Printing Several Pages With Continuing Carton Numbers
Jan 14, 2009
I have a layout for printing as attached. This is a front carton label. Depends on the carton qty, I need to print many times of those pages whether changing the carton times before every print out. For instance I print from 1 to 550. Each time I modify the carton numbers and printing it, that means 250 print job! I want Excel prints all(between) pages with given first and last carton numbers , is there a way to do it?
View 4 Replies
ADVERTISEMENT
Jan 16, 2010
I have an Excel 2007 Workbook that is used to do a variety of different reports. Each spreadsheet within this Workbook is a different report. All reports need the same Header format that is linked with new data that is entered with each new report. The reason I need a header is because each report may vary in size from 1 page to 6 pages, it all depends on how much is reported on and a single completed report will use a combination of other reports.
Here below is a format that I am trying to achieve
(Linked Data) ‘Employee names located top center
Date: (Linked Data) ‘With Date: texted before link, located left index
Address: (Linked Data) ‘With Address: texted before link, located left index
Or should I just use
=Sheet1!A1:C1
On Sheet1 as source to other sheets, but if I do this how do I use this like a header for continuing pages
View 2 Replies
View Related
Dec 16, 2009
I having troubles getting a part of this script to do what I want and was hoping someone could point out what to try. What I need is when the user is asked to enter the amount of pallets. The number they input is placed into a cell.
Here is the problem.
I'm looking for a way to start at number 1 and work up to the number the user placed in the input box. For example if the user put 5 in the input box Range("F37") Would read 5 then in range("A37") the number would read 1. Then the page would print ,the next value in Range("A37") would be 2 ,then print and so on up to 5. So the end result I would have 5 pages that printed with the only differnce being Range("A37") Value being 1,2,3,4,5.
View 2 Replies
View Related
Dec 10, 2012
I want to make continuing serial numbers in excel in order to print labels to be able to track my deliveries. i know i can drag the fill cursor to automatically make it go the next number. however i also want my serial number should represent the month and the day the invoice was printed.
for example i want the serial number should be
column a (Jan 01) column b (Jan 02 ) column c (Jan 03)
a1-01-01 a1-02-01 a1-03-01
a1-01-02 a1-02-02 a1-03-02
a1-01-03 a1-02-03 a1-03-02
The first number represents the month (example -a1 for Jan)
The second number represents the day and
The third number represents the invoice
How can i make that when i pul the cursor down it should continue with the invoice number
However when i continue right it should move the day number?
View 2 Replies
View Related
Feb 3, 2010
I have a list that I need to print. It is only 2 columns, but 12 pages long. I would like to print 4 or 6 pages, side by side on the same sheet. I tried changing the print setting to 4 pages per page. But, when I looked at the print preview, it showed only 1 page per page.
View 11 Replies
View Related
Jan 22, 2014
I'am trying to create a document which automatically prints the next page on the same sheet.
I have created a spread sheet which prints the first 5 rows in the top of every page, but I can't figure out how to make excel print two A4's on one A3 side-by-side.
View 2 Replies
View Related
Mar 28, 2007
I need to print 2 pages on one sheet. Page 1 on top, page 2 below. I can get this to work on Portrait, but I need it printed Landscaped.
View 9 Replies
View Related
Nov 20, 2006
simple example.
A1 = 155
I need to print 3 pages where B1 is equal to 50 and 1 page where B1 is equal to 5. A1 may change, but B1 will always be multiples of 50, plus whatever is left over.
View 9 Replies
View Related
Jun 19, 2014
Is there a way to tell a row in a pivot table to keep together when printing? Example if I have a row for Item and then a row for year after that, I want all the years for that item to print together on the same page.
Item1
2010
2011
2012
<page ends>
<second page>
2013
2014
Item2
2010
2011
2012
2013
2014
View 1 Replies
View Related
Jan 26, 2013
How you can print cells that have a large amount of text continuously on every page (like in an MS Word document)? I have cells that end up with a lot of text, but excel will push the next text heavy cell to the next page leaving you with a few inches of white space on the previous page. Is there a way to just continue the printing of one cell onto the next page to make all the pages even? It takes up extra paper and looks bad when printed...
View 3 Replies
View Related
Jun 28, 2014
I've got an excel sheet that has a series of successive numbers down the side from 1-15 per sheet. I've done this by putting the cell formulas as previous row +1. (these are being used as unique reference numbers)
I want to be able to print this out multiple copies of this in one instance without having to manually adjust the first number multiple times then print the sheet. I also want it to be automatically saved as the most recent page printed, so that when it's printed the number continues on from the previously printed sheet.
I found a macro online which I have adjusted to increase a cell by 15 each time it is printed (to change the first number of the row). But I've realised that I'm printing the final page twice if I run the macro again. Is there any way to get round this? If I print 1 sheet there is also no adjustment in numbers.
I also haven't got onto the save part.
This is the macro I am currently using:
"Sub PrintSequence()
'
' PrintSequence Macro
' Macro recorded (altered) 8/16/2005 by Roy Wagner
[Code].....
View 1 Replies
View Related
Jan 30, 2008
I have a sheet with a few hundred rows of data which I filter out by using a very simple autofilter. I have set page breaks throughout the whole sheet on certain rows I need to start on a new page. If the auto filter filters out any of these rows when it prints it prints a blank page where that row would have been before it was hidden by the autofilter.
For example the whole list is say 5 pages (set with page breaks) I apply an auto filter that now reduces it down to 2 pages say the 1st and last page of the original list. If I page break preview it, it shows me that it will be 2 pages but when i print preview/print the sheet it prints the 1st page then 3 blank pages then page 5 even know that the page break preview only shows and numbers 2 pages. Because the original page breaks are still there just are hidden by the autofilter so it adds them in as blank pages
View 4 Replies
View Related
Nov 12, 2012
I have a single page spreadsheet. I want to print multiple copies and have a unique invoice number on each page printed in cell O1. I don't want to just send it to the printer as individual print jobs. I would like to send it to print as a pdf in a single 100 page document or if not a pdf then just as a multiple page document.
For example first print run would start at number 1001 and last numbered page is 1101.
View 6 Replies
View Related
Apr 10, 2013
I am working on word documents that has financial numbers on them. I am copying word pages to excel to calculate the numbers by using formulas and etc. I will cut to the chase; is there a way or a macro to insert into an excel template workbook(.xltx) when we open the template there will be a command button to select the word document (which we want to copy its pages) to excel sheets. When a new page begins a new sheet will be created and the page will be pasted on the new sheet.
It is not important if it has to have a command button to select the word document it is ok to run the macro and select the word document and it does not has to populate sheets according to length of word document (I can create lost of free sheets on the template)
The main idea is to gain the time I spend on copying the word document to excel sheets. Some documents can be very long (100 pages). I am using MS Office 2007.
I triend to export data but excel does not allow me to select word documents.
View 5 Replies
View Related
Jan 11, 2013
I have one page in excel to print. But I want to print it 1000 times and on each paper i need another serial number. How do I do this?
View 4 Replies
View Related
Sep 23, 2009
If Then Else not continuing. What is wrong with
View 5 Replies
View Related
Jul 11, 2008
From cell A1 to A10 I have the figure 5412587
In cell B1 I want the figure in Cell A1 to concatenate with the figure one but in cell B2 instead of figure one with figure two etc. etc.
So B1 will be 54125871, B2 54125872, B3 54125873 etc. etc.
the formula would be Concatenate(A1&1). I want the "one" in this formula to be increasing so in B2 will be Concatenate(B1&2) et.c etc.
The problem is that I dont want to add an extra column to replace the 1, 2, 3 etc. in the formula.
View 9 Replies
View Related
Feb 20, 2009
I'm trying to execute a macro and it won't put the focus (radio button) to select x pages wide by x pages tall in the Page Setup/Page/Scaling Area. I looked at the macro and can't find a setting in the code but yet the focus won't change. What can I do about this? In other words the radio button stays selected as "adjust to "" % of normal size. Here's the code...
View 2 Replies
View Related
Jan 12, 2007
I have set up a form where the user can enter the number of copies they want for 10 items (I will call them item1, item2 etc for ease)
Is it possible to then link the numbers in the form to separate parts of a large printing Macro?
View 9 Replies
View Related
Jun 21, 2012
so on sheet 1 i have a list in column b (as below) and in column G I want to put a note "not included" if the cell matches what is in sheet 2:
AAA
BBB
CCC
DDD
EEE
On sheet 2, column A I have a list of items that I want to not include which I want to be able to add/remove/adjust over time. For example:
DDD
EEE
FFF
LLL
I can get it to put in the correct text into sheet 1 with the following but I don't know how to get it to look through all values on sheet 2 and then only enter the "not included" on sheet 1 if it is listed on sheet 2.
So far I have
Sub checksheet()
For Row = 1 To 428
For col = 2 To 256
[Code]....
This only does it for what is written in cell A3 on sheet 2 and does not keep going down the list in sheet 2.
I think I need to define the range better on sheet 2 and ask it to look through that, but im not too sure.
View 4 Replies
View Related
Feb 11, 2013
IF(A1=1400,(AVERAGE(A1:A2)),"")
Placed in column B.
This formula will do what I want, but 1400 may show up 5 times in 20,000 rows. You can change them to values and delete the blanks to move them up where you can see them.
1. That is more time.
2. This is living data changing all the time, so I need the formulas to remain.
Is there a formula that will place each event under the previous in the column B? The first event in B1, second B2, third B3, and etc.
View 9 Replies
View Related
Dec 1, 2009
Im looking to ensure the sheet contents are clear before continuing with the macro routine. At the moment however, the macro runs I see the data flash up and then off. So it appears the data is being cleared as soon as it loads. Current code is:
View 2 Replies
View Related
Mar 2, 2012
I'm trying to write some code that will check if specific files in a folder are present before continuing code.
I've looked on-line and found various code that checks if a single file is present whereas my requirement is slightly more demanding.
Some files might be present and others not. The code must check ALL necessary files are there then run main code. If even any single file from say 5 files is missing, code must exit.
I was thinking of using an array to store all files names and then use a "For Each XX In XX" to loop through the array and check each file is present?
This is what I have so far:
Sub XX()
Dim strPath As String, LinesDelete As String, Applepnfile As String, MpnStock As String
Dim myArray() As Variant, myElement As Variant
Dim myArray() As Variant, myElement As Variant
strPath = "Z:AppleApple Deliverys"
[Code] .........
View 5 Replies
View Related
Jun 11, 2013
Basically, in the "Thisworkbook" code , i have some code in the Workbook_BeforeClose section. Currently , it autosaves the workbook in a folder i have specified.
However, i need to add some code.I want to check that a certain cell has a value in it before the user closes the workbook, and if the cell is empty, show a messagebox asking him to enter a value.
I know how to get a messagebox to pop up, the only thing is once the user clicks the OK button,
i need the rest of the code execution to pause, allowing him to make the change then if he clicks the "X" (top right of the screen) to close the file or application, the filesave dialog appears and he can then save the document.
how to go about this because at the moment when user clicks ok, the messagebox just disappears and filesave dialog appears and he doesn't have a chance to edit the cell.
View 5 Replies
View Related
Jan 15, 2012
I would like to know if there is a way to print several different workbooks at once but keeping my printing format which I would like to be Landscape and Fit to one page. Reason is simple as I work in a office where staff is handed in several jobs to do everyday. They finish the jobs and log all the info on the database. I log on to database and put all their daily diaries and because it is all over the place I have to go in each file and set printing preferences which takes an hour in the morning and hour in the evening. I could do with some sort of automation where all diaries are automatically printed in Landscape and Fit on one page.
View 2 Replies
View Related
Apr 11, 2008
I have a report that is generated from a manufacturing process that looks like the example below. the report is 40 pages long when all the data is printed. i am looking for a way to only print this range if a dimension is "out of tolerance". if the dimension is within tolerance, there is always the "garbage" text of plus and minus. if every row is "within tolerance" in the range the cells in the OutTol column would all contain the "garbage" text but it will not always be identical. so, in summary, actual OutTol values = print and all "garbage" = not printed.
NomActDevLoTolUpTolOutTol
Y-0.956-0.9480.008-0.0030.0030.005
Z-1.413-1.4130.000-0.0030.003---*|++++
DIA0.4220.4240.002-0.0030.006----|+*++
POS0.0160.0110.005
View 9 Replies
View Related
Oct 30, 2008
I have a website with lots of pages and I have a tool where I can see how many visits these pages get. What I want is to find out which pages didn't get any visits.
So I have in one column all the pages URL's on my site
In the other column I have all the pages URL's that have been visited, and in the column right next to it I have the amount of visits that page has received.
For example, this is what it looks like today:
column A:
row 1: /site/hello.htm
row 2: /site/how.htm
row 3: /site/are.htm
row 4: /site/you.htm
column B:
row 1: /site/are.htm
row 2: /site/hello.htm
column C:
row 1: 10
row 2: 20
Ideally the URL's that have been visited should show up on the same row as the URL in column A, and then for the ones that have not been viewed it will just be blank in column B and C.
so in the above case it would look something like this:
column A:
row 1: /site/hello.htm
row 2: /site/how.htm
row 3: /site/are.htm
row 4: /site/you.htm
column B:
row 1: /site/hello.htm
row 2: [blank]
row 3: /site/are.htm
row 4: [blank]
column C:
row 1: 20
row 2: [blank]
row 3: 10
row 4: [blank]
View 13 Replies
View Related
Aug 20, 2014
I am trying to create a PDF of every 2 Worksheets. I currently have this code that creates my PDFs for each individual sheet but I need it to group 2 together. Ex: Sheets 1 & 2 a separate PDF, Sheets 3 & 4 a separate PDF and so on.
[Code] ......
View 5 Replies
View Related
Nov 7, 2007
Is there a way to insert a cell/row, and add data to one page/tab, and have it automatically insert a cell/row and add the data on another page/tab?
Excel 2003 is the version I am using.
View 14 Replies
View Related
Nov 25, 2008
I opened an Excel file, and the whole page is grey. I can't see the cell lines at all. How do I get it back to white with all my gridlines?
View 3 Replies
View Related
