I have attached a 97-2003 .xls file with data for multiple store locations on sheet 1, and the desired result on sheet 2. I am actually using excel 2007, but I dont think I need any special features that it provides.
I will try to explain the issue here without opening the attachment.
Here is an example of the Data on Sheet1
I want to do a loop where you can copy say A3 worksheet 1 then add another sheet naming the work sheet "A3" then copying A3 worksheet 1 to A1 "A3". After that looping to A4 to a new work sheet naming the work sheet "A4"copying the value to A1 "A4", etc...
Is there a simply way of doing this loop? I can probably fit my other coding into the structure.
Macro that can copy cells of data from about twenty five tabbed sheets in the workbook (subject to change) and compile them into one long worksheet (the first tab).
The cells to be copied will be fixed number of columns but variable number of rows. I only need copying of cells in one direction (from the tabbed pages to the compiled list), and I would like to keep the list automatically up to date or have a "refresh" button.
Here's an image to visually describe this:
I want to be able to copy a name from one sheet (Available Players), paste it to a cell in another sheet (Round 1 through Round 20). The cell that will be copied is fixed but the place where it will be pasted will be different and may be on a different sheet.
also i would like to change the color of the copied cell to "greyed" out or cut if it can not be greyed out. I have created a button and put in a macro that i created but have been having problems with it, generic 1004 errors that i can not figure out. i am attaching the document.
I have a multiple rows of data, but one column which is K has data like:
1020
1020
1020
1020
1020
1030
1030
1030
1030
1050
1050
1050
What i want my macro to do, is whenever that number in column K changes to copy all the data in row A thru K to a new sheet.
We have a company and need to automating workflow.
The Master sheet contains incoming mail details by customer. Each employee is assigned a set number of customers to respond to. We want the information on the Master sheet to filter to a specific employee assigned sheet. On the employee assigned sheet, once filtered, they are to provide updates in column E
Date
Reference no.
Name
Employee ID
16-Feb-12
S/S/1
[Code] ........
We need a macro that can filter customers' details to the specific employee assigned sheet based on the employee ID in the master sheet. For example, all customers assigned to DW (i.e with the 'DW' employee ID) filters into a sheet called 'DW'. Please note that the Master sheet is a continuous log updated daily. This macro must not duplicate information previously filtered once the employee enters a status update in column E.
Script Example.png (Picture)
Script Example.xlsx (Example Workbook)
I have a report that I pull that I pull fairly often that is in this format and shows which footage of products each store is getting (out of over 1800 stores)!
Above is the format that it comes back as. And here is a spreadsheet that shows what steps I take to find correct values in detail.
So each FTG has an ID# and Desc. The ID is in text format and each ID is seperated with a comma, no space. Description also. Date is seperate by a space and comma. Stores change footages a lot so I want to find out which footage is effective today (1/27/2014) For ex: Store 63 would have the 5ft effective right now because we are between 5/23/08 and 5/22/14. So each ID# and Ftg Description is in the same order as Date.
When I have hundreds of stores, it is difficult to go through and get each one (even with the way I've been doing it.) But my ultimate goal is to create a macro to put only the current footage ID#, Desc, and Date in Columns C,D,and E. I'm not sure even where to start with doing a macro.
I usually just find the store with most ftgs, count them, insert that many rows after ID and Description columns, then do a text to columns (comma, delimited), sort by 2nd date column (so they all come up top) and then manually go through them and delete unneeded columns once I have them all.
I need a Macro which pulls the data from different sheets of excel (which is not formatted properly) to Main Sheet. Also some of the columns will not have the same names, so macro should handle this exception as well.
View 8 Replies View RelatedHow to create macros. I need to copy a certain group of cells from one sheet to another, and then do it for x number of times. I'm just using the record function and now i'm lost. Here is the code i currently have:
Sheets("Mapping QTR2").Select
Range("B137:D230").Select
Selection.Copy
Sheets("ExpDB_Q1").Select
[Code] ....
Also, column C is blank. i would like to get the values from another list in the same workbook, say "branch list". I would like to populate Column C with one specific branch for each "batch", if that makes any sense...
I'am trying to create a document which automatically prints the next page on the same sheet.
I have created a spread sheet which prints the first 5 rows in the top of every page, but I can't figure out how to make excel print two A4's on one A3 side-by-side.
I need to print 2 pages on one sheet. Page 1 on top, page 2 below. I can get this to work on Portrait, but I need it printed Landscaped.
View 9 Replies View RelatedI have a macro which copies one cell into another on a different sheet, provided it has content.
I want to change it so that it copies to the different sheet but puts the value in the correct row of the other sheet.
For instance sheet 2, A1 =TEST, A2= TEST2, A3= TEST3
Sheet1. B7 = TEST2, A15= This is a test
I want the macro to copy the value in A15 and copy it to B2 on Sheet2, as this is the matching row
This is what I had originally:
VB:
If Range("A15") = "" Then
Exit Sub
Else
Range("A15").Select
Selection.Copy
[Code .....
I have the code below, which is auto-numbering in column B on sheet 2 (IR Register) and indexing down one row each time, ready for the next unique entry.
View 10 Replies View RelatedThe text disappears when I want to correct it (protected sheet). see the discription of the problem in the attachment with figures.
View 3 Replies View RelatedI need to have cells from sheets to automatically transfer to a separate total sheet...
So in other words for every tab/sheet I have...I need cell B10, once populated, to automatically transfer to a designated cell on a separate Total tab/sheet...
I tried =Sheet2!B10...but when I copy it into the next cell it reads...=Sheet2!c10...what I need is for the sheet to change...but the cell to stay the same...
This Macro works fine to copy data from multiple sheets into one master sheet, but it is also copying the formula. How can I change this Macro so that it is copying and pasting VALUE only?
Sub Combine()
Dim J As Integer
On Error Resume Next
' work through sheets
For J = 4 To Sheets.Count ' from sheet 3 to last sheet
Sheets(J).Activate ' make the sheet active
Range("A10").Select
Selection.CurrentRegion.Select ' select all cells in this sheets
' select all lines except title
Selection.Offset(1, 0).Resize(Selection.Rows.Count - 1).Select
' copy cells selected in the new sheet on last line
Selection.Copy Destination:=Sheets("Combined").Range("A65536").End(xlUp)(2)
Next
End Sub
I am trying to write some code that is linked to a Command button. The code in the command button is in my workbook called "MF Consolidated ACTUAL DAILY REPORT - Dev.xls" but then I have another workbook called "MF BANK EXPOSURE SUMMARY.xls" that I want to do some work with - namely delete blank columns and it is here that I am having the problem.
My problem is this: my code module is contained in my project "MF Consolidated ACTUAL DAILY REPORT - Dev.xls" and the columns that I want deleted are in the "MF BANK EXPOSURE SUMMARY.xls". Now even though I believe I have activated the "MF BANK EXPOSURE SUMMARY.xls" workbook the action, that of deleting the blank columns is performed on the "MF Consolidated ACTUAL DAILY REPORT - Dev.xls" workbook. Why?? Here is the code that I am using:
Sub Commandbutton()
'ASK FOR DATE AND SET IT IN THE REPORT
Workbooks("MF Consolidated ACTUAL DAILY REPORT - Dev.xls").Worksheets _
("Seg and Non Seg Bank Summary"). Range("I1") = Application.InputBox("PLEASE ENTER REPORT DATE IN THE DD/MM/YYYY FORMAT")
'ACTIVATE MF BANK EXPOSURE SUMMARY
Workbooks("MF BANK EXPOSURE SUMMARY.xls"). Sheets("Seg and Non Seg").Activate
Dim iCol As Integer
Dim Isheet As Integer
With ActiveSheet.UsedRange................
Hi all! I'm hoping someone can help me as I'm trying to complete this for work ASAP. Here's the story. I want to automatically fill out the Monthly Log sheet using the information provided on the "Full Staff" sheet. If E9:E227 in the Staff sheet is listed as "CO", I want to copy the corresponding cells over to the corresponding cells in the Monthly Log Sheet. Also, I want it to automatically paste the information in the next available row (say rows 1-15 are being utilized, I want it to post in 16). Can anyone help?
View 6 Replies View RelatedI am trying to write a macro to copy an entire sheet's content into cell A1 for each sheet in a workbook.
I am running into the problem of not being able to copy many cells into one.
Please assist me in figuring out a macro to copy a column or entire sheet to a single cell (preferably iterating through each worksheet in the workbook).
I have a folder full of uniformed web pages ( name and design) and I was wondering if it's possible to create a macro that will open up each page, copy specific data from each page, and paste it into an Excel 2002 spreadsheet. Unfortunately, my skills in VBA are very limited at best and I'm not sure if this is doable or is it something I'll have to go into each page and copy the data.
View 3 Replies View RelatedI have one sheet with 25 tables in it, And i want to extract the whole row from this sheet to another sheet based on values ( Office1, Office2, Office3, Office4 ) if appeared in thrid column "C".
- the 25 tables created on the 1st sheet to be in the other sheets as formatted as well.
- once "Office1" appeared in the original sheet in the 1st table, Action : copy the whole row to sheet named "Office1"at the top row in the first table.
- once "office1" appeared again in the original sheet in the 1st table, Action: copy the whole row to sheet named "Office1"at the 2nd top row in the first table.
- once "office1" appeared again in the original sheet in the 2nd table, Action: copy the whole row to sheet named "Office1"at the top row in the 2nd table.
- and so on, the same with other 3 remains sheet.
EXAMPLE: Complete Sheet called "Day1". When day1 is complete you click on button and it then copies itself and creates and renames new sheet to "Day2", then when "Day2" is complete you click on button and it then copies itself and creates and renames new sheet to "Day3", and so on and so forth to "Day30".
View 9 Replies View RelatedI guess this is a simple one but I am not sure of the best way to do it,
I have number of points recorded for everyday in an excel sheet where first column represents date, second column represents group third column represents line and fourth column represents point as shown in the example below
3 19 2222 4324
2223 4325
2224 4326
2225 4327
2226 4328
"3" and "4" represent the 3rd and 4th day of the month, "19" represents the group and 3rd and 4th columns rest are line and point numbers recorded (2222 is first line of day 3, group 19 and 4324 is first point of line 2222 of group 19 on 3rd day and so on....).
I need a macro (or formula) to copy the cells of the last day written in the sheet up to the last row to a new excel sheet, reformat them so that first column has the word "Date" in its first cell, second column has the word "group" third has "line" and fourth has point.
so in the example mentioned here I need it to copy the cells of day "4" including the group, line and point numbers and format them in the new sheet so that first column has "DATE" then 4 for the rest of the rows, second column has "group" and 19 in the rest of the rows, 3rd column has "Line" and all line copied up to last row, 4th column contains "point" and all points copied.
The last few days I have been trying to figure this out with no luck whatsoever. I am using Excel 2010 32-bit with power query on a Windows 7 64-bit computer. I was going the use the html creator, but the dl link was down and I had to use screenshots.
I have a sheet titled "LeadSheet" that contains multiple data blocks of information (around 20). I have attached 2 examples of these data blocks and 2 examples of results needed below. I tried to create them so they would fill in the gaps of my explanation.
All of these data blocks are 7 columns wide and vary in row size from 10-250. The blocks of data all have titles on the 5th row, but are not headers, and then data beginning directly underneath. I hesitate calling them ranges because I only selected one data block as a range and named it "lead1" and then stopped not knowing if I was headed the right direction.
I first tried to create a table out of the range, but was unable to do so because the "Name" column is an array. The phone and address columns are populated by VLOOKUP. And although the images show the column names as the same for name, phone and address theyare actually different, like name-firm1, name-firm17,address-firmxyz, etc, etc. I not putting that in the images. The "Option 1", "Option 2", "Option 3" and "Option 4" columns are generated using a =IF formula.
I have another sheet titled "ResultsSheet".I'm needing a way or code to copy entire rows from the multiple data blocks/ranges in the "LeadSheet", and paste it in the"ResultsSheet", based on any value occurring in any of the"Option" columns within the individual data blocks/ranges along with appending the "Option #" title to either end of the copied row.
The "LeadSheet" is constantly being updated so information is being added and taken off all the time. That being said, is there anyway to make it update as soon as the "LeadSheet" does or on a timed interval so that the"ResultsSheet" is always up to date. And also prevent it from continuing to re-copy over duplicates of information that has not changed?
Ifthe "Option #" result is the exact same percentage then the order does not matter between them.
Ifwithin the same data block/range both "Option" columns have data it is usually because of some error and is most likely bad datathat does not need to be copied. i.e. "Steven Seagal". If that makes this task much more difficult I can live with it.
If within two or more different data blocks/ranges the same name and info appears that if fine because the "Option #" will always be different. i.e. "Chuck Norris".
I am also trying to make the "ResultSheet" ordered from largest percentage to lowest, but I assume that should be done once the data is on the "ResultsSheet". No headers or titles are necessary on the "ResultsSheet"
Data Block example 1:
Data Block example 2:
Example, I have a sheet named DATA1, I want to add a new worksheet, copy a certain range from the DATA1 sheet to the new sheet and rename it the same name DATA1 and delete the old DATA1 sheet.
Also, the sheetname will be unknown, the macro must get the sheet name first.
I have an attendance file w/least 30 sheets. 29 of the sheets are for each separate group. The other sheet is the main one where I need to collect information like "total participants in attendance" and "total members in group" Then I divide those two and get the percentage of attendance.
The sheets containing the individual groups info are set up like this... (1=they were in attendance)
GROUP 1
Name / January / February / March/
Jess________1________0________1
Ryan_______1________1________0
Joe ________1________0________0
----------------------------------
total P ____3________1_________1
members___3________3_________3
% _______100_______33________33
The main sheet looks like this
Group / Jan. Participation / Jan. Member total/
Grp 1 ________3_____________3
Grp 2 ________8_____________10
Grp 3 ________7_____________10
---------------------------------------------
_____________18____________23
% total-__________________78.2%
I know I can manually go through and link the sums of participation and total group size into the main sheet, but I have a lot of workgroups and need to do this every month, is there an easier way? I am willing to change the set up of the sheets.
I am currently using a macro to copy a sheet from a closed workbook in to my current workbook. However this copying is based on the sheet name. At present when I run the following code
View 11 Replies View Relatedtrying to copy data from multiple sheets to one single sheet. I am pretty sure this is possible. The problem I am running into is that the number of sheets at any given time is dynamic. The numbering of the sheets is from 000 to 999 (they must be a three-digit code). The other issue I am having is I only want to copy the rows in each sheet that have an "x" in column "A". Also, the row in which the first "x" occurs can differ from sheet to sheet. I have attached a copy of the spreadsheet that indicates how the spreadsheet is layed out.
View 13 Replies View RelatedI have multiple .xls sheets in a folder. C:Documents and Settingsu369875DesktopProject stuffTestin Save_ASCompleted History. And need to copy the data in all of them and paste them into a new sheet (one main sheet) in this folder...........
View 2 Replies View RelatedI recieve a daily spreadsheet with ~25,000 rows of data and is 4 columns wide. Each day I need to break the data equally up into 19 or 20 different sheets within the same workbook. This is very time consuming as I need to copy the first ~1,000 rows and paste it into the first sheet, then I need to take the next ~1,000 rows and paste it into the second sheet, and so on.
I have attached a small example with desired output. In my example, the raw data file contains 19 records. For these 19 records, I need to distribute the records evenly between 5 individual sheets. In this case, each sheet will contain 4 records or less.
