Macro That Finds, Copies And Pastes
Jun 14, 2007
I am trying to make a macro, but because of my inexperience, it's not working out. I have got a big list (list 1) of numbers in column E. each number has some information in the cells of columns C, D and L, all in the same row. on the same sheet, I have got another, smaller set of numbers (list 2), also in column E but at the bottom of the sheet. the numbers in list 2 are all present in list 1 (but not all numbers in list 1 are present in list 2). the columns C, D and L on the same row of the numbers in list 2 are empty...............
View 4 Replies
ADVERTISEMENT
Oct 23, 2012
What i am trying to do is in 1 workbook (labled as Book1 literally), it needs to copy the sheets out of every .xls file there is in a single directory, we'll call C:MyFolderMySubFolder. There can be anywhere between 1 and 366 files in this particular folder and I need all the sheets in each file labled 'CC' copy that entire sheet, paste that sheet to Book1, go back to that file it was copied from, close it (saving changes is ok), then move on to the next file.. and the next file... and so forth
While pasting into book1, I need each WS copied from each file to paste to a new worksheet in book1 rather than combining them into 1 or overwriting, and lable each of those sheets the file name of which the sheet came from...
The names are in sequence. All files in the folder will be labled as a date such as "9-6-12" so the sheet name in book1 would be named 9-6-12. (so there may result in 366 new worksheets to book1)
I primarily use Microsoft Office Excel 2003
View 5 Replies
View Related
May 4, 2006
I need a Macro that Copies all the duplicate values in a column (and their corresponding rows) over to a new spreadsheet.
For example,
1 A B C D E F G
1 Z X Y D R M T
2 B 5 7 8 9 0 4
Because 1 is a repeated value in the first column, the macro copies the first two rows over to a new spreadsheet.
View 8 Replies
View Related
Jul 9, 2013
I have an email sent via pdf and the only way to get this into excel is by copying and pasting and it all shows up in one cell.
Not much to focus on other than reading from left to right, once you see a numeric value, this should be in another cell and once you see "LS or WS or NR or COA, this will begin another cell. I had to add the dots to show where the new cell starts.
parsed data
SHELL TBN...130 CURACAO/JAPAN 18JUL... LS 3.675M PDVSA SUBS
EVERGLADES...70 CHIRIQUI GRANDE/USG14JUL... NR BP
TEXAS STAR...70 ECMEXICO/USG 11JUL... NR NR
MINERVA LIBRA...70 BAHAMAS/USG 11JUL... WS 80 STATOIL RPTD
original data
SHELL TBN 130 CURACAO/JAPAN 18JUL LS 3.675M PDVSA SUBS
EVERGLADES 70 CHIRIQUI GRANDE/USG14JUL NR BP
TEXAS STAR 70 ECMEXICO/USG 11JUL NR NR
MINERVA LIBRA 70 BAHAMAS/USG 11JUL WS 80 STATOIL RPTD
CPO ENGLAND 35 ECCANADA/OPTS 07JUL NR CREST ENERGY FLD
View 4 Replies
View Related
Nov 30, 2009
need to create a macro that inserts 3 rows below each existing row of data and simply copies and pastes that data into each of the empty rows before moving on to the next unique row and doing the same thing again.
This is what I have so far, but I can't seem to get the loop right.
Rows("2:2").Select
Do
Selection.Insert Shift:=xlDown, CopyOrigin:=xlFormatFromLeftOrAbove
Selection.Insert Shift:=xlDown, CopyOrigin:=xlFormatFromLeftOrAbove
Selection.Insert Shift:=xlDown, CopyOrigin:=xlFormatFromLeftOrAbove
activecell.Offset(-1, 0).Select
Range(activecell, activecell.Offset(0, 5)).Copy
activecell.Offset(1, 0).PasteSpecial
activecell.Offset(1, 0).PasteSpecial
activecell.Offset(1, 0).PasteSpecial
Selection.Offset(1, 0).EntireRow.Select
Loop
View 5 Replies
View Related
Apr 22, 2009
I have a macro that selects and copies and pastes a range of data from one sheet to another sheet. It works perfectly except it is pasting all the cell formatting and formulas and i only want or need the values.
View 8 Replies
View Related
Nov 6, 2009
I currently have the following code that copies a range opens notepad pastes the range opens save dialog and types the file name. The problem I have is with overwriting the existing file.
Range("A1:A202").Select
Selection.Copy
Shell "notepad.exe", vbNormalFocus
SendKeys "^V"
SendKeys "^s"
SendKeys "Total_IEDs_Hour_Of_Day_2009.xml"
SendKeys "{TAB}"
SendKeys "a"
SendKeys "{ENTER}"
Everything works fine to this point. Then it opens the do you want to overwrite dialog and I cant get it to hit yes.
View 9 Replies
View Related
Aug 16, 2014
i am looking for a Macro, that looks for a bank row and then copies the below row in to it.
For example
blank row 5
Paste data from row 6 to row 5
the sheet has 1500 lines of data with a lot of blank rows that needs pasting. I have attached a example of the file i am using.
View 3 Replies
View Related
Feb 23, 2007
What I need is a macro that can be assigned to a button. This macro would search Column B for any entry (these names are selected from a drop-down list). Any time it finds an entry, it would copy that entire row of data and paste it into the Shared worksheet in the same workbook. This macro would be run on four other sheets in the workbook and would be run at least weekly. The Shared worksheet will only be blank the first time. After that, the macro would need to paste the information in the first blank row...
View 9 Replies
View Related
Jun 26, 2007
I am working on a macro that copies tabs from the spreadsheet the macro (button) is located in, creates a new book for them, and then pastes values so that no formulas still exist. The problem I am having is with named ranges. The named ranges do not reference the new sheet, but rather the old spreadsheet. This is fine because the new file is solely for presentation, however, one macro (which selects print ranges based on user selected checkboxes) tries to reference the old spreadsheet once it runs. I would like the macro that I currently have working, to also make this macro in the NEW spreadsheet so that it can still highlight the correct print area when used. The macro does not reference the name of the workbook at any point, it is purely "Range("ai10") type references so I don't understand why it is trying to open the old sheet back up.
View 2 Replies
View Related
Jan 23, 2014
I have 5 opened files. I have copied into those files a set of formulas from my master sheet (with the macro). In A3 of ALL the open files, there is a date (ex. Date: 1/4/2014) Based on that date I want to copy the result of what I copied into the files (below is the code that I used to copy into the open files, maybe I could add something to create a named range of the resulting paste) back into the master sheet into a tab called 2014 and into a cell two cells below the cell in row 12 with the MATCHING date.
View 14 Replies
View Related
Sep 29, 2011
I need an excel macro that will copy the last row of data from one worksheet within a workbook to another worksheet in the same work book. The last row number of data will alwasy vary
View 9 Replies
View Related
Jan 20, 2014
I am looking for a Macro, which would first ask me to input the member notation in a new tab (Say M1 in the example). After I give the input as M1 or M2 or M2 or so on, it would display only rows for Section 1 (min and max values) and section 4 (min and Max values)(highlighted in Red). I know it is petty simple, but I am still an amateur with regards to Macros.
Member
Section
Axial
Shear Y
[Code].....
View 5 Replies
View Related
Sep 25, 2008
I have created a macro, which copies data from 1 sheet to another, in order to Format and rearrange the columns.
The problem I have is that if I "Insert" a column on sheet 2, I have to amend all of the ranges in the macro to reflect this.
Sample of the code
Worksheets("FTIS Data").Select
Range("e5:e" & Range("e" & Rows.Count).End(xlUp).Row).Copy
Worksheets("Quote Tracker").Select
Range("c5").Select
ActiveSheet.Paste
Worksheets("FTIS Data").Select
Range("g5:g" & Range("g" & Rows.Count).End(xlUp).Row).Copy
Worksheets("Quote Tracker").Select
Range("d5").Select
ActiveSheet.Paste
View 9 Replies
View Related
Sep 27, 2008
i created a sheet and called it "Original" (which somehow is a template), in another sheet i created a big Button named "Create account" ,then i created a macro which copies that "Original" sheet and by default it names it "Original 2 " now that i need a new account each time i click that button to create a new sheet and rename it by the client name i need, in order to keep the "Original" intact as a template. It happens sometimes by mistake that i rename the "Original" one ( The template one) which therefore returns an error when i click the button!
Is there anyway to add to that macro a code which rename that "Original 2" something else lets say "Account" to differentiate it from the Template one?
Or to Protect only the "Original" sheet from being renamed out of the whole sheets i have , in order not to rename it accidentally?
View 9 Replies
View Related
Aug 4, 2009
Trying to create a spreadsheet to track transactions. Sheet "A" is the working file with a limit of 25 rows. When a transaction is complete, I would like a macro button that copies one of these rows (1-25) to an archive file (Sheet "B"). I would like it to copy and paste to the next available row on Sheet "B".
View 9 Replies
View Related
Nov 12, 2009
I have a data sheet like so:
A B
Name Grade
Jim 82%
Bob 90%
Kelly 71%
June 95%
And I also have two cells which are designated as the low and high range. (ie C1 = 85% and C2 = 100%). I need help with the macro for the button that will copy only the rows to a new sheet that fit within the range. So in the example above, pressing the button will create this in a new sheet:
A B
Name Grade
Bob 90%
June 95%
View 2 Replies
View Related
Feb 3, 2010
I want to create a macro that will allow me to create a set number of copies of a specific sheet within the workbook. I have one sheet within my workbook entitled "Tab". I want to create a macro that will ask me how many copies I want to create and then proceed to create all the copies. i.e.: select to create 4 copies, with the result being: Tab[original], Tab(2), Tab(3), Tab(4), Tab(5)
View 2 Replies
View Related
Sep 14, 2008
I've found afew examples off google searches, but my attempts to edit them arent working...
i want a macro to copy a range, say a1:e5, and paste the values and fonts/boarders/etc (ie no formulas) into a new workbook
the ones i found copy a whole sheet, i just want a portion....
View 9 Replies
View Related
May 13, 2014
I have this code that works where Column A and B from 12 sheets are copied to a "Complete" sheet where it is saved as a CSV file for import.
I'm fairly new at this and know this code could be simplified to loop through the 12 sheets instead of copying the code 12x!!
I've copied the code for the 1st 2 sheets:
Sheets("Sheet1").Select
For i = 3 To Cells(Rows.Count, 1).End(xlUp).Row
OutSH.Cells(1, outcol).Value = Cells(i, 1).Value
OutSH.Cells(2, outcol).Value = Cells(i, 2).Value
OutSH.Cells(2, outcol + 1).Value = Cells(i, 3).Value
outcol = outcol + 1
[Code] ......
View 1 Replies
View Related
May 8, 2007
I'm looking for information on building a macro that will automate making copies of a spreadsheet into another workbook that contains very particular information. My master sheet has lists of my customers and the rep's that service them. What I need to do is have macro buttons for each rep. that will pull all the shops that they service and all information for these shops into another spreadsheet.
View 9 Replies
View Related
Oct 1, 2013
I am trying to have a macro that separates a list with unique values in column a, copy the results, open a file name in column AG, and then paste the copied stuff into the open workbook.
Currently, it runs, but when I copy to the new sheet, the thing I want goes where I want it to, but I also get an extra sheet1. how can i change this so the sheet1 doesn't get pasted in?
Sub MC()
Dim r As Long, rng As Range, ws As Worksheet
Application.DisplayAlerts = False
Application.ScreenUpdating = False
ActiveSheet.Name = "Sheet1"
With Sheets("Sheet1")
Sheets.Add().Name = "temp"
[code]....
View 1 Replies
View Related
Jan 30, 2009
the following code filters data and copies to worksheets specified in code, can this code be shortened to make the macro run faster. Also in my second criteria how can I put "Contains "PT2" in the criteria as nothing happens when i run the macro, is *PT2?
With shtRec
.AutoFilterMode = False
.Range("A7").AutoFilter Field:=8, Criteria1:="LEHMAN", Operator:=xlAnd
With .AutoFilter.Range
On Error Resume Next
Set rng = .Resize(.Rows.Count - 1).Offset(1).SpecialCells(12)
On Error GoTo 0
End With
If rng Is Nothing Then
MsgBox "No data to copy"
Else
rng.Copy shtLehman.Range("A6")
End If
.AutoFilterMode = False
End With
View 9 Replies
View Related
Apr 29, 2014
I have a macro that copies rows from my DAILY OCCURENCE sheet that have a YES in them to my MANAGER SUMMARY SHEET and G1 is selected which has a hyperlink that opens a new email with the manager's email address and Subject pre-assigned.
I then have to manually go back to the newly generated summary sheet and select the cells and paste them into the email that was just opened.
Is there a way that the generated rows are already copied in memory and all i have to do is CTRL+V into the new email, or even better, the cells are pasted in the email automatically? So basically either the information being copied over stays in memory, or after it is copied into the summary sheet it is copied again. I just dont know how to copy unpredictable ranges generated by macros.
The code that generates my summary sheet for my manager is below.
[Code] ...........
View 4 Replies
View Related
Jun 1, 2009
I need to add to a current macro which currently copies the master tab and creates a new tab with tomorrow's date on it. For reference here is the current macro:
View 3 Replies
View Related
Apr 13, 2008
Consider two instances of Excel - one with a workbook containing a chart and some VBA code, the other containing a blank workbook. When I paste a chart from the first instance of Excel to the other, all the VBA code from the original workbook is also pasted into a new third hidden workbook in the second instance of Excel! If that weren't weird enough ON WINDOWS XP (but not Windows 2000) if the VBA code included WorkbookOpen or AutoOpen this code is executed in the second instance of Excel, which of course fails if it references sheets that only existed in the workbook open in the first instance of Excel! This is the first time I've seen the same version of Excel do different things on different versions of Windows! Example attached - What's going on!? Auto Merged Post Until 24 Hrs Passes;...note: this does not happen when pasting charts between workbooks open in the SAME instance of Excel
View 6 Replies
View Related
Apr 21, 2014
I can assign a number of copies to print by adjusting ActiveWindow.SelectedSheets.PrintOut Copies:= , but what I want it to have the number of copies auto adjust to the value of a cell that contains a formula. I was hoping it would something as simple as Copies:=cell but no luck...
View 2 Replies
View Related
Mar 6, 2013
I have written a macro that prompts the user to chose some files and if they meet certain criteria, it copies them to a specified folder.However, I have run into this 424 error "Object required".
Code:
Sub FILES2SFTP()
Dim FileNames As Variant
Dim I As Integer
Dim fso As Variant
Dim Data As String
ChDrive "G:"
ChDir "G:TEST"
[code]....
The error is in this line:
If fso.getfilename(FileNames(I).Name) = ("Name1" & Data & ".xls" Or "Name2" & Data & ".xls") Then
View 2 Replies
View Related
Apr 28, 2007
The problem: I am getting values when doing a pastespecial for formulas and formats.
Manually copying and doing a pastespecial with the mouse gives me the correct results. Below is code I got from the forum, "here", and am running in a test workbook.
Option Explicit
Sub Test2()
'
Dim rSource As Excel. Range
Dim rDestination As Excel.Range
Set rSource = ActiveSheet.Range("A1:C1")
Set rDestination = ActiveSheet.Range("A1").End(xlDown).Offset(1, 0)
rSource.Copy
rDestination.Select
Selection.PasteSpecial Paste:=xlPasteFormats, _
Operation:=xlNone, _
SkipBlanks:=False, _
Transpose:=False
Selection.PasteSpecial Paste:=xlPasteFormulas, _
Operation:=xlNone, _
SkipBlanks:=False, _
Transpose:=False
Range("A1").Select
Application.CutCopyMode = False
valKill:
Set rSource = Nothing
Set rDestination = Nothing
Exit Sub
End Sub
Does anyone know why I am getting values? What do I need to do to make this paste only the formats and formulas?
View 9 Replies
View Related
May 30, 2014
I'm trying to paste data from a website. It's in the format:
abcd abc abcd abc
abc abcdef abc abc
The data is separated by SPACES. There is a different number of spaces between the data on each line (not sure if that matters)
When I paste it into excel, each line comes through as one cell. Is there a way to tell excel to recognize the spaces as new cells?
Figured it out. Data --> Text to columns
View 3 Replies
View Related
