I need to have cells from sheets to automatically transfer to a separate total sheet...
So in other words for every tab/sheet I have...I need cell B10, once populated, to automatically transfer to a designated cell on a separate Total tab/sheet...
I tried =Sheet2!B10...but when I copy it into the next cell it reads...=Sheet2!c10...what I need is for the sheet to change...but the cell to stay the same...
I am looking to write a macro that will take 5 sheets and paste the rows into 1 summary tab. The names of the sheets are, CMH, ORD, JFK, LAX, and MIA. There are other sheets in the book but I don’t want any information from them. The five sheets have the same columns. I want to paste only the rows of the last entry for Origin and Forwarder. I have enclosed an example. So in rows 2 & 3 we have the same Origin-Forwarder combo but I only want the most current which would be row 3. Some Origin-Forwarder just has one entry so of course I would want that one.
View 7 Replies View RelatedIs it possible to make multple worksheets from a selection of multiple cells?
This would mean a selection of 10 cells would generate 10 sheets titled with the cell conent.
I want to do a loop where you can copy say A3 worksheet 1 then add another sheet naming the work sheet "A3" then copying A3 worksheet 1 to A1 "A3". After that looping to A4 to a new work sheet naming the work sheet "A4"copying the value to A1 "A4", etc...
Is there a simply way of doing this loop? I can probably fit my other coding into the structure.
I have attached a 97-2003 .xls file with data for multiple store locations on sheet 1, and the desired result on sheet 2. I am actually using excel 2007, but I dont think I need any special features that it provides.
I will try to explain the issue here without opening the attachment.
Here is an example of the Data on Sheet1
I have the code below, which is auto-numbering in column B on sheet 2 (IR Register) and indexing down one row each time, ready for the next unique entry.
View 10 Replies View RelatedThis macro helps me create a blank worksheet and automatically names it from the list in column A. Unfortunately, it adds the worksheets to the left of my 'master' sheet called "Tab Names". When I try adding "after" when it adds a new sheet, I keep getting a "compile error: Expected: end of statement". I am positive you will know what steps I'm missing.
' Vendor List Subroutine to
' Open New Worksheet called Tab Names worksheet
' With data from Tab Names
' Rename sheet to name from list and start again
' For all names in list
Sub NewTabsFromList()
Dim cCell As Object, i As Integer 'Two variables cCell (current Cell) object and i (standard counting integer)
Cells(1, "A").Select 'Ensure that we start each time at the top of the worksheet
Application. ScreenUpdating = False 'Turn of screen updates whilst macro is running
For Each cCell In Range(Cells(1, "A"), Cells(1, "A").End(xlDown)) 'Will run our code through each cell with text
Set NewSheet = Sheets.Add(Type:=xlWorksheet) 'Add new worksheet
NewSheet.Name = "Tab Names Worksheet" 'rename worksheet
Sheets("Tab Names worksheet").Name = cCell.Value
Next cCell
End Sub
I have a lot of sheets, in my workbook. It keeps expanding, as I add them. How do I make multiple rows of sheet tabs, to keep from having to scroll across all the time?
View 4 Replies View Relatedis it possible to Copy Rows to a multiple tabs on a New Worksheet using a start date and end date as reference?
I have a button (named Draw Report) on the Raw Data xls. should copy tickets uniquely on a new workbook, by uniquely - no duplicates on the new workbook on a given date range.
Will it be possible to separate them into tabs according to values under Assigned to (Transaction 1, 2, 3)?
Could we also copy the exact 2nd worksheet (Report) on the Raw Data xls on the Output.xls?
The Output would contain 4 tabs: Report, Transaction 1, Transaction 2, Transaction 3)
I have a spreadhseet with lots of sheets. Instead of scrolling across to see ones out of view, it would be really neat if the view of the sheets could be stacked to show them on multiple rows.
Can this be done?
VBA is an option if I need to go down that route.
Is there a posibility that using VBA i can group sheettabs (Sheet 1, Sheet 2, Sheet 3) into 1 single master tab (ex. "MASTER") ?
Since I will be having 20 sheets in a excel file I would like to group them together.
I am creating a spreadsheet to track customer data and need to reference certain cells in individual customer tabs to a master sheet that contains every customer. Each customer will have his own tab, each tab having the same layout, and each client will also have their own row on one master sheet within the same workbook.
My question is, is it possible to reference the specific cells in the clients individual tab to the master list once, and then everytime I copy a new client tab, the referenced cells in that tab are immediately referenced to the corresponding client (new) row in my master sheet within the same workbook?
I have an attendance file w/least 30 sheets. 29 of the sheets are for each separate group. The other sheet is the main one where I need to collect information like "total participants in attendance" and "total members in group" Then I divide those two and get the percentage of attendance.
The sheets containing the individual groups info are set up like this... (1=they were in attendance)
GROUP 1
Name / January / February / March/
Jess________1________0________1
Ryan_______1________1________0
Joe ________1________0________0
----------------------------------
total P ____3________1_________1
members___3________3_________3
% _______100_______33________33
The main sheet looks like this
Group / Jan. Participation / Jan. Member total/
Grp 1 ________3_____________3
Grp 2 ________8_____________10
Grp 3 ________7_____________10
---------------------------------------------
_____________18____________23
% total-__________________78.2%
I know I can manually go through and link the sums of participation and total group size into the main sheet, but I have a lot of workgroups and need to do this every month, is there an easier way? I am willing to change the set up of the sheets.
1. The idea is that the macro will start on sheet1, look at column "Jon", copy the values down to the last active cell as well as the dates and paste special values and transpose them onto the "Jon" tab starting in B8 and B9. Each day all of the dates and values on the "Jon" tab should be overwritten with the data on sheets1 and 2, instead of it being cumulative.
2. The macro will then go to sheet2, look at column "Jon", copy the values to the last active as well as the dates and paste special values and transpose them onto the "Jon" tab starting in B18 and B19. Each day all of the dates and values on the "Jon" tab should be overwritten with the data on sheets1 and 2, instead of it being cumulative.
3. The macro would then save the "Jon" tab as a separate pdf in a specified location.
4. The process would then repeat for "Mike" and "Paul". Each day the number of columns can fluctuate, so it may be 3 one day (Jon, Mike, Paul) and 8 the next. The number of rows also may vary from day to day, and column to column.
I have attached a workbook that contains the data for the scenario above as well as the output (Jon, Mike, Paul tabs). Ideally there will not be new tabs that remain for Jon, Mike, Paul, just a default tab (e.g. "output" tab) that would receive the transposed data from the columns for Jon, Mike, Paul. I put all 3 in the workbook so you could see how each of them would output.
I have a summary sheets for my report that my department no longer wants to use. Rather they want to have a longer, more detailed version of the same thing, but rather than 1 sheet summarizing it all, they want it 1 widget, 1 sheet.
How can I have my Checksheet tab (see upload), turned into multiple tabs. In the specific example I provided, there are 10 widgets, so therefore I created the result in 10 tabs.
How can I get a macro to turn Checksheet tab into the next 10 tabs (see excel upload)?
I have attached the excel sheet of how my summary sheet is, and how it's supposed to look like.
Let me explain this as best I can:
I have an excel file with multiple tabs on it. Each tab has the exact same format with different numbers. On the last page I want to add cells from each tab and have the sum go to a cell on the last tab.
I have a workbook with four tabs or four sheets.
Tabs 1, 2 and 3 have a column of data (Column A) on each sheet. They all start from the same cell. Each cell of data are just numbers. The column (an array) of data will not have blanks between.
But, they are not the same number of data. They vary.
Meaning, Tab 1 may have 15 numbers (A1 to A15), Tab 2 may have 20 numbers (A1 to A20) and Tab 3 could have 5 numbers (A1 to A5). Each iteration of the workbook may have different number of data in the A column on these tabs.
Now on Tab 4, I want combine the data from all three tabs into one column (in column A).
So, Tab 4 has a column A with data from Tab 1 copy and pasted to (A1 to A15) as values, then (A16 to A35) have Tab 2 data copy pasted as values and (A36 to A40) have Tab 3 data copy pasted as values.
Basically, the macro on Tab 4 has to count the number of rows on each Tab that are populated with data values and figure out to copy all the data on Column A from each three tabs and paste the data value into the Tab 4 in one column of data (in values).
I have a summary page that includes the titles for each tab within the excel 2003 workbook. I want to use the names of the tabs in the summary page and create it into a formula to lookup fixed cells within the various tabs. Sorry for not uploading an excel doc but I was at work earlier and the thread did not load for some reason, so I am reposting it.
View 3 Replies View RelatedI want to be able to copy a name from one sheet (Available Players), paste it to a cell in another sheet (Round 1 through Round 20). The cell that will be copied is fixed but the place where it will be pasted will be different and may be on a different sheet.
also i would like to change the color of the copied cell to "greyed" out or cut if it can not be greyed out. I have created a button and put in a macro that i created but have been having problems with it, generic 1004 errors that i can not figure out. i am attaching the document.
The last few days I have been trying to figure this out with no luck whatsoever. I am using Excel 2010 32-bit with power query on a Windows 7 64-bit computer. I was going the use the html creator, but the dl link was down and I had to use screenshots.
I have a sheet titled "LeadSheet" that contains multiple data blocks of information (around 20). I have attached 2 examples of these data blocks and 2 examples of results needed below. I tried to create them so they would fill in the gaps of my explanation.
All of these data blocks are 7 columns wide and vary in row size from 10-250. The blocks of data all have titles on the 5th row, but are not headers, and then data beginning directly underneath. I hesitate calling them ranges because I only selected one data block as a range and named it "lead1" and then stopped not knowing if I was headed the right direction.
I first tried to create a table out of the range, but was unable to do so because the "Name" column is an array. The phone and address columns are populated by VLOOKUP. And although the images show the column names as the same for name, phone and address theyare actually different, like name-firm1, name-firm17,address-firmxyz, etc, etc. I not putting that in the images. The "Option 1", "Option 2", "Option 3" and "Option 4" columns are generated using a =IF formula.
I have another sheet titled "ResultsSheet".I'm needing a way or code to copy entire rows from the multiple data blocks/ranges in the "LeadSheet", and paste it in the"ResultsSheet", based on any value occurring in any of the"Option" columns within the individual data blocks/ranges along with appending the "Option #" title to either end of the copied row.
The "LeadSheet" is constantly being updated so information is being added and taken off all the time. That being said, is there anyway to make it update as soon as the "LeadSheet" does or on a timed interval so that the"ResultsSheet" is always up to date. And also prevent it from continuing to re-copy over duplicates of information that has not changed?
Ifthe "Option #" result is the exact same percentage then the order does not matter between them.
Ifwithin the same data block/range both "Option" columns have data it is usually because of some error and is most likely bad datathat does not need to be copied. i.e. "Steven Seagal". If that makes this task much more difficult I can live with it.
If within two or more different data blocks/ranges the same name and info appears that if fine because the "Option #" will always be different. i.e. "Chuck Norris".
I am also trying to make the "ResultSheet" ordered from largest percentage to lowest, but I assume that should be done once the data is on the "ResultsSheet". No headers or titles are necessary on the "ResultsSheet"
Data Block example 1:
Data Block example 2:
I'm trying to create a command button on my sheet that when clicked will find all rows in column u that read Engineering Evaluation and then copy certain cells from that row to another sheet. The kicker is that this button will be used over and over again as more entries are entered into the log. I only want each row counted once.
Right now I get a run time error for the "For Each Cell In Application.Intersect(Range("u:u"), target)" line.
I'm trying to copy the cells from a sheet and transfer only the values to other sheet.
I did it via code and it worked fine, except for the dates. In the new sheet the months and days are swapped.
The original date is composed via the concatenate function, since it gets inputs (day, month and year) from the user in different cells. It's in the format D/M/YYYY (examples: 4/2/2014, 10/12/2013). I believe the excel interprets it as Text, even if I formated the cells to Date.
I think it may have something to do with the default format in different countries. Here in Brazil we use DD/MM/YYYY, but my Excel is in english and in US the format is MM/DD/YYYY, am I right?
The senior members have made it less intimidating to start writing code. Infact I picked up a DUMMIES book and a Macro book and it's been a lot of fun. Anyway here is my code that I have created thus far.
HTML Code:
Sub ReportExtract()
Sheets("Sheet1").Range("B2").Copy Destination:=Sheets("Sheet2").Range("C4")
Sheets("Sheet1").Range("A2").Copy Destination:=Sheets("Sheet2").Range("C6") '
[Code]....
Essentially what I am trying to do is copy these cells from sheet 1 to sheet 2 and then save it as another file using the name of C6&"Text String *Report" This would essentially take the first record A2 - CL2 and then delete that record and move onto the next row 3 and loop through and create another file with the same name C6(Sheet2)&"Report Name" Sheet 2 is the template where the data from the rows will drop into. I have those called out above in the code. It works just fine. I'm stuck though with how to copy the file and move threw all the records and saving them as separate files. Just to make sure I am clear it's 1. Copy data from sheet1 to sheet2 (Template). 2. Then save that file with the file name as cell C6&"some text" concatenated. Loop through sheet1 grab the next record and rinse lather repeat. Just a few weeks ago I was struggled to create macros and now I can copy. Pretty weak I know but I really enjoy this, in fact I sold all my books and just have VBA material so I stay focused.
Have you ever copy a row with formula in locked cells & insert it in a protected worksheet?
View 1 Replies View RelatedTried to write a Macro to Range Cells in a sheet, setting the range values from a another cell. I have encounted a Run-Time error as select method of Range class failed. Below is the Macro.
Sub Macro1()
Dim r1 As Range, r2 As Range, myMultiAreaRange As Range
Worksheets("Pre").Activate
Set r1 = Range("J4")
Set r2 = Range("K4")
Set myMultiAreaRange = Union(r1, r2)
myMultiAreaRange.Select
Worksheets("Data").Select
Range(r1, r2).Select
Selection.Copy
Sheets("1").Select
Range("B5").Select
ActiveSheet.Paste
End Sub
Have the Ranges been set incorrectly
In the attached wb I have 4 sheets. The macro selects a row then copies it to specified location. This works great. What I would now like it to do is match data in (MonthStats) column b then copy those rows to specified location. eg All rows containing AAA would be selected then copied to sheet AAA. I have searched various threads but without success
View 4 Replies View RelatedI have approx. 35 workbooks similar to the attached in a single directory. Each workbook has 3 tabs named Help, Example and Template. I need to copy the 36 Template tabs into one new workbook. I would also like to rename each tab in the new workbook based on the text in cell A1 of the originating Template tab. M
View 6 Replies View RelatedThank you all so much for this wonderful forum. Today has been a day of going through post after post. I am usually able to solve my problems through reading similar issues. However, just can quite get this one and I think it is rather simple, but frustrating none the less.
Attached is a spreadsheet with a list names in column B. The codes I have tried to write or have copied find one name and paste it to sheet 1. However, I need to find several names and then copy each row to sheet 1.
i'm trying to do (for the past couple of days manually) is copy the names from the 2nd sheet to the 1st sheet but need to make sure that the proper location ID match that of the 1st sheet. If two names is assigned to the same location, a new line will be added to the 1st sheet but never allow if the location ID do not exist.
<1st Sheet>
A1, B1, C1, D1
ID, Name, Loc ID, Location, contact, date
1011,-, 101, 1/F, RM101,-
1012,-, 102, 1/F, RM102,-
1013,-, 104, 1/F, RM104,-
1014,-, 203, 2/F, RM204,-
<2nd Sheet>
Name, Loc ID, date
Thomas,101,10/03/09
Anthony,101,11/02/09
George, 102,11/25,09
Susan,203,10/31/09
Carrie,103,11/20/09
This Macro works fine to copy data from multiple sheets into one master sheet, but it is also copying the formula. How can I change this Macro so that it is copying and pasting VALUE only?
Sub Combine()
Dim J As Integer
On Error Resume Next
' work through sheets
For J = 4 To Sheets.Count ' from sheet 3 to last sheet
Sheets(J).Activate ' make the sheet active
Range("A10").Select
Selection.CurrentRegion.Select ' select all cells in this sheets
' select all lines except title
Selection.Offset(1, 0).Resize(Selection.Rows.Count - 1).Select
' copy cells selected in the new sheet on last line
Selection.Copy Destination:=Sheets("Combined").Range("A65536").End(xlUp)(2)
Next
End Sub