I have one sheet with 25 tables in it, And i want to extract the whole row from this sheet to another sheet based on values ( Office1, Office2, Office3, Office4 ) if appeared in thrid column "C".
- the 25 tables created on the 1st sheet to be in the other sheets as formatted as well.
- once "Office1" appeared in the original sheet in the 1st table, Action : copy the whole row to sheet named "Office1"at the top row in the first table.
- once "office1" appeared again in the original sheet in the 1st table, Action: copy the whole row to sheet named "Office1"at the 2nd top row in the first table.
- once "office1" appeared again in the original sheet in the 2nd table, Action: copy the whole row to sheet named "Office1"at the top row in the 2nd table.
- and so on, the same with other 3 remains sheet.
I have attached a 97-2003 .xls file with data for multiple store locations on sheet 1, and the desired result on sheet 2. I am actually using excel 2007, but I dont think I need any special features that it provides.
I will try to explain the issue here without opening the attachment.
I need, I do not know Visual Basic, so I need something in simple Excel format that I can use before I am able to take the training (upon reading more threads, looks like VBA is just the editor used to create a macro where I can copy and paste in code text from your suggestions? I think I can handle that).
I need to condense multiple tables into one master table, and then perform calculations on those entries. Each table contains three columns, but after being manually pasted -- as I am doing currently -- into the condensed worksheet, there'll be two or three additional columns based on calculations from the entries. The Workbook does currently contain 2 worksheets that do not contain data in this format, so please share code that could exclude those? I am fine with every so often manually applying a formula on the last worksheet that says something like,
look in SH1 A2:C300. If entire row is not blank copy over contents, if blank move on to SH2, etc etc. Since I'm a newbie I imagine there are much more efficient ways to do this. I may be a little shaky on the VBA but surely I can copy and paste.
many times i am confrunted with excel files containing one sheet that has many tables on it. i need to print each table so that it fits on one page, but these tables are not formatted so that they fit, therefore i need a fast way to make each table fit on 1 printed page, no matter how big it is or how it is centered on the page size from page layout(many times the table is bigger than the page layout size). i tried selecting each table holding down ctrl and then hitting set print area, but most of the times this doesnt work, i still get part of the first table and the begining of the second table on the second printed page and so on, which is not good.
trying to copy data from multiple sheets to one single sheet. I am pretty sure this is possible. The problem I am running into is that the number of sheets at any given time is dynamic. The numbering of the sheets is from 000 to 999 (they must be a three-digit code). The other issue I am having is I only want to copy the rows in each sheet that have an "x" in column "A". Also, the row in which the first "x" occurs can differ from sheet to sheet. I have attached a copy of the spreadsheet that indicates how the spreadsheet is layed out.
I have multiple .xls sheets in a folder. C:Documents and Settingsu369875DesktopProject stuffTestin Save_ASCompleted History. And need to copy the data in all of them and paste them into a new sheet (one main sheet) in this folder...........
I recieve a daily spreadsheet with ~25,000 rows of data and is 4 columns wide. Each day I need to break the data equally up into 19 or 20 different sheets within the same workbook. This is very time consuming as I need to copy the first ~1,000 rows and paste it into the first sheet, then I need to take the next ~1,000 rows and paste it into the second sheet, and so on.
I have attached a small example with desired output. In my example, the raw data file contains 19 records. For these 19 records, I need to distribute the records evenly between 5 individual sheets. In this case, each sheet will contain 4 records or less.
Each sheets has data starting row 14 and column B with row 13 being column Headers.
I want to copy data from each sheet, having column headers suppose A, F & G in to a single sheet. The position of column headers I want to copy are different in each sheets
Means macro will go to sheet1 first, he will copy data from column headers A, F & G and paste in new sheet suppose main.
then macro will go to sheet2, he will copy all the data from column headerA, F & G and paste it in main sheet after the last used row and so on.
I have been trying to make a code that copies all the data in A2:K50 in all the sheets (about 32 of them right now) and paste that information in 1 sheet (Master List). The code does work but for some sheets it only copies the first 2 or 3 records. Also, this code puts the name of the sheet the data came from but for the first 2 records in puts in the Master List its pasting the wrong Sheet name.
Sub SummurizeSheets() Dim ws As Worksheet Dim lastRng As Range
Using Excel 2010. I'm writing a macro that sets up a workbook to be used for estimating at the beginning of a project. In the code I need to create multiple tables (formerly known as "lists") in the workbook. Then later in the code I need to refer back to those newly created tables. Currently, the code that creates the table is part of a loop that creates the table on many different worksheets. The problem of course, is that I have to name the Table, and then it won't create a table of the same name on the next sheet. Then, later in the code, I need to make adjustments to the table that was just created before looping to the next sheet.
Is there a way to create a table without giving it a constant name? Or by giving it a name that builds off of other info in the sheet? For example, I would be good with the naming the table after the sheet name: "Sheet1_Table" or such.
Code: Sub Auto_Open() ' Dim sht As Worksheet If Range("A1") = 1 Then
I am working on a project to automate the import of data and fixing the formatting.
The data contains the date in column A and time in column B. The time is in increments of 15 min for each day. The rest of the data is in columns C:F. Some of the dates don't have all of the times within the day (so instead of 96 rows of data per day, there maybe 80 rows). I have a second sheet of just dates and times that has the correct amount of rows for each day. What I need to do is have the rows data that matches in both the date and time column from sheet 1 copied over to the corresponding date and time on sheet 2. Blank data rows on sheet 2 are fine. I have found some stuff on .Find, but the stuff I found was for specific searches.
Example
Sheet 1 7/27/13 12:00 AM 1 2 3 4 7/27/13 12:15 AM 5 6 7 8 7/27/13 01:00 AM 9 10 11 12
Sheet 2 7/27/13 12:00 AM 1 2 3 4 7/27/13 12:15 AM 5 6 7 8 7/27/13 12:30 AM 7/27/13 12:45 AM 7/27/13 01:00 AM 9 10 11 12
This is my basic setup, each piece of equipment will have more than one routine to be performed:
Equipment Type Make Model Serial Location
To Be Performed Frequency Last Performed Performed By Next Due Date R1
[Code] ..........
I want to track changes on "Last Performed" and "Performed By" and, if changed, copy both values to a separate "log" sheet. In total, there could be up to 10 routines for each peice of equipment. That means I would need to track 20 columns for changes. I would like this check to be done on save because that ensures that the user is satisfied with their changes and keeps the log from being flooded. And lastly, it needs stored in the log sheet in a way that I can identify which piece of equipment it was for and which routine was done.
Im trying to compile them all on the same sheet (Main Sheet). But each sheet is NOT the same. I need to choose what Columns needs to be copied (I can use one macro for each tab if needed)
For example I need Sheet1, Columns (A,C,E,G,S) copy that and then go to (Main Sheet) and paste in the next blank line (column A)
Workbook1 has only 1 sheet (Sheet name is Final) with multiple rows Tiger,Lion,Goat etc..
Workbook2 has multiple sheets (Tiger,Lion,Goat .... so on)
Each sheet Tiger, Lion, Goat has different no of rows but same no.of coloums.
I want to copy the data from all the sheets in Workbook2 to one sheet Workbook1
ie., once i execute my macro the final output in Workbook1 should contain Tiger under that all the rows from sheet tiger(Workbook2),Goat under that all the rows from sheet Goat(Workbook2) ,Lion under that all the rows from sheet Lion(Workbook2).
Here rows should be inserted in Workbook1 and in these inserted rows we should copy data from respective sheets of Workbook2
We have a company and need to automating workflow.
The Master sheet contains incoming mail details by customer. Each employee is assigned a set number of customers to respond to. We want the information on the Master sheet to filter to a specific employee assigned sheet. On the employee assigned sheet, once filtered, they are to provide updates in column E
Date Reference no. Name Employee ID 16-Feb-12 S/S/1
[Code] ........
We need a macro that can filter customers' details to the specific employee assigned sheet based on the employee ID in the master sheet. For example, all customers assigned to DW (i.e with the 'DW' employee ID) filters into a sheet called 'DW'. Please note that the Master sheet is a continuous log updated daily. This macro must not duplicate information previously filtered once the employee enters a status update in column E.
I want to a macro or a function that can search for the value which corresponds to a cell and copy it to another cell. please refer to the attachment for more detail.
I have an excel file that contains around 8 sheets, each have a table that contains data. I want 2 master sheets that can automatically update itself if i enter data in any 1 of the 8 sheets.
master sheet 1 = summarized sheet that contains lesser columns with only major details. master sheet 2 = contains all columns of all the 8 sheets.
the 8 sheets have unique names and i want those names to be in a drop down list in master sheet (summarized ) so i can select which ever sheet i want summary from.
Also i used tables for filtering data as i find it easier to track records from filter.
I have to use data tables to calculate Net Present Value (NPV) by altering specific variables.
My NPV is the result of a series of calculations to ultimately arrive at a cash flow figure and then apply the WACC (average cost of capital)
I understand how to use data tables But for the life of me i cant figure out how im going to tell excel that im changing for example wage costs and not fixed assets when trying to asses the NPV sensitivity
My sheet and calculations are all set up
I've done it manually by altering the figures on the Inputs and Data Sheet.
My NPV calculation is on the Workings and calculations sheet.
The data tables i have done manually are on the Inputs and Data sheet.
I am trying to plot multiple tables on the same line chart in Excel 2007. I have a list of X and Y values for Table 1, Table 2, Table 3 etc.
However the size of the tables are not the same for each table. For example, Table 1 might have 200 X and Y values, Table 2 might have 175 X and Y values, Table 3 might have 105 X and Y values, etc.
So when I plot these data tables on one line chart the individual plots are off center. They should all be centered at 0.
I need to insert a blank row between each row of data under my headers (not the immediate row) until I reach the end of the particular table. I then move down to the next header and repeat the process.
Currently I am going back and forth between an excel document and a word document cutting and pasting values from the excel spreadsheet into tables in word. The task is a regular occurance therefore I wish to create a Macro that can automate this procedure. Both the excel and word documents are fixed templates therefore once a Macro is created it can be applied to all future work of similar nature.
Each table in the word document contains 6 rows of values in a single column. The excel data is arranged in a table that is 6 rows by x number of columns (how ever many sets of values there are for the particular job) therefore x determines how many tables must exist in the word document. I move between the excel and word document cutting and pasting each column into each table. This is not so time consuming if x=10 however on occasion x=100+ and it does take time.
I'm working on a national survey with valuable data from students. The plan is to turn around, 100 different reports to the departments with their respective students.
The issue that I have is creating multiple tables from multiple sheets in excel into a word table, any way of automating it.
What the tables look like in excel:
What I want them to look like in word, with a chart if possible:
I realize that I can just copy and paste easy table into word from excel and with a few clicks of a button, get what I want. But i'm looking for something to automate and simplify this process. There are about 300-400 variables that I need to crosstab with certain demographics.
If it matters any, I bought a software package (Q Market Research) but it doesn't make the tables look exactly how I want them to look. The data is from SPSS, those tables are flat out.
I have multiple pivot tables with different data source. I wish to have one slicer which control all the pivot tables. I would have one common colum for all the pivot tables which is the one i wish to control for instance the person in charge. Note that all my pivot tables are from different data source. how to do it?
The spreadsheet is comprised of 4 sales data sheets, one for each store. Each of these sales data sheets runs several pivot tables (One for dept sales, one for waste, one for sales on Selected UPCs etc) and I used to have 1 copy of each pivot table for each store (ie 24 pivot tables). Now I have found a way to have only 1 copy of each PivotTable which changes based on which store is selected using the following code:
I am trying to combine sorted data from 2 worksheets to a new work sheet to process further. I have one worksheet with order number, part number, order qty but with different delivery dates. On another worksheet, I have the order number too, part number, the qty delivered. The qty delivered is not always the same each delivery.
My aim is to find out how many are already delivered under a certain purchase order and the balance of undelivered parts.
I used pivot tables to sort out the data but I am stuck here not knowing how to extra the sorted data from the pivot tables to the 3rd worksheet. I will need to match the order number and the part number.
I am trying to generate several pivot tables from one data source table. I have successfully created my first pivot table (A date field, and a water storage facility level reading) and subsequently a graph from this. I have worked out that I need to group my dates as I am supplied a daily reading, but only need monthly average. All worked great.
Now i need to create more pivot tables and graphs. The next one I want is to create one grouped by years. But when I create this new pivot table and change the grouping of the date field to yearly, it also changes the grouping on my first pivot table, which is undoing my work.How to tell excel that these pivots are independent, and I don't want them changing in unison? See screen grab of my source data and where I am up to...
Microsoft Excel - 401027_0100.00_0221.00.csv_2014-03-10_11-41-35.jpg
I'm trying to create some vba code that will go into other .xlsx documents, pull all cells with a value in the first 30 columns and then return them as a table. Basically each work crew has a .xlsx spreadsheet containing their schedule and I am trying to bring them all together into one nice little package. If I go to import from external sources then click XML data, navigate to the folder they are in and them click show all files and pick my spreadsheet it imports nicely. Then I go to the next blank cell in column "A" and repeat for the 4 crews. Now I can filter by each crew but all 4 are visible on a single page as a table. I recorded a macro that shows everything I did, but it is not dynamic (the .xlsx source files name changes based on the month) I'm running XP sp3 with Excel 2010
Is there a better or simpler way to do this? The tables don't need to be forever linked to their previous spreadsheets so if copy/pasting is a better way than I am all for that as well.
