Header For Continuing Pages
Jan 16, 2010
I have an Excel 2007 Workbook that is used to do a variety of different reports. Each spreadsheet within this Workbook is a different report. All reports need the same Header format that is linked with new data that is entered with each new report. The reason I need a header is because each report may vary in size from 1 page to 6 pages, it all depends on how much is reported on and a single completed report will use a combination of other reports.
Here below is a format that I am trying to achieve
(Linked Data) ‘Employee names located top center
Date: (Linked Data) ‘With Date: texted before link, located left index
Address: (Linked Data) ‘With Address: texted before link, located left index
Or should I just use
=Sheet1!A1:C1
On Sheet1 as source to other sheets, but if I do this how do I use this like a header for continuing pages
View 2 Replies
ADVERTISEMENT
Jan 14, 2009
I have a layout for printing as attached. This is a front carton label. Depends on the carton qty, I need to print many times of those pages whether changing the carton times before every print out. For instance I print from 1 to 550. Each time I modify the carton numbers and printing it, that means 250 print job! I want Excel prints all(between) pages with given first and last carton numbers , is there a way to do it?
View 4 Replies
View Related
Sep 23, 2009
If Then Else not continuing. What is wrong with
View 5 Replies
View Related
Jul 11, 2008
From cell A1 to A10 I have the figure 5412587
In cell B1 I want the figure in Cell A1 to concatenate with the figure one but in cell B2 instead of figure one with figure two etc. etc.
So B1 will be 54125871, B2 54125872, B3 54125873 etc. etc.
the formula would be Concatenate(A1&1). I want the "one" in this formula to be increasing so in B2 will be Concatenate(B1&2) et.c etc.
The problem is that I dont want to add an extra column to replace the 1, 2, 3 etc. in the formula.
View 9 Replies
View Related
Feb 20, 2009
I'm trying to execute a macro and it won't put the focus (radio button) to select x pages wide by x pages tall in the Page Setup/Page/Scaling Area. I looked at the macro and can't find a setting in the code but yet the focus won't change. What can I do about this? In other words the radio button stays selected as "adjust to "" % of normal size. Here's the code...
View 2 Replies
View Related
Jun 21, 2012
so on sheet 1 i have a list in column b (as below) and in column G I want to put a note "not included" if the cell matches what is in sheet 2:
AAA
BBB
CCC
DDD
EEE
On sheet 2, column A I have a list of items that I want to not include which I want to be able to add/remove/adjust over time. For example:
DDD
EEE
FFF
LLL
I can get it to put in the correct text into sheet 1 with the following but I don't know how to get it to look through all values on sheet 2 and then only enter the "not included" on sheet 1 if it is listed on sheet 2.
So far I have
Sub checksheet()
For Row = 1 To 428
For col = 2 To 256
[Code]....
This only does it for what is written in cell A3 on sheet 2 and does not keep going down the list in sheet 2.
I think I need to define the range better on sheet 2 and ask it to look through that, but im not too sure.
View 4 Replies
View Related
Feb 11, 2013
IF(A1=1400,(AVERAGE(A1:A2)),"")
Placed in column B.
This formula will do what I want, but 1400 may show up 5 times in 20,000 rows. You can change them to values and delete the blanks to move them up where you can see them.
1. That is more time.
2. This is living data changing all the time, so I need the formulas to remain.
Is there a formula that will place each event under the previous in the column B? The first event in B1, second B2, third B3, and etc.
View 9 Replies
View Related
Dec 1, 2009
Im looking to ensure the sheet contents are clear before continuing with the macro routine. At the moment however, the macro runs I see the data flash up and then off. So it appears the data is being cleared as soon as it loads. Current code is:
View 2 Replies
View Related
Mar 2, 2012
I'm trying to write some code that will check if specific files in a folder are present before continuing code.
I've looked on-line and found various code that checks if a single file is present whereas my requirement is slightly more demanding.
Some files might be present and others not. The code must check ALL necessary files are there then run main code. If even any single file from say 5 files is missing, code must exit.
I was thinking of using an array to store all files names and then use a "For Each XX In XX" to loop through the array and check each file is present?
This is what I have so far:
Sub XX()
Dim strPath As String, LinesDelete As String, Applepnfile As String, MpnStock As String
Dim myArray() As Variant, myElement As Variant
Dim myArray() As Variant, myElement As Variant
strPath = "Z:AppleApple Deliverys"
[Code] .........
View 5 Replies
View Related
Dec 10, 2012
I want to make continuing serial numbers in excel in order to print labels to be able to track my deliveries. i know i can drag the fill cursor to automatically make it go the next number. however i also want my serial number should represent the month and the day the invoice was printed.
for example i want the serial number should be
column a (Jan 01) column b (Jan 02 ) column c (Jan 03)
a1-01-01 a1-02-01 a1-03-01
a1-01-02 a1-02-02 a1-03-02
a1-01-03 a1-02-03 a1-03-02
The first number represents the month (example -a1 for Jan)
The second number represents the day and
The third number represents the invoice
How can i make that when i pul the cursor down it should continue with the invoice number
However when i continue right it should move the day number?
View 2 Replies
View Related
Jun 11, 2013
Basically, in the "Thisworkbook" code , i have some code in the Workbook_BeforeClose section. Currently , it autosaves the workbook in a folder i have specified.
However, i need to add some code.I want to check that a certain cell has a value in it before the user closes the workbook, and if the cell is empty, show a messagebox asking him to enter a value.
I know how to get a messagebox to pop up, the only thing is once the user clicks the OK button,
i need the rest of the code execution to pause, allowing him to make the change then if he clicks the "X" (top right of the screen) to close the file or application, the filesave dialog appears and he can then save the document.
how to go about this because at the moment when user clicks ok, the messagebox just disappears and filesave dialog appears and he doesn't have a chance to edit the cell.
View 5 Replies
View Related
Jun 23, 2008
Is there a way to link a header or a portion of a header to a specific cell?
View 14 Replies
View Related
Nov 18, 2011
I've been trying find an appropriate formula to extract the column header from a table in a different sheet if the row header and value in that table is known.
in the lookup table the row titles (column A) are product codes, column titles (row 2, D through AX) are business names and the table values are quantity.
In a different table I have product codes in column A and in column B i have the max number/quantity of products for that code. In column C i want to put the company name associated with the product and the number/quantity.
View 4 Replies
View Related
Mar 5, 2009
I have a booklet I want to print from Excel 2000. I'm not seeing how to have the HEADER on page one only. The header is coming up on all pages. Is there a way to tell Excel to print the Header on page one only?
View 2 Replies
View Related
Oct 30, 2008
I have a website with lots of pages and I have a tool where I can see how many visits these pages get. What I want is to find out which pages didn't get any visits.
So I have in one column all the pages URL's on my site
In the other column I have all the pages URL's that have been visited, and in the column right next to it I have the amount of visits that page has received.
For example, this is what it looks like today:
column A:
row 1: /site/hello.htm
row 2: /site/how.htm
row 3: /site/are.htm
row 4: /site/you.htm
column B:
row 1: /site/are.htm
row 2: /site/hello.htm
column C:
row 1: 10
row 2: 20
Ideally the URL's that have been visited should show up on the same row as the URL in column A, and then for the ones that have not been viewed it will just be blank in column B and C.
so in the above case it would look something like this:
column A:
row 1: /site/hello.htm
row 2: /site/how.htm
row 3: /site/are.htm
row 4: /site/you.htm
column B:
row 1: /site/hello.htm
row 2: [blank]
row 3: /site/are.htm
row 4: [blank]
column C:
row 1: 20
row 2: [blank]
row 3: 10
row 4: [blank]
View 13 Replies
View Related
Aug 20, 2014
I am trying to create a PDF of every 2 Worksheets. I currently have this code that creates my PDFs for each individual sheet but I need it to group 2 together. Ex: Sheets 1 & 2 a separate PDF, Sheets 3 & 4 a separate PDF and so on.
[Code] ......
View 5 Replies
View Related
Nov 7, 2007
Is there a way to insert a cell/row, and add data to one page/tab, and have it automatically insert a cell/row and add the data on another page/tab?
Excel 2003 is the version I am using.
View 14 Replies
View Related
Nov 25, 2008
I opened an Excel file, and the whole page is grey. I can't see the cell lines at all. How do I get it back to white with all my gridlines?
View 3 Replies
View Related
Dec 19, 2013
I'm trying to find an easy way(or any way) that I can have excel automatically insert a page number into my document. I'm looking at 60+ pages on separate tabs that I will be adjusting and modifying for a few weeks yet and I don't feel like continually fixing page numbers.
View 3 Replies
View Related
Mar 27, 2009
I have a user form that has several tab pages on it when the form opens it checks to see if the user has entered there default info if it is empty it needs to go to the default tab so the user can enter there info. How do I do this using vba in excel 2000 I have not been able to find any code that will do this if I use the set focus option for a text box on the tab page it comes up with an error saying the item is not visible! The user forme is names = UserDataInputForm. The tab pages I have are
1st = InputDailyTimesPage
2nd = OverTimePage
3rd = DataPage
4th = DefultDataPage
the form opens using the 1st tab page by default
in the user forms inisilisation code I have this check
View 2 Replies
View Related
Dec 14, 2012
I have created a spreadsheet which serves as a reporting portal - if you select a product from a drop down, the spreadsheet automatically updates with data regarding that specific product. I would like to give my worksheet the ability to select a new item from the dropdown (that part i can do) and then print each of these product reports (1 page each) and aggregate them into one large pdf.
View 2 Replies
View Related
Jun 20, 2007
I have a formula that checks the previous page(Tab) for a figure so the formula goes =SUM(F37-'05-27-2007 thru 06-02-2007'!F37). Is there a way to instead of asking for the page '05-27-2007 thru 06-02-2007' to have it generically ask for the previous page?
View 9 Replies
View Related
Sep 15, 2014
I have a long growing statistical report(18 pages + more), and 14 of the pages will use report table headers. I went into the page set up and selected the row to repeat on each page. I do not want the table headers on any pages after 14. The rest of the report is formatted differently and does not use the row headers. but all of the information is related. Is there a way to only show the row headers up to page 14? I can't use headers and footers, of course. The report will be set in one place and the user will print it out once a week. It seems as if this cannot be done but I this is my last resort.
View 4 Replies
View Related
Jul 14, 2014
I am trying to print this document and it has several pages.
My problem now is I don't want to copy the header (all content of Cell 1 to 4) into all the pages.
Is there a way I can leave it the way it is and it will reflect on all the printouts?
I mean on all the pages that will be printed?
View 4 Replies
View Related
Dec 10, 2008
My question is about webqueries... specifically how to set up a query that will automatically fetch data on different pages (same data, but includes page 2, page 3, page 4, etc )
I've just figured out how to import a "new web query," but it seems like I won't be able to import 63 pages of it unless I do all of them by hand.
View 7 Replies
View Related
Mar 18, 2013
I have a workbook that has a total of 128 pages. The problem is that a lot of those pages won't be used. Basically I have a sheet that needs to be filled out for each day up to around 30 days, sometimes more, most times less.
Currently I have created all the sheets that I will typically need (31 daily's, 31 daily printable reports).
Data is entered into the daily (and other spots) and then with the use of formulas transferred to the report sheet which is hidden and then printable with the use of macros.
I also need to withdraw some of this information (CSV File) to be able to populate a database.
Is it possible to have my "daily" page as a template and then create the subsequent pages as I need them? (this would have to be done with a bunch of other report pages as well). For ease of use I would need all the formulas etc that I currently have to be able to be "created" as well. As an example, there is a running total of costs associated with the "daily" pages that would need to be carried forward.
View 8 Replies
View Related
Feb 19, 2014
I work for a construction company, Someone else created a workbook a few years ago with 140 similar pages, each listing a separate piece of equipment as a service record. I need to print these out randomly for mechanics to update with new information, as they service the machines. However, some of the pages of the original workbook are goofy and the workbook as a whole could be improved. But, oh that many pages!
I have worked on a new template page for entering information to make the worksheets all cohesive and updated. Is there an EASY and/or FAST way for me to copy this page 150x to make a new workbook, and just enter my data onto each new page? I really don't want to reformat each page of the original workbook individually to see if I can fix all the glitches and weirdnesses that have occurred on the pages over the years. I thought it would be much easier to retype the data onto new pages.
View 6 Replies
View Related
Mar 3, 2014
I was trying to print a workbook which was about perhaps 20-30 sheets of roughly one page of printed info each. However, I saw the print job and it said it was printing over 7,000 pages!!!
It turns out there were about 4-5 worksheets which were blank (and also didn't have gridlines even though gridlines were checked on in options).
When I switched the sheets to page break view, lo and behold each sheet contained a few thousands "pages". I simply can't seem to reduce it down to a relatively normal size.
I tried going right past the edges of page 1 and deleting all columns/rows to the right and bottom of it to no avail. I selected the whole worksheet and removed all borders and any cell content with no luck.
I saw other "solutions" on the internet about copy/pasting the other unaffected sheets to a new workbook and deleting, but this seems cumbersome.
View 1 Replies
View Related
Nov 21, 2008
In A1 of Sheet1, I'd like to display the number of pages Sheet2 will be when it prints out. I have no idea where to start.
View 2 Replies
View Related
Jan 3, 2009
i want it to stay on working sheet asit prints out the selected sheets below.
is there anyway to stop this from showing the sheets? ie stay on working sheet
View 14 Replies
View Related
