I want to select an automatic colour scheme (font) for an Exel sheet. It has 3 columns with values. If the coloums are A, B & C I want to mark the higher value in red. If B is higher than A, B should be red. Again if C is also higher than B, then C also should be red... like that. Values should be read row-wise. How can I do this using a formula?
View 1 RepliesHow do you import a color scheme from another workbook in Excel 2010? I could do it in previous versions....now I don't know what to do.
View 3 Replies View RelatedI am trying to use VBA in Excel 2007 to change bar chart series colors. I have found a few posts that link it to a cell background, but I'm struggling to find one that does the font color.
It would be great if I could change the bar chart series to match the color of the text in the A column, so that if I highlighted the value in A1 and changed the text color to orange for whatever reason, the chart updates the value of 1.2 to an orange bar (see below).
T. A1 B1
Sample 1 1.2
Sample 2 2.1
Sample 3 1.7
Sample 4 5.6
I'm trying to pick up the Excel application color scheme setting from code. What I want to do is set a VB.Net COM add-in form's skin based on the application color scheme so that my Add-In matches the users color settings blue/silver/black. Where is the application color scheme setting stored? I have searched the registry but with no luck and the Excel 2007 setting isn't picked up when I record a macro...
View 3 Replies View RelatedI'm not sure what I have done but one of my workbooks colour scheme has changed. When viewing the workbook cells are now grey and the lies are a lighter grey. When printing though it prnts as it would normally ie a white backgorund. It looks like the viewing colours have been reversed and I can not find out how to revery back to normal.
View 3 Replies View RelatedI can create emails with Outlook in VBA (Excel 2010), but can't find how to select the font, font size and font colour I want.
View 9 Replies View RelatedUsing excel 2007. In a A table of marks obtained by a student. I want to get the content of the cell be displayed in a bigger font and in a particular color when i point to it. When I point to a cell content the display should be in a color of my choice say green and the font be greater than 20 pixels.
View 1 Replies View RelatedIn Excel 2010, you can color a cell with a fill color and a font color.
It can be done manually via one of 3 methods that I know of (aside from a macro or a routine):
-From the ribbon button (underneath the font size and increase and decrease font size toolbar buttons)
-By formatting the cell (right clicking on a cell),
-Clicking on the ribbon's font section (giving you the same 6 category format cell box as right clicking on a cell)
What I need is a routine that resets the Fill Color and Font Color toolbar buttons to "No Fill" and "Automatic" if I run it inside a macro or create a command button on a worksheet.
How do I copy a colour scheme from another work book in Excel 2013? I could do it in 2010 but can not work out how to do it in 2013..
View 4 Replies View RelatedSo I have a guest list workbook. There are two sheets. On the first one is a list of names on Column A. On Column B is a classification: 'C' if confirmed; "D" for declined; "I" for pending. I want to have all the names with "C" on sheet 1 appear on sheet 2 automatically.
View 4 Replies View RelatedI have attached the relevant spreadsheet for which I need to alter the color of the columns based on Site number ( Sheet 1). % Mortality will be represented in the Y-Axis, and the Site numbers would be on the X-Axis. All columns (% Mortality) except one will be of the same color, and the one of a different color will indicate a specific site. As an example, site 86 is colored differently. The way I require the chart to look is shown on Sheet 1.
After reading through some great posts on Ozgrid, I managed to do this using conditional formatting (Sheet 2), but that sort of falls short because I am required to add a data table to the chart, and the parameter that is indicated by the column bars happens to appear twice in the data table.
I was wondering if this can be automated maybe using VBA, but with the possibility of simply matching the color of columns with the font color of respective entry in the data series.
I have two columns. The first one (A) contains cells that have different Fill colors. The second column (B) contains text adjacent to the colored cells. I am trying to change the color of the text in the second column (B) to the corresponding color in the adjacent cell in the first column (A). I don't think conditional formating works well in this situation. I believe the solution would be some sort of macro.
View 3 Replies View RelatedFor some reason the fill color and font color no longer work! If I set the font color as red, it continues to show up as black!
This is the strangest thing! I have no conditional formatting set and this just started a week ago.
I have font color white in blank cells in column E and I (from row 5 to row 245) so the visitors will not see the text. If any of these cells become yellow (color code is 6), the font color will become black so visitors can see the text alot far better than white. I've tried this code myself after this post but nothing happen
View 4 Replies View RelatedI have a spreadsheet that i download from the net daily, which is seperated into columns of information.
I want to be able to look down a column and mark a cell in a seperate column if the cell font text is red.
For example looking down column A ... if the font text of a1 is red then mark the cell background colour of T1 red - if a2 text colour is red then mark the cell T2 red .... etc etc.
If the font colour in a1 or a2 ... etc etc is any other colour then do nothing.
I have 5 columns I wish to look down and mark in 5 seperate columns - I have tried to do this by conditional formating but don't know the fomula for checking font colour.
I have a udf that returns a string to the cell. The string is made up of multiple string "objects". What I am wondering is if I can set the font color of certain objects so that when the final string is built and returned, the font of those portions is set.
Ex. of simple idea (this is not actually my code, just a way to illustrate. I realize there is no point to this UDF):
VB:
Function StringReturn (Str1 As String, Str2 As String, Str3 As String) As String
StringReturn = Str1 & Str2 & Str3
End Function
Now what if I wanted Str1 and Str3 to be blue, and Str2 to be red for example. So that when the UDF calculates it would return: Str1Str2Str3
How do i do the automatic linking on the excel sheet like the one done on the following example
Book1.xlsx
I would like to have cells that conditionally format the font color in the cell based on the background color of the cell. Essentially I have a matrix with some cells highlighted in red, yellow, or orange. There are values in each cell of the matrix. If a value is 0 I want the font to be grey. If the value is NOT 0 AND the cell backgorund color is NOT white, I would like it black and bold. Is there any way to do this in excel or using VB?
View 6 Replies View RelatedIn excel 2000, I am trying to count the lines in a spreadsheet that has the first cell in each row highlighed in yellow. Additionally, I am trying to count the number of rows that has a red font used in the cell in column D.
I have reviewed other posts by searching counting highlighted cells, but I do not understand how to complete the entire process. One of the suggestion was to create a vb script in combination with using =cellindex(??). I do not really understand how to create this, name it and the run it.
when we insert a jpeg image into a excel sheet the font on that page looks fuzzy.
View 2 Replies View RelatedAt work I have a register/log. Its just a printout of a standard format in excel sheet. I print a month of sheets at a time and write the day and date on it by hand at the top. Is there some formula in excel by which it prints the dates as well in a progressive manner. Eg. If today is 29th May 2014 and today I print 30 copies of the register/log. The first copy has todays date on it and the the next one had tomorrows date....and the 30th copy automatically has the end of April 2014 printed on it.
I've found this code but cannot get it to work.
My workbook is called Shift Log, the worksheet is called v2 and I'm using Excel from MS Office Professional Plus 2010 (32bit)
#Private Sub Workbook_SheetBeforeDoubleClick(ByVal Sh As Object, _
ByVal Target As Range, Cancel As Boolean)
Dim sDate, i
retryDate:
sDate = InputBox("Enter the starting date, or click 'OK'" & _
" for the current date", "Start Date")
[Code] .........
I work for one half of a joint venture & am responsible for planning & expediting. The other half does purchasing. The bi-weekly PO download reports I receive are less than useful. I have already written the code to delete undesired sheets & add, format, and enter headers for a "Summary" sheet.
I need code to move to the next row, and run formulas to pull data from the next sheets, and repeat until there are no more sheets.
The number of sheets will vary from one download to the next, and the sheet names will vary from one download to the next.
Following are example formulas that need to be run on successive rows while pulling from successive sheets.
I am running Excel 2013 on Windows 8.1
I have a spreadsheet which has some cells with blue font. If anyone tries to manually change the contents of these cells a worksheet change macro reads the colour index of the font and, if it is 5 (blue), uses "application.undo" to repair the damage.
When I use the sheet on another computer, the same font colur is being read as a four digit number, 4015 I think from memory, and the code doesn't work.
I have a script that sets font color. I think it uses something called "myColor" to define the color, and then pulls the color from a palette of 57 colors.
But how can use the "color" property instead, so I can have a broader range of colors? I can't tell how it would fit into my code. "MyColor" doesn't even show up in Excel's help file.
Here is the code. How can I adjust it so that I can use, like, "RGB 0, 0, 255" instead of color 32?
Or how would you code it so you could set color that way?
Private Sub WorkSheet_Change(ByVal Target As Range)
If Target.Count > 1 Then Exit Sub
If Target.Column < 8 Then Exit Sub
If Target.Column > 9 Then Exit Sub
Dim myColor As Variant
Select Case Target.Column...........
try explaning this again....Also conditional formatting will not work...
Looking for a formula in excel to do this---
I have a lottery numbers system in the 3 digit and 4 digit
numbers...In row A we have the 3 digit that were drawn about
3000 ---3 digit numbers and in row C we have also 3000 numbers
for the 4 digit ....All we need to do is Highlight All the
even numbers and make them RED font---in the 3 and 4 digit rows...
Is there a way to do that?????
A--row-----C--row
123---------4429--make the 2red in the 3 digit row and 442red
in the 4 digit row.
033---------5579--nothing in this row
229---------2200---etc....
If there is any function countby color?
View 9 Replies View RelatedI am just looking for a keyboard shortcut macro. I change the font color in rows one at a time to either blue or red by selecting that row and using the format toolbar to select the color I want. Is there a macro shortcut for changing font color?
Even further, can the macro be able to change the font color of the entire row without highlighting the entire row? Meaning if I only have 1 cell selected within the row I want to color the font and apply the shortcut, can it color the font in the entire row???
I would like to address this:
If cell in column1 is filled (.Interior.ColorIndex = 15) then font color is 0 in any cell of that row.
(right now the color is red and I cannot change this at the source but will have to add a sheet change event maybe)
I use the "custom header&footer", and I want to to change the color of font, but I don't finde this choice!
View 9 Replies View RelatedI want to apply different font colors to text written in an excel comment box using VBA code (Please check the attached screenshot) I was able to apply one colour to all by using the following code, but am not able to apply different font color to each charater/bunch of characters.
Range("B7").Comment.Shape.Select True
Range("B7").Comment.Text Text:="A" & Chr(10) & "B" & Chr(10) & "C"
With Selection.Font
.ColorIndex = 9
End With