I want a macro. when i run this macro pop up a input box and ask for copy of master copy and asked for rename the file...
E.g. I have a master file in "z:42766decmasterfile.xlsm
When I click macro then macro do a copy of masterfile and rename it according to choice...
What I'm looking to do is have a button that will be able to make a copy from my "MASTER" sheet cells A1:M48, then be placed at the end. The copied will then need to be renamed based off of the data in cell C4.
The following is the sample recorded macro:
VB:
Sub Copy_Rename()
'
' Copy_Rename Macro
[Code]....
I am using this code for 2nd coping my file and rename it automatically......
[Code] .....
I want when i want another copy always my path should be "C: estabc.xlsm"
and
For new file in same path "C: estdef.xlsm" an input box ask for the name("def.xlsm") "what new name u want for this new file".
And I input the new name for my file and done.
I have the following macro that imports data from several input files and rearranges it in a master file.I want to change it so that I can use it in each of the input files. Therefore, it should look in the input file for Spreadsheet "XYZ" and rearrange it in Spreadsheet "Data".
[Code].....
I have csv files auto generated (with date stamp in name) and saved in a specific folder everyday. I need to find a macro that will copy the row(s) every day and add to the next empty row in the master excel file. Some days the csv file may have a single row of data and on some other days it may have multiple rows of data to copy and paste.
View 4 Replies View RelatedMy table is the equation of time (EoT) (sundialist's jargon). It shows each day of the year if the sun is running fast or slow according to the clock. I need to make (on another page of that file) where I input the month and date. It will then till me the time it is fast or slow
View 5 Replies View RelatedI have a workbook with 8 tabs and one master tab. The 8 tabs are where the user enters information and the master sheet contains all employees from the 8 tabs. All tabs, including the master, have the same columns in the same order. How can I automatically have the information populate to the master tab as information is changed on the tab groups? I had a vlookup on the master sheet going through all of the sheets however it slowed my report down tremendously and caused too much lag.
View 2 Replies View RelatedI have certain excel file that i want to be able to write a macro in order for it to extract certain information from certain cells on different sheet. In other words, i want cell A2 from each of the three different worksheet i have under different files. And have those data automatically update a master excel or access file whichever might be easier.
View 4 Replies View RelatedI have attached an example sheet : LATEST.xlsm
To sum up - need a drop down box - that when "flange" is selected - It opens a file automatically - no clicking etc. just when that option in the drop down box is chosen.
[Code] .....
But doesn't work, plus means I have to click on something.. etc
I am trying to copy a file, rename it, and save it to a new folder. I keep getting a "Compile Error ; Syntax Error" at line FileCopy (ImagePath & oldName, NewPath & newName). I am using Excel 2010.
FileCopy (ImagePath & oldName, NewPath & newName)Sub RenameFiles()
'Renames file based on "sheet 1" - Column 1 Old file name - Column 2 New file name
Dim oldName As String
Dim myfile As String
Dim newName As String
Dim ImagePath As String
Dim NewPath As String
[code]....
I'm working on the following
Workbooks.Open Filename:= _
"D:CommondataIBMmainBRANCHBURG-PRODUCTS-BOM-ALUMINUM-UPDATE-" & Ucase(Format(DateAdd("y", 0, Date)), "YYYY-MM-DD")&".XLS"
ChDir "D:CommondataIBMmain"
ActiveWorkbook.SaveAs Filename:= _
"D:CommondataIBMmainBRANCHBURG-PRODUCTS-BOM-ALUMINUM-UPDATE-NAFTA.XLS", _
FileFormat:=xlNormal, Password:="", WriteResPassword:="", _
ReadOnlyRecommended:=False, CreateBackup:=False
ActiveWindow.Close
Date: 2009-06-03
What I'm trying too do is open a file, make an exact copy and save it under a new file name.
My problem is in the date formula the day is not always the same. In the sample case it's 03 at other times the day will change.
is there a way too get this too work irregardles of what the day might be?
Basically, the code copy contents from 4 "Child" files to a "Mater" file.
Everything works smoothly but no data is being copied from the "Child" files.
[Code] .....
The other thing I've noticed is that if a "Child" file is open, I cannot run the code. Is there a way that even a "Child" file is open, the code can copy it's contents on the background?
Below is the current code I have for File Copy before the workbook closes. This file will be distributed all over and obviously will not have the same old path and new path locations as I have in my code also will not have the same file name. Is there anyway to still perform the file copy without knowing the old path and file name and possibly have message box pop up to ask the copy to location and use that in the new path string?
Sub Macro1()
Dim fs As Object
Dim oldPath As String, newPath As String
oldPath = "I:EXLDATAMC Daily" '<---Where the file is currently located
newPath = "H:South RegionOrlando Mail Services2008DI" 'Since the super shared drive is super slow we will just copy and replace this file each time before we close and of course after we save
Set fs = CreateObject("Scripting.FileSystemObject")
fs.CopyFile oldPath & "" & "OrlandoMail.xls", newPath & "" & "OrlandoMail.xls"
Set fs = Nothing
End Sub
I have multiple excel files from which I would like to copy specific ranges to a master file. The row should add up to the previous rows. From this side I have no problems things work fine. The problem is to copy the header which remains the same data to the top of the master file. Currently the macro I use overwrite the first line of the master file. So I loose the date from one of the excel files.
View 3 Replies View RelatedWhat I have is a master file that needs to pull info from other sources (a simple copy and paste)
those files are called Inventory_xxxx.xlsm . Inside the master file, there are cells with the number of the inventory.
What i need is a way to tell excel to check what number is in the cell, open the files with that number, get the info from the files and paste it back in the master file... and the part that i consider the trickiest, a way to loop it.
For example, lets say i have 2248 in cell A10, it should open Inventory_2248.xlsm copy the contents from cell N4, O4, P4, Q4, R4 and S4(Inventory File) into N10,R10,S10,T10 and U10 (Master file) respectively then in A11, there could be a 2250 so it should open the 2250 file get the info, paste it and so on.....
Now I don't even know if this is do-able or just impossible, been fiddling with various codes to no avail.
i have one main sheet, and two resource sheets. In main sheet i have resource and project Matrix and in top of the cell i can select the week number. in other sheets, i have week and project matrix for resource. Now what i want is if I enter some details in main sheet, those values should be automatically posted to Resource sheets.
View 2 Replies View RelatedI have a macro that transfers (copy/paste) information from one master file to several other individual files. The macro works, but I would like
to enhance it by have it spit out errors in the process as follows: if cell A42 on file VP1.xls is not equal to Cell C35 on file Masterfile.xls then make cell E2 ERROR and fomat E2 bold-red, otherwise do nothing. The macro should continue regardless, I just want it to spot errors.
I think this is pretty simple is just a matter of inserting an IF formula in the macro which is something i don't know how to do yet.
I have a workbook with 2 - worksheets "DATA" and "LETTER".
The "DATA" sheet has columns "First Name" "Last Name" "Address"...etc.
The user can enter in either a "X" or a "x" in cells B6:B100 on the "DATA" worksheet.
After the user enters a X or x and hits the macro button I need it to copy certain cells from "DATA" worksheet to "LETTER" worksheet. I have listed a example below.
In this example if a "X" or "x" is entered into B6 on "DATA" worksheet and the macro button is hit, then: ....
im trying to create an input message box to rename a sheet.
So far I have
Dim strPrompt As String
Dim strTitle As String
Dim iRet As Integer
'create a copy
[Code]....
But I seem to be getting a complie error with it...I am trying to simply rename a worksheet to what has been put in the message box
I have an excel template that needs to be copied multiple times and each sheet needs be named according to a list in an excel spread sheet. I also have a formula in the template that needs the value copied instead of the formula.
I got this script from an site and tried it. It runs but I don't see any spread sheets.
strComputer = "."
Set objWMIService = GetObject ("winmgmts:\" & strComputer & "
ootcimv2")
Is it possible to automatically copy or load data from one excel spread sheet into another excel sheet? Could this be done with a macro?
View 14 Replies View RelatedHow can I set the SAVE AS file name to equal A1's cell contents? (More specifically, when I need to rename an existing open file and place my cursor in A1 and hit Save As, I need to new file name to automatically populate A1's cell contents so I don't have to retype the contents of A1.)
View 1 Replies View RelatedI'm trying to create a sub that will save my worksheet to a tab delimited text file anytime there is a change in the worsheet data (all cells are linked to cells in other workbooks). I've figured out the command to save the file
ActiveWorkbook.SaveAs Filename:= _
"C:Documents and SettingsChrisMy DocumentsBook1.txt", FileFormat:=xlText _
, CreateBackup:=False
but I'm not sure how to get a sub routine to start running when the file opens and to have it run continuously while open. I've found the command:
Application.Volatile
that will flag when any cells in my range are recomputed and run a function, but functions don't allow me to save the file.
How do I setup one "master cell" to be used as the permanent entry point for dollar values of all entries performed as needed....and have that value be automatically added to the cell of the month reflecting the day the data was entered?
I am looking to keep track of purchases on a monthly basis. (e.g. I have 35 receipts for today...I just want to grab one at a time, enter the total for each receipt in one cell and have it add the value to which ever month's value based on the day I enter it.
I have a workbook with multiple tabs. On sheet one a person chooses a date to initialise a formula. That date is then copied to sheet two and placed in cell D5. The date is projected out for two weeks and then the next fornight starts on sheet three and so on. The start date for each new fortnight appears in cell D5 of each sheet. I want that information to be the name of the tab for sheet two, three etc. I have put this code into the "This Workbook" section:
Private Sub Worksheet_Change(ByVal Target As Range)
' Renames all worksheet tabs with each worksheet's cell A1 contents.
'If cell A1 has no content, then that tab is not renamed.
For i = 1 To Sheets.Count
If Worksheets(i).Range("$D$4").Value "" Then
Sheets(i).Name = Worksheets(i).Range("$D$4").Value
End If
Next
End Sub
I have also tried:
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Address = "$D$4" Then ActiveSheet.Name = Left(Target.Value, 10)
End Sub
I then go back into sheet one and change the date and nothing happens. I seem to be missing something. Can anyone please help?
I am currently doing an excel database of students application. I want a macro that creates a duplicate of a template sheet and renaming it based on the name of the student. Meaning once a name appears in the name cell, a sheet of that particular name is automatically created. At the same time, i want all the data regarding the applying student to appear the newly created sheet as shown in the attached file.
View 4 Replies View RelatedWorksheet 2 is the master file and contains various information. Worksheet 1 is the input sheet. If Column A sheet 1 matches Column A sheet 2, copy data from Column B sheet 2 and input into Column B sheet 1.
I am trying to copy a spreadsheet i made in google docs in excel keeping the same functionality. Since the formulas are a bit different between the two, i can not simply copy the codes so i must start from scratch. The basics of my spreadsheet is that i have (3) columns: A master list, A filtered list, and an input list. I want the filtered list to change based on the values in the inputted list.
ColA = Input list
ColB = Filtered list
ColC = Master list
Items:
Orange
Red
Blue
Yellow
Green
ColA contains the colors i manually enter
ColB contains all the items in ColC that are NOT already listed in ColA (except for Red, i dont what that showing up)
ColC contains ALL the items above.
Two Examples of a functional worksheet:
ColA............ColB
Orange........Blue
Green..........Yellow
ColA........ColB
Orange....Blue
.............Yellow
.............Green
ColB is where the magic happens, it grows and shrinks based on the values in both the master list ColC and the input list ColA
Im trying to get the SPECIAL NUMBER to rename the photos(Column C) according to their names(Column B) and tried using index and match but some of them are giving me errors..
RENAME PHOTO.xlsx
I have some code which looks through a logfile, and creates new worksheets based on items found in a particular column. This is normally working fine. However, there is a particular case where the item in the column is too long - it is actually the path name of a particular file, and which exceeds 31 characters.
This is causing an error in VBA. Is there a way that the worksheet can be renamed if the character string is too long?