I need a macro that can set up some named ranges using the text in the header row and the sheet name. The header row will always be in row one, but the number of columns will be dynamic. The amount of rows in the range will need to be dynamic also. To clarify, every used cell stating in row 2 in a column will be the named range with the sheetname+text in row one of the column the actual name.
View 4 RepliesI am looking for a solution to dynamically create named ranges according to the contents of cells in a particular column. The following code works for 1 word names, but in many cases the title cell contains numerous words separated by spaces. Is there a way I can adapt this code so that it will name the ranges with the spaces removed? For example, where cell C2 contains the narrative 'Sales Ledger Control', I would want the range name 'SalesLedgerControl'.
Range("R2:Z2").Name = Range("C2")
The named ranges are referred to in numerous other worksheets, where selecting a particular narrative from a listbox creates a dependant drop-down in the adjacent cell (eg if Sales Ledger Control is selected, the dependant list contains names of customers). FYI, the data validation in the other worksheets ignores the spaces in the range names, ie: =INDIRECT(SUBSTITUTE(G2," ",""))
It would not take me long to name the ranges manually, but a macro is preferable because the narratives in the title cells will often change and the range names will obvioulsy also therefore change.
I am trying to creat a macro that loops all the named ranges in a worksheet named "Labels", and copy the data to a new worksheet for each named range it finds in the same workbook and name each worksheet with the named range name.
View 5 Replies View RelatedMacro that could look at a row and take the values of two cells, combine them and then create a range name for a third cell in the row.
For example; for row 5420, in column C there is the word Florida, in column D there is the number 6235, and in column F there is a sentence or two. Is there a way to automatically create a named range for the cell of column F that would be named FLORIDA6235? And if so, can the macro do this for every row even if the word and/or the number changes.
I have roughly 28,000 rows and nine columns that I am working with. That's why I was wondering if there was a way to automate this. There are 10 states and I don't know how many different numbers attached to the states, however there are many state and number combinations that repeat, so there would be several rows with Florida in column C, 6235 in column D but a different description in column F.
I need to make named ranges from an unknown number of columns(at least 1) each with an unknown number of rows. Each column has the name of the named range as the first row, and then a variable number of rows containing part numbers.
I can do it 1 by 1, but id rather do it in a loop so that blanks dont cause errors. there will be different people using versions of this sheet with different model/part number information What i've tried: Count number of colums with row 1 containing data (11 max, which is more than will ever be used) add into array(I know i dont really need to add into the array, but i might use it later for some other code). The problem i'm having is finding the range of rows that need added to the named dynamic range and adding it.
modelcount = Range("G7") 'G7 (for now) contains =COUNTA(H1,I1,J1,etc)
For i = 1 To modelcount
Redim Preserve Models(0 To i)
Models(i) = Cells(1, i + 7)
Range1 = Cells(2, i + 7).Address(xlA1)
lastRow = Cells(rows.Count, i + 7).End(xlUp).Row
Range2 = Cells(lastRow, i + 7).Address(xlA1)
Reference = Cells(2, i + 7).Address(xlA1)
ThisWorkbook.Names.Add Name:=Models(i), _
RefersTo:="=OFFSET(Reference,0,0,counta(Range1:Range2),1)", Visible:=True
Next i
This gets me the range i need, but doesnt create the named range properly. If i go to insert>names>define, the named ranges are created, but they dont relate to the data in any columns. It shows the variable names rather than the cell range the variable represents.
I cant seem to find the correct syntax for creating 14 validation lists using array members as the source of the named ranged. The validation lists are stored on a different worksheet, the Named Ranges are created fine, as are the ranges that are having the validation applied. The Syntax I am having a problem with is
Public Sub assignDVList(WSD As Worksheet, sListName As String)
Dim DVListName As String
DVListName = "DV" & sListName
Application.Goto Reference:=sListName
With Selection.Validation
.Delete
.Add Type:=xlValidateList, AlertStyle:=xlValidAlertStop, Operator:= _
xlBetween, Formula1:="=" & DVListName
It is the Formula1:="=" & DVListName that is creating the headache. The sub is called as the array moves through the columns, using the header row as the Name for the Named Range, and the data Validation worksheet uses the same naming except it has DV in front.
I'm trying to make my worksheet generate a bunch of named ranges whenever it is activated. However, I'm getting a "Not a valid name" error on the line in red. The value of r is a string, so I really don't see what the issue is. Another time, I got a object defined error, but I think I've declared everyhing too. That line is very similar to the line above, and tends to work once (the first time around the loop). After that, I get the errors I mentioned.
View 4 Replies View RelatedI keep losing my named ranges when attempting to reopen a particular file I am working on. I get the "excel found unreadable content....." error message and then when it corrects, the range names are all gone. is it efficient to create the named ranges at open? Otherwise how should it be done so that my workbook will definitely have these names each time its used?
View 3 Replies View RelatedIs there any way in Excel to create single-cell named ranges from a combination of the labels in the rows and column of a spreadsheet.
Here is an example:
CompanyA
CompanyB
CompanyC
CompanyD
Sales
100
200
[code]....
I would like the first cell (containing the 100) to have a defined name of (something like) "SalesCompanyA", and the second cell to be "SalesCompanyB". And so on - e.g. the cell with 300 in it should be "CostCompanyA".
I can do it manually, but I have a huge spreadsheet & was hoping it could be automated. Just to be clear, it needs to be a single cell range. I know you can create a range from a selection - but this seems to create ranges of the entire row and/or column.
I am employing code to label dynamic ranges that takes the form of,
ActiveWorkbook.Names.Add Name:="dms", RefersToR1C1:="=OFFSET(DMS!R10C5,0,0, COUNTA(DMS!C5),COUNTA(DMS!R10))"
'dms_j
ActiveWorkbook.Names.Add Name:="dms_j", RefersToR1C1:="=OFFSET(DMS!R11C10,0,0,MATCH("" * "",DMS!C10,-1),1)"
'dms_p
ActiveWorkbook.Names.Add Name:="dms_p", RefersToR1C1:="=OFFSET(DMS!R11C16,0,0,MATCH("" * "",DMS!C16,-1),1)"
'dms_r
ActiveWorkbook.Names.Add Name:="dms_r", RefersToR1C1:="=OFFSET(DMS!R11C18,0,0,MATCH("" * "",DMS!C18,-1),1)"
'dms_t
ActiveWorkbook.Names.Add Name:="dms_t", RefersToR1C1:="=OFFSET(DMS!R11C20,0,0,MATCH("" * "",DMS!C20,-1),1)"
The dynamic ranges are getting entered but the problem is that the range "dms" overshoots by six cells into blank cells at the bottom of the table, and the rest of the ranges overshoot by ten cells into blank cell area. I have deleted, cleared and destroyed everything around the table and re-sized the active area to no avail.
I've created my dynamic named ranges using the OFFSET function, ex.
="OFFSET(SAMPLE!$D$4,1,0,COUNTA(SAMPLE!$D:$D)-1,1)"
I'm now trying to get my chart to use that range. I read at [URL] .... that I need to make sure my series reference is a fully qualified reference. So I've entered that series reference using the name of the workbook followed by the range name (=2012-PIRS.xlsx!SAM_CLAR2DEL). I have two copies of my workbook (one as xlsm with VBA project, and one with xlsx without VBA) and I can't get Excel to accept the series value in either workbook.
ERROR MSG:
The formula you typed contains an error. Try one of the following:
- Make sure you've included all parentheses and required arguments.
- To use a function, click Insert Function on the Formulas tab (in the Function Library group).
- If you include a reference to another sheet or workbook, verify that the reference is correct.
- If you are not trying to enter a formula, avoid.........
I use the standard OFFSET-COUNT-MATCH method to create dynamic named ranges in my Excel projects. Needless to say, this method won't work on a spreadsheet with formulas extending beyond the current range. The count function counts the cells containing formulas, even though they may contain no data. Does anyone know how to construct a formula that will IGNORE the "formula only" cells??
View 3 Replies View RelatedI need a formula that will give me a persons name that is stored in Column B based on the highest value within 5 named ranges. Each named range is a selection of every other cell in individual columns i.e. named range junior1 is cells in column E, named range junior2 is cells within column H and so on.
I've attached the worksheet as it as present.Sample Running Scores 3.xlsx
Cell Y3 shows the highest individual score shot (not handicap score) from columns E,H,K,N,Q (or more accurately the named ranges Junior1, Junior2, Junior3, Junior4, Junior5 within these columns). Each of these columns represents a different round in each league, in this case a Junior National League. I now need Y4 to show me the name of the person that shot the highest individual score, in this case Person 21.
I know I need to use a combination of Index & Max in some way but I can't work out what or how.
i edited this thread becuase I realized why I was getting the wrong results, however, I am completely clueless on how I need to accomplish the task below.
I need to apply formatting based on five named ranges on another sheet. if the values in cell F1:F1000 appears in the named range "datestore" and the corresponding value in range h2:h1000 appears any of the named ranges "date1" through "date5" I would like it to fill the cell yellow.
I m trying to make a query based on a dynamic range and paste the results in a sheettab of my wrorkbook.
View 9 Replies View RelatedI have just started diving into the vast world of dynamic ranges and it's a bit overwelming. I have a dB of sorts that a listbox in a userform fills off of. The dB will be driven by column A and B. Column B are names that are displayed in the listbox. Column A is the class that these names belong to (3 classes). I need to develop dynamically named ranges of Column B based off of Column A. In other words, I need a dynamically named range for all of class1, class2, and class3 in column A to display column B in the listbox on the userform. I have attached an example to clarify the example.
View 6 Replies View RelatedMacro for two named ranges. I have this code, which works fine...
View 4 Replies View RelatedVBA code to remove all named ranges in a workbook that contain "#REF" in the reference. I have some legacy workbooks and some have hundreds of invalid named ranges, it's painstakingly slow to delete them manually, a macro to wipe out the ones with #REF in them
ie:
Names in Workbook:
Print_Area
Refers to:
='I:ReportngAlain[buckets.xls]#REF'!$U$774:$AC$811
This one has the #REF in the reference, I'd like ones like this go be wiped out.
I have written this macro to convert into a csv file to run for all defined named ranges in the activesheet. It run jst perfect when I hit SAVE button and it creates that many different CSV files for each named range.
However I am trying to use same macro in the another file and the problem I am facing is there a lot more named ranges and I want to run the macro for only selected NAMED RANGE. In this case 2 Named Range / 24 Named range.
What part of code do I need to change and to what to make it work for just 2 named ranges ?
I had an idea that I could use the level of indent in the first column to provide the name for the range. The easiest way to explain is with the example spreadsheet I have attached
Cells C5:C10 show how the naming convention should look like, basically Indent Level 0 returns a prefix (Sheet_Name_Prefix) and its corresponding row entry in Column A. Level 1 should return the last Level 0 name and its corresponding row entry in Column A.
I had a go at the code and it works for Level 0 but I can't get it to put to Level 1.
Sub Test()
'Dimension Variables
Dim RowTitleEntries As Integer
Dim NameLoop As Integer
Dim IndentLevel As Integer
'Set the value of RowTitleEntries
RowTitleEntries = 6
I looking for a macro to look in a list in worksheet "Map_Ref", and take the Range Name of column "A" and copy that range in the corresponding Tab and range as specified in Columns "C" and "D" (i,e. take range name "BB Staff Counts_Tenured" from cell "A2" and copy that range in worksheet "Sheet2" (as specified in cell C2), range "A2" (as specified in cell D2). And so on.
List of worksheet "Map_Ref":
Column AColumn BColumn CColumn DTable/Range Title/Name:
Range in Tab "CMD_1"Copy to Tab:To Range:BB_Staff_Counts_TenuredA126..Q156Sheet2A2Branch_Counts_BBmarketsA35..
C47Sheet2A59Branch_Counts_Chase_SBRM_RegA30..E33
[Code] ........
What I have is a large number of sheets in a workbook (26 to be exact). Each of these sheets has one specific named range. The file itself is quite large so I would like to print these ranges to a single PDF file. I did my best to search for this topic in the forums and while I did find some macros that were close, there was some sort of piece of code missing. Also, will how I list the named ranges determine the order of how they will show up in the PDF File?
View 3 Replies View RelatedI did the huge macro that names a bunch of dynamic ranges, all similar to the following: Range("=OFFSET(BD!$C$32,0,1,1,COUNT(BD!$32:$32))").Name = "ChtBDLabel"
I tested it as I went along, so I know it was working. Then I worked on several other tasks (copying the range to another location on the sheet, making graphs from the ranges). Now when I go back to run this again, I get: Run-time error '1004':
method 'Range' of object '_Global' failed. I went and looked what I thought were my named ranges, and they were wrong (not dynamic, just a cell reference). I deleted them and tried again with same error.
I have a worksheet that has hourly data. So Column C of this worksheet looks like
1
1
1
1
2
2
2
3
3
3
3
3
3
What I want to do is, given an hour h, automatically create a named range that contains all the rows such that the value of Column C is equal to h.
I am quite new on this forum.
I would like a dynamic range to be multiplied with 2. The Range is always start in cell H14 to P?
I have multi checkbox in column F,
So here is an eksampel: If checkbox in F4 is true then Range H4:P4, should by multiplied with 2 else if the chekbox is FALSE, then only multiply with 1.
I want to entry data in the Range H14:P? by this code
Private Sub Worksheet_Change(ByVal Target As Range)
'Do nothing if more than one cell is changed or content deleted
If Target.Cells.Count > 1 Or IsEmpty(Target) Then Exit Sub
I need to create a named range on multiple sheets with the same named range & i cant figure out how to do this. EG :- I want to create a named range called "_SubUnitRows" on sheet1 starting from "A1:A50" & other named range again called "_SubUnitRows" on Sheet2 starting from "A1:A25" ...
View 2 Replies View RelatedI am looking for a macro that will allow me to create a dynamic range based on the settings I give it. I would like the dynamic range to be called tracking_number and it to have a reference to =Offset(MainReport!$A$2,0,0,COUNTA(MainReport!$A:$A),1)
If this is possible I would really appreciate it. The reason I need this is because I have 2 workbooks. They are the one with the MainReport in it and then the Master workbook. Every day the workbook containing the MainReport is overwritten with more data, so I can not store a dynamic range and reference it each day.
Merge two columns into one list in excel
I would like to combine List1 and List2 into a 3rd named range called List3. I was wondering if this were possible without using any additional cells/columns (i.e. I don't want to use Column C like in the example shown in the link above).
Here's the formula from the example:
Code:
=IFERROR(INDEX(List1,ROWS(C1:$C$1)),IFERROR(INDEX(List2,ROWS(C1:$C$1)-ROWS(List1)),""))
I've played around with it, but could not come with any that worked.
I have to use several dozen pivot tables a day. I already use a couple of macros to do a lot of the tedious formatting, but if I could automate this it would save me a lot more time. I have been trying to both write a code and modify code written by the recorder but have not even come close to anything that works. What I want is to have a macro that searches through the column header for predefined names and if it comes across one of these names it will insert a specific formula, based on its name, in the first cell below the header. Then it will autofill to the last row and move on to searching for the next predefined header name. If that name is not found, it will move to the next predefined header name. One major problem is that the formula to insert under any specific header name is based on other columns in the table that aren't always in the same range. So, not only do I need it to search for columns to place a formula in, that formula has to search for the appropriate column to find the correct value to use in the calculation.
For example, one predefined column name would be Avg Price. The formula for that column would be (Sales/Qty Sold), but these 2 columns could be located anwhere in the table. How can I get it, once it has found a column that needs a formula, to locate the correct column/cell to get the correct value from the sales and Qty Sold columns?
I have named/(grouped?) a column (J) "DeltaNet". I want J2 to sum everything below (excluding the "Net" Header). I tried =sum(DeltaNet) but get a circular error. I'm also trying to get cell A1 to do a =countA for all below it.
Sample: Count Formula
Sum formula
Ticket
Date
carrier
CarrierID
Product
Net
12345
6/1/13
UP
CEFX123456
CoarseFaction
114.35