How the following problem gets sorted out
ColumnAColumnB ColumnEColumnF
33rohan55
44tata55
55dev44
55rony33
As you can see from above i want to lookup all the values in column E in column A and return the corresponding value in column F.
I have attached a sample spreadsheet which describes my problem.
In C2 and C3 under the first business coalitions column, I have written in text what I would like to be displayed automatically with a formula. The trouble is that, as you can see, Abbott Laboratories is a member of 3 business coalitions. Therefore, a simple vlookup doesn't work because that would only return 1 result.
I'm basically working from 3 sheets for this so I'll start with an example of the data I'm using:
1st sheet:
table.tableizer-table {
border: 1px solid #CCC; font-family: Arial, Helvetica, sans-serif
font-size: 12px;
}
.tableizer-table td {
padding: 4px;
margin: 3px;
[Code]....
I have 180 rows of data like this one in the first sheet
Second sheet(named sheet 1) is not used for this
Third sheet(named sheet 2):
table.tableizer-table {
border: 1px solid #CCC; font-family: Arial, Helvetica, sans-serif
font-size: 12px;
}
.tableizer-table td {
padding: 4px;
margin: 3px;
[Code]....
Basically I'm trying to find column #3 value in my third sheet and return the second column value. Problem is that the data is located more than once in the third sheet so I need the value of each one of them. So, with this example, Q5942X is located twice in the third sheet and each time, it has a quantity of 2. I would need either to return the value 2 twice horizontally or even better, add the two together. The first sheet, the example is row #45.
This formula should be in the column following "majoration".
I am using excel 2007 and windows 7.
Certification and Training tracking.xlsx
I want to create a certification only list on a separate tab of training that has been completed where a certification has been issued (as indicated by a "Y" in the "Certification?" column on the training tracking tab) and then populate from some of the fields vs. all of the fields.
What I have now, only pulls the first occurence, not all occurences. I saw that I could have identified the multiple columns that needed to be populated, but it didn't work either, so I'm fine putting a separate vlookup in each column.
I have been searching all day about this topic and while there are many "solutions" none of them fits my criteria and I can't figure out how to tailor it.
I am using a very basic data sheet to populate a purchase order. I want to be able to search a style and have all the data (color, units and price) automatically fill in upon entering the style number, I have been using vlookup but this only works if there is one color per style.
I have found different lookup functions that give the value +1 when the data is sorted but it returns the value even if it doens't fit the search criteria, I only want to return the second value if it correlates to the initial lookup
I'm working on a database right now for our school, similar to a directory. What I want to do is be able to look up what items a staff member has been issued and when/if they were returned. What I have right now is one sheet with all the information about the staff that looks like the one below. I want to create a separate sheet where you could look up a staff member by last name and can find all the information in the array relative the the specific cell looked up.
Last Name
First Name
Position
Building
Items
So, on the "lookup" sheet, I want to be able to input either Doe and have the look up return cells B2:E6, or if I input Smith it should return cells B7:D11.
I've been experimenting with Vlookup, hlookup, index, and match but haven't been able to get exactly what I want..
Index across multiple sheets returning multiple values
I am building a payroll workbook and I need to build a sheet that will allow me to choose an employee name and the formula will return all the data related to this employee. I found this forumla to do this: =IF(ROWS(...)<=...;INDEX(INDIRECT(...);SMALL(IF(...=...;ROW(...)-ROW(...)+1);ROWS(...)));"")
But in my workbook, the data is on multiple sheets . How do I adapt this formula to look into 12 sheets?
that data would be returned in order of the date of the pay.
file: Test formula on payroll_v3.xlsx
I have a table of data (say Column1 to Column 5) with multiple rows.
Column 1 to 4 will have the lookup values in multiple rows and Column 5 data should be picked up using vlookup or other lookup function.
I managed to somehow bring all these lookup values in (Column 1 to 4) in a single column in another sheet. I am now trying to use some lookup or other functions to match this single column and pick column 5 data in original sheet. Result i am expecting is lookup value in first column and next to it column 5 value.
It is basically a lookup wherein lookup value is spread over multiple rows and columns and result column is fixed. I tried using vlookup, but lookup value column and column number had to change every time when i moved from column1 to 4.
Trying to pull data from one workbook to another using Vlookup.
The worksheet has 7 columns (date, day of week, time or arrival, package, departure time, patron count and group name) I would like to pull all the data for a specific date in a seperate workbook.
I know I require a nested formula but cannot seem to get the variables correct:
I'm trying to get a value to return based upon three criteria, sales rep, compensation plan and calculation method.
For each sales rep (there are 20 reps), there is an option for one of five comp plans and for every comp plan, there are six calculation methods (these six methods are the same for every one of the five comp plans).
I know I need to use the Indes(Match()) set-up, but I'm having the darndest time figuring out how to set up the source matrix to do this right.
I have attached a file with an example of what i am looking for. The data in columns A and B are my original Data. There are multiple instances of e-mail address on the left but I need to bring in each data horizontally. I would like a formula to enter into E2:J6 to pull the information in.
Book2.xlsx
Actually I plan to create an eRequisition Form for our branch sites. My focus would be the consumable items of Lexmark printers. I want to create cascading drop-down lists based on data table (worksheet : All) as per attached. From lots of examples I've seen in this or other similar forums, I notice that in order to allow this cascading to work is by creating column with header name identical with the input in the 1st List. But I'm thinking, if I need to do that, then there gonna be hundreds or maybe thousands columns to create as the number of branches are expanding, so I think tht should not be practical.
I found examples that shows how lookup 1 value can return multiple values but I totally cannot think of a way to allow those multiple values to be returned as dropdown list rather than displaying all in rows of the worksheet.
What I need is that, in 1st list, upon selecting the branch, it'll populate all items related to the branch and when selecting the item, it'll populate brand/model list for the particular item only. The input in the dropdown list should not have duplicates. Been trying using pivot to do this with macro that enables auto refresh once any changes made in the table.
create this cascading drop-down lists just based on the table as per attached? I really want to avoid having to create extra tables to allow this cascading to work.
[URL]
I have been trying to find a formula for this but I have yet to find one that works for me.
Data;
English - United Kingdom, Czech, Spanish
UK - United Kingdom
Swedish
English - US
French
US
France
German
Portuguese
+8000 more various values
I am looking for a formula that can search for multiple values e.g. english, us, uk and united and then return the value "Yes".
I was looking for something that includes wildcard searches or contains so that it is not affected by upper or lower case but combining this with multiple searches was proving difficult.
From the following example:
A1 TAG B1 mileage
G10-1622 15246
G10-1622 15246
G10-1583 15246
G10-1622 28659
G10-1195 28659
G10-1622 28659
desired results
Enter tag in cell
G10-1662
Mileage
15246
15246
28659
28659
I would like to enter a particular TAG # in I5 and return all the mutiple associated data
See attached : tire2.0.xls
I am using the following formula:
=IFERROR(INDEX(drange,SMALL(IF(AND(qrange="SH",trange>30),ROW()-6),ROW(A1))),"")
to return the name (drange) of a person who was visited by "SH" (qrange), more than 30 days ago (trange).
There are faults in my formula, and if I'm honest I don't entirely understand it !
I need to return all of the names of people who were visited by "SH" more than 30 days ago. So I need the next value, and the next which is also over 30, by copying the formula down to the next cell and the next. My problem is that I get the first value (which is correct) and then the next ones are blank.
To make matters worse, the first value I get is only correct if i DON'T enter it as an array. If I do enter it as an array, I get the first row of the spreadsheet.
Using Excel 2003
I have attached sample sheet.
I need to populate the Rep Names looking up 3 Criteria (Client Id,Curr Cov Id,Dom Buy Grp Id) from the Table 1, either one matches the Rep Names has to populate.
The data has to be pasted on WIP_Sheet in different columns.
how I can keep a running total of information added to a different worksheetS. They would not always be the same peson ID so I would like to return a match on any unique ID number found on multiple worksheets and add their values on a master front sheet. i.e this becomes a running total of items purchased per ID number.
View 4 Replies View RelatedThis is a floowup to the issue that was originally posted as "Returning MAX/MIN values from multiple rows in a named range ". I marked that post as solved since I have worked through part of the issue and since have a different one.
View 2 Replies View RelatedI am using the below array formula in G2 (that I then drag across) to show the score for all the times "mike" appears. I would like to match all the times "mike" OR "red" appears, so that the value in K2 is "99".
=INDEX($A$2:$C$9999,SMALL(IF($A$2:$A$9999=$E2,ROW($A$2:$A$9999)-1,"hh"),COLUMNS($G2:G2)),2)
A
B
C
D
E
F
G
H
I
J
K
L
1
name
score
color
[Code] ..........
I have a table where the rows are conditions and the columns are experiment numbers, as an example below:
Experiment 1
Experiment 2
Experiment 3
Hardness
X
X
Solubility
X
X
Density
X
X
The table is fairly large. What I would like to be able to do is use a lookup/formula that will return all the experiment numbers a given condition is tested in. In other words, for a given condition (i.e., Hardness), which columns have an "X". Not sure if that can be done with a lookup or not or if there is another function necessary. I would like to be able to do it without macros though and also have it automatically update if I move the "X" around to different experiments.
I have a huge document that looks like this. This is only one part of roughly 2500 lines
blank
Original Budget
Previous Estimate
Estimate Actual
Actual Costs
[Code].....
My problem is that I need to extract Soft committ and actual cost for each element (this case its TPS658). What really makes the problem for me is that I only want cost for cost place 230, 250, 300, 350 (only 350 shown here). Not the total that is shown in the row for element name.
Is there a way to use a lookup formula to return all values of a given text, not just the value of the first listing of the text. In an attempt to clarify my already confusing request, if A5 on "worksheet1" is "Land" I want E5 on "worksheet1" to return the summation of values assigned to "Land" "worksheet2" "column B" any time "Land" appears on "Worksheet2" "Column A".
View 2 Replies View RelatedI'm trying to return the next unique item in the list of partnumbers. The count column indicates that there are that many instances of that part number. I then populate down than many to VLOOKUP the value "count" number of times. The formula I am using to get the MFR code compares the pn to the one above it. If it matches, I want it to return the MFR offset by the one above it for that part number.
Source data: (will alwyas be sorted by part number, then by MFR)
Part NumberStock num NAME MFR
BDEGHS55555544333RIVET,BLIND53551
BDEGHS55555544333RIVET,BLIND92215
BDEGHS55555544333RIVET,BLIND98996
BDEGHS55555544333RIVET,BLINDC4293
Results:
CountPart NumberMFRStock numNAME
4BDEGHS5555355155544333RIVET,BLIND
4BDEGHS5555355155544333RIVET,BLIND
4BDEGHS5555355155544333RIVET,BLIND
4BDEGHS5555355155544333RIVET,BLIND
I want the first vlookup part of the formula to return the NEXT MFR code in the source data.
how do i lookup values when there are multiple matches and i want to return values horizontally
eg
column A Column B
A 1
B 2
C 3
A 4
B 5
C 6
D 7
D 8
D 9
D 10
and the output should be like:
column A Column B Column C Column D Column E
A 1 4
B 2 5
C 3 6
D 7 8 9 10
I am trying to use a lookup to find the quantity of a certain fabric. However, more than one style uses the same type of fabric. Is there a way to do a lookup that retrieves multiple values?
View 1 Replies View RelatedI'm trying to do the next level of a v-lookup. I have a group of data with a text "flag" on certain rows. On my summary worksheet, I'm trying to do a lookup or a nested index function retrun all of the values with the text flag next to it.
I've been playing around with nested formulas and this is where I'm stuck. Here's what I came up with:
=INDEX($D$1:$E$9,(SMALL(IF($D$1:$D$9=$A$1,ROW($D$1:$D$9),ROW(1:1)),ROW(1:1))),2)
This only works for one row and not for the other rows. Maybe I'm going down the wrong path?
I have a giant lookup table with five columns. I have three variables, and I need to find the row in the lookup table where the variables match the first three columns of the lookup table. ie. Find the row where variable 1 matches the value in column 1, variable 2 matches the value in column 2 and variable 3 matches the value in column 3. If this row exists then return the value in columns 4 and 5 of that row. Otherwise, return a zero.
View 4 Replies View RelatedI am trying to enter a value in cell F1 by comparing the values in cells A1,B1 & C1. By using 'if, and, or' functions I can automatically input a figure for a limited number of values in A1 to C1. What I need to do is lookup from a database for say 10 possibilities in A1, five in B1 and 35 in C1 returning the correct number for the combination in F1.
View 4 Replies View RelatedI want to lookup values from one rawdata worksheet and have values appear on another sheet, but using 3 lookup values as the criteria. I cannot do this function with Vlookup as it only takes one criteria. I have looked for similar threads in this forum and came across an Index/Match function, but I cannot get it to work. I am attaching file. The data is in the 'rawdata' worksheet. I want values to appear in 'Input' worksheet, grey area using the 3 criterias (Dept number, GL number, and Seg code number).
View 4 Replies View RelatedI've search several posts and can't figure this out. Have sheet1 with facility number (A) and Description (B), monthly budgets (C-N) and yearly total at O. Each facility has 400+ GL so the only formula that has come close to working is this one: =INDEX('sheet1'!$O$1:$O$7695,MATCH(1,('sheet1'!$A$1:$A$7695=$D8)*('sheet1'!$B$1:$B$7695=G$5),0))
Basically "O" is the yearly number I want, "A" is the facility number and "B" is the Description (which is text). After searching several posts this one returned a result on the first facility, but returned NA on the rest. Also tried CONCENATE function with A&B in sheet1 which are equal to D10&G5 in sheet2. It returned the wrong information, I was looking for "1506Net Sales" and it returned for "1506Net Income".