I want to use " sheet name" as Vaiable keeping format the same. For Example in the following example :if I type Sheet2 in cell A1 I should be able to change this range " sum(Sheet1!b3:b5" to "Sheet2!b3:b5"
View 2 Replies
I am trying to create a macro so that when i save an entry the form sheet looks in the tavela master sheet to see if there is a match on the record number (in the A column) and saves there as an update if it matches and then if there is no match, saves it in the last empty row. this is a column to row copy so it has to be paste special to transpose. also i have a password on the sheet which i use to unprotect then reprotect. i have successfully done these two things separately but cannot combine them! i know not very much about visual basic code just what i have read here and so i am trying to make this code work.
Code:....
I need to get to the last sheet in the workbook through a VBScript macro.
View 5 Replies View RelatedI am currently trying to use a variable instead of an absolute name for sheets name in VLOOKUP, but it wont work:
Original formula:
=VLOOKUP($D6,ABG!$B$9:$O$12,3,FALSE)
What I would like:
=VLOOKUP($D6,$A$6!$B$9:$O$12,3,FALSE)
with A6 = ABG
I'd like to compare values from different sheets. My sheets contain data from different years. I have sheets named 2000, 2001, 2002, 2003.... I also have a sheet named "compare". Now I'm using functions like: =('2008'!J13/'2007'!J13)-1
which gives me the relative change between years 2007 - 2008 in the cell J13.
I'd like to use the sheet name as variable. For example: "year 1" is given in cell A1 and "year 2" given in cell A2. Then I could enter (for example) 2007 in cell A1 and 2008 in cell A2. How can I use these cell values in the function? I’ve tried something like: =('A2'!J13/'A1'!J13)-1. I assumed that 'A2'!J13 would be the same as '2008'!J13. It didn’t take me long to figure out that doesn’t work. What would be the right way to do this?
I am trying to use a variable for the name in the Sheets command so that I can put in the names of the CSV file that I have captured in a variable. Here is the macro that I recorded using Excel 2007:
View 4 Replies View RelatedI have an Active sheet which is
MySName = ActiveSheet.Name
Here MySName gives the active sheet name.
I require 1 more variable to take this MySName and assign it to a workbook name and make it is as .xls as i required this workbook name to be used later to close the workbook
For ex:
MySName = ActiveSheet.Name
this gives MySName =aaaa
Now i want like MyWBook = aaaa.xls
But aaaa i want it from variable as we cannot hardcode it.
I have a workbook with a list of staff in it. The format is: the manager's name is in row 1, the 8 or so team members are listed below. And again in row 20, there is a manager's name with 8 or so team members listed below. This is duplicated over many columns and multiple sheets. The sheets are all named after the ops-managers who manage all the managers on their respective sheet. The book is called "stf.xls"
I'm using the following code to look up a staff member and return who their manager and ops-manager is to the relevant cells in a different workbook:
Code:
Sub AdvisorFind()
Dim Wsht As Worksheet
Dim Slookfor As String
[Code]....
My problem is how to return the manager's name for a staff member in the middle of the book. Activesheet. is the last worksheet so no good. Wsht.name.Range(manager) is what I want to do but I don't know the correct syntax.
How do I set a variable to the active sheet name in VB.
Hypothetical example here:
Dim Sht as Name
Sht = Activesheet.Name
Running Windows CP; Excel 2003
The Board looks full of some interesting issues today.
I'm working on a workbook that hides and unhides a lot of columns depending on the month the user has selected. No problems here.
The sheets are named regionally, ie National 2008, California 2008 etc. The user is able to select the month and the year from separate combo boxes.
So when 2009 comes around I will need to rewrite many lines of code to point the VBA to the new worksheet names like National 2009, California 2009. My question is, is there a way to reference either variable worksheet names in the VBA or some other manner in which to write the code so I don't need to rewrite every year change?
I currently reference the sheets something like Sheets ("National 2008").Range("H:H").EntireColumn.Hidden=True
I have a workbook with a lot of sheets. The names of these sheets are numbers ranging from 000001 to 999999, and are listed in column A in the Sheet TOTAL. Moreover these numbers (and the appropriate sheets) built 9 groups out of which every group has its own individual Tab color, also used in the A column of the TOTAL Sheet to differentiate between these groups. Now I want the following code to get data from each of the sheet belonging to a certain group and paste it to one of the 9 extra sheets (SH1, SH2, SH3... SH9) basing on the color of the sheet. The specified rng range is in the Sheet TOTAL (the names of all of the sheets are stored there).
Sub allinone()
Dim rng, c As Range
Set rng = Range([a2], [a2].End(xlDown))
For Each c In rng
If c.Interior.ColorIndex = 4 And c > 0 Then
Worksheets(c.Value).Range("a2:db2").Copy
Worksheets("SH1").Range("A65535").End(xlUp).Offset(1, 0).PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _...................
I need a command to copy an entire sheet into some variable, in order to paste that variable in the same sheet later, if necessary (classical undo functionality).
Something like:
Private Sub CopySheet()
w = Worksheets("test")
...
...
Worksheets("test") = w 'UNDO if necessary
End Sub
Im have a vlookup which is specifying a table array from another tab on my workbook i.e. =VLOOKUP(J21,'Norwich CR'!$B:$AZ,6,FALSE)
I have another lookup which is feeding back the names of each worksheet (in this example its "Norwich CR". The range will be the same always $B:$AZ but i want the formula above to vary depending on whether my other look up feeds back "Norwich CR" or "Ipswich CR". how i can get =VLOOKUP(J21,'Ipswich CR'!$B:$AZ,6,FALSE) instead just by reading from another column of lookup data????
I have a formula that pulls data from another sheet using standard reference of sheetname! I want to build this forumla to use several sheets, and would like to pull the sheet names from other cells.
For example... instead of LEMONS!a1 and LIMES!B2
I would like to use REF1!a1 and REF2!B2
where REF1 and REF2 are pulled from cell Z1 which contains test 'Lemons' and cell Z2 which contains text 'Limes'
How can I do this?
I just started venturing into VBA. I'm trying to pull the data from a different workbook that will have the previous month as the sheet's name. I can't get the dynamic part of the code.
[Code] .....
In the first sheet "Sheet1", I am trying to SUM the values of column C from another sheet 'XXX'. The trick is that the name of this other sheet is a variable, like Sheets(1+i).name , "i" being an integer. I can't find the proper syntax for the formula below.
PHP Code:Â
ActiveCell.FormulaR1C1Â =Â "=SUM(XXX!C[1])"Â
Is it possible to store format of a sheet in a variable?
I have one sheet. i want to select all cell. then copy the formatting of this sheet(template) in a variable. is that possible? does variable need to be a clipboard? if it is in clipboard how to reference it? i.e if i have two or three formats stored in a clipboard how to select and paste the second one?
once i store this in a variable, i will paste in new sheets(about 50 of them) so that all these new sheets have same format as the template.
what is the easiest to do that?
I am attempting to use the code below to activate a sheet whose name is contained in a variable. The line in Bold gives me a "Subscript out of range" error even though the variables seam correct in the debugger.
Code:
Private Sub GetFromArchive_Click()
Dim wkb As Workbook
Dim strPath As String: strPath = "M:EfpDocsArchivesESI Processing Log Master Archive.xls"
Dim lngListItem As Long, lngSelected As Long
Dim varSheets() As String
[Code] .......
How should this read? So SheetName is the variable in the range funtion?
Dim SheetName As String
SheetName = ActiveSheet.Name
Set AllCells = Range('" & SheetName & "'!B7:'" & SheetName & "'!B60000")
I have a workbook that is composed of forty (or so) worksheets containing data and a single summary worksheet that has command buttons that take the user to the appropriate data worksheet for their specific project. Each data worksheet is exactly the same in terms of where the header row starts, and the specific headings.
On each data worksheet there is a command button that when clicked, builds a pivot table of the data for the current project. I have been able to create VBA code that hides the columns containing the data and then creates the pivot table in the empty (unhidden) columns n the same worksheet. This works fine, but is not a good solution from a useability standpoint.
What I have been trying to do is when the command button is clicked I want to capture the name of the current worksheet as a variable in VBA, go to a separate worksheet to build the pivot table, and when the user clicks a ‘Review Data’ command button on the pivot table worksheet they are taken back to their original worksheet containing their data. Is this possible?
Could someone show me an alternate way of using/writing this code instead of using RC references to the Sheet1. I am trying to select ranges that dynamically change according to the range of data in the next column. This is the code I have but it is static in the range it chooses.
=LINEST(Sheet1!RC[1]:R[61]C[1],Sheet1!RC:R[61]C^{1,2,3,4,5,6})
I have a control sheet that needs to fetch numbers from a different worksheets depending on the worksheet name that I type into a cell. So if I type "sheet1" into cell A1 then I want the formulas on the sheet to automatically change fetch the data from sheet1. Then if I type in "sheet2" for example, the formula must then look at sheet2 for example. The source sheets are all identical in layout so not bothered about the actual cell ranges. I can do this in VBA but would like to keep this simple in Excel formulas.
View 2 Replies View RelatedNot sure what i'm doing wrong but I have this bit of code to get an average of a set of data. then i'm planning to paste that avearage into another sheet. however I cant seem to get the variable to work. without the variable it works:
View 3 Replies View RelatedI have a set of worksheets (Sheet31 through Sheet49 by codename) produced by a machine in the lab. I want to create a summary sheet that references cells in those worksheets.
Rather than go through the annoyance of doing this manually 40+ times I'm working on creating a macro to populate the summary sheet for me.
This is what I have so far
For J = 31 To 49
ResultSht = SheetJ.Name
Sheet1.Activate
ActiveSheet.Range("A4").End(xlDown).Offset(1, 0).Select
It hangs up on the "SheetJ.Name" however. My objective is to be using the object SheetJ, where the object SheetJ is the codename of the results sheet I'm trying to reference (for example, in the first pass through the loop it would be Sheet31). Could someone point out my mistake in this object reference?
I am trying to limit the amount of stuff I write to a sheet, and I figured I can just pass variables around inside of a routine with out having to write each step to a sheet like I am doing now.
Below is the formula showing Z2 as where parsed data is
CVersionFormula = Evaluate("Z2 * 10 ^ (4 - Int(Log(Z2)))")
and here it is, with me trying to plug in a variable rather than read it from the data sheet. The variables for ease are read from the data sheet. In this example I would read in Z1 and assign it "CVersion", then the formula then takes CVersion (a 4 digit number) and makes it a 5 digit number..
CurrVersionE = Evaluate("CVersion * 10 ^ (4 - Int(Log(CVersion)))")
But I don't think I have the variables in there right.
I need to allow users to add up to seven new worksheets as required and the new sheets must be named Image1, Image2, etc. I do not want to add seven worksheets at once, only one at a time as the need arises and no new ws can be allowed after Image7 ws is added.
I have a macro to test for the existence of ws Image1, but need help on further development to add and test for the extence of the remaining sheets.
Dim ws As Worksheet
Dim bTest As Boolean
For Each ws In Worksheets
If ws.Name = "Image1" Then
bTest = True
Exit For
End If
Next ws
If bTest = True Then
'Need some code here, not sure what I need
I have a workbook with multiple sheets. There is an overview sheet and then 14 sheets allowing for 14 days worth of schedule information. There are then 3 sheets following the 14 days to total some information. The workbook users frequently change the sheet names of the 14 sheets to reflect days of the week.
I'm creating a copy for distribution that takes the active workbook and copies the values to a new workbook. There are columns that I would like to delete from the 14 day sheets and that would be easy enough if the sheet names were never changed.
The code I'm using currently follows (my thanks to Turtle 44 for helping on that section)
Sub Copy_Visible_Sheets()
Dim arr() As String
Dim i As Integer
Dim WB As Workbook
Dim WS As Worksheet
Set WB = ActiveWorkbook
Application. ScreenUpdating = False
'Make sure template is saved as .xls
If Not ThisWorkbook.Saved Then
MsgBox "Please save this workbook before generating a Client Copy."
Else
I have a front sheet with a list of all the sheets in the workbook in column A.
In column B I need to use the counta function to count the number of entries in the corresponding sheet to column A.
As there are 70 sheets I'd thought I'd use a Macro but I'm having great difficulties. I've done a search but can't find what I'm looking for.
So heres part of my code (it uses loops etc which I've managed but this just errors)
cell.Offset(0, 1).FormulaR1C1 = "=counta(" & str2&" C[-1])-1"
The str2 is the string name to reference the sheet in the formula (for example sheet1), I can't figure out how to enter this into the code so it works and is accepted.
I'm trying to figure out a way to lookup a value based on a conditional sheet name. I'm finding it difficult to explain in words what I'm trying to do, so I'm going to try and describe it in a miniature example of my spreadsheet. I apologize if this is going against forum rules, this seems like the quickest way to get my question across:
The following is the way my spreadsheet's first page is set up:
ID Apr-08 Mar-08 Feb-08
1
2
3
The column labels depend on another table, which changes monthly.
The rest of the sheets (24 of them, labled "200804", "200803", etc) look like this:
ID $ amount Date paid
1
2
3
I have another table upon which the na
I'm trying to return the "Date Paid" value for each ID for each month. Each month, however, more data arrives, and the labels change. I have several dozen spreadsheets formatted in this way, and I'm trying to avoid having to change the vlookup (or other formula) manually each month for each sheet. Is there a way to make the vlookup depend on a table?
This is essentially what my formula looks like right now for cell A2:
=VLOOKUP($A2,'200804'!$A$1:$G$10000, 3, FALSE)
If I could replace '200804' with a cell reference, that would be ideal. I haven't been able to figure out how (if possible); I tried experimenting with index sheets but that went nowhere.
I would like to run a calculation based on selected active range in sheet. I tried several methods and cannot make it work.
View 2 Replies View Related
