I have a list of emails I need to merge into one cell and separate by commas. It looks like the follwing
A
1. xxx@xx.com
2. xxxx@x.com
3. x@x6.com
I need it to look like
A
1. xxx@xx.com, xxxx@x.com, x@x6.com
If I have, in one cell (call it D1):
EH,DR,HU
and in a lookup table on another sheet:
A B
1 ED T
2 EH F
3 DR G
4 HU H
5 SE E
6 YU E
I need to be able to lookup the values in D1 on the table and return the values in column B to a single cell (say E1), also comma separated...
eg...
F,G,H
I need to be able to select up to 5 different models in cell A1 from a drop down list then have cell B1 look these values up and find the volumes and then return the sum of the volumes - Cell B1 should read 130. There will always be one model selected but it will vary from 1 to 5 selections.
M1,M3,M4,M5
=10+30+40+50
M1
10
[Code]....
I have a single cell with 4 values in it all separated by commas and i would like to pull out each one separately. The number of characters in each value changes.
View 9 Replies View RelatedI am in need of a macro that will scan a worksheet row by row, noting the column names (found in I2 to AQ2) in a specific horizontal span of cells (I to AQ) that hold (any) data. The macro will then paste these column names in a designated cell on each corresponding row (always found in column F), separating the column names with commas.
I am trying to do this for multiple worksheets containing ~100 rows - the example attached is just a quick demo of what I'm hoping to achieve. Also, these worksheets are contained in one big workbook, so ideally I'd like to be able to run the macro once and have it apply to every sheet in that workbook (they all have the same layout - the only big difference is the number of rows). If the Total Scenes part at the bottom of the sheet is problematic in getting this to work, it's fine to remove it.
I have a table in the format below with about 3500 rows
Column A
Column B
0001
All vehicles, Retirements
0002
All vehicles, Retirements, Addition
0003
All vehicles, Retirements, Addition, Deletion from Y
I would like to change it to the following format:
Column A
Column B
0001
All vehicles
0001
Retirements
0002
All vehicles
0002
Retirements
0002
Addition
0003
All vehicles
0003
Retirements
0003
Addition
0003
Deletion from Y
I am currently trying to count data in one cell separated by commas. The spreadsheet attached will make things look a lot clearer.
The "CURRENT" table is what I currently have and the "IDEAL" table is what I would like (but not hard-coded). Sheet 3 is where the meaningful data is. So for example, E4 has "CC-12" which is "Open" and "CC-11" which is "Closed". Therefore I would want there to be a "1" in cell F4 and G4 and a "0" in H4.
Formula to put in F4:H5?
I have the following syntax in B1: "1,2,3,5,6". and I need VBA to take the very last number out of that list, and increase by four in single steps. For example: before the code: "1,2,3,5,6" and then after it "1,2,3,5,6,7,8,9." The code must be flexible, though, because it will be running within another Macro, and it must work whether the last number in the list is 1 digit ("...4,5,8"), 2 digit ("...34,35,36") or 3 digit ("...111, 113, 114"). Those three examples would be changed into "...4,5,8, 9, 10, 11" "...34,35,36, 37, 38, 39" "...111, 113, 114, 115, 116, 117".
View 4 Replies View RelatedI had sent 1000 emails to the my customers by using mail merge in word document. Now I need to reply to these 1000 customer again individual one by one. The message is the same, but I need these thing to be sent in individual.
View 1 Replies View RelatedComma separated data on sheet 2, look up info on sheet 1, return comma separated data on sheet 2.
Sample file attached : Book1.xlsx
I have a cell in a table containing user entered Comma separated values.
How can I process it so that user entered values can be referred to just like in an array? Is it possible to do something like cell.value[0]?
For example --
cell A1 has values red, blue, green. B1 has a formula that can refer to "red" in A1 by writing something like A1.value[0]
Is it possible to have a function return values to another cell reference than from the cell where it is called? Like a UDF called functionIndividualValues(InputcellReference, OutputCellReference) functionIndividualValues(A1, A2) meaning that the input string for the function is in A1 and the output should go to the cell A2.
I have a bunch of cells (could be varying amounts from 2 to about a 100). I need a macro which can find out how many rows in column A contain values and then i need to pick values from each cell in column A and put them in Cell B2 seperated by a comma.
eg.
Column A Column B
22 22,35,67,34,56
35
67
34
56
Column A could contain as many as 100 values.
I have a file with list of names in the attched file.They are not in the same format coming from the source in my company. I need only the names in the separete column without the dates and the commas. The text is not in the same format. Looking at the data, can someone help me make a formula to separate only the names from the the entry.
the data is huge and it takes lots of hours to clean this data.
I am attachign the excel file for reference.
Parsing values in a column. COLUMN A contains comma separated numbers, varying from possibly an empty cell, to a list of values between 1 and 12 separated by commas. I need to examine the column and place the number 1 in the column corresponding to the number. There will be no duplicates in COLUMN A. Is there an 'easy' way to do this. The table is part of a much larger spreadsheet.
COLUMN A
Team 1
Team 2
Team 3
Team 4
Team 5
Team 6
Team 7
Team 8
[code].....
I have a list of data in individual cells in one excel column thus...
Item 1
Item 2
Item 3
And I would like the data to read thus in one cell...
Item1,Item2,Item3.
Is there an excel function I can use to do this quickly and efficiently?
I tried too much to split one cell Containing more than one lineI need to put every line in different cell.
My small example can describe better ..
Cell(i,1)have 3 Numbers
Each Number Not Allowed Greater Than 10
Each Number In Cell(i,1) Will Be Added 1 In Cell(i,3) And Cell(i+1,3)....
How Can I Seperate Numbers And Make Three Variables To Run Macro
A
1,3,10
2,5,9
C
2,3,10
1,4,10
3,5,9
2,6,9
2,5,10
I receive a large spread sheet weekly, one or the column contains comma separated values (CSV), I need to separate those values 1 per cell. Maximum CSV is 5; I would need to get the output to 5 cells next to them, Example,
Source data
(A1) 10,11,12,13,14
Output needed
(B1) 10
(C1) 11
(D1) 12
(E1) 13
(F1) 14
(note, not all field contain 5 values, but they all contain at least one)
I have a column of contacts. Each contact has data spread out over many rows, most of which are blank. I would like all of the data spread out through the rows to be in one cell, delineated by commas (so I can import into another program).
Concatenating the cells works except that I end up with 20 commas for two strings of info.
Just so you understand I may have this:
Mary red blue yellow purple
Rob blue purple
Trey yellow
and I want it to look like this
Mary red, blue, yellow, purple
Rob blue, purple
Trey yellow
How should I go about this?
I am using the following VBA to add all cell data into one cell separated by a comma, but I need a space after each comma and and do not know how to edit the VBA. How to add a space after each comma?
Function Combine(WorkRng As Range, Optional Sign As String = ",") As String 'Update 20130815
Dim Rng As Range Dim OutStr As String For Each Rng In WorkRng If Rng.Text ","
Then OutStr = OutStr & Rng.Text & Sign End If Next Combine = Left(OutStr, Len(OutStr) - 1) End Function
I have a 28 or 30 columns excel with categories of products (color, size, price, etc...) and I need to have and extra column that has all the previous categories separated by semicolon ";"
Values could be numbers or words, mostly words
Price | color | size |...etc
50 | green | 24 |...etc
generated new column
50;green;24;... etc
If a column is empty then go to the next column, no zero value or two ";;"
I have 20.000 products, so 20.000 rows
When the entry in a cell is of the format e.g 3,4 is there any way to find the value 3 or 4 in that cell?
Attempts like:
Cells(i, 1).Value = variable (e.g variable=3)
or
Set cell_found = Cells.Range("A1:A10").Find(variable, lookat:=xlWhole)
do not find the cell with the 3 (or 4). The above work fine when 3 or 4 are alone in the cell. Is there anyway to find these values in the cell?
I need to count the number of values entered into a single cell seperated by commas for record keepin purposes. I would prefer not to use a macro since I am not an expert, but will if i must. Here is an example of what i am talking about:
User A will enter "109,108,107,106" into a cell in Column A
At the bottom of column A the Total will read 4.
Now User B enters "110,111,112,113" into the next cell in Column A
At the bottom of column A the Total will read 8.
I basically need to grab all the numbers going down in a row and get them into one cell in Text format with a comma between them.
A1
5293
5294
5295
5296
5299
5300
5301
5302
5303
5304
5305
B1
What I need in Text format
5293,5294,5295……
code1
code2
lookup Range1
lookup Range2
Return Value
Lookup
Multiple Return
[Code]....
I am trying to vlookup multiple value and return multiple values in one cell
How to have a validation list (drop-down) from a single-cell in which values are separated by a comma.
Example I have.
I have a wine list which have many categories of which
COL A / COL B / COL C
Wine Name / Wine Producer / Vintage
I wrote a VBA code to look-up duplicates names and give the producers that make them. The names of the producers will be in an invis cell as Comma Separated Values.
For example: Wine 11 is made by producer X and Wine 11 is made by producer Y. I will have X,Y in a cell which need to be in a drop-down menu when Wine 11 is selected.
I got everything done. The only issue is to get the list. The problem is that the drop-down list shows X,Y as a single component and not as 2 drop-down components. If i were to write down X,Y in the validation list tab, it will show it as 2 components but referring to the cell doesn't.
I am curious can we chose random number out of numbers if they are in one cell separated by coma
Example:
*A111, 12, 14, 18, 19
Is there any formula so Random number can be selected from cell A1
I have a cell witch contains CSV I need too look up all the values off a master list an out put the vlookup results in 1 cell
Example:
( SHEET 1/Cell A1)
10,11,12
(SHEET 2/ look up list)
.A .B
110101
211102
312103
413104
514105
(SHEET 1)
I need the output to show the following in Cell B1
101,102,103
want to match column A to column C and if they match take whats in column D and put it in column B.
Column C has multiple instances of Column A and I would like each instance's, which is the following column, value put into column b
I have one column of data. there are currently ~10k rows, but this will increase over time. each row has either a single value (example: pepsi) or a comma separated value (google,samsung) with up to 6 commas. instead of the rows looking like this:
pepsi
google,samsung
coca-cola
I want them to look like this in one column (preferably via a formula):
pepsi
google
samsung
coca-cola
I would like the above output to be a unique, alphabetized list.