I'm trying to develop a formula that can incorporate the search function in amongst a countifs formula. I have a column that contans the string "2.3 Manage Project Delivery" in a single cell. However, a single cell could also contain this text string in amongst other text and be in there multiple times - E.G; "2.1 Manage Customer Support, 2.3 Manage Project Delivery, 2.4 Close Program, 2.3 Manage Project Delivery" etc
My formula currently looks like this: =COUNTIFS('RDC Register'!$AW:$AW,"Not Overdue",'RDC Register'!$C:$C,"2.3 Manage Project Delivery") but it's not counting the cells that have 2.3 Manage Project Delivery in it more than once.
So basically I need to modify my formula to search for this text string in the cell and add all occurrences to the final count.
I have this search function that works well: =IF(ISNUMBER(SEARCH("which is < ",E9)),"test ok", "not ok") my E9 cell contains the phase: "I have a number which is < 9, and which is positive..." E9 has "which is < ", then i get back "test ok"
My question is.... how can I do this multiple times within the same function/cell. i.e. if I wanted to search "which is < " and/or "positive" in the same cell, then i get back "test ok", "positive number") I keep trying all combinations to no avail, like: =IF(ISNUMBER(SEARCH("which is < ",E9)),"test ok", "not ok"), =IF(ISNUMBER(SEARCH("positive",E9)),"positive number", "no good")
Keep in mind I am using a numeric example, although I am using this function to check if part of a cell matches specific text...
The fact that my second brand name is written with spaces ("J & B") could be adding to the problem, I don't know. I thought replacing the "C" with another "IF(ISNUMBER" function should work, but I have been unsuccessful at writing a formula that doesn't cause run-time errors.
Using the search macro code below, could someone please help to add in more codes what I'm currently using, and also where to insert it. The Search function works well for what I need and it helps me to locate data. When using the search function somehow it search all sheets within the workbook but I only want it to search an array of sheets when using this macro that is needed to complete the task for what I'm after.
Macro Public Sub FindText() 'Run from standard module, like: Module1.
Dim ws As Worksheet, Found As Range, rngNm As String Dim myText As String, FirstAddress As String, thisLoc As String Dim AddressStr As String, foundNum As Integer
myText = InputBox("Enter the text that you want to search for:", "Start Search!")
I'm from Bavaria, Germany. Right now, I am doing an internship for my studies. my problem: I need a search procedure which shows an Input Box where you can enter a word to search for. It should work like the original Excel search (Ctrl-F), but with a simpler design, like with my own Text "Enter your Query" and a Button "Submit Query" / "Quit search". Is there the possibility to Highlight the Search Target? The problem hereby is that this highlighting should not be permanent. That means the user sees the target for which he searched for, the cell highlighted in a different color, etc. But as soon as the user clicks onto another cell, etc., the highlighting vanishes. If there is no fitting match, there should be a MessageBox like "Sorry the Target xyz cannot be found"
Im am trying to create a search marco button that allows me to search in multiple worksheets in one work book. I came across this CODE the first part of it works. It pops open user input box and ask for the word that i would like to search but the this error message pops up Runtime error1004 Method 'range" of object'_Global'failed and i dont know what to do
Private Sub SearchButton_Click() SearchString = InputBox("Enter Search String", "Search") If SearchString = "" Then Exit Sub For Each c In Range(myRange) If InStr(LCase(CStr(c)), LCase(SearchString)) Then
I have a workbook with many many sheets in it. The first sheet contains a single column with about 10,000 different values. I'd like to use each of these as search criteria against ALL data in the other sheets (of which there are a good 50 or so). If matches are found (they don't have to be exact case), then I'd like two things to happen:
1. The rows containing the matched search criteria in the first sheet are highlighted.
2. In the cells adjacent to the search criteria in the first sheet, hyperlinks to the matched data are created and named after the sheet upon which this matched data appears.
I've attached a sample file to this post with ideal sample 'answers' to queries made of the first 2 terms.
I have 6 worksheets with data. Column C of every worksheet is filled with unique Tracking Numbers.
I want to create a 7th worksheet with a search function. Users will be able to type in a Tracking Number (on cell A2), and information associated with that Tracking Number (from Columns A, D, E, F and G of worksheets 1-6) will show up beneath cell A2 on cells A4, B4, C4, D4, and E4.
I have an 'Update' Module that search the value of the Userform1.txt_sc.Value in Column B, but I want to search to 2 criteria, how can i amend the below code to search for 2 criteria ( userform1.txt_sc.value & userform1.txt_linenum.value )
I need one formula to copy and paste the checkcard data changing it from this "CHECKCARD XXXXXX5623" to "CHECKCARD 5623", but I need one formula to look for multiple known checkcard numbers. I will have more then one typically in the bank download so I need to search and copy at least two known numbers as shown below.
I am providing the formula that I am using right now, "=IF(ISNUMBER(SEARCH("5623",B3)),RIGHT(B3,41),"")" but it only works for one checkcard number? Also I don't really need to capture the DEBIT or CREDIT that will always be at the end, it would be redundant. If it's easier to write the formula including that data that is no problem. What I want to copy and move into an adjacent cell is in red.
Here is the source data: Row 2 - SONIC DRIVE IN#1531 AUSTIN TXDEBIT FOR CHECKCARD XXXXXX5623 DEBIT Row 3 - JASON'S DELI # 125 Q64 AUSTIN TXDEBIT FOR CHECKCARD XXXXXX9718 DEBIT
I want to find a content of ActiveCell only in column "C", beginning from cell C4.What must be in Look in, and Look at?How to accomplish to match whole number,ex. "1" in cell with "1",no to find "1" in "123"
This function searches in whole sheet,but i need only in C column! Cells.Find(What:=ActiveCell, After:=[c4], LookIn:=xlValues, LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:=False _ , SearchFormat:=False).Activate
I am trying to code a macro that will search through a selected range of cells for key letters, for instance this cell may contain any combination of B, C, Te, Tc, RH, or LH. I would preferably like to search with capitalization being a factor but it is not a deal breaker. Below is a sample of what i have if the cell has a B, C it works for B but ignores the C i need it t o recognize both.
Code: If InStr(1, ActiveCell.Text, "B") Then Range("O" + CStr(ActiveCell.Row)).Select With Selection.Interior .Pattern = xlSolid .PatternColorIndex = xlAutomatic .color = 65535 .TintAndShade = 0 .PatternTintAndShade = 0
I am having such a difficult time creating a macro that will reduce the 5+hours I have to spend each week manually copying & pasting all of this data. I making an IMMENSE difference in this worker bee's life!
I have a workbook with two sheets (Sheet1 & Sheet2). Sheet1 has license #'s in column A and the state that the license belongs to in column B like this:
COLUMN ACOLUMN B11111Alaska11112Alabama11113Arkansas11114Arkansas Sheet2 has three columns. Column A has the license #'s, column B has the state that the license belongs to and Columns C shows a line-of-authority tied to that license #.
I'm trying to write a macro that will compare the license # and state in Sheet1 to the license # and state in Sheet2. If it matches, append the contents of Column C to the corresponding row in Sheet1.
Here's the thing...Sheet2 contains the entries for all licenses in the company (so this table is HUGE). And there are multiple entries for each state license # (notice how there's two entries above for AK license # 11111 - one for the Property line and one for the Casualty line.
After my macro is run, I want Sheet1 to show all the lines-of-authority on a single line. So if I ran my macro on the above example, after it's run I would have this in Sheet1:
COLUMN ACOLUMN BCOLUMN C11111AlaskaProperty Casualty11112AlabamaProperty Casualty11113 ArkansasLife Health11114ArkansasLife Health
I have been using a macro to search and highlight customer addresses for me, however I have changed my worksheet and now have the addresses in two columns instead of one (D for the numbers, E for street names) for sorting purposes.
What I would like to do is either; find a way to search using data from 2 cells to get a result, or have multiple results highlight and popup.
Using: Excel 2010
Code: Sub SEARCH_FUNCTION() Set FoundCell = Sheets("Route").Cells.find(What:=Sheets("Intro").Range("G15"), LookIn:=xlFormulas, LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:=False, SearchFormat:=False) If Not FoundCell Is Nothing Then With FoundCell
I'm building an inventory report based upon a daily report downloaded from a website. The downloaded report changes from day-to-day. All of the data I need remains there, but the location of the columns changes, with the exception of "BOL". I need to sort all of this data in a macro. I have most of my macro figured out, but I'm having trouble with one "sort". I need the data to be sorted FIRST by whether or not the 4th column contains "Clear" or "Dyed". I have the next two sorts already coded, based on SPOT vs Contract and then numerically by column A. But I cannot find macro coding or an excel formula (either would work) that reliably searches the 2nd column for the word "Clear". I have tried different combinations of IFERROR, FIND, SEARCH, IF, ISNUM, etc. in hopes of writing a new adjacent column containing the values "Clear" and "Dyed". I have found many combinations that work if I search only the correct cell. But when I extend the range to search through ~26 cells in one row, they all fail. Below is a (small) example of what I start with and what I want to end with. I've also included my current relevant Sorting code in my macro.
I would like to perform a search on only the worksheets listed in a worksheet titled table of contents. I would like to use multiple criteria for this search and send only the unique results to a worksheet titled results. Each worksheet listed in the table of contents has a cell address for each heading that I would like to extract data from the same column. The attached workbook example shows the data that I would like to collect when I search for cells that begin with "AB" and cells that begin with "CD". I collected this data by copy and pasting all the data from each worksheet into the results page and then applying filters and advanced filter to remove duplicates. This method does not work well for the original workbook as the data is quite extensive.
My Excel program (Excel 2010) currently has several columns and each column looks for and pulls data from a specific file on my computer. Then I need to delete any duplicate data entries, count the number of unique entries and track the changes through a chart. I have everything done except I cannot figure out (or find on the internet) a way to search in multiple columns (more than 2) and delete just the duplicate cells. I want to delete the cells in a way where there is one left. For example if the code 12gf is duplicated three time, I want to be left with one 12gf (it doesnt matter what column the original one is left in). Additionally, column length changes and they are not sorted. I have attempted to attach an image of an example file below.
What i have so far is: -3 Sheets (Sheet1 - Search, Sheet2 - Data, Sheet3 - Result) -Sheet1 has a userform ready to link up - this opens up when workbook and worksheet is activated. -Sheet2 has some example data to search - the search is for column 1 (see attachment) -Sheet3 has a template ready for the data to be pasted to.
I would like the search result is column 1 to copy the data from columns 1 to 7 to sheet3.
I want the template/layout to remain after the pasting of results. (everything protected from editing, if possible).
Once finished (ie go back to sheet1, i want the data from sheet3 to be cleared.)
I would like to use the search function in vba to look for a 5 digit number in sheet1(at a specific cell) from a list in sheet2- ie the range. Am I using the range correctly? This code is in a command button in sheet1.
Dim Z As Integer On Error Resume Next Z = Application.WorksheetFunction.Search(111, Worksheets("Sheet2").Range("a1:a100").Value, 1)
I need to create a function that searchs one definitive word or phrase inside of a text in the Excel and creates a vector with the address of the cells that contains it.
Inside of this function, to create the option to change the color of the source or the color of deep, or to erase the indicated cells
Function SearchValue(SearchedValue As String, Interval As Range) Dim CÚlula As Range For Each CÚlula In Interval If InStr(1, UCase(CÚlula.Value), UCase(SearchedValue)) 0 Then If IsEmpty(SearchValue) Then SearchValue = CÚlula.Address Else SearchValue= SearchValue & ";" & CÚlula.Address End If End If Next CÚlula End Function
How I could create a search function with this document attached. I want to be able to pull the kids name, location & information over to a search engine when looking for them because I will have over 40 different worksheets with numerous names on each of them.
I'm having trouble finding the correct way to use this formula. Basically, I need the formula to populate what is in another cell, minus any apostrophe's ( ' ) that are in the text. Sometimes the text contains the apostrophe and other times it does not. I just want whatever text is in the cell to populate, whether it contains an apostrophe or not.
Here is what I've been using so far, but it only produces a value if there is an apostrophe. If there isn't an apostrophe in the text, nothing populates.
I would like to search a cell and look for a certain value in it, and if it is, for there to be an X placed in another cell. Column A has the values, I would like to put the function into column B, and the X to appear in column C. I will attach a spreadsheet if it is needed, for this particular function, I will say we are searching for PP in the cell