I have a formula that I'd like to have increment by one, but I can't figure out how to do it.
Here's the formula:
=IF(INDIRECT("'Supervisor'!B"&ROW()-4)="Y",E12-D12,IF(INDIRECT("'Supervisor'!B"&ROW()-4)="N","0",IF(INDIRECT('"Supervisor'!B&ROW()-4)="","0")))
I'd like to have the -4 in the equation increment to -5 when I paste it to the next row without having to fix each one of them.
How to increment a formula with an If statement that transforms 2 values in time format and then as long as these two values keep beeing added in the cells the formula keeps active in the column.
I tried to apply the code for all the but this makes my file huge like 20MB!
You can check this on the file, go the "records" sheet, add the time in the "shift start" and "shift end" fields, then the difference value goes to "hours" in the sheet.
[URL] .....
I have a workbook with 70+ worksheets that pulls data from a single input sheet and I need to increment the cell references in each worksheet by 1. Is there a way to do that without having to manually open each worksheet and change the cell reference.
VB:
'Row 27 on worksheet 1 cell B27' =+Input!$D3
'Row 27 on worksheet 2 cell B27' =+Input!$D4
'Row 27 on worksheet 3 cell B27' =+Input!$D5
Thru worksheet 70
'Row 27 on worksheet 70 cell B27' =+Input!$D72
I have a sheet which needs to look up one reference and then fill a table with the rest of them.
EG:
Cell A1 contains '0091 911'!$E$2 (cell E2 contains value 100)
Cell A2 contains =indirect(A1) and displays value 100
I need a formula which will auto fill the remaining cells in the table.
eg:
Cell A3 fills to contain '0091 911'!$E$3 (row +1)
Cell B2 fills to contain '0091 911'!$F$2 (column +1)
so it needs to fill the Indirect reference and not =indirect(A1),=indirect(A2)....
Have table with five columns and five rows. The columns(C4:H4) hold Systems, Systems is a defined range, and rows (B5:B9) hold staffer names, Staffer is a defined range. Cell A5 holds period, by quarters, ie, Q1-Q4.
At present am using =COUNTIFS(Staffer,$B$5,System,C4,Q,$A$5). This works fine but as you can see I must change the Staffer starting reference $B$5, with each new row.
formula that changes column and row automatically as I drag down and across.
I am needing a macro to modify a cell reference contained in a formula. For example: I have "=B2" in a cell of my worksheet, and I need some code to select and increment that by 1 so it becomes "=B3". I know how to use the ActiveCell.Offset command, as shown below, to select a specific cell so that it can then be modified, but I can't figure out how to make the actual change. ActiveCell.Offset(rowOffset:=0, columnOffset:=-1).Select
View 3 Replies View RelatedIf I type the formula below into cell A1 and then drag it to cell A2 it correctly changes $A6 to $A7
CELL A1 =Planner!$A6*(BS8/20)
CELL A2 =Planner!$A7*(BS9/20)
I would like it to change $A6 to $A14 and then to $A22 as below. In other words adding 8 to the reference each time I drag it down.
CELL A1 =Planner!$A6*(BS8/20)
CELL A2 =Planner!$A14*(BS9/20)
CELL A3 =Planner!$A22*(BS10/20)
CELL A4 ==Planner!$A30*(BS11/20)
I'm using a macro to update individual formulas in a sheet that contains data from external documents. (i.e. ='C:September[Book2.xls]Sheet1'!$AZ$1 + 'C:September[Book3.xls]Sheet1'!$BA$1 ) Every quarter I have to change the column references in this formula (i.e. $AZ$ will become $BD$ and $BA$ will become $BE$ and so on). Also I have to change the September reference to December etc (but I've mastered this already). My current code works well, but requires manual updating:
Dim ColumnReference1
ColumnReference1 = "BD"
Dim ColumnReference2
ColumnReference2 = "BE"
Worksheets("Sheet1").Range("H48").Formula = "='C:September[Book2.xls]Sheet1'!$" & ColumnReference1 & "$1 + 'C:September[Book3.xls]Sheet1'!$" & ColumnReference2 & "$1"
My problem with this method is that I need to automate the updating of ColumnReference1 = "BD" to ColumnReference1 = "BH" to ColumnReference1 = "BL" and so on and so forth. It's handy that the reference shifts across 5 columns, which remains constant. Ideally, I'd like to tell the macro to look at "AZ" then add 5 columns.
I'm trying to write a formula that will keep the Column ID static while allowing the Row ID to be reference. Each week my worksheet adds one line and the formula in question is moved one cell to the right and thus the formula cell makes the same move (1, -1). I need the formula to keep the column the same from week to week, while allowing the row to shift downward with the formula. I've attached a sample spreadsheet with the formula I derived. Check out the highlighted formula to familiarize yourself before running.
View 2 Replies View RelatedI am trying to link cells between two worksheets and am having some difficulty. For instance, in E17, I want the cell to reference cell H41 on sheet 2 and for F17 I want it to reference H42 on sheet 2, etc. However, using the formula =Sheet2!H41 when I cut and paste the formula it changes it to =Sheet2!I41 (ie it changes the column and keeps the row constant). I want to find a way to fill a large amount of cells this way and would prefer to not have to manually change each cell individually. I assume I would use the indirect( and the column( commands but can't seem to figure that one out.
View 2 Replies View RelatedI have items in a column like below:
Line (A1) asdfasdf
Line (A2) adsfadsf
Line (A3) asdfasdf
What I would like to be able to do is highlight the three columns and fill down, but I would like for it to increment and paste the next three lines filled like this:
Line (A2) asdfasdf
Line (A3) adsfadsf
Line (A4) asdfasdf
Then below that the next three lines filled like this:
Line (A3) asdfasdf
Line (A4) adsfadsf
Line (A5) asdfasdf
The (A1, A2, etc.) are cell ranges and already contain the concatenate function that pulls data from a different location. The problem I am having is when I
highlight and fill down, it doesn't increment the cell by +1 (Ex. A1 beomes A2) but instead by +3 (A1 becomes A4) the number of lines highlighted.
I am trying linking it and this what I am trying to do , need a formula for it.
E.g.
Sheet 1 cell J3= Sheet 2 cell K3
Sheet 1 cell J4= Sheet 2 cell K9
Sheet 1 cell J5= Sheet 2 cell K15
and so on.
I am creating a training document for work; the sheet I'm creating is a summary sheet which works out how many people answered questions correctly, incorrectly (bringing in from another sheet), number of questions answered and percentage of correct answers.
Looks like:
Correct: =COUNTIF(sheet1!E2:E36,"correct")
Incorrect: =COUNTIF(sheet1!E2:E36,"incorrect")
Number of questions answered: =SUM(C4+C5) (correct+incorrect)
Percentage right: =SUM(C4/C6) (correct/number answered)
I need to drag these 4 formulas down into another 400+rows, however in the correct and incorrect formulas I need it to keep the 2:36 but change the e to f, g, h, etc.
I'm having to copy formula on a tabulation sheet that compiles information from other worksheets, and I need to change the formulas in each row to refer to the successive worksheets. Right now I don't know any other way than changing the formula in each cell, and this is taking way too long.
Example:
One cell's formula: =COUNTIF('5'!$F$21:$T$50,TABULATION!C$5) In the next row down, I need it be: =COUNTIF('6'!$F$21:$T$50,TABULATION!C$5), then =COUNTIF('7'!$F$21:$T$50,TABULATION!C$5), and so on.
[URL]
[URL]
I have data in worksheets that make up the 52 weeks of the year. Each sheet is numbered like this "WK1" "WK2" and so on... up to "WK52"
Each sheet is setup exactly the same so all cells are the same.
So I have a summary sheet that structures the data from all the week sheets to plot to graph all within the same file.
Thing is when I link the first cell to the first sheet say WK1 and then try to drag the formula down to the worksheet number does not increment
Tried the code in the beginning of this post and it displays the worksheet and cell number in the cell cant get the actual data to be displayed.
When I drag this formula down I want it to index the worksheet number
=WK44!$AG$14
Like this
=WK44!$AG$14
=WK45!$AG$14
=WK46!$AG$14
This is what I get in the cell when I use the formula given in the post
WK01! $AG$14
I am working on a model for a school project. Time is in ColA, the number of events is in ColB.
Each event requires one person to work before and after the event. For example, if we assume that I need one person 30 min before the event, one during the event and one 15 min after the event - ColC shows the number of staff required. I would need a formula to calculate ColC. Basically I want excel to add the values of the rows above and below a value if it is within a specified time range
It gets a little bit more complicated unfortunately, the time requirements need to be dynamic - so one day it is 30 min before the event, but another day it could only be 15 min before but 30 min after the event etc.
I was trying to do this with a SUMIF formulas, but couldn't get it to work.
Col A
Col B
Col C
7:00:00 AM
0
1
[Code] .........
to copying a formula from one column to the next adjacent column and also incrementing the 2 numeric values inside the formula. Please see attached sample.
One value increments with each new column whereas the other increments with each new row. Please see attached sample.
And in the last row there is the average formula which must copy the new column and average the new column.
I tried to create a Macro in attached but it did not work with formulas.
I am trying to increment a row when i copy it across columns. I have searched for a couple hours on how to do this, but I have not come up with a solution that I can understand that works for my situation.
I found this page, but I guess I am too novice to comprehend it. [url]
I would like the number in this formula to increment when i copy it to the adjacent column.
This formula is in B178.
=IF(B8="x",A8,"")
So in C178 I want it to be
=IF(B9="x",A9,"")
COPYING indirect formula. When I copy, the lookup reference does not change. My formula is =INDIRECT("'"&$A247&"'!j106"). When I copy horizontally across cells, I want J106 to increase, ie j107, j108 etc. At the moment it remains at J106 and i have to manually increase the numbers by 1.
How do I change my formula so that the numbers increase automatically?
I have a spreadsheet containing quite a few lookups etc. I am trying to copy a cell across about 10 columns. This has to be done for about 50 different rows on about 20 different sheets, so I am looking for an alteration to the formula to help me rather than typing in the formula over and over;
='Basic Labour'!AD6*Rates!$E$526
Say this is in AD6, then in AE6 I would require
='Basic Labour'!AE6*Rates!$E$527
and so on across the region to be autofilled...
(It is multiplying the same cell in a different sheet against the 'next row down' in a rates lookup sheet).
Make a loop where I can increment the row number and execute the command where I set the formula?
View 1 Replies View RelatedAs per this screenshot,
I am trying to work out a method which will allow me to drag the forumula which is in cell B13 from B13:B17, and have in increase the date serial number by one for each row by which it descends.
In other words I want to drag the formula down to, say B14, and have it increase the date serial to = that which is in cell A14.
[the obvious benefit of being able to do this is that I don't have to manually adjust the date serial in each cell on each new row]
In my data validation I have the following formula as the Source: =INDIRECT(SUBSTITUTE($F$2," ","_")). I want to be able to copy the cell and paste it into another cell and have the formula update to reference the new cell. Currently the validation is for cell G2 and references F2. I want to be able to copy G2 and paste it in G3-G6 having the formula update so it refrences F3-F6.
View 3 Replies View RelatedI am creating a spreadsheet which creates a bulk of data from a front sheet.
The question is:
Is there a way to automatically copy a fixed formula for 100 cells using one fixed cell reference such as $A$1 and then automatically after 100 cells replace $A$1 with $A$2, after another 100 with $A$3 and so on?
Explanation with Example:
For example, Sheet1 contains the words "Green Tree" in Cell A1 and Sheet2 will then place "Green Tree" into 100 different sentences such as:
Plant a Green Tree
Grow a Green Tree today
This would be created with the formula ="Grow a "&'Sheet1'!$A$1& " today"
After 100 different variations using the formula I want to change that formula to reference cell A2 on Sheet1.
I know if I place "Red Tree" in Cell A2 and use the formula ="Grow a "&'Sheet1'!$A$2& " today" I can do this manually using find and replace for the 100 cells, but I want to do this for 100 different variations of Green Tree to create a 10,000 different sentences so I'd need to find and replace 100 times!
I have a formula that I want to insert using a macro, so how do I iterate the * values in this line?
ActiveCell.FormulaR1C1 = "='Sheet1'!R[*]C[*]"
I'm quite a novice at Excel. I have a column of values that I sum as follows;
A
0
0
0
0
0
0 <----------------sum of A1:A5
A formula may change one of the values in the above column to a '1' which means the sum will become '1'. The sum can only be '1' or '0' and only one value in the column will ever change. I need to add a value of 2 to another cell (say, C1) when the sum of A1:A5 changes from a value of '0' to '1'. I know this will probably involve the worksheet change event but am having a problem implementing it.
I want to take the date value of a cell, add one day to it and paste it to another sheet's cell. For example if Sheets("x").range("i4").value is 12/12/1999. I want to add a day to it (13/12/1999) and then paste it to Sheets("y").range("d3").value
View 4 Replies View RelatedI have a sheet with the column for time the format should be h:mm:ss, the time begin with 0:00:00 and 10 sec periods 0:00:10 ...until 50sec again in the next count wud be 0:01:00 again 10sec periods.. How to write the Macro, that automatically increse the values of minute (mm)if the ss attains 60 and increment the hour(h) value if mm get 60.
View 2 Replies View RelatedI want to write formula in cells(many cells!) using concatenate. The desired output:
In Sheet2!D1 - i will write concatenate of Sheet1!C6 and Sheet1F6
in Sheet2!E1 - i will write concatenate of Sheet1!C7 and Sheet1F7
in Sheet2!F1 - i will write concatenate of Sheet1!C8 and Sheet1F
Copy and paste formula would not do so i created a macro stated below. The problem is a can not change the ActiveCell.Formula correction.
I have a table... One of my cells is called Capacitors and the number of the cell is 202600. This is the default value. How can i increment this value?
For example:
I have capacitors in one cell with this value => 202600.
But I want to put capacitors in another cell and i want the value to be 202600 + 1 => 202601
Another cell with capacitors with 202600 + 2 => 202602
And so on...
Capacitors.JPG