If Statement Continuing Through Range?
Jun 21, 2012
so on sheet 1 i have a list in column b (as below) and in column G I want to put a note "not included" if the cell matches what is in sheet 2:
AAA
BBB
CCC
DDD
EEE
On sheet 2, column A I have a list of items that I want to not include which I want to be able to add/remove/adjust over time. For example:
DDD
EEE
FFF
LLL
I can get it to put in the correct text into sheet 1 with the following but I don't know how to get it to look through all values on sheet 2 and then only enter the "not included" on sheet 1 if it is listed on sheet 2.
So far I have
Sub checksheet()
For Row = 1 To 428
For col = 2 To 256
[Code]....
This only does it for what is written in cell A3 on sheet 2 and does not keep going down the list in sheet 2.
I think I need to define the range better on sheet 2 and ask it to look through that, but im not too sure.
View 4 Replies
ADVERTISEMENT
Sep 23, 2009
If Then Else not continuing. What is wrong with
View 5 Replies
View Related
Jul 11, 2008
From cell A1 to A10 I have the figure 5412587
In cell B1 I want the figure in Cell A1 to concatenate with the figure one but in cell B2 instead of figure one with figure two etc. etc.
So B1 will be 54125871, B2 54125872, B3 54125873 etc. etc.
the formula would be Concatenate(A1&1). I want the "one" in this formula to be increasing so in B2 will be Concatenate(B1&2) et.c etc.
The problem is that I dont want to add an extra column to replace the 1, 2, 3 etc. in the formula.
View 9 Replies
View Related
Jan 16, 2010
I have an Excel 2007 Workbook that is used to do a variety of different reports. Each spreadsheet within this Workbook is a different report. All reports need the same Header format that is linked with new data that is entered with each new report. The reason I need a header is because each report may vary in size from 1 page to 6 pages, it all depends on how much is reported on and a single completed report will use a combination of other reports.
Here below is a format that I am trying to achieve
(Linked Data) ‘Employee names located top center
Date: (Linked Data) ‘With Date: texted before link, located left index
Address: (Linked Data) ‘With Address: texted before link, located left index
Or should I just use
=Sheet1!A1:C1
On Sheet1 as source to other sheets, but if I do this how do I use this like a header for continuing pages
View 2 Replies
View Related
Feb 11, 2013
IF(A1=1400,(AVERAGE(A1:A2)),"")
Placed in column B.
This formula will do what I want, but 1400 may show up 5 times in 20,000 rows. You can change them to values and delete the blanks to move them up where you can see them.
1. That is more time.
2. This is living data changing all the time, so I need the formulas to remain.
Is there a formula that will place each event under the previous in the column B? The first event in B1, second B2, third B3, and etc.
View 9 Replies
View Related
Jan 14, 2009
I have a layout for printing as attached. This is a front carton label. Depends on the carton qty, I need to print many times of those pages whether changing the carton times before every print out. For instance I print from 1 to 550. Each time I modify the carton numbers and printing it, that means 250 print job! I want Excel prints all(between) pages with given first and last carton numbers , is there a way to do it?
View 4 Replies
View Related
Dec 1, 2009
Im looking to ensure the sheet contents are clear before continuing with the macro routine. At the moment however, the macro runs I see the data flash up and then off. So it appears the data is being cleared as soon as it loads. Current code is:
View 2 Replies
View Related
Mar 2, 2012
I'm trying to write some code that will check if specific files in a folder are present before continuing code.
I've looked on-line and found various code that checks if a single file is present whereas my requirement is slightly more demanding.
Some files might be present and others not. The code must check ALL necessary files are there then run main code. If even any single file from say 5 files is missing, code must exit.
I was thinking of using an array to store all files names and then use a "For Each XX In XX" to loop through the array and check each file is present?
This is what I have so far:
Sub XX()
Dim strPath As String, LinesDelete As String, Applepnfile As String, MpnStock As String
Dim myArray() As Variant, myElement As Variant
Dim myArray() As Variant, myElement As Variant
strPath = "Z:AppleApple Deliverys"
[Code] .........
View 5 Replies
View Related
Dec 10, 2012
I want to make continuing serial numbers in excel in order to print labels to be able to track my deliveries. i know i can drag the fill cursor to automatically make it go the next number. however i also want my serial number should represent the month and the day the invoice was printed.
for example i want the serial number should be
column a (Jan 01) column b (Jan 02 ) column c (Jan 03)
a1-01-01 a1-02-01 a1-03-01
a1-01-02 a1-02-02 a1-03-02
a1-01-03 a1-02-03 a1-03-02
The first number represents the month (example -a1 for Jan)
The second number represents the day and
The third number represents the invoice
How can i make that when i pul the cursor down it should continue with the invoice number
However when i continue right it should move the day number?
View 2 Replies
View Related
Jun 11, 2013
Basically, in the "Thisworkbook" code , i have some code in the Workbook_BeforeClose section. Currently , it autosaves the workbook in a folder i have specified.
However, i need to add some code.I want to check that a certain cell has a value in it before the user closes the workbook, and if the cell is empty, show a messagebox asking him to enter a value.
I know how to get a messagebox to pop up, the only thing is once the user clicks the OK button,
i need the rest of the code execution to pause, allowing him to make the change then if he clicks the "X" (top right of the screen) to close the file or application, the filesave dialog appears and he can then save the document.
how to go about this because at the moment when user clicks ok, the messagebox just disappears and filesave dialog appears and he doesn't have a chance to edit the cell.
View 5 Replies
View Related
Jan 13, 2007
This is hard for me to articulate, so hopefully someone will understand what I'm trying to do.
I'm attempting to construct a formula in Excel, that basically says: IF the value is between these two numbers, multiple them by this percentage, or if the value is between these numbers, multiple it by this percentage.
So, let's say cell A3 equals 10,000,000, A2 equals 5,000,000 and A1 equals 1,000,000... Also cell B3 equals 10% and B2 equals 5%. We'll say that number X is in cell C1. If the number X is between 10,000,000 & 5,000,000 it should by multiplied by 10%. If number X is between 5,000,000 and 1,000,000 it should be multiplied by 5%.
I've tried a formula similar to: IF(C1 (Rng(A3:A2), C1*B3) ---- Meaning that if the number is between 10,000,000 and 5,000,000, multiple the number by 10%.
View 12 Replies
View Related
Aug 8, 2013
I am trying to loop through a range, checking for a cell to contain one of two characters and then put a value in a cell to the side (well 3 away) of it. Im getting an error for Type mismatch on line:
VB:
If CellContent = "h" Or "v" Then
the data in the cell is an along the lines of '12.34.56.43 som-thi-vh-ng1'
VB:
Dim MyRange, MyCell As Range
Dim CellContent As String
Sheets("Sheet1").Activate
[Code]....
View 1 Replies
View Related
Jul 23, 2009
I am trying to do a calculation based on the conditions of two cells but one cell I would need the range of the report. Either way, here is my current statement.
=IF(P2:P15 = "Green Building 15",SUM(COUNTIF(C2:C15,"Over AC")+COUNTIF(C2:C15,"Top Lab AC")),0)
I get a Value# error (though it systematicaly works if you check in the funtion area), and its because of the range I am using, is there anyway to bypass thiss issue or can someone give a better calculation.
View 4 Replies
View Related
Aug 28, 2009
I have tried over and over to get a point value from the percentages posted below but my formula will not return consistent results. Am I doing something wrong.
94% - below 1 Point
95%-96% 2 Points
97% 3 points
98%-99% 4 Points
0% or 100% 5 Points
Reference Cell is AG2 and is .99 but for some reason I return a 5
=IF(AG2=0,5,IF(AND(AG2>0,AG2<=0.94),1,IF(AND(AG2>=0.95,AG2<=0.96),2,IF(AG2=0.97,3,IF(AND(AG2>=0.98,A G2<=0.99),4,5)))))
View 6 Replies
View Related
Apr 7, 2009
I dont know how to nest and if (if that is the right way to go about it). this is what I have ....
View 10 Replies
View Related
May 2, 2012
Need all numbers in between the ranges set. So if I input for example 8765 then the cell still comes up with 18.
IF Cell E25 is 0-7200, then 12, If cell E25 is 7201-14400,
then 18, if cell E25 is 14401 - 21600, then 22,
if cell E25 is 21601-28800, then 28, if cell E25 is 28801 - 36000, then 34.
View 4 Replies
View Related
Aug 9, 2007
I was making a simple spreadsheet as I'm taking practice tests for some IT certifications and the spreadsheet I was making was to chart out my progress.
I had a range of scores in some cells and one of the formulas I used so that I didnt have errors in the sheet like div/0 went like the following:
=if(b5:b50="","",sum(b5:b50)) this seemed to work really well for the one section, however I tried to get a little fancy as always and I think I messed something up. Beneath that I tried to separate each practice test with the same sort of formula resulting something like the following:
=if(b30:b40="","",sum(b30:b40)) this however just returned an error #value. I dont understand why the first formula worked and the second didnt. Then again, I'm not really an excel guru, back in college I was really good with it but I dont really remember much.
View 9 Replies
View Related
Aug 10, 2007
I'm trying to create an if statement that have 2 criterias. Here's what I've created:
=IF(COUNT(F2:F4)=('2007Open'!H2:H4),COUNT('2007Open'!B2:B4)=8,'2007Open'!H2:H4)
This statement is returning the #VALUE error.
I guess what I'm trying to do with this statement is to count how many values are not equal to 2007Open!H2:H4 and meets another criteria of 8.
View 9 Replies
View Related
May 19, 2009
I'm trying to create an IF formula that returns the month as text between a certain date range in a different column.
For example
Between the 25-APR-09 and 23-MAY-09 I want to display "May" 24-MAY-09 and 27-JUNE-09 "June"
And so on so forth, the column with the dates in it is in date format.
View 9 Replies
View Related
Mar 21, 2007
I need a formula that will return "true" only if ALL cells in the specified range are not Null (<>""). I'd like to assign a value (% complete) only after all tasks under a phase have been given a completion date.
View 7 Replies
View Related
Jun 11, 2014
I have a sheet with thousands of rows and 45 columns and I need to delete a range of cells (G:Y) if the cell in column V = the cell in column X, and I need to do this by row. I think an if/then statement would work.
View 4 Replies
View Related
Jan 8, 2014
I'm after a formula that will look at a number of cells(that are not in a range) with the word "C" and if they all = "C" then I want the cell to come back with the result "yes" otherwise "no".
View 12 Replies
View Related
Dec 4, 2009
If C36, C37, C38 or C39 contain a 0 then put 0 if not continue with the the formulae
I have this but I know its not right as this is a sum: =IF(C36:C39=0,0,ROUNDUP((C36/C37)+(C38/C39),0)).
View 4 Replies
View Related
Mar 24, 2005
I've created an IF statement with multiple formulas, but I can't seem to
figure out if it is possible to pull the information by a specific date
range. I have sales reps that visit customers on specific dates and I need
my tally sheet to only pull dates within that current week. Does anyone know
if this is possible??
This is what I have so far:
=SUM(IF(sales rep!AB2:AB216=I3,IF(sales rep!$AA$2:$AA$216=I4,IF(sales
rep!P2:P216=I7,IF(sales rep!$N$2:$N$216>=DATEVALUE("3/18/2005"),1,0)))))
If you look above I have it to calculate the date value starting at
03-18-05, but I would like it to only pull that date through the next week.
View 9 Replies
View Related
Feb 17, 2012
I am trying to build a macro that test for the value of each cell of a range (in a column), and if found, then the value of the cell of the same row (another column) will be set to 1. If not, then the macro writes a formula to get some data from BBG (this part is ok). this is what I have done so far but I have an error message, telling me "Not Else with out if" .
Code:
Sub Fx()
With Worksheets("DivRelease")
Dim LastLig As Long
[Code].....
View 9 Replies
View Related
Nov 24, 2012
I am trying to use cell C6 in my control sheet
Which is this
C:UsersNeilWin7DBTradingETFfiles
And put as a string into SaveAs
wbNew.SaveAs Filename:=Worksheets("Control Sheet").Range("C6") & TickerIndex & "ProSharesNAVRatio" & ".txt", FileFormat:=xlTextWindows
View 3 Replies
View Related
Mar 19, 2014
I'm trying to put together a SumIfs formula to find the total count of procedure codes during a certain time period, for a given market.
I have the Market column, Procedure Code column, Date column, and count of Procedure Codes column.
The range of Procedure Codes I want to total on are in cells C4:F4 and they are:
99307993089930999310
It's fairly straightforward with the dates in the SumIfs as well as markets, but I'm not able to get the range of Procedure codes to work like I want. These 4 codes are just the criteria that will use to pull the totals from, which comes from a much larger dataset.
View 1 Replies
View Related
Nov 22, 2006
I need a script that will search through a selected range of cells and add a simple IF statement.
For simplicity, lets assume the desired range is Q36:Q40. (The range is much larger than that.)
The existing formula is:=IF($Z37="%Sales",Q$9*$Y37,IF($Z37="%BS",Q$78*$Y37,IF($Z37="%YOY",O37*(1+$Y37))))
I would like to keep all existing forumulas, just tack on an IF statement before hand that says if a certain cell (Q2) reads "CoPrep" then do nothing, otherwise use the existing formula. I envision this as =IF(Q2="CoPrep","",IF($Z37="%Sales",Q$9*$Y37,IF($Z37="%BS",Q$78*$Y37,IF($Z37="%YOY",O37*(1+$Y37)))))
FYI, the background to this problem is that I am in the process of making a financial forecasting model that allows for choices of company prepared forecasts, hence "CoPrep", or model forecasts based off of other critera, both of which can be sensitized.
View 9 Replies
View Related
Jun 22, 2014
I want to search the selected range for a variable value (calculated previously in the sub) and if it finds the value I want the sub to do some things. If it's not in the range I want it do something else.
Here is the relevant section for what I have:
[Code] ......
This works and cuts the value I'm looking for if it finds a value in the range. The problem is it's not in the range I don't know how to tell it to follow other instructions. I tried the "iserror" with an in statement, but it said the range was not set. Intellisense isn't working and I don't really know how to use the .find method ...
View 3 Replies
View Related
Aug 27, 2008
I have a Userform which has 2 textboxes. User enter his employee id on textbox1 then enters a valid break time code which are 1,2 and 3 on textbox2. If User typed 1 then first breaktime start time will be pasted on the worksheet. When User returns after break he then enters his employee id again and then type 1 to end his first breaktime, the end time will be pasted on the worksheet. My program works fine however, I am trying to place a code which will prompt the user to end his first break time before entering another valid break code. Kindly check my code below as I am receiving an error message. 'Run-time error 9' Subscript out of range. This thing is driving me nuts. Any advise or can you tweak my coding vba experts.
View 14 Replies
View Related
