what is the opposite of sumproduct? I want to divide the quantity in column A by the opposing value in Column B to get the answer in B5. I made this example simple but it would be used on a much larger scale. if there is a function that would divide and sum ?
AB1500102500503100545answer:80
I have 2,000+ cells containing text that I need to break out into multiple cells. They are names (ex. John M Smith MD) and I need each part of the name in it's own column. I need the opposite of concatenate.
View 3 Replies View RelatedI'm trying to find anything that does not equal my criteria in the Find (MI Only). I've tried using to no avail.
Code:
Set rngFound = rngToSearch.Find(What:="MI Only", LookAt:=xlPart, MatchCase:=False)
How to do this, or if it's even possible?
is there a fucntion that does the opposite of CONCATENATE?
i have this
-EUR 1.00
EUR 2.00
i want to remove the "EUR " to end up with
-1.00
2.00
I have two columns with values of either 1 or -1. I'm trying to find a formula that I can write in one cell that counts the # of times column A and column B have opposite signs.
View 9 Replies View RelatedI have a worksheet, example data below, it has 150+ columns and varying amounts of rows 1 -> 2500+ per column. The row data is as follows:
Row 1: Has title of worksheet
Row 2: Date of the column
Row 3: Total of completed for the day
Row 4 - n: Serial number
I need to intsert a new column to the right of each column and then populate it with the date at the top of the column from the left, I need the new date value to go down until it reaches the end of the data in the left column. So effectivly each serial number will have date in the column to its right.
There are no blanks in the rows, or blank columns.
Example of existing:
5/04/2007
35
100621090
104436159
104876402
462933606
Required:
5/04/2007
35
100621090 5/04/2007
104436159 5/04/2007
104876402 5/04/2007
462933606 5/04/2007
**Note date is in second column and taken from top of first column. Does not need to update if date is changed.
In Column A I have a number of differnet country codes and for 2 of them I want to change the value in Column B. For Example if cell A1 is = to "SHA" I want cell B2 to be "SHANGHAI". If cell A1= to "SGN" I want B1 to be = to "HO CHI MINH". If cell A1 is = to anything else I want the value to B2 to remain unchanged.
View 3 Replies View RelatedI need to change the list of names in a column to another area but in the reverse order, not in sorted order (eg. I have list of names in A1:A10 and want to make a reverse order of this list in another area).
View 2 Replies View RelatedI have formula that looks for information from another sheet (sheet name "ValidationLists")in Column A (list "billto") and returns all the occurances in my current worksheet (including the 10 columns next in the array). What it looks for is based on whatever value is currenty in Cell A2.
Example of formula is as follows:
{=IF(ISERROR(INDEX(ValidationLists!$A$2:$J$300,SMALL(IF(billto=$A$2,ROW(billto)),
ROW(1:1))-1,1)),"",INDEX(ValidationLists!$A$2:$J$300,SMALL(IF(billto=$A$2,
ROW(billto)),ROW(1:1))-1,1))}
Basically I want to return everything that matches cell A2 of my current sheet from sheet list "billto" in a different sheet but I need the adjacent cells as well. So one cell below this would read the following (Just the Row Changes):
{=IF(ISERROR(INDEX(ValidationLists!$A$2:$J$300,SMALL(IF(billto=$A$2,
ROW(billto)),ROW(2:2))-1,1)),"",INDEX(ValidationLists!$A$2:$J$300,SMALL(IF(billto=$A$2,
ROW(billto)),ROW(2:2))-1,1))}
And the column B next to the original formula reads the following (just returning one more column from the array):
{=IF(ISERROR(INDEX(ValidationLists!$A$2:$J$300,SMALL(IF(billto=$A$2,ROW(billto)),
ROW(1:1))-1,2)),"",INDEX(ValidationLists!$A$2:$J$300,SMALL(IF(billto=$A$2,
ROW(billto)),ROW(1:1))-1,2))}
It is working exactly how I want it to. The problem is it is taking 2-3 minutes. I can just get a list of rows with the value in A2 from List "billto" very quickly but then how do I get the entire row to appear in my current sheet quickly?
I have a spreadsheeet with values in columns F:K from row 10 onwards
I need VBA code that will delete the rows where there are values opposite and equal in columns F:K from row 10 owards for eg if F10 is 10000 and K10 is -10000, F 25 is 150000 and G25 is -10000, G29 is -175000 and H29 is 175000, then rowa 10,25 & 29 must be deleted
code to copy a cell formula all the way down the same column to the cell where its next immediate row is completely empty.
View 6 Replies View RelatedImagine column A sorted by invoice numbers. Column B has payments applied but due to movement between unapplied cash, some numbers appear as negatives and positives for the same invoice number.
I want to have a formula which says that for each invoice number, look in column b and eliminate opposite numbers and post only unique values. Keep in mind that there may be multiple lines with the same invoice number.
For example, starting with line 5, for invoice 123, payments 400 and -400 in line 5 and 17 and payments 315 and -315 in lines 7 and 9 will zero out but any other unique payment will be picked up and displayed in column C. Lines 5 and/or 17 will be blank in column C.
I have a spreadsheet that is updated daily with data that falls into one of two categories: a) completely new to the sheet or b) existing from the day before but not taken care of yet. The items which fall into category a are evaluated, and notes added to the sheet. The items in category b must be compared to the new data, and duplicated lines deleted but notes from previous evaluation must be kept on the sheet. In addition, anything on the sheet that is not included in the new information needs to be deleted. I've set up a sheet with all old and new data with dates the data showed up as well as the notes associated with the old data, and have concatenated all the info from each row into column V (from another suggestion I got on a similar but not exactly the same problem which I also still haven't figured out). The sheet has been sorted by col V so any matching rows should be within 3 or 4 rows of the original. The problem is that my code does absolutely zilch!
Sub DeleteRepeatedRows()
' goes through coord. sheet and identifies duplicated lines, copies the date from the old row
' copies it into the new line, then deletes the old line
Dim rCell As Range
For Each rCell In Selection
If rCell.Value = rCell.Offset(1, 0).Value Then
rCell.EntireRow.Delete
End If
If rCell.Value = rCell.Offset(2, 0).Value Then
rCell.EntireRow.Delete
End If.........................................
I am developing a Workbook where I import data to one worksheet and then disseminate it to other worksheets. I am not sure if I am overthinking the process, but I am having difficulty writing the macro and getting it to run through the entire list of rows.
There are 4 Columns in the one worksheet, named "Update":
Column A supplies the name of the worksheet that will be updated
Columns B-D contain the data that will update the sheets.
The process that I am trying to write the macro for is a follows:
1. Select/copy the range, starting with B1:D1 on "Update"
2. Navigate to the appropriate worksheet to be update, determined by A1
3. Identify the first blank row, starting with A5
4. Paste the data B1:D1 to A5:C5 (or next available line)
5. Navigate back to "Update" and begin the process again with the next row B2:D2
This process should continue until there is no value in Column B on the "Update" worksheet.
I have a Macro that I use daily on a spreadsheet I get with raw line-item transaction data on it. Basically, it deletes columns I don't need to look at, applies column headers, deletes certain rows that I don't need to look at, applies an auto-filter and filters to the first group of data I need to look at, and puts a subtotal on a couple of columns at the top so I can see totals on filtered results.
I need an additional function in this Macro. At some point in the middle of the actions above, I need to evaluate all rows and delete those that are 'opposites' based on a couple of criteria. Basically, I need to delete any transactions that have been refunded in their entirety, because for my purposes those are zeroed out and I don't want to see them....
I am looking up a risk matrix to return the risk rating... it is very simple, it works on one sheet, but on a different sheet (looking up different data, but same basic format) it returns exactly the opposite rating.
My formula is: =INDEX($G$6:$K$10,MATCH(I19,$G$5:$K$5,0),MATCH(J19,$F$6:$F$10,0))
Here is F4 to K10
I have data validation on I19 and J19 based on the cells below
Consequence
Priority
Very Low
Low
Medium
High
Very High
[Code] ..........
BUT... when I put Very Low and Very Low in the two cells (I19 and K19) I get Very High as the return.
I need to find the value in cell range A:10 A:242 based on
the search criteria found in G:10 H:242
I have a column B which has the text "" in some cells where there is no value. I want a macro that will find a "" and if a cell has then I want the cell to equal to column A
for example ...
I have the following formula's:
SUMPRODUCT(($O$9:$O$259="Active")+0)+SUMPRODUCT(($O$9:$O$259="Clearing Tmrw")+0) and
SUMPRODUCT(--($O$9:$O$259="Active"),$B$9:$B$259)+SUMPRODUCT(--($O$9:$O$259="Clearing Tmrw"),$B$9:$B$259) and
SUMPRODUCT(--(YEAR($A$9:$A$259)=$E$4)*($O$9:$O$259="Active"),$B$9:$B$259)+SUMPRODUCT(--(YEAR($A$9:$A$259)=$E$4)*($O$9:$O$259="Clearing Tmrw"),$B$9:$B$259)
My spreadsheet A1 to Q7 are where the headers and above formula's are and row 8 is hidden and has other formula's in (col C,M,N,O,P & Q)
The User then clicks the insert row macro which inserts a blank row (with row 8 formaules) into row 9.
However, the above formula's then change from 9 to 10 therefore, not picking up all the amounts.
Can anyone help me so that the formulas continue from row 9 ?
I have the following formula:
View 4 Replies View RelatedI have a spreadsheet in which I am using SUMPRODUCT. As you can see from the attachment, on the "Breakout by PIpeline" tab, Columns C, D & F are working perfect. However, Column B & E are duplicates of C & D - just wanting to pull the volume from the "Detail" tab instead of the dollars...and I keep getting the #VALUE! error.
I have tried formatting the Volume column differently - and even multipling the data times -1 and then pasting back in.....
How to add another sum to this formula?
this is the formula i have at the moment
=SUMPRODUCT(--($AA$21:$AA$6376
Here's my question.
jan- feb- mar- apr- may
rep a 1 1 2 5 1
rep b 1 2 7 7 7
rep c 5 5 1 2 2
rep d 1 1 1 1 1
rep e 2 2 2 2 2
rep f 1 2 3 4 5
rep g 0 0 0 7 9
date date
March May
How do I set it up so that I will have two cells that will contain a month. Once the 2 months are selected it will give me the total for each rep during that time period? Do I use sumproduct?
I have a report with a macro that imports a .TXT file into Excel then calculates the follwing formula. For some reason, before the .TXT file is loaded the formula is fine and has no errors, then when it is run I get a "#NAME?" error. I thought it might be because the formula changed during the macro but that's not it. Examples are below.
I've looked online and tried naming the ranges, but that doesn't work. I've tried the built in help but that didn't help. I've tried making sure the analysis pak is installed but that's not it either.
I've ran out of ideas now and you guys are my last hope. Any clues...??
Before macro:
=SUM(SUMPRODUCT(--(DelDate>=6),--(Branch=$B3),--(Status"DEAL"))-SUMPRODUCT(--(DelDate>=6),--(Branch=$B3),--(Status="AWAI")))
After macro:
=SUM(SUMPRODUCT(--(DelDate>=6),--(Branch=$B3),--(Status"DEAL"))-SUMPRODUCT(--(DelDate>=6),--(Branch=$B3),--(Status="AWAI")))
=SUMPRODUCT(OR(MIS!$T$4:$T$2042>500000)*(MIS!$U$4:$U$2042>500000))*(MIS!$Z$4:$Z$2042=C2)
it is if the cell in Column T >500,000 or the cell in Column U is more than 500,000. I keep getting a value error and I can't find a way around it.
I'm working on a project on predicting future cash flows from loans we have made and have ran into a wall as i can't figure out the formula to achieve what i would like to do. I've gotten a lot of help from you guys in the past and would appreciate any help you may be able to provide for this problem. So here it goes. First, here is how i have the spreadsheet setup.....
View 9 Replies View RelatedI've got a spreadsheet that had _many_ sumproducts and calls to vba functions and when it recalculated took some time to finish, so I thought I'd group the vba function with the sumproduct to see if it was faster, but I keep getting a #Value! error. The sumproduct layout worked fine on the actual spreadsheet, so I'm sure something is lost in translation. Here is my
Function weight(Aref As Range, count As Integer, Bref As Range) As Variant
Dim i As Integer
Dim top As Integer
Dim vA() As Variant
Dim cA() As Variant
Dim vR As Range
Dim cR As Range
Dim count As Integer
count = Widgets.Rows.count
ReDim vA(count - 1)
ReDim cA(count - 1)
top = Aref.Rows.count
For i = 0 To top - 1.............................
I seem to get a sum of 0 when I use this sumproduct syntax: SUMPRODUCT(($R$77:$R$442="H")*($Q$77:$Q$442="OTE"),(D77:D442)). What am I not doing?
Below is an e.g. of my data
CDEFGHIJKLMNOPQRAdmin4444440 ...
=-SUMPRODUCT((Catagory=$A26)*(MONTH(Paid_Date)=12)*
(YEAR(Paid_Date)=12)*(How="Till")*(How="Banking")*(Expenses))
This problem is I keep getting a #Value! error when I place the date section into formula. I have check to see thatthe date format is correct and as far as I can tell it is EXAMPLE: 06/12/2007
This formula did work in a nother worksheet, thus the confusion Ihave
The other issue is how to get two different text items in the "HOW" group to be True for Formula to pull requested values???
Now I am trying to build a user-defined function to use it.
It works in EXCEL but I can't get it to work in VBA
Function xxx(x,y)
Dim a, b, c As Range
a = Range("a4:a14") ' contains text
b = Range("b4:b14") ' contains text
c = Range("c4:c14") ' contains values
Range("a20") = Application.SumProduct((a = x) * (b = y) * c)
End Function
