Routine Taking Ten Minutes To Update
Apr 15, 2006
Private Sub Worksheet_Change(ByVal Target As Range)
Dim rng As Range
Application.EnableEvents = False
If Intersect(Target, Range("E:E")) Is Nothing And _
Intersect(Target, Range("H:J")) Is Nothing Then
Exit Sub
End If
Is there a way to make this run a little slicker , as at the moment it is taking almost 10 mins to update RngDate is $L6:$FB1038
View 9 Replies
ADVERTISEMENT
Feb 22, 2007
I am in the process of re-building a major project due to bugs. In the process, I plan to re-organize my sub-routine grouping within modules. In the source file, I have 18 standard modules, with 10-30 routines in each one.
What I would like is a printout of each routine name and which module it resides in, so I can check off each one as I copy it and paste it into the new file. I see that I can get a psuedo tree-view of my project in th eObject Browser, but can't figure out how to print that.
View 9 Replies
View Related
Feb 17, 2014
trying to get pivot tables to automatically update every 4 minutes.
I have 3 worksheets:
worksheet 1: SCANNER, this sheet pulls in data externally using an =RTD links
worksheet 2: RAW, this manipulates the data above, and this is the data used to create the pivot tables
worksheet 3: SUMMARY, the pivot tables are here, there are 9 of them.
Worksheet RAW, changes every so often, and every 4 minutes I would like to have the pivot tables AUTO REFRESHto make sure its using the latest data from RAW.
I see options to autorefresh on the opening of the workbook, but cant see anything to REFRESH EVERY X MINUTES.
Is there any way to do this with VBA ?
View 3 Replies
View Related
May 25, 2011
I have a spread sheet with a colum showing average time to complete a task. This is currently shown as Days:Hours:Minutes:Seconds (4:19:33:19). I meed it to be shown purely as minutes, or at least as hours and minutes.
View 4 Replies
View Related
Dec 5, 2006
I have a formula which will calculate the number of hours and minutes between two military times. I would like it to calculate the total number of minutes instead of hours and minutes. I have uploaded a small example of what i have so far.
View 3 Replies
View Related
Jul 4, 2006
What formula will convert 4.50 to 530 minutes ( "Decimal Time" )
another example 16.50 to 1250 minutes.
View 13 Replies
View Related
Jan 21, 2009
I'm trying to convert 3786 minutes to day:hours:minutes. So divided it by 1440 which is 2.63... but I want this displayed in the worksheet as 2 days 1 hour and 3 minutes (02:01:03), I just can't seem to get it to work and it seems quite simple... but I'm missing something.... I was trying a custom format like dd:hh:mm or [d]:hh:mm and I was also trying a convert function and =day/1440+hour +minute
View 9 Replies
View Related
Aug 22, 2006
creating a formula for converting time data that has been created in an excel spreadsheet in minutes i.e. 516 minutes which I need to turn into Hours and Minutes i.e. 08:36 I am not experienced using Formulas, apologies if this question has been posted before, I did use the search facility to look for threads, but could not find anything related
View 5 Replies
View Related
Jul 4, 2007
I have a worksheet which I am trying to format as a template which includes inputting start times and end times of work and calculating how many minutes are taken to do the job. I just can seem to find the correct formula.
View 9 Replies
View Related
Jun 7, 2014
Here is what I am trying to do: I have 30 duplicate worksheets that I enter data every 3 months. I have a macro that clears certain fields and copies data from one field to other and I run this macro after selecting each sheet one at a time. How can I create a macro that will run this macro from the 1st sheet through to the 30th sheet in one click. My macro is called Clear_data.
View 12 Replies
View Related
Jun 24, 2014
I have a macro file
when I run the macro it activates a sub macro called: Find_Empty_cells_win
when this is run it picks up a empty cell in Column G
When this happens I get a Msgbox prompt and then I click on OK.
After this it continues on to the rest of the code.
How do I completed exit the vba coding right after I click on OK
View 5 Replies
View Related
Feb 20, 2009
All I want to do is to stop a routine when I press the Cancel key on the user form that the routine called. I have tried "stop", "quit", "end", "abort", et. al. This seems so simple but I cannot figure out how to do it.
View 7 Replies
View Related
Jun 13, 2014
I have an add-in that can run the code below. It works fine, however, I need it to run whether there is just one row of data, or 100 rows of data. I have headers, so the first row of data starts in row 2, and the last no matter what will be in row 100 (so 99 rows of actual data technically). There are usually only 10 rows of actual data as the rest are usally set to blanks with iferror. The code below works, but I need it to run for however many rows of actual data there are.
View 1 Replies
View Related
Feb 4, 2014
I've got three workbooks that end users will be using for data entry. The VBA code for the three workbooks is identical.
I'm trying to encapsulate the code into an add-in so I only have one copy of the code that I have to debug/maintain.
Furthermore, I've also encapsulated the code in the add-in into a class. The class isn't really a "usual" object modelling some data; rather, it's a utility class processing Worksheet_Change and Worksheet_Activate events. Hopefully this isn't a really bad idea, rather than keeping the code in standard modules in the add-in.
The application is called "Midas". Here are some code excerpts:
Midas.xlam:
Standard Module:
[Code] ......
Class Module:
[Code] .....
And in the end user workbook:
[Code] .....
The Wbk_SheetChange event handler is triggering, but it's looking for the code in the end user workbook, instead of the class. Is there a way I can change
[Code] .....
to call the private routine "Cases_Changed" (where "Cases" is the sheetname) residing in the class instead of looking for it in the workbook?
View 4 Replies
View Related
Nov 3, 2009
I have 2 subs routines in a mod. I have declared the two variables at the top of the sub. However when I call the second sub the variable's are not passed along.
Here is an example script. All in one mod. I have taken out the junk in between to help edit the problem.
I'm looking to pass the same bnumber and dnumber to the secound sub.
View 2 Replies
View Related
Nov 6, 2009
How do I have a workbook execute VBA code when I hit 'Enter' anywhere on a specific sheet? I don't need the code to execute when I hit 'Enter' on any of the other sheets in the workbook, just a specific sheet.
View 11 Replies
View Related
Dec 12, 2011
I've written a Sub that separates words in a sentence into columns in an excel worksheet and it works perfectly. I can't however convert the convert it to a function procedure. when I do so I receive a Circular referencing problem or upon making necessary corrections to prevent circular referencing, I get the Excel #Value error. Here's the code:
Function TextToColumns(Txt) As String
'
' Enters Text Separated By Spaces Into Columns
'
Dim i As Long
Dim k As Long
Dim cell As Range
[code]......
View 1 Replies
View Related
Dec 17, 2012
I currently have a macro that runs every 10 seconds. This macro calls 5 sub-routines.
Code:
Public Sub Copy_Data()
*****code****
*****code****
*****code****
*****code****
Call SortData
Call Create_OutOfStock_File
Call Create_NearEmpty_File
Call Create_InStock_File
Call Create_Other_File
Application.OnTime Now + TimeValue("00:00:10"), "Copy_Data"
End Sub
I need to keep the current code to run Copy_Data every 10 seconds, however, i would like:
Code:
Call Create_OutOfStock_File
Call Create_NearEmpty_File
Call Create_InStock_File
Call Create_Other_File
To be called/run every odd minute, for example, 00:01:00, 00:03:00, 00:05:00
View 6 Replies
View Related
Apr 8, 2014
I am writing a lot of code and have separated each section in different modules For example, I have one module titled OpenR2D2 and another titled StoreName
I want the sub in StoreName to run at the end of OpenR2D2 but I get this compile error "expected variable or procedure, not module"
Here's the end of the code where I put it. What have I not thought of?
ThisWorkbook.Activate
Range("B9:G9").PasteSpecial
R2D2data.Activate
Range("B7:G7").Copy 'Sch Actual VLH
ThisWorkbook.Activate
Range("B12:G12").PasteSpecial
Call StoreName
R2D2data.Close Savechanges:=False
Application.ScreenUpdating = True
End Sub
View 4 Replies
View Related
May 2, 2007
I am trying to develop a routine that will save the file I am currently working on, then save the current tab as a *.csv file with the name equal to cell "C1" in the same directory as the original file. Then I would like it to close the .csv file and reopen the original file all while being generic with the naming so that if the file name and location changes, the script will still work. I recorded a macro to get me started.
View 9 Replies
View Related
Oct 9, 2007
I have a macro that formats an imported report and I have inserted it's code into several other routines I have written.
Since there is always the possiblity of changes occurring, is there a way to refer to this macro in a second (or third or fourth) routine so that if a change has to be made to the original macro, I won't have to change it everywhere?
View 9 Replies
View Related
Sep 29, 2009
I received a great little routine from you guys to a question which was a follows
Can Excel do this?
I have a huge spread sheet - The formulas in each cell reads as follows:
='[1.xls]Community Libraries'!$A$9. I would like to copy the cell all the way down the column, but only 1.xls must change to 2.xls and 3.xls etc. Can Excel copy this way?. I'm using Excel 07 on this pc
The response was:
Sub PutFormula()
For i = 1 To 80
Range("A" & i).Formula = "='[" & i & ".xls]Community Libraries'!$A$9"
Next
End Sub
Can this be modifed to:
A) Start on row 6 and end on row 85 of each Column A to CZ
B) Modify the end bit of the formula as follows Community Libraries'!$A$9&"/10"
View 9 Replies
View Related
Feb 27, 2010
I have a useform with about 30 Text boxes for user input.
when the user exits the box I want a validation check routine.
I need to verify 4 things.
1. That the entry is numeric.
2. Thew at the entry is above the minimum.
3. The Entry if below the maximum.
4. Number of decimal places.
Since I have 30 boxes and will be adding more in the future I need a Subroutine.
Here is what I have (I know it does not work - I need help with the syntax.
Code: .....
View 9 Replies
View Related
Apr 10, 2007
Userforms Causes Sub Routine To Exit ...
View 9 Replies
View Related
Feb 11, 2009
I am trying to complete a toolbar that will lock and unlock all the sheets in a workbook. While I can set the password automatically I'd like to have the macro ask for the password instead of hardcoding it.
Here is the code I currently have and works so long as I have already set the password in the workbook to match what is in the macro
View 3 Replies
View Related
Apr 14, 2009
I have a Sub test where I think can be setup in an Array or a shorter sub routine, how to shorted this routine. Ths routine was designed to check your Computer and depending if you are one of the selected on will the unprotect the sheet.
View 2 Replies
View Related
Dec 10, 2009
I want to thank you all for the solutions/support I received in completing my (for me) difficult workbook.
I still have a tricky problem. In the example below, can Multibeep "know" when it is being called from Beep versus being excuted directly? And if so can I direct a different sequence?
View 10 Replies
View Related
Nov 1, 2012
In my code I am using several variables to create a concatenated string and this is making my code quite lengthy..Now I have manged to use it in the SELECT CASE but it still remains big..
SO I was thinking if it were possible to break it into smaller parts and create a Sub-Routine which can be called in the Main code in the select case for the specific condition this way I can use it in Multiple places without hassles..
find the code which I need passing the variables..
Code:
Sub Condition_I()
Dimm Search_Value as string
Dim INo As Long
Dim Whole_Text As String
Dim Lookup_No1 As String
Dim Lookup_No2 As String
Dim Condition_I_Text As String
Dim WksI As Worksheet
[code].....
I need to pass the Search_Value from the Main Code and also the whole_text back to the Main Code..
View 9 Replies
View Related
Aug 16, 2007
How can I edit the following code. If the "Dload" tab is not there the code errors out. How can I make it so that if the "Dload" is not there the macro says "Dload tab missing. Do you want to check file and try again" If the user says yes. then the macro lets the user pick another file. If the user chooses No then does similar quesiton like I have here starting with
OpenA.Activate.
ChDrive "E:"
ChDir "E:2007 WorkAnalytical ReviewBalance Sheet"
View 9 Replies
View Related
Aug 23, 2008
I've posted the simple sheet elsewhere and others report that the sheet and routine works fine for them. The exact same sheet that is failing for me.
The algorhithm itself works for me too - everything is parsed correctly and the proper range successfully receives the .ClearContents command. It's just that, on my sheet, nothing happens.
I have the entire book and sheet unprotected, all the cells unlocked, and permission for all macros to run. I.e. I've removed every possible "excel-level" roadblock I can think of. I've tried restarting Excel, even rebooting -- all with no luck. The page still doesn't work.
What other possible settings might be causing the consistent failure when I try to run the sheet whereas other users (reportedly) have no such problem with my VBA routine and their identical copy of my sheet?
Private Sub Worksheet_Change(ByVal Target As Range)
Dim n As Long
Dim clearTable As String
Dim clearTrigger As String
Dim clearRegion As String
With ActiveSheet
clearTable = Range("ClearRegions").Text ' Get clear table.................
View 9 Replies
View Related