I am working on a search and replace macro. It's purpose is that within a region that varies only in row size, it's suppose to compare two values, A and B. A is only placed in one cell in the region, while B is a one column range in the region.
If A <> B, A should replace all B's in the region.
These regions are placed on top of each other in a long table. Please see the sample workbook, SampleDRW.xlsm
The code I am using is this:
[Code] ......
The problem is if the B value in the next region is the same as the one before but the A value change, my code don't pick up on it, because it only looks for changing B!
How can I expand the code to also pick up on this problem?
I have the following formula entered into cell O4: =IF((AND($K4="1",$B4="1 - C",$I4="open")),(1),(0)). When the three conditions are met in the corresponding cells, I get a "0" returned in cell O4. I would like the formula to return a "1" when all three conditions are met.
I am trying to create an IF statement that will double the unit value of a certain box (J15) if the number of I15 is less than or equal to 160 AND either "A,B,C, or D" is selected from a list in H15. If it does not qualify with both, it would just be the single value of J15, not doubled.
So far I can only get it to work with one item from the list in the IF statement:
=IF(AND(H15="A",I15<=160),J15*2,J15)
However, I don't know how to add in the other list options B-D and get it to work.
Basically I need these four statements combined into one:
In the table I've created, I have a column (column A) that contains "Y" for the first 20 rows. I'd like to use an if statement in another column (column B) to create a numbered list starting with the first row (from column A) that is blank. For example, if column A contains "Y" in the first 20 rows, I'd like starting in row 21 (in column B) to return a value of "1" and then have the subsequent rows increase in value by 1, so row 22 would be "2", row 23 would be "3" etc. The catch is, if for some reason I make a change in column, let's say extend the "Y"s down to row 25, I'd like column B to reflect those changes by starting the list in row 26.
1. IF AQ is 'MortgageSession' AND J2 is 'LeedsCounselling' OR Glasgow OR Limavady
I want the cell to return 'Mortgage'
2. IF AQ is 'SelfEmployedSession' AND J2 is 'LeedsCounselling'
I want the cell to also return 'Mortgage'
Everything else 'Other'
I've managed to get the formula to work to a point where it will happily bring something back without error boxes, however it is only bringing back the second condition and ignoring the first - something to do with the join in between these?
I have multiple anded conditions both Boolean and numerical. For testing purposes, I wanted to be able to switch off individual numerical conditions in the If statement. It seemed like an easy matter that I could simply comment out the And statement of choice and recompile. When I tried this, I received a compile error.
Another option would be to use individual togglebuttons to selectively turn off the 5 numerical comparisons. I have no idea how to set that up.
how to do this with either commenting or togglebuttons?
The If statement If OptionButton4.Value = True _ And ToggleButton1.Value = True _ And Range("G3").Value >= Range("N6").Value _ And Range("AV22").Value >= Range("AU22").Value _ And Range("E3").Value = "Long" _ And Range("G3").Value Range("BG7").Value _ And Range("H4").Value >= Range("L4").Value _ And TradeFound = False And _ DeletedFound = False Then
Dim b As Long Dim last_rowB As Long last_rowB = Range("K65536").End(xlUp).Row For b = last_rowB To 2 Step -1 If Sheets("Main").Cells(b, 11).Value = Sheets("Main").Cells(b + 1, 11).Value & Sheets("Main").Cells(b, 11).Value <> "" Then Sheets("Main").Cells(b + 1, 11).EntireRow.Delete End If Next b
If 2 cells are the same i want to delete the row of the 2nd cell, this works. But i dont want 2 delete cells that are blank, this doesnt work. For some reason it deletes everything in the table.
I have a series of IF statements in a formula. I need one of the counters in it to start when the conditions is met.
i.e. the false section in an IF is along the lines of $B$3+J2, and then it continues down the column $B$3+J3 then $B$3+J4 etc. I need the J# to start increasing when the condition within the IF statement is met, not from the very beginning. When I get to, let's say the 13th row, when the condition is met, I want J2, not J13or14.
I need to add a condition to a statement that adds a "If TRUE" reference to another cell.
The other cell can be either a TEXT value "RM1" OR "TE2". If neither condition is true than the value is blank or zero.
So right now I have in the destination cell =IF(AB7="CONT",V7,"") That works lovely, but really isn't countable unless cell "Z7" ALSO has Either "RM1" OR "TE2".
If cell "Z7" has the text "DEA" or "SP" then the value of "V7" will be placed in a different column. I will use a different destination column (for this modified "DEA" or "SP" condition)
So, Excel reads my formula. It tells me it's correct, but it has too many statements. [I know this is true, because the equation is absolutely huge. )
The thing is, I need it to tell me, based on two separate columns - one being "State" and the other being "A vs. O", who this contact belongs to. [For each state, there is a different person for A and for O, and the entire spreadsheet is text.]
My ridiculously large, almost functional function is:
As you can clearly see, there are a lot of terms, but I need both the "State" and the "A vs. O" column to determine the outcome of the column the formula will be in.
I need to sort data similar to below using the following conditions. If the total of A's is greater than 4 they get an A. If the total of E's is greater than 4 they get an E. If they have more A's than E's, assuming they have at least 4 of each then they get an A. If the total is 5, but they don't have 4 A's then they get an E
NAME E'sA'sTOTAL John 235 ( so this one should get E) Mary 459 ( This one should get A) Tim 112 (This one shouldn't get anything) Jane 145 ( This one should have an A) Sam 415 (This one should have an E)
I would like this to sort in one cell - I can do this over 5 cells - but not in one.
I am trying to have a value returned in cell C3 if two conditions are met. In Cell C3 (Sheet 1), if the value in Cell A3 (Sheet 1) is listed in column A on sheet 2, and the 12031 is listed in column B on sheet 2, I need the value of Open to be returned.
I am trying to insert a row after the days that meet the following condition in Column I. I want a row inserted inbetween 120 and 121, 90 and 91, 60 and 61, 30 and 31,15 and 16, 0 and 1. I only want these rows to be place after the last of those numbers being there can be multiples of each and range from A to F. I have tried a number of different things with no success.
I work at a cardboard manufacturing plant in the Q.A Department. Occasionally paper claims need to be raised due to the paper being faulty (out of spec.). I have attached a spreadsheet which at present works out the paper cost according to which paper grade is typed into a particular columb. But, paper price varies according to the width (i.e. Deckle) of the paper as well. And this is the variable which I have not been able to implement thus far.
The relevant columbs are 'D', 'E' & 'I' for the purposes of this formula... It should be noted that below this I have pasted in the paper pricing list... and that in general each paper grade has 3 different prices depending on the Deckle (i.e. paper width), so there are 3 possible prices which can be displayed depending on the Deckle inputted into columb 'E'.
I have a work sheet which includes a column of numbers representing certain daily events. I am building a user defined function to analyse the trend in the numbers by assisigning values from -2, -1, 0, 1, 2 based on comparison of two days.
Below is the function I built but it is not working, it is resulting in zero values in most conditions. I have attached the sheet which includes the numbers and the function.
I am trying to retrieve data from another file using the VLOOKUP function however this is only to happen depending on if any of the 3 items of data appear in column 8(H)
OLY OLY - QUO OLY - PRO
I have the following and know this is not correct
Sub BlockAllocationsVlookupAll() Dim x As Long For x = 1 To 65536 If InStr(1, Sheet1.Range("$H$" & x), "OLY") > 0 Then Sheet1.Range("$I$" & x) = Sheet1.Range("$I$" & x) & "sometext" End If Next End Sub
I know the above doesn't do exactly what needs to be edited to include the Vlookup below
In excel macro, I am trying to input data into sql server from excel ADO what is the correct syntax for an insert statement using string sql? This table has two columns supplier ID autonumber and desc as varchar.
I've been working on this project to propagate certain products through multiple categories. I chose to use excel to assign multiple categories to each product. On sheet1 I have setup products (column a) and qualifiers in the following columns (color, model, etc). What I would like to achieve is for the user to select yes or no for each category column and and if yes then have the corresponding category breadcrumb string (from sheet2) inserted into one specific column in sheet3. As the user continues to select multiple "yes" from the category columns for that single product, those additional category breadcrumbs get inserted at the end of the list in sheet3.
I have the following code to execute a connection to a DB and return the result of the SQL statement. I have a variable in the statement that I want to be able to change from user input in a single cell. Unfortunately I am unable to get this to work.
This fails and gives me a debug error, however if I declare the condition I want the code executes fine. This would mean having to update the code every time the condition changed or putting the whole query in a cell on the sheet which I do not want to do.
as per the attached, need to insert those grey rows subject to the following condition :
if current row date <> next row date, .and. current row latitude / longitude <> next row latitude / longitude , insert grey row with date = current row date, else insert grey row next row date
note that the coordinates in the repeated grey rows, for the "Home" location, are the same through the sheet, should be entered by the user, at the beginning of the process, since there will be a spreasheet per user.
date is in column K latitude / longitude are in columns B / C
this will be of tremendous assistance in automating mileage claim review.
I would like to highlight cells is two conditions are met:Cell = 0Offset(0,-1)>0I tried the conditional format wizard and entered a formula: =IF(AND($J2=0,$I2>0)) But I keep receiving formual errors, which I understand, because it appears to be incomplete formula. But I am not sure what else I need to add to the formula in the conditional format wizard
I am currently using an Intersect statement in a worksheet module to perform two things: 1. Insert a time stamp into row 2 when row 1 has a price inserted 2.To clear that time stamp if the price is deleted at some later date.
My problem is with the time stamp value being deleted by the user. If I try to clear the price (now that the time cell =empty) I get a Runtime error 91 - Object Variable or With block variable not set.
I would like to convert this code to a select case statement but I'm not sure how to do this in this situation. Would error coding be appropriate in this instance?
I'm trying to set up an if statement that will recognize that if a cell is FHR it will do something...but if it's PHR it will do something else. I think I found the place where I keep getting an error but I'm not sure how to go about fixing the issue.
I am attempting to use a previously Set variable as part of the next Set statement, pretty unsuccessfully at present.
My purpose is trying to look up
Code: tb_SelJobID.Value
from a userform in Col Z then look across the row to Cols D,I,N,S & W (different types of work) to see if
Code: TbSelYr.Value
matches the year selected then insert a formula in the row to the left. Then loop down to the FinalRow.
Currently my Set Found1 statement does not recognise my Found10 value. I know it will be my syntax as it always is. I have cut down the following code to display where the problem areas are, Found1 thru 5.
Code:
Sub CmdGo3_Click() Dim Row As Range Dim FinalRow As Long Dim Found1, Found2, Found3, Found4, Found5, Found10 As Range Application.ScreenUpdating = False
I have an Excel Sheet which I use as Database. The database has 11 columns and I insert data with the following function:
Code: Sub testInsert() Dim adoCommand As New ADODB.Command Dim sQuery As String Dim i As Integer
Dim strTest As String
strTest = "test"
[Code] .......
Now I want to retrieve this data. i.e. I want all F1 where F2 and F3 are 0 AND I want them ordered descending. I'm trying to achieve this with:
Code: Sub testSelect() Dim adoCommand As New ADODB.Command Dim sQuery As String Dim mrs As New ADODB.Recordset Dim strTest As String
strTest = "test"
[Code] ....
The result I am getting looks like this: 9 8 7 6 5 4 3 2 15 14 13 12 11 10 1
I assume, that the data is interpreted as String instead of an integer. But I explicitely stated the data as Integer when storing the data into the DB.
I have a master data sheet with four columns, A, B, C and D
Column A has the primary data and B,C,D has dependent data values;
So when I insert a new cell in Column A with cells Shift Down, I want mandatorily new cells to be inserted in the same row in col B, C and D as well so that data integrity is maintained;
