I have a column B which has the text "" in some cells where there is no value. I want a macro that will find a "" and if a cell has then I want the cell to equal to column A
for example ...
I have a worksheet, example data below, it has 150+ columns and varying amounts of rows 1 -> 2500+ per column. The row data is as follows:
Row 1: Has title of worksheet
Row 2: Date of the column
Row 3: Total of completed for the day
Row 4 - n: Serial number
I need to intsert a new column to the right of each column and then populate it with the date at the top of the column from the left, I need the new date value to go down until it reaches the end of the data in the left column. So effectivly each serial number will have date in the column to its right.
There are no blanks in the rows, or blank columns.
Example of existing:
5/04/2007
35
100621090
104436159
104876402
462933606
Required:
5/04/2007
35
100621090 5/04/2007
104436159 5/04/2007
104876402 5/04/2007
462933606 5/04/2007
**Note date is in second column and taken from top of first column. Does not need to update if date is changed.
I have a spreadsheet that is updated daily with data that falls into one of two categories: a) completely new to the sheet or b) existing from the day before but not taken care of yet. The items which fall into category a are evaluated, and notes added to the sheet. The items in category b must be compared to the new data, and duplicated lines deleted but notes from previous evaluation must be kept on the sheet. In addition, anything on the sheet that is not included in the new information needs to be deleted. I've set up a sheet with all old and new data with dates the data showed up as well as the notes associated with the old data, and have concatenated all the info from each row into column V (from another suggestion I got on a similar but not exactly the same problem which I also still haven't figured out). The sheet has been sorted by col V so any matching rows should be within 3 or 4 rows of the original. The problem is that my code does absolutely zilch!
Sub DeleteRepeatedRows()
' goes through coord. sheet and identifies duplicated lines, copies the date from the old row
' copies it into the new line, then deletes the old line
Dim rCell As Range
For Each rCell In Selection
If rCell.Value = rCell.Offset(1, 0).Value Then
rCell.EntireRow.Delete
End If
If rCell.Value = rCell.Offset(2, 0).Value Then
rCell.EntireRow.Delete
End If.........................................
I need to find the value in cell range A:10 A:242 based on
the search criteria found in G:10 H:242
In Column A I have a number of differnet country codes and for 2 of them I want to change the value in Column B. For Example if cell A1 is = to "SHA" I want cell B2 to be "SHANGHAI". If cell A1= to "SGN" I want B1 to be = to "HO CHI MINH". If cell A1 is = to anything else I want the value to B2 to remain unchanged.
View 3 Replies View RelatedI am developing a Workbook where I import data to one worksheet and then disseminate it to other worksheets. I am not sure if I am overthinking the process, but I am having difficulty writing the macro and getting it to run through the entire list of rows.
There are 4 Columns in the one worksheet, named "Update":
Column A supplies the name of the worksheet that will be updated
Columns B-D contain the data that will update the sheets.
The process that I am trying to write the macro for is a follows:
1. Select/copy the range, starting with B1:D1 on "Update"
2. Navigate to the appropriate worksheet to be update, determined by A1
3. Identify the first blank row, starting with A5
4. Paste the data B1:D1 to A5:C5 (or next available line)
5. Navigate back to "Update" and begin the process again with the next row B2:D2
This process should continue until there is no value in Column B on the "Update" worksheet.
i need a code that moves down a column and for every empty cell in the column the cell to the left is cleared and then it moves on to the next cell down. the column is not always the same and will start from a selected cell, and the column will contain no more than 5 rows
View 3 Replies View RelatedI need a macro to find the last cell in the column, then copy the formula to the next blank cell. Then, it goes back to the last cell (above) and paste's values. Then, go to the next column and repeat the process. I can do this but have to call each cell separatly...however, I would like to do it in a loop to simplify things. It would be great to even be able to just set the start and ending columns. Here is my current code:
Dim rng As Range, aCell As Range
Set rng = Range("C8, D8, E8, F8, G8, H8, J8, K8, L8, M8, N8, O8, P8, Q8, R8, S8, T8, U8")
For Each aCell In rng
Selection.End(xlDown).Select
Application.CutCopyMode = False
[Code] .......
It does not go to the next column, instead it stays in the same column and repeats the process.
I want to get the text inside the cell which is to the left of the first blank cell of a column.
I show the problema in the attach imageSin tÃtulo.jpg
I want to copy a changing value from a cell (A3) to the next blank cell in the column creating a list of numbers for a total.
View 3 Replies View RelatedI need some VBA code that will allow me to copy the prior columns cell value into the current row if the cell is blank. More specifically if there is a blank cell in column D, then copy the adjacent value in column C to the cell. Hope this makes sence. I've attached a sample spreadsheet that shows my desired output.
View 3 Replies View RelatedI have checked archives, some similiar but not quite what I want.
In code below I want the output instead of going offset one column to right in same row to go one column to right into the next blank cell.
I am looking for a Macro that will search a column for blank cells, and when one is found will add text to the same row in another column. For example: The below is a spreadsheet. I am trying to find something that will search through column "C" in this case and add text (of my choice) to Column "A" if the cell is Blank. So Since cell C1 is Blank then Type "ERROR" is cell A1.
A B C D E
1 X X X X
2 X X X X
3 X X X X X
4 X X X X
5 X X X X
code to copy a cell formula all the way down the same column to the cell where its next immediate row is completely empty.
View 6 Replies View RelatedA
B
1
Name
Action
2
Joe
Created
3
Bob
Approved
4
Cindy
5
Jane
6
Dave
7
Imagine column A sorted by invoice numbers. Column B has payments applied but due to movement between unapplied cash, some numbers appear as negatives and positives for the same invoice number.
I want to have a formula which says that for each invoice number, look in column b and eliminate opposite numbers and post only unique values. Keep in mind that there may be multiple lines with the same invoice number.
For example, starting with line 5, for invoice 123, payments 400 and -400 in line 5 and 17 and payments 315 and -315 in lines 7 and 9 will zero out but any other unique payment will be picked up and displayed in column C. Lines 5 and/or 17 will be blank in column C.
I have a data in a column B, from B17 to B1000. the data looks like:
0.1
0.5
20
15
16
20
10
I want to get the last non-blank cell (in the previous example = 10), and the one before it (20), and the one before it (16).I mean I want the last three non-blank cells. I used =INDEX(B17:B1017,MATCH(9.99999999999999E+307,B17:B1017)) to bring the last non-blank cell. I'm using excel 2003, but it's OK to use Excel 2007 if it will solve the problem.
I have a range name called 'Dates' that I need to copy to another column, however in the range name not all cells are populated (however there is a formula that specifies if a cell is blank).
I am trying to record a macro that will take me to the next blank cell in the column I am copying to, but when I go to a cell at the bottom of the column then press 'End' and the up arrow I am taken to the cell that is the equivalent of the bottom of the range 'Dates', even though this is not the next blank cell.
How can I get it to go to the next blank cell in this case?
I want to populate a row with text "OFF" if a cell in column A is blank, I need the text to be from column F to Column S, I have a bit of code that finds the blank cell in column A and populates the cell in column F, modifying it to extent to column S.
View 2 Replies View RelatedI will be moving to a specific cell - "N1". I'm looking for code that will then scan down from that cell, making the first blank cell the active one.
View 4 Replies View RelatedHere's what I tried using macro recorder...
View 4 Replies View RelatedI want to select the first blank cell in the first blank column. I would just look at the column and instruct it to select a given range, but each month the blank column will change (by moving one to the right).
So for example
This Month:
Columns A-Q all have data in it. So, I would need to select cell "R1"
Next Month:
Columns A-R will all have data in it. So, I would then need to select cell "S1" Need code to auto-detect the blank column and then select that column's first cell?
How would I do a vba for finding a blank cell in column D, and when a blank cell is found, delete and shift up cells D through N on the same line?
View 2 Replies View RelatedI am have data in as shown below where there a number and few blank cell. I would to write a macro that loops through the column and merge blank cell with cell nonblank cell above.
20085
blank
blank
20086
blank
blank
blank
blank
blank
20087
blank
20088
blank
blank
20089
i need the vba code to
paste into last blank cell of column A
I am looking for a way to find the first blank cell in a column.
Range("A2").End(xlDown).Offset(1, 0).Select
The problem is that there are no 'blank cells because they have a formula in them that checks a different sheet for data. If there is data then it simply copies that data. If there is no data then the value of the cell is "". So the cell shows blank but in fact it isn't.
So how do I find the first cell that don't show data because of the formula that resides in the cell? Here is the cells formula..
=IF(Data!J2"",Data!J2,"")
Starts in A2 through A151
I need a code that will delete an entire column (J) if J6 is blank.
View 3 Replies View RelatedI have a macro that copies data from 1 sheet to another one.
However, in the destination sheet I have no way of know which is the 1st empty row that my data can be paste into.
For example, In excel in cells A2 to A56 I've got words in them, I wanted to copy all the cells in column A to B in same order,but when the word "check" is encountered, a blank cell will be added below the cell with the word "check". How can I do this?
View 9 Replies View RelatedI want to cut a range from one worksheet, and then paste it at the end of a column in another worksheet.
I have tried this
Sheets("Latest Results").Select
Range("b5:b500").Select
Selection.Cut
Sheets("Archived Results").Select
Range("A500").End(x1up).Offset(2, 0).Select
Selection.Paste
