So here is my little dilema,
I have a worksheet that I need help with using SUMIF function.
Basically how do i use this function to search for 2 sets of criteria as opposed to just 1.
I have an 'Update' Module that search the value of the Userform1.txt_sc.Value in Column B, but I want to search to 2 criteria, how can i amend the below code to search for 2 criteria ( userform1.txt_sc.value & userform1.txt_linenum.value )
View 2 Replies View RelatedI am new to VBA and am having difficulties in getting a find function to successfully locate search criteria within cell. When the search criteria matches exactly that of the cell contents then the code works; however should the search criteria only form part of the total cell contents (such as a seach for "the" in a cell containing "the cat sat on the mat") the code doesn't recognise it.
Essentially, I need the code to search a range for the required string and if found within a cell activate that cell and populate a combobox with the full cell contents of the activecell.offset(0,-2).
The relevant section of code attached below:
Dim role_count as range
Dim role as string
If Application.WorksheetFunction.CountIf(Range("Role_Count"), Role) 0 Then
Range("role_count").Select
Selection.Find(What:=Role, After:=ActiveCell, LookIn:=xlFormulas, LookAt:= _
xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:=False _
, SearchFormat:=False).Activate
Me.Controls(ComboBoxName) = ActiveCell.Offset(0, -2).Value
There are two sets of values.
The first one are located at Sheet1(a2.a6) and Second one are at Sheet2(A1.A1000). how I can write a VBA code to find the First value in Second set of values. If it found in second set, Sheet1.B1 will be entered as the found value from Second set of value otherwise "NOt found".
This task should go till the no of values in first set (in this example five times)
i need to count based on 2 seperate sets of criteria in the same row.
column G houses the total number of hits as a number,
Column E holds the division
Column B holds the job title,
rows 2 through 222
i need to sum up the numbers in each G field, where the G and E field match a specific text criteria.
I'm using a sumproduct forumla to count rows based on specific data in multiple columns. So if column A equals 1 and column G does not equal 6 and column M equals 4 then count that row. I know how to do this. The problem I'm having is that I want to count column A if equals 1 or 2. I tried adding an OR comand in with my sumproduct but it doesn't seem to work that way.
View 4 Replies View RelatedI have two sets of data:
Data set #1
Indicator PriceIndicator Price Date
2.1 10/27/08
2.11 10/22/08
2.17 11/21/08
2.38 03/20/09
2.38 03/25/09
2.46 03/19/09
2.5 03/09/09
2.5 03/24/09
2.53 12/04/08
2.73 12/09/08
2.82 12/24/08
2.83 12/18/08
2.89 12/12/08
2.9 03/13/09
Data set #2:
Close Price Close Price Date s1s2s3s4r1r2r3r4
2.25 12/11/09
2.30 12/12/09
2.40 12/13/09
2.00 12/14/09
2.12 12/15/09
2.50 12/16/09
2.51 12/17/09
2.53 12/18/09
2.49 12/19/09
What I'm attempting to do is find what are the CLOSEST four indicator prices in data set #1 are above (r1, r2, r3, r4) and below (s1, s2, s3, s4) the closing price in data set #2. Also, I can only use the indicator numbers in data set #1 that are on or before the close price date in data set #2. Because of this, not all of the r's and s's will be filled in.
I would like to use just regular excel formulas, but I have a feeling that VBA may be my only option.
I posted an earlier question about using a countif formula with two sets of criteria, Below is the formula I was given but for the life of me I can not get it to calculate. I have created a drop down box for each agent at my work and a drop down box for pass and fail. I want to keep a running total if they pass or fail on an assigment. I have labeled my worksheet phone.
=sumproduct((Phone!G:G="Fail*")*(Phone!B:B="Smith, John*"))
If I am using the "filter" function in Excel and some of the values in my list change such that the filtering criteria requires certain rows to be add/removed. Is there a way to have this filter automatically update as opposed to hitting the "reapply" button each time?
View 1 Replies View RelatedI have a workbook with many many sheets in it. The first sheet contains a single column with about 10,000 different values. I'd like to use each of these as search criteria against ALL data in the other sheets (of which there are a good 50 or so). If matches are found (they don't have to be exact case), then I'd like two things to happen:
1. The rows containing the matched search criteria in the first sheet are highlighted.
2. In the cells adjacent to the search criteria in the first sheet, hyperlinks to the matched data are created and named after the sheet upon which this matched data appears.
I've attached a sample file to this post with ideal sample 'answers' to queries made of the first 2 terms.
Using the search macro code below, could someone please help to add in more codes what I'm currently using, and also where to insert it. The Search function works well for what I need and it helps me to locate data. When using the search function somehow it search all sheets within the workbook but I only want it to search an array of sheets when using this macro that is needed to complete the task for what I'm after.
Macro
Public Sub FindText()
'Run from standard module, like: Module1.
Dim ws As Worksheet, Found As Range, rngNm As String
Dim myText As String, FirstAddress As String, thisLoc As String
Dim AddressStr As String, foundNum As Integer
myText = InputBox("Enter the text that you want to search for:", "Start Search!")
If myText = "" Then Exit Sub...................
I'm from Bavaria, Germany. Right now, I am doing an internship for my studies. my problem: I need a search procedure which shows an Input Box where you can enter a word to search for. It should work like the original Excel search (Ctrl-F), but with a simpler design, like with my own Text "Enter your Query" and a Button "Submit Query" / "Quit search". Is there the possibility to Highlight the Search Target? The problem hereby is that this highlighting should not be permanent. That means the user sees the target for which he searched for, the cell highlighted in a different color, etc. But as soon as the user clicks onto another cell, etc., the highlighting vanishes. If there is no fitting match, there should be a MessageBox like "Sorry the Target xyz cannot be found"
View 9 Replies View RelatedI' having trouble using the =IF(ISNUMBER(SEARCH formula to search multiple cells.
I can get it to work to search one cell (as below):
=IF(ISNUMBER(SEARCH("Same",G10)),"No Change",'Aug 09 Matrix'!F10)
(In this case the respone is No Change as Cell G10 contains "Same")
However cannot get it to work for several cells. I have pasted below and highlighted the function I would like it to perform:
=IF(ISNUMBER(SEARCH("Same",G10:R10)),"No Change",'Aug 09 Matrix'!F10)
Essentially the other cells in that row (G10:R10) all contain "Same", however for some reason it is identifying this as FALSE and putting in the data from the 'Aug 09 Matrix' sheet.
Below is a series of sets. Column A is the set number. I need a macro that will insert a row between sets and then put a border around each set. In my spreadsheet the sets are from A1:C500. Sometimes the sets are only 1 row, sometimes multiple rows. It looks like I will be doing one of these sheets every week. So far I have been doing it manually, but a macro sure would save some time.
View 13 Replies View RelatedI am trying to match data from 2 independent sets, formatted slightly differently so not sure which function would work best for me. From the attached file, I am trying to match the date and time stamp (in cell A1) with that from the other data (in this example in cell E1) and return the data (from cell F1) to cell C1. So basically any date and time stamp before 04/03/09 04:00 will return a value of 44 (this value should appear, therefore in cells C1 - C30)
View 2 Replies View RelatedI have a spreadsheet with a database search function incorporated. Whilst this works fine, I was wondering if there is a way to combine the current single query searches into one search macro. I have setup a userform called CriteriaSearch that I would like to use to search my database tab. An example search would be:
User requires someone who speaks French (5), is female, has a rank of 3, is available immediately and has notes/keywords/keyphrases of "excellent linguistic and cultural knowledge". The appropriate fields on the userform are populated accordingly. The user selects search and a macro runs to find matching records. To make things slightly easier, the criteria (Language, Gender, Rank etc) all have fixed column references.
I am trying to find the best way to give a result based out of two criterias. My original list is 1000+ row long, so I am expecting that my vba code will be refering to a worksheet with this list on it.
The list will look like this :
Group SubgroupName1aaaname11bbbname21cccname32cccname42dddname42dddname5
I will always have the group and subgroup available and I want to get the name.
So I would like to write a function or a macro that would look for the specific group and subgroup and return me the name.
I have a search macro that runs from a command button on Spread sheet Called "find". This currently takes what ever the user types in cell A1 and then searches another sheet called "data" for any instances of what ever the user entered in Cell A1. I want to have a text box on sheet "find" and use that instead of Cell A1. (To keep this posting as short as possible I wont explain why I need to do this). I cant get the syntax right to refer to the text box - can someone point me in the right direction please.
View 7 Replies View RelatedI would like to use the search function in vba to look for a 5 digit number in sheet1(at a specific cell) from a list in sheet2- ie the range. Am I using the range correctly? This code is in a command button in sheet1.
Dim Z As Integer
On Error Resume Next
Z = Application.WorksheetFunction.Search(111, Worksheets("Sheet2").Range("a1:a100").Value, 1)
[Code].....
I need to create a function that searchs one definitive word or phrase inside of a text in the Excel and creates a vector with the address of the cells that contains it.
Inside of this function, to create the option to change the color of the source or the color of deep, or to erase the indicated cells
Function SearchValue(SearchedValue As String, Interval As Range)
Dim Célula As Range
For Each Célula In Interval
If InStr(1, UCase(Célula.Value), UCase(SearchedValue)) 0 Then
If IsEmpty(SearchValue) Then
SearchValue = Célula.Address
Else
SearchValue= SearchValue & ";" & Célula.Address
End If
End If
Next Célula
End Function
Can you use the Search function in VB? If so what's the code? Do you have to call it first ( Call Search .....)
View 2 Replies View RelatedI am looking to search in a table (say 4 columns) corresponding to multiple criterion (one for every column except fourth) and returning the values which are numerous (from column 4). I have tried the INDEX function but it only gives me one of the many cells. I am working on a table with +20000 cells per column
View 3 Replies View RelatedI am trying to add up all values from the cell above the search criteria. Although sumifs does work well, it wont search the entire sheet, it only works in specified rows.
Also, the problem is that the values to be added are determined via a vlookup based off of a cell whose value is chosen by a drop down choice.
I have an Excel Sheet with three columns of data. In a separate worksheet, I am setting up some calculations. To do so, I am having the user select from a drop down list, the data in the first and second columns. Based on the two values selected by the user, I would like to bring forward the value in the third column. Can someone please help me out with the formula to do so?
View 14 Replies View RelatedI need a formula that will tell me what Tracking # in the spreadsheet has multiple dispositions and what those disposition are. I need the formula to use column and cell coordinates and not using word searches.
example
Tracking # Req.# Disposition
1490069 045 snakes
1015907 047 candy bars
1488026 044 chickens
1015907 047 sand paper
1015907 001 fruitcups
1490129 046 cupcakes
1484817 043 Cats and dogs
If I have a 'key' value in a cell in one sheet, i want to use that value to find the cell in another sheet containing the 'key' and return the row number of the cell, if more than one value then I would like to be able to loop through all the rows containing that 'key' value returning the row number of each hit, kind of a programmatic version of vlookup?
I want to display multiple results based on 2 search parameters, where by when I enter flight number and Dep. Airport it matches the trip numbers and dispalys all the rows matching all flight number and Dep. airport based on the unique trip number.
Notice: - one trip number could consist of multi flight sectors.
1) Explanation of the data :
MMM1805 = flight Number
935 = dep. time
$AS41 = registration code
[Code].....
I have data on one sheet which has many columns, but i need a formula that will show in a different sheet all cases where column C matches my search criteria but only those cases where column D has the value YES, and should return only the data from Columns A, B and E. I also need a formula that will show only the count of where my search criteria is met.
View 3 Replies View RelatedOn my spreadsheet i want to find the results from 2 criteria that i entered.
My search criteria are "Oostbos" and "AA8", and excel has to find this from another spreadsheet that i made for rostering.
OostbosN3 evelineAA8N3 evelineAA8N2 MargaAA7
The problem is that i have multiple shifts with the "AA8" criteria, but my function only finds the first one.
I used the following function:
Code:
=IF(C8="";"";INDEX('Afdeling PG PH'!$A$6:$A$28;MATCH(C8&$A$7;'Afdeling PG PH'!$B$6:$B$20&'Afdeling PG PH'!$AI$6:$AI$20;0)))
Also when the AA8 cel is empty that i doesn't show anything.
How the second N3 eveline, shows the 2nd result and so on.
I created a userform for a giant spreadsheet with tons of data in it. There are three criteria. I created two command buttons - one that's "search" and one that's "close." The close works fine, but I don't know enough to program the "search" command. I'd like it to pull all data that matches the three criteria - rows H, D and M. So, if you answer all three, the macro will pull the rows of data that matches and paste it into another workbook (that opens in another window).
I'm not sure userforms are typically used for this sort of thing...