Insert Variable From Sheet Cell Into SQL Statement In VBA Code
Oct 29, 2013
I have the following code to execute a connection to a DB and return the result of the SQL statement. I have a variable in the statement that I want to be able to change from user input in a single cell. Unfortunately I am unable to get this to work.
This fails and gives me a debug error, however if I declare the condition I want the code executes fine. This would mean having to update the code every time the condition changed or putting the whole query in a cell on the sheet which I do not want to do.
I am trying to have a cell in sheet "Summary" count the number of cells in column DX of sheet "Analyses" that are greater than 0, provided that the value in column A of "Analyses" corresponds with the value in B8 of sheet "Summary."
(In "Analyses," there are 106 subjects, each taking up 64 rows. So, columns 1-64 correspond to Subject 1, columns 65-128 correspond to subject 2, etc. In column DX, each subject has 64 values that are either 0 or greater than 0. In "Summary," each subject has one row that summarizes the 64 trials. I want a single cell in the "Summary," sheet to reflect the number of times each subject produces a value greater than 0 in column DX of "Analyses.") I tried using this formula, but it did not work correctly:
(Summary!B8 = 1, so I am trying to calculate the number of values in DX that are greater than 0 only for subject 1.) When I press enter, this yields a value of 384. This is impossible, given that subject 1 only has 64 possibilities of yielding a value greater than 0. Subject 1 has 2 values in column DX that are greater than 0. I tried making this an array formula by pressing Shift+Ctrl+Enter, and that just gives me a #VALUE! error.
I am trying to insert 50 tabs (at different points in time during a macro) that each has a state abbreviation. I know how to get the macro to add a tab, but to name it, it wants to select " Sheet 4". The problem with this is, the tab that was created might be sheet 15 or sheet 1, and I need it to be able to name the tab no matter what sheet # it is.
I have a set of worksheets (Sheet31 through Sheet49 by codename) produced by a machine in the lab. I want to create a summary sheet that references cells in those worksheets.
Rather than go through the annoyance of doing this manually 40+ times I'm working on creating a macro to populate the summary sheet for me.
This is what I have so far
For J = 31 To 49 ResultSht = SheetJ.Name Sheet1.Activate ActiveSheet.Range("A4").End(xlDown).Offset(1, 0).Select
It hangs up on the "SheetJ.Name" however. My objective is to be using the object SheetJ, where the object SheetJ is the codename of the results sheet I'm trying to reference (for example, in the first pass through the loop it would be Sheet31). Could someone point out my mistake in this object reference?
I have a front sheet with a list of all the sheets in the workbook in column A. In column B I need to use the counta function to count the number of entries in the corresponding sheet to column A.
As there are 70 sheets I'd thought I'd use a Macro but I'm having great difficulties. I've done a search but can't find what I'm looking for.
So heres part of my code (it uses loops etc which I've managed but this just errors)
The str2 is the string name to reference the sheet in the formula (for example sheet1), I can't figure out how to enter this into the code so it works and is accepted.
The below code used to work for me perfectly but in the last couple days it's been acting up. The code is supposed to cut out 2 rows from sheet1 and insert it in order of column B in sheet2. Up until a few days ago the code was inserting the 2, cut, rows properly but now it inserts it at the top of the sheet.
On the attached Excel file, I have code that will insert a variable number of rows and copy and paste from and to variable positions. That all works fine when run from a command button, but when I try to run it from the Worksheet_Calculate by entering 1 in J1 or K1 (inrange cell is J1+K1 for testing purposes) the CommandButton1_Click sub runs continously until an error occurs.
The row on the top currently matches the column on the left side. This was done by using simple commands like "=A4", "=A5", "=A6" in the top row. Now I am trying to expand this table to a variable amount of columns and rows (there will always be 3 more rows than columns like there currently is above), so I want to write some code in VBA that will put these equations in the cells for me.
Here is the tricky part though. The numbers in the left column are actually calculated using the solver, and the numbers in the middle cells reference both the left column and top row. Because of this, I actually need to put an equation in the top row (like the previously mentioned "=A4") so that it always has the newest result from the solver.
The left column will always be in the same row, so only the number itself needs to change, but I'm not sure how to do this.
I am trying to reference a cell in a different sheet and am having a hard time getting the formula to return correctly. The IF statement is currently written like this,
In the sample i have list of codes,also i have picture according this codes: Can i somehow conected pictures and codes? My pictures are in jpg form,can i insert them into cell,where picture should has form as cell has.
When the code from the Data sheet in cell A2 sheet 1,than show the picture conected with this code in Data sheet.
Hello I'm looking for some clarification about how to use "= SUM(RC:RC)". I don't understand what the RC:RC represents. I thought that this was the directions for where to "position" the formula, but I think I'm missing something.
I was able to include the correct cells that I need summarized, but the answer is not right; it's zero.
I need my program to: - find the cell containing the string "Datum/Tid" - record the column and the row of the found cell in two variables lCol and lRow
Here is my
Sub test()
Dim rFoundCell As Range Dim lRow As Long Dim lCol As Long
'Find method of VBA Set rFoundCell = Range("A1") Set rFoundCell = Worksheets("Sheet1").Range("A1:Z50").Find(What:="Datum/Tid", After:=rFoundCell, _ LookIn:=xlValues, LookAt:=xlPart, SearchOrder:=xlByRows, _ SearchDirection:=xlNext, MatchCase:=False)
'for anyof the two lines down I get the message "object variable OR block variable not set"
I am having to copy and paste rows of data into a new worksheet where the rows sizes change and I am wanting to add a new row at the end of the pasted rows but with the sumation formula to add the relevant column
e.g copy range B14:AA17 with in this case columns E to AA holding the numerical values. Therefore I wish in cell E18 to sum the value of E14:E17 and so on ending with cell AA18 holding the sum of AA14:AA17
As these vary I have all relevant variables, Range to add sumation values to eg E18:AA18 Start Cell E14 and so on.
I tried adding "=SUM(x:d)" where x and d are vars relating the the column cell required eg x = E14 and d = E17
Does anyone have a VB macro that will copy information from a cell (this will be variable based on criteria) and paste it into the middle of another cell that contains HTML code?
The criteria for the copy/insert/paste is that the information in the cell that is to be copy/inserted must match up with the correct number (part number).
I hope this makes sense. I have attached an example spreadsheet. (Pictures are worth 1000 words. ) Hope someone can help. I checked this site and couldn't find anything that was solved that matched the specifics.
I am working on a search and replace macro. It's purpose is that within a region that varies only in row size, it's suppose to compare two values, A and B. A is only placed in one cell in the region, while B is a one column range in the region.
If A <> B, A should replace all B's in the region.
These regions are placed on top of each other in a long table. Please see the sample workbook, SampleDRW.xlsm
The code I am using is this:
[Code] ......
The problem is if the B value in the next region is the same as the one before but the A value change, my code don't pick up on it, because it only looks for changing B!
How can I expand the code to also pick up on this problem?
I have a workbook with single sheet called Fronpage. I want to insert a new sheet and rename the sheet based on the character value user specified in R1C1 in the Frontpage, and also would like the new sheet to be the last sheet in the workbook. I have tried to use DDE, and also Macro recording to do it. It didnt work out. Can anyone have any code to do it ?
I would like to create a macro that could archive entries from one sheet and insert them in another. I created one but the problem is that the entry has to be the same row each time.
Example:
Sheet 1 – is current jobs and sheet 2 is old jobs.
My macro moves an entry from Row A-5 of Sheet 1 and moves it to the top of Sheet 2.
I would like to be able to scroll through each entry select it and have it moved to the top of the Old Jobs sheet.
I have a formula that pulls data from another sheet using standard reference of sheetname! I want to build this forumla to use several sheets, and would like to pull the sheet names from other cells.
For example... instead of LEMONS!a1 and LIMES!B2
I would like to use REF1!a1 and REF2!B2
where REF1 and REF2 are pulled from cell Z1 which contains test 'Lemons' and cell Z2 which contains text 'Limes'
In excel macro, I am trying to input data into sql server from excel ADO what is the correct syntax for an insert statement using string sql? This table has two columns supplier ID autonumber and desc as varchar.
I am trying to make sense of quite an elaborate macro built by someone else. This has the following line of code
Code:
Public Sub readOperation(rowNumber As Integer) Dim rowOff As Integer rowOff = rowNumber - 1 'other arguments and conditions End Sub
What I am buggered about is that I cannot see the the variable rowNumber being declared anywhere but it seems to have a value of 1. I should mention that Operation is a class and I am very new to classes.
Does the object in a 'With' have to be an object or can it be a variable containing the name of an object.
I want to carry out the same series of settings on a number of objects and propose to define a Sub and pass the name of the objects as a parameter. I then want to use a 'With' to set that object. i.e. as shown below - though I cant see how it would work.
Private Sub Setuplist(whatlist As String) 'some complex filtering and sorting goes here ... Set rnData = ActiveSheet.Range(whatlist+"List") vaData = rnData.Value With Me+whatlist ' this is the bit I cant fathom . . End With End Sub
I've been working on this project to propagate certain products through multiple categories. I chose to use excel to assign multiple categories to each product. On sheet1 I have setup products (column a) and qualifiers in the following columns (color, model, etc). What I would like to achieve is for the user to select yes or no for each category column and and if yes then have the corresponding category breadcrumb string (from sheet2) inserted into one specific column in sheet3. As the user continues to select multiple "yes" from the category columns for that single product, those additional category breadcrumbs get inserted at the end of the list in sheet3.
