I have a macro that formats an imported report and I have inserted it's code into several other routines I have written.
Since there is always the possiblity of changes occurring, is there a way to refer to this macro in a second (or third or fourth) routine so that if a change has to be made to the original macro, I won't have to change it everywhere?
I am in the process of re-building a major project due to bugs. In the process, I plan to re-organize my sub-routine grouping within modules. In the source file, I have 18 standard modules, with 10-30 routines in each one.
What I would like is a printout of each routine name and which module it resides in, so I can check off each one as I copy it and paste it into the new file. I see that I can get a psuedo tree-view of my project in th eObject Browser, but can't figure out how to print that.
Here's an array I have that is filled with values that come from a worksheet. I'd like to have it so that once this array is full the code that fills it up (see below) gets skipped on subsequent runs of the subroutine. What's a good way to do this? Seems like when I Dim the Array it gets blanked.
Code:
'Fill Bulb Array with House number (j) and Bulb Wattages
j = 1
Do While j
I have always saved each macro on a single workbook, saved the workbook using the macro name, so I can go use that spreadsheet for a specific issue. Now, however, my job role is changing to where I have to do a lot of things like get a file from Bob . . . slice and dice and then forward it on to Carol, etc. Then I have to save spreadsheet A to this directory, spreadsheet B to that directory . . . .
I am sure there is, I just can't get my head around it to have one spreadsheet that has ALL my macros that would be available to me on other spreadsheets? I tried using "show macros in all open workbooks"
I currently have a 70 page spreadsheet with similar data that needs representing in pie chart format. All the column headers are the same and I only need 2 columns (A and T).
There are however different numbers of rows. Is it possible to write a macro to detect the number of rows before it draws the relevant pie chart (I've managed the pie chart bit!!)
See attached example, same concept but cant post real data.
I have a userform that has the same type information on 3 different entities (name, address, phone, etc). The same research is required on each one i.e. you need to look up the zip code for each). Therefore I have a bank of buttons on each page of the multipage form. Each button does the same thing depending on which page you are on. The following is my code to copy some information and open another application depending on which page you are on and which type entity.
My question is how can I combine these into one so my module is not 3' long.
If I want to create a function or sub that can be used by any userform or macro that I create for a workbook:
Where would I define that function? Within the Module?
Do I define it as Public?
I am trying to run multiple macros from multiple workbooks. I've figured out how to open each workbook, but I can't figure out how to run a certain macro in each workbook called "Main".
View 3 Replies View RelatedI have been asked to create a spreadsheet that has a front sheet where you can free type search criteria and then it will populate rows below with all search results from the remaining sheets within the workbook, for example;
In cell N15 I type the search criteria and hit a button
In cells F31-O31 it returns the following information;
CategorySub-CategoryCourseDrop Down Option 3SolutionFurther information or support
I have little to no experience in writing macros
This report spreadsheet is exported from SAP. Since SAP has a limit number of displaying the columns, there are 40 headings (= 40 columns) in the report has been broken down to 4 rows of headings.
How to use macros to move 3 those extra rows to one row and the number still matches each column? I also attatch the file for reference.
I am using the code below to open multiple workbooks in their own instance of Excel.
On my system, as well as most of the ones I've tested it on, enabling macros in the "parent" workbook, i.e. the one that contains the code, leaves them automatically enabled in the new session of Excel, as though the settings are carried over.
However, recently I've found a few systems where this is not the case. Enabling macros in the parent workbook opens the others, and then I have to enable macros again in each of the new sessions. Is there a way to fix this? All of the systems mentioned above have macro settings set to "disable with notification" and this cannot be changed.
I'm having difficulty assigning multiple macros to an active x combo box. I want a different macro to run every time the user selects a different location from the combo box. I can assign one macro to the button no problem, but don't know how to incorporate more. The two separate macros I want to run are:
Sub Atlanta()
'
' Atlanta Macro
[Code]....
I have 3 different sets of macros and i want to Join them together so i only have to run 1 macro to do all 3. I am not sure how the best way is to do this.
Code 1:
Code:
Public Function UserName()
UserName = Environ$("UserName")
End Function
Private Sub RefreshTeamQueryOnWorksheet(worksheetName As String)
[code]....
I want to be able to run this many times looping through different file names. The only thing that changes between file names is the number.
Application.Run "'C:Documents and Settingspadi4545DesktopProjectRuns10.xls'!main"
ActiveWorkbook.Save
ActiveWindow.Close
Is there a way to automate the importing of macros into a list of files ? I have a number of files that I want to add some code to and was wondering if this could be automated as opposed to adding the code to each file manually as it's going to be a regular job.
I've written a routine to loop through the list of files and open them, I just want to know how, if possible, i can automatically import the required macros.
The code from this page works perfectly when I am running one macro at a set interval: [url]
However, when I try to run multiple macros at different set intervals the order of execution gets messed up.
For example, I need macro1 to run at 00:00:30, macro2 at 00:00:45, macro3 at 00:01:00, then macro1 at 00:01:30, macro2 at 00:01:45, macro3 at 00:02:00 and so one.
I am facing an issue where my macro is unable to open multiple files and run the macros in it. Below is the code that i am using and it stops at boss1.
VB:
Sub allboss()
Call boss1
Call boss2
End Sub
[Code] .....
I have attached an example spreadsheet with two tabs. The first tab (Matrix) shows raw data scores - there are 28 measures in Column A and Participants in Row 1. There are always 28 measures but participants can vary. What I need to happen is to sort each measure in a Lineup tab i.e. rank all the participants listed in the Matrix tab from lowest score to highest score for each of the 28 measures. Obviously this can be done manually but a VBA/macro solution will be so much faster and easier. Unfortunately I have to keep the data in this format so the macro will need to transpose the data to get into the formt in the Lineup tab.
View 9 Replies View RelatedI am trying to create a Macro for taking information from a master sheet "sheet1" and dumping it into another worksheet based on a single variable in "sheet1". I have attached the excel workbook for reference. In detail, I would like to pull all of the rows where cell "F" in "sheet1" equals "1" and dump them into the new sheet titled "Dept1" with the same headings. The same for all rows where cell "F" in "sheet1" equals "2" to dump into the new sheet titled "Dept2".
View 6 Replies View RelatedI have a workbook that I would like to share and allow multiple users to add and make changes at the same time. However, the workbook is full of macros that really need to run. Is this possible? The workbook is written in excel 2003.
If this is not possible then is it possible to share the workbook in a similar fashion but not allow any other users to make changes, but update their workbook with the changes that I make?
I have 6 macros recorded and I need to create a drop down list of macros so that I know what kind of Macro I am using.
View 9 Replies View RelatedI have a dynamic set of data, loaded from a server. The columns are FIXED. I will attach a sample of how the data looks.
site_code
report_goup
asm_week
[Code].....
I don't know how to attatch a file here, but the first row is the title row, under it are the values. The columns here are fixed. What i NEED to do, is somehow create something that will make a seperate graph for every different PLATFORM , showing the FPY chaging over time. Time here is the weeks which will always be a rolling 12 weeks. I'm thinking that i need to use MACROS to do this, but i'm not sure where to start.
Is it possible to create 1 macro which will execute multiple macros on different sheets?
I have approx. 12 macros that I can run in order, and I would like to create 1 button on the first sheet of the workbook to execute all 12 macros, which are contained on various other sheets. Is this possible?
When I attempted to do this, the master macro ran an odd function on my first sheet.
I have 3 seperate macros (macro1, macro2, macro3) that have to be run in order. Is it possible to create a macro to run them in order and what would the code look like? I will have it assigned to a button on the worksheet.
View 9 Replies View RelatedHere is what I am trying to do: I have 30 duplicate worksheets that I enter data every 3 months. I have a macro that clears certain fields and copies data from one field to other and I run this macro after selecting each sheet one at a time. How can I create a macro that will run this macro from the 1st sheet through to the 30th sheet in one click. My macro is called Clear_data.
View 12 Replies View RelatedI have a macro file
when I run the macro it activates a sub macro called: Find_Empty_cells_win
when this is run it picks up a empty cell in Column G
When this happens I get a Msgbox prompt and then I click on OK.
After this it continues on to the rest of the code.
How do I completed exit the vba coding right after I click on OK
All I want to do is to stop a routine when I press the Cancel key on the user form that the routine called. I have tried "stop", "quit", "end", "abort", et. al. This seems so simple but I cannot figure out how to do it.
View 7 Replies View Relatedis to display a set of data based on filtered information.
My Data base:
Company Department Name
A X John
A Y Joe
A X Jane
B Y Bob
C Z Kate
A X Kerri
Based on user selection of Company and Department, I want to be able to display the relavent names.
If user chose Company A, and Department X, I want to be able to display
John
Jane
Kerri
I've used the ROWS, Index, Small combination that works perfectly (Please see sample below). However, since the this software doesn't support the ROWS function, and doesn't support Macros.
I'm new to Macros and below is my requirement.I need to split my data into multiple rows based on count and the first row should have the value but the other rows should have a value as zero.
Input
Count Value
1 400
2 101
3 300
4 450
Output
Count Value
1 400
2 101
20
3 300
3 0
3 0
4 450
4 0
4 0
4 0
I'm trying to synthesize a fair amount of averages response time data from about 300 separate worksheets into one master sheet and I'm wondering what the best way is to do it using Excel's macros.
In each subject condition-worksheet there are 24 cell items that need to be pulled and put into the master worksheet; there are 2 conditions, for a total of 48 line items.
In each subject file, the subject number is in cell A1, my first desired average is in M7, then M15, M23, M31, M39, M47, M55, M63, then it repeats back to M9, M17, M25, etc..
How can I create a macro that creates a new line for each subject (starting with row 2) first with their subject number (A1 in all subject files), then M7, M15, M23, M31, M39, etc. moving across the row?