Clear Cell Contents Based On Defined Name
Jan 13, 2010
I'm trying to clear cell contents based on a defined name given to a set of various cells in my worksheet. The cells are not continuous, but since they're given that defined name, I don't think it matters.
The defined name is listed as "CommentsFields".
The worksheet name is listed as "QPRForm_V6"
I found a similar thread, but cannot get it to work with what I'm looking for. I'm relatively new to writing VBA/macros, so I'm not sure what to do.
View 6 Replies
ADVERTISEMENT
Feb 21, 2007
If I have a pick list, or drop-down list, in cell B21 and one of the options in that list is "Clear", how can I get the contents of cell C21 to be cleared when I select the "Clear" option in B21?
Constraint... Don't want to use VBA.
I am thinking of hiding a formula somewhere other than in C21 that evaluates B21 and does an If Then kind of deal to clear C21.
View 9 Replies
View Related
Mar 19, 2009
I have a workbook with two sheets of data. I want to hide column B of Sheet2 and clear contents of range B2:B50 if the value in A1 of Sheet1 is "a".
View 2 Replies
View Related
Feb 18, 2009
Been racking brain, searching through the forum here, and my Excel 2003 Bible all day trying to figure out this problem to no avail. I would like to clear the contents of any cell in a given range if the cell immediately to the right of is formatted as bold.
View 2 Replies
View Related
Mar 9, 2013
I am relatively new to VBA. I am creating an attendance calendar that tracks employees calling sick, late etc.. It is a point based system. What I am looking for is, a way to clear the point value that was manually entered in a specific cell (I3), if there is a Value manually entered in (CU3). Each column in my worksheet is for a specific date ie; I3 is the cell where I enter the points (1.00) for that employee by calling in sick on 3/1/2013, (Column "I" is for 3/1/2013). After 90 days, this point accumulated by the employee does not count against them, so I need that point entered in (I3) to either = 0 or the cell contents to be cleared if there is a value entered in cell (CU3) which is 91 days after, so my (A3) cell does not add that point acquired on 3/1/2013.
I need this to run in a range (I3:I450) so if any value is entered into (CU3:CU450) it has the same result and continue to for (J3:J450) so if any value is entered into (CV3:CV450) and so on..
View 9 Replies
View Related
Mar 7, 2007
I am a financial administrator & every month I have down load 4 bank accts as CSV, import into xl & code (CACode) the amounts for our accountant. I have VBA that formats, adds headings & formula etc but I have a problem/s. In H col I place CAcode & I use a sumif formula in I col to sum all the amounts with that have the same CAcode. For simplicity sake I copy the sumif down & then sort H col ascendindingly (this is done by VBA). Now I am trying write a macro to clear the contents of the cell in I col
if eg h60 = h59
then I60 clearContents, Select h59
Else select H59
Do until H3 is selected
Psuedocode
Select table (A2:I Xldown)
Sort Table by CAcode (H Col)
Set Range as H3:Xldown
Select Last cell with CAcode (Xldown) in H col
For every cell in Range (H3:Xldown)
Use If/thenIf Last cell = 2nd Last cell (H Col) then
Clear contents of I col (last row)
select 2nd Last cell (H Col)
Else 2nd Last cell (H Col)Next Cell
I have to use Xldown to select range as the range will be variable each month & for each bank acct. I need to clear contents of cell to verify that all the sub-totals of unique CAcodes of the CAcoded amounts = the totals Because I may have up to 120 rows X 3 bank accts I am slowly using vba to do my work.
Sub sort_And_delete_Sumif_amounts()
Dim r As Range
'Select range to sort
Range("A2:I98").Select
'Sort CAcode in H col ascendingly
Selection.Sort Key1:=Range("H2"), Order1:=xlAscending, Header:=xlGuess, _
OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom, _
DataOption1:=xlSortNormal
'select range for comparisomn of CAcode
Set r = Range("H3", Selection.End(xlDown))................
View 4 Replies
View Related
Aug 28, 2008
I need some code that will clear the contents of a Row Range(C:T) if either of the contents of cells X and Y = "E"
The code needs to look at cells X17 and Y17 and continue looking until it gets to X216 and Y216
So - If X = E but Y does not, then the row range C:T must be cleared.
If Y = E but X does not, then the row range C:T must be cleared
If both X and Y = E, then the row range C:T must be cleared
If the letter E does not exist in either X or Y, then the row must be left alone
View 13 Replies
View Related
Jul 21, 2006
I'm trying clear the contents of a column range when the cell above this column range is empty. I know how to do this for one cell, but I would like it to work for a rangefrom R15:BB15.
If IsEmpty(Range("r15")) Then
Range("r16:r35").Select
Selection.ClearContents
End If
End Sub
View 5 Replies
View Related
May 25, 2014
I have a column with various values in, string and numeric. The strings I want to keep have "," in and letters one side and "space" on the other. All the cells I want cleared do not have ","
The rest of what I'm using works fine accept this line which forces an error.
[Code]....
View 5 Replies
View Related
Dec 17, 2007
There is data(numerical) or blanks in each of the cells in the range H32:O37
I want to clear the contents if they are a duplicate of the previous line.
Looking for a macro hopefully. Found many to delete the whole row but just the specific range based upon the duplicate criteria..As there is data surronding that area do not want to delete whole row just clear that specifc area.
H32:O32 clear contents if same as H31:O31 if any valuse are different then stays the same
H33:O33 clear contents if same as H32:O32 if any valuse are different then stays the same
H34:O34 clear contents if same as H33:O33 if any valuse are different then stays the same
H35:O35 clear contents if same as H34:O34 if any valuse are different then stays the same
H36:O36 clear contents if same as H35:O35 if any valuse are different then stays the same
H37:O37 clear contents if same as H36:O36 if any valuse are different then stays the same
View 9 Replies
View Related
Apr 13, 2012
I am trying to find something that would allow me to have a spreadsheet clear the contents of a certain cell based on the selection made from a data validation list which resides on the same row. This can best be described with an example.
The user selects anything but " " or "none" from the validation list, which for this example resides in C5, would trigger code to clear the contents, if any, in AA5. If " " or "none" is chosen the value remains.
This capability should be available for each row through 100.
View 3 Replies
View Related
Jan 17, 2012
I have the following code where I want to clear the cells.
Code:
Workbooks(strOutputFileName).Sheets(2).Activate
Range("F9:F25,C27:E57,F59:F60,J9:J25,G27:I57,J59:J60,N9:N25,K27:M57,N59:N60,R9:R25,O27:Q57,R59:R60").Select
Selection.ClearContents
When I run this code, where it should select G27:I57, it instead selects G27:N57!!!!
When I manually try to select the G27:I57, the selection jumps to the right to N57.
When I use this piece of code on a different worksheet, it works OK!
View 6 Replies
View Related
Mar 7, 2007
Is it possible using vba code to clear a specific cell's contents? I have a workbook that has text boxes that need the linked cell cleared when the workbook opens so the user can start fresh with empty text box's.
View 6 Replies
View Related
Feb 7, 2013
I have a spreadsheet with data to row 5000. I have column Y that has an "X" in it. I would like some VBA code to look at each row up to 5000, in column Y for the "X". If it is there, clear the cell contents on the current row in columns T, U, and V.
I've tried modifying some existing code (excluding the Y column range of 5000) but keep getting a "Compile error: Wrong number of arguments or invalid property assignments". How do I set the 5000 limit and get this code back on track?
Sub RemoveBankDelay()
n = WorksheetFunction.CountIf(Range("Y:Y"), "X")
For i = 1 To n
[Code]....
View 9 Replies
View Related
Oct 13, 2009
Is there way to automatically clear the contents of a cell when the user clicks in that cell. Eg, click in "A1" then then "A1" clears automatically.
View 10 Replies
View Related
Sep 12, 2012
Small piece of code to clear the contents of
Rows 33 thru 100 , then
Rows 142 thru 209 , then
Rows 251 thru 318 , then upto
Rows 43524 thru 43591 then finish
View 5 Replies
View Related
Jan 17, 2013
Is is possible to clear the contents of a cell range if a message box appears stating an error. I have tried the following code but the logic doesn't actually work and am struggling to achieve what I am trying to do.
My code so far is as follows:
Code:
If ActiveSheet.Range("F84") > 0 And ThisWorkbook.Worksheets("PES").Range("D24") = 0 Then _
MsgBox "Your Entitlement is currently 0", vbCritical, "Error"
ActiveSheet.Range("K84:T84").ClearContents
The message box appears fine if the IF statement is true but if IF statement is false, the cell range of K84 to T84 on the current sheet is still cleared..
View 2 Replies
View Related
Sep 3, 2008
I am trying to write a piece of vba that clears the contents if the first character in the cell is not #.... if I use "#"*, I get a syntax error
Just figured my syntax needs a slight adjustment to be recognized...
View 9 Replies
View Related
Apr 25, 2008
I need to clear the contents of every other cell in a selection of 5000 rows starting with the first cell. Is there a macro that can do this for me?
View 3 Replies
View Related
Feb 22, 2013
I have created a worksheet with many calculations based on user input into several unlocked cells. I would like to create a cell that when selected, would clear the contents of this group of unlocked cells.
View 10 Replies
View Related
Jul 3, 2014
I am currently using this Code to search column1 for a Key Word that is entered into textbox "Kunde" on my userform.
[Code] .....
What i would really like to be Abel to do is :
Search for the cell in column1 with =Kunde.Value
Clearcontents of this cell and the 2 adjacent to the right.
i.e. Word is found in A7
Cells A7:C7 contents are cleared and fill Color returned to default colorindex 0
View 3 Replies
View Related
Oct 8, 2013
I'm trying to create macro that will clear the contents of the cells in the 4 columns to the left of a cell that = 0 %, as well as the cell that = 0%. For example, if cell F13 = 0 % then the contents of B13:F13 would need to be cleared. The range in which data is being pasted into is B13:F27.
View 4 Replies
View Related
Dec 6, 2006
Is there a way to clear the contents of each cell in a range without losing formulas?
View 9 Replies
View Related
Jun 1, 2014
i need a code that moves down a column and for every empty cell in the column the cell to the left is cleared and then it moves on to the next cell down. the column is not always the same and will start from a selected cell, and the column will contain no more than 5 rows
View 3 Replies
View Related
Jul 17, 2013
I'm attempting to clear the contents from a range of cells on rows where a cell string may equal R, X, XX, Y, Z, ZX, #N/A.
The macro runs fine until it gets to a cell that contains #N/A. How to get this to work?
Sub Recalculate()
Dim r As Integer
r = ActiveSheet.UsedRange.Rows.Count
Application.ScreenUpdating = False
For Row = 13 To r
[Code] ........
View 2 Replies
View Related
Sep 23, 2013
I have a 700 line spreadsheet and would like to delete the cell next to another cell if it contains a certain string. I.e if A1 to A3 equals "Test" then i would like to delete the contents of B1 to B3, But if A2 equals "Completed" then only B1 and B3 should be cleared.
View 4 Replies
View Related
Jun 13, 2014
I'm trying to use the "clear contents macro" for merge cell, but I keep receiving this "compile error : Expected End Sub" error.
FYI, I have named my merge cells to "myMergedCells"
[Code] .....
View 3 Replies
View Related
Feb 20, 2009
I'm sure this is very easy but I just can't seem to get my head around it
I have data in cells j3 and j4 but when the data changes in j3 I'd like j4 to be cleared of it's contents.
View 12 Replies
View Related
May 6, 2009
I need to clear the contents of the cell in Row "A", if the cell in Row "I" is blank.
The issue, is there are roughly 1200 excel documents in a folder and subfolders. That is a painful amount of opening workbooks, sort ascending and deleting. Not on my top 10 list of things to do.
If someone could create a code to do this, and loop it through a folder (I can move all the files to a single folder manually, not an issue)
View 6 Replies
View Related
Apr 10, 2014
I need to clear the contents of a columns G and H starting 11th row based on what is there in F column. The macro should check for last non-empty cell in column F starting F11 (assume it finds F30 to be last non-empty cell), then it should clear the contents of G11 to G30, H11 to H30.
View 1 Replies
View Related
