Copy Formula Down To 1st Empty Row In Opposite Column
Aug 19, 2006code to copy a cell formula all the way down the same column to the cell where its next immediate row is completely empty.
View 6 Replies
ADVERTISEMENT
Copy Cells To Worksheets With Worksheet Name In Opposite Cell
Aug 11, 2007I am developing a Workbook where I import data to one worksheet and then disseminate it to other worksheets. I am not sure if I am overthinking the process, but I am having difficulty writing the macro and getting it to run through the entire list of rows.
There are 4 Columns in the one worksheet, named "Update":
Column A supplies the name of the worksheet that will be updated
Columns B-D contain the data that will update the sheets.
The process that I am trying to write the macro for is a follows:
1. Select/copy the range, starting with B1:D1 on "Update"
2. Navigate to the appropriate worksheet to be update, determined by A1
3. Identify the first blank row, starting with A5
4. Paste the data B1:D1 to A5:C5 (or next available line)
5. Navigate back to "Update" and begin the process again with the next row B2:D2
This process should continue until there is no value in Column B on the "Update" worksheet.
Duplicate Every Nth Cell In Opposite Column
Jan 17, 2008I have a worksheet, example data below, it has 150+ columns and varying amounts of rows 1 -> 2500+ per column. The row data is as follows:
Row 1: Has title of worksheet
Row 2: Date of the column
Row 3: Total of completed for the day
Row 4 - n: Serial number
I need to intsert a new column to the right of each column and then populate it with the date at the top of the column from the left, I need the new date value to go down until it reaches the end of the data in the left column. So effectivly each serial number will have date in the column to its right.
There are no blanks in the rows, or blank columns.
Example of existing:
5/04/2007
35
100621090
104436159
104876402
462933606
Required:
5/04/2007
35
100621090 5/04/2007
104436159 5/04/2007
104876402 5/04/2007
462933606 5/04/2007
**Note date is in second column and taken from top of first column. Does not need to update if date is changed.
Autofilter Column A Then Copy Data To Another Sheet With An Empty Column
Mar 7, 2007I'm trying to write a program for work. One sheet (whereiseverything.xls) will have a list of parts column E and where it is in the process column (k). Column E of this sheet will have multiple part numbers. (Sometimes duplicated.) I would like to figure out how to write a code to Auto filter (whereiseverything.xls) sheet and copy only one P/N from (whereiseverything.xls) column E onto another Workbook Worksheet (Commit status.xls) column. After that the sheet must copy all of the locations of that P/N from whereiseverything.xls column K into and under the P/N of the Commitstatus.xls.
It will continue to autofilter and copy from where is everything, the "one" p/n and all of its locations into another empty column of Commitstatus.xls until it no longer has part numbers to autofilter on whereiseverything. I am extremely green on VBA programming but here is my first attempt.
Windows("Where is everything commits .xls").Activate
Windows("whereiseverything[1].xxx").Activate
Columns("D:D").Select
Selection.AutoFilter
Windows("Where is everything commits .xls").Activate
Windows("whereiseverything[1].xxx").Activate
Selection.AutoFilter Field:=1, Criteria1:="7516113-905" \<--this Is one p/n
Columns("J:J").Select
Selection.Copy....................................
Copy Cells From Column To Adjacent Column If Bold Or Empty
May 20, 2008I have a worksheet on which the data is already grouped. At the top of each group is a row that contains only the group name. Since the rest of that row is blank, I want to use a blank cell on that row as a reference, then copy the group name to a newly created column, then fill that column down to the next group.
The goal is to create a column that contains the group name, rather than just having the group name as a " header" at the top of each group.
Summing Up Opposite Numbers In A Column Based On Criteria
Jun 10, 2009Imagine column A sorted by invoice numbers. Column B has payments applied but due to movement between unapplied cash, some numbers appear as negatives and positives for the same invoice number.
I want to have a formula which says that for each invoice number, look in column b and eliminate opposite numbers and post only unique values. Keep in mind that there may be multiple lines with the same invoice number.
For example, starting with line 5, for invoice 123, payments 400 and -400 in line 5 and 17 and payments 315 and -315 in lines 7 and 9 will zero out but any other unique payment will be picked up and displayed in column C. Lines 5 and/or 17 will be blank in column C.
Delete Rows If Opposite Column Cell Matches
Sep 6, 2006I have a spreadsheet that is updated daily with data that falls into one of two categories: a) completely new to the sheet or b) existing from the day before but not taken care of yet. The items which fall into category a are evaluated, and notes added to the sheet. The items in category b must be compared to the new data, and duplicated lines deleted but notes from previous evaluation must be kept on the sheet. In addition, anything on the sheet that is not included in the new information needs to be deleted. I've set up a sheet with all old and new data with dates the data showed up as well as the notes associated with the old data, and have concatenated all the info from each row into column V (from another suggestion I got on a similar but not exactly the same problem which I also still haven't figured out). The sheet has been sorted by col V so any matching rows should be within 3 or 4 rows of the original. The problem is that my code does absolutely zilch!
Sub DeleteRepeatedRows()
' goes through coord. sheet and identifies duplicated lines, copies the date from the old row
' copies it into the new line, then deletes the old line
Dim rCell As Range
For Each rCell In Selection
If rCell.Value = rCell.Offset(1, 0).Value Then
rCell.EntireRow.Delete
End If
If rCell.Value = rCell.Offset(2, 0).Value Then
rCell.EntireRow.Delete
End If.........................................
Copy To Empty Column
Jul 2, 2014I would like to paste my manually copied columns to another sheet next to an empty column. And start paste on column E if not empty using a command button as trigger
Like if i manually copy column B from sheet1 and paste it to sheet2 column E if not empty.
Copy & Paste To First Empty Column
Jun 9, 2007Need code to copy a column from a worksheet, and paste it in the first empty column in a second worksheet? I can do this easily when I want to copy/paste to the first empty row using the
Sheet3.Select
Range("A1:A10").Select
Application.CutCopyMode = False
Selection.Copy
Sheet2.Select
Dim LastCell As Range
With ActiveSheet
Set LastCell = .Cells(.Rows.Count, "A").End(xlUp)
If IsEmpty(LastCell) Then
'do nothing
Else
Set LastCell = LastCell.Offset(1, 0)
LastCell.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
End If
End With
but I cannot find a way to change this to columns!
Copy And Paste Data If Row In Column N Is Empty.
Dec 29, 2009Copy and paste data if row in Column N is empty.
Here is my current code
Copy Paste Into Last Empty Cell In Column
Aug 23, 2007I need my macro to copy and paste from one worksheet to another, which is fine. However I need the copied value to be pasted into the last empty cell in a specific column. It is currently pasting each copied value into the last empty cell in column 'A' regardless of which column I specify it to copy to in my code.
View 5 Replies View RelatedIs Empty Script Then Dont Copy The Formula
May 1, 2009The script works however I dont want the formulas to be entered into the cells that dont have any information in them because I am using them in a list box. To sum it up. So if sheet LA (Range A3:B98) is empty then dont copy the formula. If there is a data in this range then copy the formula. Here is the script that copies the formula's I just need to check sheet LA before it does this.
View 2 Replies View RelatedModify VBA To Copy Duplicated To Next Empty Column - 3 Sheets
Aug 21, 2014i need a code line to modify in the code that when find duplicated string (found in 2 sheets) Copy to a next empty Column of a 3rd sheet
how code work: The code is working Fine (excellent!), Its compare 2 given range from 2 sheets( "sheet-1" and "Page-1") and if duplicated string is found on such Ranges, with condition of a min/Max of 5 to 12, then these string are copied on a new sheet called "Intercepted". The problem (is my mistake ) is that the small report is copied, BUT is not copy continuously to next empty column.
I tried to modify my self but not success because i don't know which line delete and where to add the the new code Line.
Copy Values Of Cells In Column To 1st Empty Cell On Row
Apr 8, 2008I have two sheets and I want to copy the values in a row in the first sheet to the second sheet. I am doing the following:
Sheet2. Range("A1").Value = Sheet1.Range("A1", Sheet1.Range("A1").End(xlToRight)).Value
But this only copies the value of A1 in Sheet1 to A1 in Sheet2. How should I modify it to copy the values for the whole range to the second sheet?
Copy/paste Values (copy Values Of Cells From B4 Till B-empty To C Column)
Jun 26, 2009Sheet linked from external file, new data coming daily. How to copy Values of cells from B4 till B-empty to C column? The attached file has a properly displayed data.
View 3 Replies View RelatedExcel 2013 :: VBA Copy Many Separate Rows Into First Empty Column?
Oct 30, 2013I'm back working on my estimate sheet again and hit another roadblock. I have a series of rows all separated by multiple spaces and would like to copy every one to the first empty column on a separate page sequentially until a certain condition is met (first time row starts with zero in column U, in this pic second row down would end routine).
The first column here is U on sheet "Partitions & Woodwork" so since this first row doesn't start with a zero, U10 - BC10 would need to be copied and pasted transposed into the first open column on sheet "Rebirth" (2nd pic below).
U V W X Y Z
It would be pasted transposed here from B2 downwards on sheet named "Rebirth". The next row that didn't start with zero would be pasted transposed starting at c2 and so on until the first time a row beginning at column U on sheet "Partitions & Woodwork" began with a zero (0).
The number of spaces between rows being copied varies on the partitions & woodwork sheet but the columns (U - BC) are a constant every time a row needs to be copied.
Copy Cells To Empty Column Each Time And Remove Blanks
Oct 24, 2008Is there way i can have a macro attatched to a button that when clicked, will copy BX:BX on sheet1, remove all the blank cells and put it on D:D on sheet2. Next time it is clicked, it will put BX:BX on to the next available column after removing the blanks and so on, filling a column at a time on sheet2?
If the above is easy, it would be really good if it could paste into columns until it reaches column H and then go back to D again but paste below the data already there, then E, but below, etc. I think though that the last bit is asking a bit much and is just cosmetic and easier to print, so dont worry too much.
Copy Preceding Single Cell Data Into Following Empty Cells In Same Column
Sep 5, 2013I need a macro that will examine column A starting at A2 and working its way down copying the data in the first cell (A2) and then delete that row. If the next cells are empty (usually the next 5 cells) it should paste this copied value in each of the empty cells until it comes to the next cell with data in it. At this point it should copy this next value and delete the subsequent row and copy this value in each of the empty cells directly following (again, usually 5) until it finds the next cell that has data in it. At this point, again the whole process begins again repeating it self until it comes to the end where no more data is.
Here is an example of what I need done:
This sheet:
Sheet1
*
A
B
C
D
1
Item Number
Type
Type 2
Feature
[Code] ...
Should look like this:
Sheet1
*
A
B
C
D
1
Item Number
Type
Type 2
Feature
[Code] .....
Macro-Copy&Paste Fixed Data Ranges Into Last Empty Cell Of Specific Column
Apr 27, 2009I have rather large Excel file that spans around 245 columns & has multiple users responsible for certain columns. Columns are chunked to provide data about a specific group. Every 72 hours, I need to provide to managers what’s currently on this file in a specific summary format.
I’ve recorded a macro that gets me half way there. Here’s where I’m clueless. After my macro deletes unnecessary columns, what remains are the columns for “Main Data” group + each of the 5 “Business” groups (Investors, Lawyers, Credit, Finance, and Support) which would have identical column headings.
(1) Name (2) Address (3) ID# (4) Control#
Furthermore, for each of the 5 “Business” groups, there are 9 slots (ie- a user can enter up to 9 unique entries for a particular group.)
Example- The Investor group contains 9 slots. Each slot will contain the 4 columns mentioned above. So there are 46 slots in total – 1 for Main Data, 45 (5 groups x 9 slots) for Business groups.
MAIN DATA (columns A-D)
Investor1 (columns E-H)… Investor2 (columns I-L)… Investor9 (columns AK-AN)
Lawyer1… Lawyer9
Compliance1… Compliance9
Finance1… Finance9
Support1… Support9
MY PROBLEM: I need a macro to now cut & paste all data from each of the 45 Business groups slots & then paste at the bottom of the MAIN DATA slot.
The final file would be 4 columns (as listed above) wide. Data from each of the 45 business group slots would be one below the other- all of it underneath the data in the Main Data group.
I attempted to record a macro where I’m copying a section’s data range starting from row2 to row4000 (I know there will never be 4000 entries. I did this just to ensure that all future data would be captured) then pasting that after the last entry in the Main Data.
Example- I’d copy data from Investor1 slot(starting at column E2-H2) & go about 4000 rows down. Then I’d press CTRL+Down Arrow key in column A & then click the down arrow one time to take me into 1st empty cell where I would paste my copied data. I was going to repeat this process for the remaining 44 slots.
I’ve added some extra entries to test the macro & the problem is that the recorded macro is pasting data in specific cell location in column A instead for looking for the 1st empty cell in column A & then pasting the copied data.
So far I've gone thought the net & tried to paste in a few VBA posts/tips that I thought would work. Here's what I have so far from tinkering around. I need someone to tell me what to replace the xxxxxxx line with. This would be the language to tell Excel to paste copied data range into the first blank cell in column A. I've gone thought the net & tried to paste in a few VBA posts/tips that I thought would work.
Here's what I have so far from tinkering around. I need someone to tell me what to replace the xxxxxxx line with. This would be the language to tell Excel to paste copied data range into the first blank cell in column A.
Sub transposedata()
Sheets("ConsolidatedYTDReport").Select
Range("E2:H4202").Select
Selection.Copy
XXXXXXXXXXXX
ActiveSheet.Paste
End Sub
Find Empty Cells In Column And Auto Input Formula With Certain Criteria Using VBA
Apr 24, 2014i have the following code, what it does is, it locate those empty cells in column M and insert the formula "=TODAY()". What i need the code to do is only insert to the empty cells in column M if there is a value(as long as is not empty) in the reference cell of column E.
VB:
VB:
Private Sub CommandButton3_Click()
Dim wks As Worksheet
Dim rng As Range
[Code].....
Find Empty Cell In Column And Apply Required Character To Empty Visible Cells?
May 8, 2014I am looking to find all visible cells in column E that are blank, and then add ''B'' to those empty cells.
I am using code similar to the below:
[Code] .....
Is A Cell With A Formula Considered True Or Is It Empty If The Criteria Is Empty
May 30, 2009Is a Cell with a formula (like shown below) considered true, or is it empty?
=IF(Scorecard!$B$13,Scorecard!$AD$4,"")
If Scorecard!$B$13 was False...
Would a cell with the above formula be considered?
True or Empty?
If Scorecard!$B$13 was True...
A cell with the above formula would be True.
If Cell Is BLANK Then Look At Opposite Column Cell
Jul 10, 2009I have a column B which has the text "" in some cells where there is no value. I want a macro that will find a "" and if a cell has then I want the cell to equal to column A
for example ...
Make Formula Cells Empty Rather Than Empty Text
Apr 17, 2008Is it possible to make a cell "really" blank/empty based on an If statement? For instance:
=if(a1>10,a1,"")
Has a value_if_false of "". But Excel interprets this a bit differently than a cell that never had anything typed into it.
So if you have a column full of this formula copied down, and hit <control+down arrow>, you will go straight to the bottom and skip over all rows. Whereas if you have a column with values and empty cells alternating and hit <control+down arrow>, you will only skip the empty cells and go to the next value. Excel treats the conditionally empty cells as if they have a value, when it comes to this type of navigation. This holds even if you copy and paste "Values" for the cells over the formulas.
Is there any way to tell Excel to make the cells truly empty?
Excel 2010 :: Formula To Determine If Duplicate Values Exist In Single Column (excluding Empty Cells)
Jun 29, 20121 workbook, 2 worksheets (or tabs). On tab 1, I want a formula/alert that tells the user if any duplicate values exist in Column A of tab 2
Tab 2, Column A, has Unique ID's (6 digit numeric values)
The user manually inputs the ID's on new rows in Column A
Row 1 is reserved and in use for something else
Row 2 is my header, so cell A2 says "ID"
Row 3-623 currently contain unique ID's
When the user inputs a new ID into cell A624, then they return to Tab 1, I want my formula/alert on Tab 1 to tell the user that they have duplicates in Column A of tab 2. I know the Conditional Formatting, but if the user copies in 100 new values, they won't necessarily see the highlighted cells. My tab 1 is my "checks and balances" and the last place the user is suppposed to look to ensure that they haven't created any duplicate ID's. If the user sees a warning message that says duplicates exist, then I'll tell them that they need to look at column A (for cells that have been conditionally highlighted).
One issue that I'm running into with the conditional highlighting is that I want cells A3:A1048576 to already have the conditional formatting - this way when the user inserts a value into Cell A624, then A625, etc they conditional formatting is already there. Right now with data in cells A3:A623, cells A624:A1048576 are all highlighted with the Red/Bold Red Font (which is okay I guess), but ideally it would be nice to not count 2+ empty cells as duplicates and I'll have to have my formula on Tab 1 not include the blank cells.
I DO NOT want to use the Remove Duplicates feature of Excel 2010. If I remove them I could be removing data in columns B, C, D, etc that belong to the Unique ID. I just need the user to be told in Tab 1 that they DO have duplicates and I'll train the user how to research this and fix it.
The reason I want to look for duplicates in the entire Column A is because the list of Unique ID's will grow over time.
VBA Macro Code To Copy Cell A1 And Paste In First Empty Cell Down Column D?
Jul 30, 2013Is this possible using code: Copy Cell A1 and Paste in first empty Cell down Column D. This would be connected to a command button. Both Cell A1 and Column D are on the same spreadsheet.
View 3 Replies View RelatedUsing Month Function To Obtain Month And Copy It To Next Empty Column
Apr 4, 2013I am working in a spreadsheet that contains a bunch of data, it is not limited, and varies. It has some fiels such as: name, date of birth, address, and others. I am interested in creating a column with only the month digit of the date of birth for each row.
I have been working with some code, I am not quite sure how to continue. The following table would be a example that I have of the data, it has only to entry in the column of Date of Birth, but my data range will always vary. I want to get the month and past it in the next cell that is available in this case would be column c or 3... The worksheet name is REP.
VB:
Dim Cell As Range
' 1st cell with the posting date
Set Cell = Range("A2")
Do While Not IsEmpty(Cell)
If Cell = "Date" Then
[Code] .....
Alter Existing Formula To Copy Specific Cells In Row Instead Of Copy Entire Column?
May 1, 2014I need the macro to look at cells B9:B84 on the Sheet1 tab of the Cost Template. If it finds an x I need it to copy the 3 cells to the right of the x and paste them in a template. For example if it sees an x in cell B9 it would copy cells C9, D9 and E9, open the Purchase Order to the Detail tab, then paste it to cells B3, C3 and D3. It would continue looking for an x down to B84. So if it found 5 cells with x, it would give me 5 instances of the Purchase Order with 3 cells pasted into each.
I've attached my Cost Template and the Purchase Order it needs to copy to. In the Cost Template is a macro called Create_PO. This is what I was trying to alter to make this happen. I can't seem to get it right! FYI in case it matters, I had to change the Cost Template from .xltm to .xlsm in order to upload it on this site.
Opposite Of Concatenate
Sep 29, 2006I have 2,000+ cells containing text that I need to break out into multiple cells. They are names (ex. John M Smith MD) and I need each part of the name in it's own column. I need the opposite of concatenate.
View 3 Replies View RelatedFind Opposite Value
Jan 12, 2012I'm trying to find anything that does not equal my criteria in the Find (MI Only). I've tried using to no avail.
Code:
Set rngFound = rngToSearch.Find(What:="MI Only", LookAt:=xlPart, MatchCase:=False)
How to do this, or if it's even possible?
