My table is the equation of time (EoT) (sundialist's jargon). It shows each day of the year if the sun is running fast or slow according to the clock. I need to make (on another page of that file) where I input the month and date. It will then till me the time it is fast or slow
View 5 Replies
I have a input box that prompts a user to enter a date of a new month - it has to be the 1st of a new month. I have validation that it is a date that has been entered but then i want to validate the date entered is a month ahead of a date in a cell range on a sheet.
It is a monthly reset so it has to roll on from the previous month.
Here is what i have currently but it isn't working.
Code:
' Get user to input the first day of the new month to populate all dates with
dNewMonth = InputBox(Prompt:="Enter first Day of the new Month. Must be the 1st of the Month e.g. 01/10/2012", _
Title:="Enter Date")
' Validates the entered date is a valid date
If (IsDate(dNewMonth) = False) Then
[Code]...
I want a macro. when i run this macro pop up a input box and ask for copy of master copy and asked for rename the file...
E.g. I have a master file in "z:42766decmasterfile.xlsm
When I click macro then macro do a copy of masterfile and rename it according to choice...
The code which you provided works fine no problem for a page break. I need to run the macro for the page break by asking the input file for page break to be done.
For Example, If excel filename "A" contain the code which you have given need to ask to input the filename "B" and process need to be done in file "B".
I have added some code to your code which you provided but it gives error message "1004" "Method 'Range' of object '_Application' failed" at following line :
Set rng = oExcel.Range(Cells(2, 2), Cells(Rows.Count, 2).End(xlUp))
I'm working on the following
Workbooks.Open Filename:= _
"D:CommondataIBMmainBRANCHBURG-PRODUCTS-BOM-ALUMINUM-UPDATE-" & Ucase(Format(DateAdd("y", 0, Date)), "YYYY-MM-DD")&".XLS"
ChDir "D:CommondataIBMmain"
ActiveWorkbook.SaveAs Filename:= _
"D:CommondataIBMmainBRANCHBURG-PRODUCTS-BOM-ALUMINUM-UPDATE-NAFTA.XLS", _
FileFormat:=xlNormal, Password:="", WriteResPassword:="", _
ReadOnlyRecommended:=False, CreateBackup:=False
ActiveWindow.Close
Date: 2009-06-03
What I'm trying too do is open a file, make an exact copy and save it under a new file name.
My problem is in the date formula the day is not always the same. In the sample case it's 03 at other times the day will change.
is there a way too get this too work irregardles of what the day might be?
I have my ms access and ms excel which is connected each other .
=> now in my ms access have a table name (tblMonth) has columns (year,MonthNum,StartDate,EndDate)
HERE: sample in january(1) and feb(2)
YearMonthNum StartDate EndDate
2014 130/12/201305/01/2014
2014 106/01/201412/01/2014
2014 1 13/01/201419/01/2014
2014 120/01/201426/01/2014
2014 127/01/201402/02/2014
2014 203/02/201409/02/2014
2014 2 10/02/2014 16/02/2014
2014 217/02/201423/02/2014
2014 224/02/201402/03/2014
=> and for my ms excel has its columns (year,month,date) in this if i input the date that is base in the database range from StartDate TO its EndDate will automatically put the month and year which base also in my database (year,MonthNum)
HERE:
A1 B1 C1
Year Month Date
A2=2014 B2=January C2=01/01/2014
I have a list of dates going through several years of data - month ends and starts don't always coincide with calendar months. I need to figure out a way to get the oldest date of the previous month, for example. Tried vlookup but could figure out how to do it for one year only, hence not as applicable with several years of data.
View 9 Replies View Relatedi want a macro to search all of column A in multiple sheets for a date that has been put into an input box.
the matching dates have data corresponding to them in that row. i want the date and data from the row to then be copied into a new sheet.
I want to place the atribute (Date as value): "LastAccessDate" of a file called "!FileSessionStart.nwd" in Sheet1.Cell A2 in my workbook - without opening/accessing" this "C:/so-and-so/!FileSessionStart.nwd" - just want to read and use the last accessed date of it.
How will a macro go finding this atribute of this particular file and place this atribute as value as described?
The filepath of it is valued in celle A1
I have eventually got my Worksheet up and running but now im trying to make things a little easier to complete. The plan is when the Engineer is on site he has to open the Excel sheet to check the tests he has to complete and then mark the results. this is fine but for vaildation he has to sign everthing etc... i made it easier so they only had to fill in one box and it would complete the rest but this seems to get missed more often than not.
SOOO
i want a Screen to pop up when some one opens my excel that says Enter name and contact details. then they submit this which updates the spread sheet with this information and then the engineer can continue as normal.
is it possible to make row 1 the (headingline) top of every printable page? office excel 2007 by the way
View 3 Replies View RelatedI've been using excel sheets to create reports for clients based on various sized samples of bars (I'm a test engineer). The sheets are essentially the same format though information will vary (such as bar type, diameter, etc.) I've been working on automating these sheets so that I don't need so many template-like tabs (currently I have a workbook for each client setup with 5-20 different sheets just in case the client sends in those bars! Half of the sheets stay blank and it can be confusing/cluttered).
Here's what I want to do: Have one page or popup window where I can input the information (job number, bar size, bar type, etc.) press the magic button and have it spit out a new sheet with that info added into the template. Is this doable?? I've never used macros before but I'm assuming I'll need to, which is fine, how that works.
What i'm looking to do is create a spreadsheet where the first page allows me to input the number of teams in the group.The teams cannot play others in the group except the ones they are paired with. eg. "Enter number of team pairs in set" (in this case 4)
Team 1a vs Team 1b
Team 2a vs Team 2b
Team 3a vs Team 3b
Team 4a vs Team 4b
After number of teams in set is established click a start button on the first tab of the spreadsheet.
this auto generates a new tab with all the possible win/loss combinations of 4 team pairs.
New Picture.jpg
if the number of teams on Tab 1 is changed (say to 6) and the start button is clicked, another new tab is generated with all possible win loss combinations of a 6 team set.
remember 1a vs 1b can only be win or lose and the win lose combinations are for the set of 4 matches ( or more matches if specified on the first tab and clicked).
if you put 7 in for the number of team pairs then it would be win loss combos for 7 pairs of teams.
I have multiple data validations with input messages. For the new user, this is handy, but for the person that does this a lot, they get in the way. When I open the sheet, I can move one message to the side of the page and the rest of them come up at the same spot but when I save, exit, and reopen, the message comes up beside the cell and I would like it to always stay to the side of the page.
View 9 Replies View RelatedI have a workbook that has a single sheet in it, in cell G2 I want to insert a page number where if I print of multiple copies on the first sheet it will say 1, the second 2, the third 3 and so on and so forth.
I have never written any codes for Excel.
I have a spreadsheet that is now a yeare old with 5000 rows and is now going into the 2nd year
Column A is for date input and the same date can be repeated several tumes :-
1 Jan 09
1 Jan 09
1 Jan 09
1 Jan 09
2 Jan 09
2 Jan 09
3 Jan 09
3 Jan 09
3 Jan 09
Sometimes there are all 30 /31 days but normally not .
I need to find the last ocurance of the last date used for each month and then use the cell number to calculate the column totals for that month.
Need to create year to date sales comparing 4 years month by month. Stacked chart (Excel 2010) works OK for the first three months but adding the fourth month changes the chart to 4 series with a monthly axis. To put it another way I need a vertical axis of years and a horizontal axis of $$$ with each months sales of each year stacked on its year.
View 10 Replies View RelatedI'm in the process of continuing to build this babe (very slowly, as I have limited programming knowledge), and I wondered if there was a way to modify this code to make it refresh the data page if a server's page fails to load.
Part of my code is something like this, the first part being just the pseudo log on script.
Especially when there are over 50 pages to grab, the chances of one of the pages failing to load is VERY high, and this macro stops at the "Refreshbackground=False" command.
Is there a way to trigger a "refresh" once it fails?
I have log data in two columns:
Column A: Date/time (at 30 minute intervals)
Column B: Numeric data
On the last row of each month, I’m trying to perform a SumProduct on the two columns and display that result in column C.
The end of the range is determined by the month in the current row.
I’m having difficulty finding the beginning of the range, though. I need to account for both the normal dynamic calendar days & the fact that I may get data starting mid-day and mid-month.
I have this formula, but I’m not sure how to make the first array dynamic or if this is even correct approach.
Manual
=IF(OR(MONTH(A1009)=A4)*(A$4:A$65536
where i'm going wrong with this?
If ThisWorkbook.Sheets("Obs Sheet").Range("C" & Counter).Value (=MONTH(TODAY())) Then
I'm not sure how to make VBA use the excel MONTH command.
I have a range of dates from 2003 to 2012. I formatted them to the 'Mar-01' option, but when I want to pivot on the month, Excel still reads them as the date - example 3/25/2008, 3/28/2008...and so my pivot table has multiple columns for all of the dates present in that month.
How do I truly format my dates so that excel reads them as the month only so that I can then pivot and show 12 columns (months) per year?
I only want to include the Month of January in a sumproduct function on another page using a name manager array.
I was thinking of using
=SUMPRODUCT(INDEX(DATA,0,17),--((MONTH(INDEX(DATA,0,5)=1)*INDEX(DATA,0,17))
Where the dates are in the 6th column and include blank cells at the bottom and in the first row it says Date.
I have nearly finished my project, but need to make the last real bit of code, then just some general tidying up.
What I want to do
- I currently have two tabs in a userform - one called 'main' and one called 'extra'.
- I want Main to always be shown to the user.
- I want Extra to be hidden (is it possible to make the tabs invisible?) and for this form to be shown only under a specific condition
I have a question on my userform (using Option Buttons):
"Did the customer ask about an extra product today?"
If the answer to this question is no - When the user hits the command button (after filling out the rest of the form), do nothing special - just return all the values to the worksheet
If the answer is yes - When the user hits the command button, I want them to be taken to the 'extra' tab. They will fill out some additional check-boxes, then hit another command box, which will return the info from both the 'main' and 'extra' sheets into the same row of the worksheet.
In brief: I want my 'extra' tab to be hidden, only to appear when 'yes' is selected, and for the results all to go back to the worksheet.
I have a paragraph that i am trying to change a number in the paragraph. example
John has 3 kids he sells one kid he has 2 kids left. Later John's wife figures out and kills John 4 times.
I am trying to replace the "4" to an imputed on an user fourm imput box can i do this?
im trying to make an 18 month 'revolving' calendar diary. below link is what i've done so far with the help of a snippet of code...but it doesn't do what i need yet.
View 2 Replies View RelatedI have a project coming up where I will receive tables in a certain format. I want to be able to create a macro that well create a chart based on a single inputted cell (start of data). The chart will have 4 series and five values per series. See the link below for sample data! The first data point is not in the same place in the sheet, but the table will have the rest of the data relative to that!
[URL] .......
I have a macro that takes a text file as input and produces an excel file as output. I want a macro to store the name of the text file in a variable (without its file extension).
View 1 Replies View RelatedBelow is the current code I have for File Copy before the workbook closes. This file will be distributed all over and obviously will not have the same old path and new path locations as I have in my code also will not have the same file name. Is there anyway to still perform the file copy without knowing the old path and file name and possibly have message box pop up to ask the copy to location and use that in the new path string?
Sub Macro1()
Dim fs As Object
Dim oldPath As String, newPath As String
oldPath = "I:EXLDATAMC Daily" '<---Where the file is currently located
newPath = "H:South RegionOrlando Mail Services2008DI" 'Since the super shared drive is super slow we will just copy and replace this file each time before we close and of course after we save
Set fs = CreateObject("Scripting.FileSystemObject")
fs.CopyFile oldPath & "" & "OrlandoMail.xls", newPath & "" & "OrlandoMail.xls"
Set fs = Nothing
End Sub
How to correct this formula to get correct output.
=IF(P9=TODAY(),IF(P9<>"",CHOOSE(MONTH(P9),
"January","February","March","April","May","June","July","August","September","October","November","December"),""))
It's working fine if the year is 2014 but not if the year is different.
Conditions:
If the date is today then only the month should display else blank. The year should be ignore.
For example:
08/01/2000: January
01/01/2000: blank cell
08/01/2014: January
01/01/2014: blank cell
The date is in column 'p' in dd mm yyyy format. In short if the date is current date that is for today '8' then only the month should be display in the output.
I have a problem calculating something that happened last month if the month is january. At the moment, if the month is not January it works:
View 3 Replies View Related
