If Statement Using Left And Right Conditions
Feb 16, 2010I'm tring to put data in empty cells using an formula. =IF((LEFT(A4,5)),"Class",(RIGHT(A4,5)))
View 3 Replies
ADVERTISEMENT
Multiple Conditions Within An IF-THEN Statement
Jan 13, 2009I have the following formula entered into cell O4: =IF((AND($K4="1",$B4="1 - C",$I4="open")),(1),(0)). When the three conditions are met in the corresponding cells, I get a "0" returned in cell O4. I would like the formula to return a "1" when all three conditions are met.
View 2 Replies View RelatedIF Statement With List And Conditions
Oct 5, 2009I am trying to create an IF statement that will double the unit value of a certain box (J15) if the number of I15 is less than or equal to 160 AND either "A,B,C, or D" is selected from a list in H15. If it does not qualify with both, it would just be the single value of J15, not doubled.
So far I can only get it to work with one item from the list in the IF statement:
=IF(AND(H15="A",I15<=160),J15*2,J15)
However, I don't know how to add in the other list options B-D and get it to work.
Basically I need these four statements combined into one:
=IF(AND(H15="A",I15<=160),J15*2,J15)
=IF(AND(H15="B",I15<=160),J15*2,J15)
=IF(AND(H15="C",I15<=160),J15*2,J15)
=IF(AND(H15="D",I15<=160),J15*2,J15)
How To Insert More Conditions In If-statement
Feb 28, 2014I am working on a search and replace macro. It's purpose is that within a region that varies only in row size, it's suppose to compare two values, A and B. A is only placed in one cell in the region, while B is a one column range in the region.
If A <> B, A should replace all B's in the region.
These regions are placed on top of each other in a long table. Please see the sample workbook, SampleDRW.xlsm
The code I am using is this:
[Code] ......
The problem is if the B value in the next region is the same as the one before but the A value change, my code don't pick up on it, because it only looks for changing B!
How can I expand the code to also pick up on this problem?
IF Statement With Conditions: Start From Row 21
Jan 5, 2010In the table I've created, I have a column (column A) that contains "Y" for the first 20 rows. I'd like to use an if statement in another column (column B) to create a numbered list starting with the first row (from column A) that is blank. For example, if column A contains "Y" in the first 20 rows, I'd like starting in row 21 (in column B) to return a value of "1" and then have the subsequent rows increase in value by 1, so row 22 would be "2", row 23 would be "3" etc. The catch is, if for some reason I make a change in column, let's say extend the "Y"s down to row 25, I'd like column B to reflect those changes by starting the list in row 26.
View 3 Replies View RelatedTwo Conditions Not Talking To Each Other In IF Statement
Jul 17, 2012Formula I've been labouring over which is only bringing back partial results - I don't normally have much call in my role to build nested formulas...
The following is what I have so far:
=IF(AND(AQ2="MortgageSession",OR(J2="LeedsCounselling",J2="Glasgow",J2="Limavady")),
"Mortgage",IF(AND(AQ2="SelfEmployedSession",J2="LeedsCounselling"),"Mortgage","Other"))
The formula is made up of two conditions:
1.
IF AQ is 'MortgageSession'
AND
J2 is 'LeedsCounselling'
OR Glasgow
OR Limavady
I want the cell to return 'Mortgage'
2.
IF AQ is 'SelfEmployedSession'
AND
J2 is 'LeedsCounselling'
I want the cell to also return 'Mortgage'
Everything else 'Other'
I've managed to get the formula to work to a point where it will happily bring something back without error boxes, however it is only bringing back the second condition and ignoring the first - something to do with the join in between these?
Include Two Conditions Into IF Statement
Jan 17, 2007I am trying to include two conditions into this IF statement.
=IF(ISBLANK('SHEET1'!W8),0,1)
I want to include the cell X8 in this aswell.
Switch Off Conditions In And Statement
Jan 15, 2010I have multiple anded conditions both Boolean and numerical. For testing purposes, I wanted to be able to switch off individual numerical conditions in the If statement. It seemed like an easy matter that I could simply comment out the And statement of choice and recompile. When I tried this, I received a compile error.
Another option would be to use individual togglebuttons to selectively turn off the 5 numerical comparisons. I have no idea how to set that up.
how to do this with either commenting or togglebuttons?
The If statement
If OptionButton4.Value = True _
And ToggleButton1.Value = True _
And Range("G3").Value >= Range("N6").Value _
And Range("AV22").Value >= Range("AU22").Value _
And Range("E3").Value = "Long" _
And Range("G3").Value Range("BG7").Value _
And Range("H4").Value >= Range("L4").Value _
And TradeFound = False And _
DeletedFound = False Then
If Statement With Multiple Conditions
May 2, 2006Dim b As Long
Dim last_rowB As Long
last_rowB = Range("K65536").End(xlUp).Row
For b = last_rowB To 2 Step -1
If Sheets("Main").Cells(b, 11).Value = Sheets("Main").Cells(b + 1, 11).Value & Sheets("Main").Cells(b, 11).Value <> "" Then
Sheets("Main").Cells(b + 1, 11).EntireRow.Delete
End If
Next b
If 2 cells are the same i want to delete the row of the 2nd cell, this works. But i dont want 2 delete cells that are blank, this doesnt work. For some reason it deletes everything in the table.
IF Statement (counters In It To Start When The Conditions Is Met)
Jul 7, 2009I have a series of IF statements in a formula. I need one of the counters in it to start when the conditions is met.
i.e. the false section in an IF is along the lines of $B$3+J2, and then it continues down the column $B$3+J3 then $B$3+J4 etc. I need the J# to start increasing when the condition within the IF statement is met, not from the very beginning. When I get to, let's say the 13th row, when the condition is met, I want J2, not J13or14.
Adding Additional Conditions To IF Statement
Dec 29, 2011I need to add a condition to a statement that adds a "If TRUE" reference to another cell.
The other cell can be either a TEXT value "RM1" OR "TE2". If neither condition is true than the value is blank or zero.
So right now I have in the destination cell =IF(AB7="CONT",V7,"") That works lovely, but really isn't countable unless cell "Z7" ALSO has Either "RM1" OR "TE2".
If cell "Z7" has the text "DEA" or "SP" then the value of "V7" will be placed in a different column. I will use a different destination column (for this modified "DEA" or "SP" condition)
Multi-Conditional IF Statement With Too Many Conditions?
Oct 21, 2013So, Excel reads my formula. It tells me it's correct, but it has too many statements. [I know this is true, because the equation is absolutely huge. )
The thing is, I need it to tell me, based on two separate columns - one being "State" and the other being "A vs. O", who this contact belongs to. [For each state, there is a different person for A and for O, and the entire spreadsheet is text.]
My ridiculously large, almost functional function is:
=IF(AND(RC[9]="WA",RC[13]="APP"),"Kyle Johnson"),IF(AND(RC[9]="WA",RC[13]="OPP"),"Tom Wieske"),IF(AND(RC[9]="MT",RC[13]="APP"),"Kyle Johnson"),IF(AND(RC[9]="MT",RC[13]="OPP"),"Tom Wieske"),IF(AND(RC[9]="ID",RC[13]="APP"),"Kyle Johnson"),IF(AND(RC[9]="ID",RC[13]="OPP"),"Tom Wieske"),IF(AND(RC[9]="OR",RC[13]="APP"),"Kyle Johnson"),IF(AND(RC[9]="OR",RC[13]="OPP"),"Tom Wieske"),IF(AND(RC[9]="CA",RC[13]="APP"),"Tom Wieske"),IF(AND(RC[9]="CA",RC[13]="OPP"),"Tony
[Code] ....
As you can clearly see, there are a lot of terms, but I need both the "State" and the "A vs. O" column to determine the outcome of the column the formula will be in.
If Statement (sort Data Similar To Below Using The Following Conditions)
Oct 26, 2008I need to sort data similar to below using the following conditions. If the total of A's is greater than 4 they get an A. If the total of E's is greater than 4 they get an E. If they have more A's than E's, assuming they have at least 4 of each then they get an A. If the total is 5, but they don't have 4 A's then they get an E
NAME E'sA'sTOTAL
John 235 ( so this one should get E)
Mary 459 ( This one should get A)
Tim 112 (This one shouldn't get anything)
Jane 145 ( This one should have an A)
Sam 415 (This one should have an E)
I would like this to sort in one cell - I can do this over 5 cells - but not in one.
Multiple If Statement: Value Returned In Cell C3 If Two Conditions Are Met
Aug 27, 2009I am trying to have a value returned in cell C3 if two conditions are met. In Cell C3 (Sheet 1), if the value in Cell A3 (Sheet 1) is listed in column A on sheet 2, and the 12031 is listed in column B on sheet 2, I need the value of Open to be returned.
View 3 Replies View RelatedMultiple Conditions For If Statement For Past And Future Dates
Feb 14, 2014I need creating a formula that combines the following if statements in cell C107:
=IF(AND(B107
If Statement (2 Conditions): Cardboard Manufacturing Plant In The Q.A Department
Jan 29, 2007I work at a cardboard manufacturing plant in the Q.A Department. Occasionally paper claims need to be raised due to the paper being faulty (out of spec.). I have attached a spreadsheet which at present works out the paper cost according to which paper grade is typed into a particular columb. But, paper price varies according to the width (i.e. Deckle) of the paper as well. And this is the variable which I have not been able to implement thus far.
The relevant columbs are 'D', 'E' & 'I' for the purposes of this formula... It should be noted that below this I have pasted in the paper pricing list... and that in general each paper grade has 3 different prices depending on the Deckle (i.e. paper width), so there are 3 possible prices which can be displayed depending on the Deckle inputted into columb 'E'.
IF Statement Does Not Produce Required Results: Resulting In Zero Values In Most Conditions
May 25, 2009I have a work sheet which includes a column of numbers representing certain daily events. I am building a user defined function to analyse the trend in the numbers by assisigning values from -2, -1, 0, 1, 2 based on comparison of two days.
Below is the function I built but it is not working, it is resulting in zero values in most conditions. I have attached the sheet which includes the numbers and the function.
Excel 2010 :: Shifting Cells Left And Then Up If Left Cell Is Blank?
May 8, 2014I have a 2010 excel sheet containing 14 columns and 45082 rows in total. I am quite illiterate when it comes to writing macros but I know that what I need can be achieved with a set of codes.
To be more clear, I inserted two tables below. The first one represents the current data structure, and the second one is the way I want my data to look like.
Current data structure looks like
Variable 1
Variable 2
Variable 3
[Code].....
Autofill Formula To The Left (fill To The Left)
Feb 5, 2009I am having trouble filling a formulae series to the left on one spreadsheet, the fomulae being references to another sheet.
For example, I have two sheets 'Mtce Options' and 'Base Case'. In 'Mtce Options' I have the following formulae
A B C
1='Base Case'!A15='Base Case'!D15='Base Case'!G15
I want to fill to the left, incrementing the column references by a factor of 2 each time, eg. next two should be ='Base Case'!J15 and ='Base Case'!M15.
However, if I autofill to the left by highlighting A1, B1 and C1 or just B1 and C1 all I get is an inappropriate reference such as ='Base Case'!D15 or ='Base Case'!F15, respectively, in D15.
Find/Left Functions: Grab Everything Left Of The Last Occurrence Of "." In A String
Nov 19, 2009I want to grab everything left of the last occurrence of "." in a string, and in the next cell everything right of the last occurrence of "."
so say the string is 111.111.1.222
column 1
111.111.1
column 2
222
my current code (which works, but its messy) for the first cell is
Test X Conditions In Conditional Formatting: Highlight Cells Is Two Conditions Are Met
Oct 17, 2007I would like to highlight cells is two conditions are met:Cell = 0Offset(0,-1)>0I tried the conditional format wizard and entered a formula: =IF(AND($J2=0,$I2>0)) But I keep receiving formual errors, which I understand, because it appears to be incomplete formula. But I am not sure what else I need to add to the formula in the conditional format wizard
View 2 Replies View RelatedUtilize A Select Case Statement In Target Intersect Statement
Jul 28, 2009I am currently using an Intersect statement in a worksheet module to perform two things:
1. Insert a time stamp into row 2 when row 1 has a price inserted
2.To clear that time stamp if the price is deleted at some later date.
My problem is with the time stamp value being deleted by the user.
If I try to clear the price (now that the time cell =empty) I get a Runtime error 91 - Object Variable or With block variable not set.
I would like to convert this code to a select case statement but I'm not sure how to do this in this situation. Would error coding be appropriate in this instance?
How To Validate If Left Cell Value And Left Cell Above Value Are Not Same
Sep 16, 2013I have a column that is giving unwanted value . dont know the reason as that excel file has been created by some other guy and I just started working on it .
My Question is how to move to 2 cells left(A for example) from from that unwanted value column. and check if
A is equal to cell above it , means B Cell(Row above A but same column).
As my excel file is totally based on Forms, Macros, I am not quite familiar with macros.
Is there any way to put if condition in one cell (column) and drag it all the way down which should work for all the values in these 3 column.
And also if A=B then I want to make that unwanted value cell="".
If Statement Within If Statement (recognize The Cell)
Oct 1, 2008I'm trying to set up an if statement that will recognize that if a cell is FHR it will do something...but if it's PHR it will do something else. I think I found the place where I keep getting an error but I'm not sure how to go about fixing the issue.
View 2 Replies View RelatedExcel 2010 :: Use One Set Statement To Set Second Statement?
Feb 14, 2012I am attempting to use a previously Set variable as part of the next Set statement, pretty unsuccessfully at present.
My purpose is trying to look up
Code:
tb_SelJobID.Value
from a userform in Col Z then look across the row to Cols D,I,N,S & W (different types of work) to see if
Code:
TbSelYr.Value
matches the year selected then insert a formula in the row to the left. Then loop down to the FinalRow.
Currently my Set Found1 statement does not recognise my Found10 value. I know it will be my syntax as it always is. I have cut down the following code to display where the problem areas are, Found1 thru 5.
Code:
Sub CmdGo3_Click()
Dim Row As Range
Dim FinalRow As Long
Dim Found1, Found2, Found3, Found4, Found5, Found10 As Range
Application.ScreenUpdating = False
[code]....
Windows 7 with Excel 2010
ADODB SQL Statement ORDER BY Statement
May 5, 2014I have an Excel Sheet which I use as Database. The database has 11 columns and I insert data with the following function:
Code:
Sub testInsert()
Dim adoCommand As New ADODB.Command
Dim sQuery As String
Dim i As Integer
Dim strTest As String
strTest = "test"
[Code] .......
Now I want to retrieve this data. i.e. I want all F1 where F2 and F3 are 0 AND I want them ordered descending. I'm trying to achieve this with:
Code:
Sub testSelect()
Dim adoCommand As New ADODB.Command
Dim sQuery As String
Dim mrs As New ADODB.Recordset
Dim strTest As String
strTest = "test"
[Code] ....
The result I am getting looks like this:
9
8
7
6
5
4
3
2
15
14
13
12
11
10
1
I assume, that the data is interpreted as String instead of an integer. But I explicitely stated the data as Integer when storing the data into the DB.
Switch Statement Is Too Long For VBA. To Make The Switch Statement Work Over Two Lines
Jan 6, 2009I have created a very long switch statement, which is too long to be placed in one row in VBA. I have attempted to put a space and underscore at the end of one line and continue the statement on the row below by placing a comma at the start of the second line. VBA will accept my efforts, but when I run the statement in the immediate window, the following error appears.
"Invalid procedure call or argument"
I understand that there are certain rules where I can split a switch statement onto two lines, yet I do not know what they may be.
IF Statement - Minus One Statement From The Other?
Mar 18, 2014I am looking to have one formula containing two If Statements that minus.
=IF(B6="investment",C6,0)-IF(B7="gross",C6,0)
So the result of If Statement 1 minus the result of If Statement 2.
What I am seeing at the moment in the cell is FALSE and what I want to see is the sum.
If-statement Inside An If-statement
Jun 13, 2009If A1 shows 10:00am and A2 shows 4:00pm, then A3 calculates the total number of hours: =(A2-A1)*24
But if A1 shows "Off," then A3 shows 0: =IF(A1="Off",0,(A2-A1)*24)
Now, if I want to change "(A2-A1)*24" to another if-statement, how do I do this? I can always set up a hidden cell (A4) that contains the results of the first if-statement, and then say: =IF(A1="Off",0,A4). But can I do this without going through all the trouble of setting up hidden cells?
IF Statement, MAX Statement, And Return A Value
Apr 25, 2007Each row represents a call. If a call in column A equals "CW" and it has the highest duration (H:MM:SS) value in column B, then provide me the date (MM/DD/YYYY) for that call that is stated in column C.
i.e.
Column A --- Column B ---- Column C
AB ------------ 0:02:22 ----- 04/14/2007
CW ----------- 0:03:13 ----- 04/16/2007
CW ----------- 0:01:42 ----- 04/13/2007
Thus, the value that should be returned is "04/16/2007".