (and their associated importance values) next to the position numbers.

View 4 Replies View Related

Create Formula That Transfer Data From Each Worksheet Tab?

Jan 12, 2014

I need a temporary database. What I need to do is to transfer data from each tab to a Masterfile tab. For example. I have Jan 1, Jan 2, Jan 3 tabs I need this to automatic transfer to Masterfile tab. I know I can copy/paste this BUT I have a LOT of data's like way back to June 2013 to present so I really need a way to do this easier.

View 6 Replies View Related

Copy Common Cells And Variable Range From Multiple Worksheets To Single Master Workbook

Apr 2, 2014

Basically, i have a common workbook template that is used by multiple users across the business to request a cost for numerous new products.

Within the template, there is a common section at the top, where specific project information is entered. There is also a table beneath where 1 or many products can be entered, with specific information relating to that product in the same row.

All the submitted requests are uploaded via an email attachment, to a particular sharepoint directory.

What i would like to do in the master workbook is the following:-

1. Open in turn every uploaded workbook within the sharepoint directory and copy the following cells into the master workbook, each in it's own row (or next available), with the data in adjacent cells.... 1st cell to enter data is $B6.

Cells to copy from each sheet:

Common info contained within cells:
$DG$2,$N$11,$N$12,$N$19,$N$13,$AO$7,$AO$8,$AO$9,$AO$10,$AO$11,$AO$12,$AO$12,$AO$13,$AO$14,$BO$8,$BO$11,$BO$14

Product specific info: $U37, $AD37, $AH37, $DH37, $C37, $O37

Depending on the number of products requested, we need to repeat (loop?) until it finds the next blank row in the table. I have hidden a blank row in the table, so there will always be one!

All of the common information needs to be included for each product specific entry.

For each file, once the upload has been completed, i would like the file to be moved to another "archive" directory.

I have attached the template for information. The master workbook is still in development so can't share currently.

View 12 Replies View Related

Copy Column Data From Multiple Worksheets To Single Worksheet Based On Header Criteria

Oct 18, 2013

I have a workbook with many sheets of similar but not identical data. I need to extract columns from each sheet based on 5 header criteria and paste them to a single sheet. Each worksheet contains these 5 criteria.

I've been working with the VBA script I've pasted below. It's grabbing the 5 column criteria that I have in sheet 12, and comparing them to sheet 1 in the workbook, then copying them to sheet 12. This much is good, but I need the script to also return the data from the other worksheets as well. I've tried modifying the script based on other loop functions in other scripts I've found, but I'm not having any luck.

View 14 Replies View Related

VB Code To Email Single Worksheet Within Workbook

Jan 27, 2009

I need a code to be applied to a VB button that will email out a selected worksheet within the workbook, lets say i need to email out sheet5. Is it possible when the button is clicked to bring up my email client, (it's not Outlook) with the file already attached so i just need to add the email address/adresses?

View 9 Replies View Related

Manually Calculate Single Worksheet Of Automatic Workbook?

Oct 3, 2013

I have a workbook with about 34 worksheets (one for every day plus a few extras). I have a summary sheet which collates all the data from each other worksheet. I have required a "MAX IF" type array formula on this summary sheet which slows everything down.

Is it possible to have the whole workbook in automatic calculation, but set the 'Summary' sheet to manual calculation when I press F9 or click on a button?

View 4 Replies View Related

Combine Multiple Files Into One Workbook (single Worksheet)

Apr 12, 2007

I've pieced together code from a number of solutions on the forum and figured out how to find the files I need to process, but can't seem to figure out the code to actually combine/append each worksheet into a single one. I've searched the "sea of options" on this forum and managed to do one thing well. Pardon all my notes embedded in the code below, but if I don't do it that way, I'll only confuse myself further (which is easily accomplished) ... or lose my notes!

Im going to run this code from an add-in menu, which is already created and working (yeaah!) so (I think) I need to have the code either create a file named "Master (Combined).xls" in the target folder ... or ... have a file already created in MYFOLDER and have this code delete all but the header row when the file is opened(???) The "Master (Combined).xls" workbook needs to consist of one worksheet named "Master". I want it to open the current workbook (.foundfiles(i)), select all the data, and append it to the master workbook on the "Master" worksheet (sheet 1). The Master Worksheet in the Master Workbook needs to start out as a blank sheet ... except for the header row. I can add code to put the headers in at the start, if necessary

Sub g_CombineMultWB_AllXLSFiles()
' This Will combine all XLS files located in the
' S:DMSMSPOMSMaster POMS NIIN DataMaster EMALL Data FilesEMALL Excel Folder
' into a single worksheet in a newly created (or previously existing) workbook
'
' LOCATION OF FILES (ACTUAL):
' S:DMSMSPOMSMaster POMS NIIN DataMaster EMALL Data FilesEMALL Excel Folder

Dim i As Integer
Dim wbResults As Workbook
Dim wbCodeBook As Workbook
Application.ScreenUpdating = False
Application.DisplayAlerts = False
Application.EnableEvents = False
' Application.CutCopyMode = False ' DO I HAVE THIS HERE FOR A REASON???

On Error Resume Next

Set wbCodeBook = ThisWorkbook
Const MYFOLDER = "S:DMSMSPOMSMaster POMS NIIN DataMaster EMALL Data FilesEMALL Excel Folder"
With Application.FileSearch
.NewSearch
' Change path To suit.............................

View 9 Replies View Related

Count Of The Number Of Worksheets From A Worksheet To End Of Workbook?

Aug 20, 2014

I have a function that counts my worksheets and I reference that to a cell so another macro that creates a new worksheet will be named +1 numerically. My problem is I need it to anchor on "MISLC" and count to the end of the workbook. Or start on the last sheet and count back to "MISLC"

VB:
Function Sheets()
Sheets = Worksheets("MISLC").Index - 1
End Function

View 3 Replies View Related

Import Multiple CSV Files From Single Directory And Include All Or Part Of Filename

Jul 18, 2014

I am looking for some VB to import multiple csv files, stored in a single directory, into a single excel worksheet. However I am looking to also include all or part of the filename, so to differentiate each file.

I've attached an example spreadsheet, inc the below code, of what I am trying to achieve.

Current code is (this parsers all .csv files in the specified folder into a single worksheet):

[Code] ......

Attached File : csv_loader.xlsm‎

View 6 Replies View Related

Excel Copies Cell From One Worksheet To All Worksheets In Workbook?

Mar 27, 2014

I have a table that lists names, eligibility and # of people. That is just one worksheet. I have a total of 30 worksheets in that workbook. The column with the names is completely filled out. I entered a number in the eligibility and # of people columns and Excel copied all three cells (name, eligibility and # of people) to the same cells on all of the worksheets. I have no formula in any of the cells, nor do I have anything linked.

Example:

1st worksheet - e19 - John Doe, f19 - Yes, g19 - 4

That information is then put on all of the other worksheets in those same cells, even though the worksheets are not linked in any way.

View 1 Replies View Related

Macro To Create Worksheet 'xxxx' And List All Worksheets In Workbook

Feb 2, 2009

I am after some code to create a new worksheet called 'xxxx' in my workbook, and then list all the sheets within the workbook (excluding the newly created 'xxxx' sheet.)

View 4 Replies View Related

Automatically Copying Data From Master Worksheet To Other Worksheets In Same Workbook

Mar 14, 2014

I have to input information into a master worksheet which contains data (employee names, location, start date and client) that then needs to be repeated in several other sheets. I want to input the data into a master worksheet and then automatically populate the other sheets with the data. If the data could then be filterable on each sheet that would be good.

View 9 Replies View Related

Transfer Single Line With Sum Of Multiple Lines

Oct 16, 2007

I import data into an excel spreadsheet where a unique job number may have multiple costs against it. These import as separate lines, repeating the job number.

The data imports on a sheet called 'DataImport'. From that sheet I transfer some of the imported fields onto another sheet.

What I need to be able to do is transfer the job number and a sum of the costs onto the other sheet.

The data is run regularly and I delete all the fields on the DataImport sheet in the macro each time the import is run.

View 9 Replies View Related

Renaming Worksheets In Files In A Directory

Jun 18, 2008

Hope i can get some help here as my vba experience is extremely limited. I'm trying to run a macro from a spreadsheet that will go down a list of file names that i have entered in a worksheet where the macro resides and open those spreadsheets and rename the worksheets in each file according to a list of names that i have entered in the 10 columns next to the file name. It's easier to explain with the layout of my macro spreadsheet: ....

View 9 Replies View Related

Copy Template Worksheet To Multiple Worksheets And Incrementally Number Sheets In Workbook

Mar 25, 2014

I have what is probably a simple request to all the VBA experts out there, and simply want to take a template sheet in a workbook and copy it across to 100 sheets numbered/named 101 -200, and add the name of each sheet as a text reference, e.g. sheet name 101 will have a cell within the worksheet that refers to sheet 101.

I have attached a simplified spreadsheet which indicates what i'm trying to achieve.

View 7 Replies View Related

Compare Formula- Workbook With Two Worksheets

Apr 3, 2008

I have a workbook with two worksheets

worksheet a holds the following information

column a - employee number, column b - distribution number, column c - account number associated with the distribution number.

worksheet b holds the following information

column a - employee number, column b - check number, column c - distribution number, column d - account number associated with the distribution number

what I want is a statement that will do this:

in worksheet b, take the employee number and distribution number in row a and find the row in worksheet b that is the same, then compare the distribution numbers to see if they match.

View 12 Replies View Related

Macro To Transfer All Data From One Workbook To Specific Sheet In Another Workbook

Feb 23, 2014

I have data in 2 different workbooks, and I need to transfer all data in 'Jx_ex1' to sheet1 in the 'template' workbook, and all data in 'Gr_ex1' to sheet2 in 'template' workbook. All data should be transferred to the same cell numbers, from A1 to Y5000. I actually have loads of workbooks to transfer to the template but if I have an example with the two then im sure I can work out how to modify it. All files will be in the same folder.

View 8 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved