I need to be able to select up to 5 different models in cell A1 from a drop down list then have cell B1 look these values up and find the volumes and then return the sum of the volumes - Cell B1 should read 130. There will always be one model selected but it will vary from 1 to 5 selections.
M1,M3,M4,M5
=10+30+40+50
M1
10
[Code]....
If I have, in one cell (call it D1):
EH,DR,HU
and in a lookup table on another sheet:
A B
1 ED T
2 EH F
3 DR G
4 HU H
5 SE E
6 YU E
I need to be able to lookup the values in D1 on the table and return the values in column B to a single cell (say E1), also comma separated...
eg...
F,G,H
I have a single cell with 4 values in it all separated by commas and i would like to pull out each one separately. The number of characters in each value changes.
View 9 Replies View RelatedI have a table in the format below with about 3500 rows
Column A
Column B
0001
All vehicles, Retirements
0002
All vehicles, Retirements, Addition
0003
All vehicles, Retirements, Addition, Deletion from Y
I would like to change it to the following format:
Column A
Column B
0001
All vehicles
0001
Retirements
0002
All vehicles
0002
Retirements
0002
Addition
0003
All vehicles
0003
Retirements
0003
Addition
0003
Deletion from Y
I have a list of emails I need to merge into one cell and separate by commas. It looks like the follwing
A
1. xxx@xx.com
2. xxxx@x.com
3. x@x6.com
I need it to look like
A
1. xxx@xx.com, xxxx@x.com, x@x6.com
I have a cell witch contains CSV I need too look up all the values off a master list an out put the vlookup results in 1 cell
Example:
( SHEET 1/Cell A1)
10,11,12
(SHEET 2/ look up list)
.A .B
110101
211102
312103
413104
514105
(SHEET 1)
I need the output to show the following in Cell B1
101,102,103
I am in need of a macro that will scan a worksheet row by row, noting the column names (found in I2 to AQ2) in a specific horizontal span of cells (I to AQ) that hold (any) data. The macro will then paste these column names in a designated cell on each corresponding row (always found in column F), separating the column names with commas.
I am trying to do this for multiple worksheets containing ~100 rows - the example attached is just a quick demo of what I'm hoping to achieve. Also, these worksheets are contained in one big workbook, so ideally I'd like to be able to run the macro once and have it apply to every sheet in that workbook (they all have the same layout - the only big difference is the number of rows). If the Total Scenes part at the bottom of the sheet is problematic in getting this to work, it's fine to remove it.
code1
code2
lookup Range1
lookup Range2
Return Value
Lookup
Multiple Return
[Code]....
I am trying to vlookup multiple value and return multiple values in one cell
I am currently trying to count data in one cell separated by commas. The spreadsheet attached will make things look a lot clearer.
The "CURRENT" table is what I currently have and the "IDEAL" table is what I would like (but not hard-coded). Sheet 3 is where the meaningful data is. So for example, E4 has "CC-12" which is "Open" and "CC-11" which is "Closed". Therefore I would want there to be a "1" in cell F4 and G4 and a "0" in H4.
Formula to put in F4:H5?
I have the following syntax in B1: "1,2,3,5,6". and I need VBA to take the very last number out of that list, and increase by four in single steps. For example: before the code: "1,2,3,5,6" and then after it "1,2,3,5,6,7,8,9." The code must be flexible, though, because it will be running within another Macro, and it must work whether the last number in the list is 1 digit ("...4,5,8"), 2 digit ("...34,35,36") or 3 digit ("...111, 113, 114"). Those three examples would be changed into "...4,5,8, 9, 10, 11" "...34,35,36, 37, 38, 39" "...111, 113, 114, 115, 116, 117".
View 4 Replies View RelatedI have a list of comma separated values. I would like to change these to tab separated values, and then transpose them so that they are all displayed in one column. Does anyone know if it's possible to do this in Excel 2007?
Example:
Date | Keywords
1/01/01 | shoe, shoes, clothes, clothing
1/02/01 | shirt, shirts, jacket, jackets
I need the Keywords column to display each value separately, and in one column. I also need each row to have the original date information. So I need it to look like this:
Date | Keywords
1/01/01 | shoe
1/01/01 | shoes
1/01/01 | clothes
1/01/01 | clothing
1/02/01 | shirt
1/02/01 | shirts
1/02/01 | jacket
1/02/01 | jackets
Comma separated data on sheet 2, look up info on sheet 1, return comma separated data on sheet 2.
Sample file attached : Book1.xlsx
I routinely have do download massive data sets of reporting that is saved as an excel spreadsheet. The three columns of sample data attached are Report Numbers, Report Evaluation Serial Numbers, and Report Evaluator ID.
As seen in the attached spreadsheet, there can be multiple Report Numbers (in same field separated by comma) which have been evaluated by different Evaluators. It is my responsibility to account for the number of Reports that have been evaluated, and many other metrics from like data. The issue I have is when more than one report number is listed in the same field I need to parse the data into its own field for ease of counting (and also maintain the adjacent data). It is not a problem to merely copy the fields and delete the excess numbers, however when dealing with thousands of Reports, and Evaluators this can be very time consuming. In the attached file I have separated .xls into three workbooks to help explain my problem: Initial state of Data; What I need To Parse Out; and The final endstate I require. I hope that I have explained this issue with enough detail. I am sure that the attached file will explain better.
I have one column of data. there are currently ~10k rows, but this will increase over time. each row has either a single value (example: pepsi) or a comma separated value (google,samsung) with up to 6 commas. instead of the rows looking like this:
pepsi
google,samsung
coca-cola
I want them to look like this in one column (preferably via a formula):
pepsi
google
samsung
coca-cola
I would like the above output to be a unique, alphabetized list.
I have a cell in a table containing user entered Comma separated values.
How can I process it so that user entered values can be referred to just like in an array? Is it possible to do something like cell.value[0]?
For example --
cell A1 has values red, blue, green. B1 has a formula that can refer to "red" in A1 by writing something like A1.value[0]
Is it possible to have a function return values to another cell reference than from the cell where it is called? Like a UDF called functionIndividualValues(InputcellReference, OutputCellReference) functionIndividualValues(A1, A2) meaning that the input string for the function is in A1 and the output should go to the cell A2.
I am wanting to use a vlookup or perhaps an array(?) to bring through multiple cell values based on being the maximum value. So say there are multiple employees (all with unique ids) under one manager (also with unique ID), I want to find the employee with the highest value in a particular column and return that employees details, such as name, employee number and the value itself, which are all in the same row. I have attached a basic example of the data involved.
View 8 Replies View RelatedI have a bunch of cells (could be varying amounts from 2 to about a 100). I need a macro which can find out how many rows in column A contain values and then i need to pick values from each cell in column A and put them in Cell B2 seperated by a comma.
eg.
Column A Column B
22 22,35,67,34,56
35
67
34
56
Column A could contain as many as 100 values.
Parsing values in a column. COLUMN A contains comma separated numbers, varying from possibly an empty cell, to a list of values between 1 and 12 separated by commas. I need to examine the column and place the number 1 in the column corresponding to the number. There will be no duplicates in COLUMN A. Is there an 'easy' way to do this. The table is part of a much larger spreadsheet.
COLUMN A
Team 1
Team 2
Team 3
Team 4
Team 5
Team 6
Team 7
Team 8
[code].....
i would like the code that allows me to copy enything I typing in column a sheet1 to column a in sheet2
View 8 Replies View RelatedI need to count the number of values entered into a single cell seperated by commas for record keepin purposes. I would prefer not to use a macro since I am not an expert, but will if i must. Here is an example of what i am talking about:
User A will enter "109,108,107,106" into a cell in Column A
At the bottom of column A the Total will read 4.
Now User B enters "110,111,112,113" into the next cell in Column A
At the bottom of column A the Total will read 8.
At work I have a spread sheet that I used to track material shortages by part number. So in column A of the spread sheet there is a list of part numbers that have shortages, column E contains a list of all sales orders that are affected by the shortage separated by a comma. I am trying to setup a query sheet where I input a sales order and get back a list of parts that are short for that sales order(basically reversing the original list to be by sales order instead of part number). The number of values in column E varies, sometimes a cell will have 1 value, sometimes 20+ and anywhere in between.
Example Sheet:
A
B
C
D
E
123
012
234
789, 567
465
789
890
012
I'm already got a INDEX/MATCH that would show both shortages for sales order 012. But I can not figure out how to get the shortages for 789 or 567.
How to have a validation list (drop-down) from a single-cell in which values are separated by a comma.
Example I have.
I have a wine list which have many categories of which
COL A / COL B / COL C
Wine Name / Wine Producer / Vintage
I wrote a VBA code to look-up duplicates names and give the producers that make them. The names of the producers will be in an invis cell as Comma Separated Values.
For example: Wine 11 is made by producer X and Wine 11 is made by producer Y. I will have X,Y in a cell which need to be in a drop-down menu when Wine 11 is selected.
I got everything done. The only issue is to get the list. The problem is that the drop-down list shows X,Y as a single component and not as 2 drop-down components. If i were to write down X,Y in the validation list tab, it will show it as 2 components but referring to the cell doesn't.
I have a table of data (say Column1 to Column 5) with multiple rows.
Column 1 to 4 will have the lookup values in multiple rows and Column 5 data should be picked up using vlookup or other lookup function.
I managed to somehow bring all these lookup values in (Column 1 to 4) in a single column in another sheet. I am now trying to use some lookup or other functions to match this single column and pick column 5 data in original sheet. Result i am expecting is lookup value in first column and next to it column 5 value.
It is basically a lookup wherein lookup value is spread over multiple rows and columns and result column is fixed. I tried using vlookup, but lookup value column and column number had to change every time when i moved from column1 to 4.
Example:
Original:
Column A | Column B
Joe | Client A
Joe | Client B
Paul | Client X
Sue | Client A
Sue | Client X
Want:
Column C | Column D
Joe | Client A, Client B
Paul | Client X
Sue | Client A, Client X
I believe it would be very similar to the code that I was provided inCombine Multiple Related Rows Into One. I tried to adapt it to my current need, but was unsuccessful due to my very limited knowledge of vba.
I've a question. For instance
apple,lemon,strawberry
fruit
green,blue,white,black,grey
color
...
...
...
...
I've a list like above. How can we use lookup formulas from comma-separated cells?
white> color
lemon> fruit
I have attached sample sheet.
I need to populate the Rep Names looking up 3 Criteria (Client Id,Curr Cov Id,Dom Buy Grp Id) from the Table 1, either one matches the Rep Names has to populate.
The data has to be pasted on WIP_Sheet in different columns.
I need a Macro (not formula) which compares the comma separated values present in Column "I" with individual values present in Column "D" and generate the count of unique values in Column "J".
The sample sheet has been attached for reference.
Is there a macro that will allow me to create text to row from a comma separated cell, but also associate the cell to its left automatically?
The table below exemplifies what I need. The top of the spreadsheet is how my data is currently. The portion after the break is how I would like it to be.
I have over 600 rows that needs this done.
1,2,3,4
B
[Code]....
I am using the below array formula in G2 (that I then drag across) to show the score for all the times "mike" appears. I would like to match all the times "mike" OR "red" appears, so that the value in K2 is "99".
=INDEX($A$2:$C$9999,SMALL(IF($A$2:$A$9999=$E2,ROW($A$2:$A$9999)-1,"hh"),COLUMNS($G2:G2)),2)
A
B
C
D
E
F
G
H
I
J
K
L
1
name
score
color
[Code] ..........
How the following problem gets sorted out
ColumnAColumnB ColumnEColumnF
33rohan55
44tata55
55dev44
55rony33
As you can see from above i want to lookup all the values in column E in column A and return the corresponding value in column F.
