Stop The Moving Sheets
Jun 21, 2006
I have a macro that will open all the workbooks in a specified folder, regardless of the actual number of workbooks...All worked fine, until I tried to move a particular worksheet, from each wbk, into another specified wbk....The files open correctly, and copy / move the sheets correctly to the assigned wbk...but...it won't stop inserting sheets..it starts over and continues the process....?????
Option Explicit
Sub rbaOpenAll()
Dim x As Integer
Dim WB As String
Dim wbk As Workbook
For x = 1 To 100
WB = "G:ClaimsXtenTESTRBARBA " & x & ".xls"
On Error Resume Next
Set wbk = Workbooks.Open(Filename:=WB)
Worksheets("Current Rules - 1").Activate..............
View 5 Replies
ADVERTISEMENT
Apr 3, 2009
I have attached a sheet that I'm having an issue with. Columns D and E on the Dim Calculator sheet have a data validation formula in the cell. It works in the sense that it pops up if they are outside the parameters that I want them to hit. However, if the user clicks the Cancel button they can just keep going on even though the entry in the cell is aganist the validation.
Example: Columns D and E cannot be larger than Column C. Currently now if Columns D or E are larger than Column C the validation error pops up. But I can just click on cancel and keep going. That is what I want to prevent.
Is there a way to grey out the cancel button?
Should I do something else within the validation itself?
View 3 Replies
View Related
Feb 26, 2009
I use a Workbook with several Sheets. I want to be able to quickly move to the same cell (whatever cell is currently in use) up and down the Sheets. Ideally I would also like the chosen cell to be centered on the page as well!!
View 2 Replies
View Related
May 22, 2008
I have a dropdown list with names of different people: Bob, Jane, Joe, et cetera. I also have tabs at the bottom (sheets) for each of these people. Is it possible that when a name is selected from the dropdown box in column D, say Bob, the whole row (row 10 or whatever) is cut from main sheet and put into Bob's sheet, then the row is deleted from main sheet? If this doesn't make sense (because I stink at making sense), just let me know and I will try to clarify
View 14 Replies
View Related
Apr 9, 2009
I have one very large piece of data located in one worksheet that I use across ten other worksheets. I simply copy and paste this data into each worksheet each morning after the data has been refreshed. Is there any way to be able to simply have my master sheet update and then get coppied to all of my other sheets?
View 9 Replies
View Related
Jul 20, 2013
I am working on a macro which transfers data from one sheet to another. The code starts by taking cells M1:P1 from sheet SL_Background and moving them to B9:E9 on sheet CreateSL. It then moves to the next set of four cells on SL_Background (Q1:T1) onto the next line down on sheet CreateSL (B10:E10). I am repeating this process about 180 times right now and it is all coded like this:
VB:
Sheets("SL_Background").Select
Range("M1:P1").Select
Application.CutCopyMode = False
[Code]....
So what I would like to do is to make something that automates this process and will eliminate more than 1000 lines of code.
View 9 Replies
View Related
Jun 11, 2007
Remember Lotus used to do this?
I have on one sheet - 600 rows of financial products by 100 regions worth of $ balances and on another identically formatted sheet the associated interest rates.
I just want to page down on the $balances tab and have interest rates tab move in sync - letting me eyeball the related info.
I've tried searching for an hour to come up with the right terms - split, freeze, etc.
View 9 Replies
View Related
Nov 13, 2009
Stop sheets switching. I have a simple autofill macro
View 4 Replies
View Related
Oct 29, 2009
Can someone help me i have a few columns of information i need to move over to a another sheet, but the problem is the information i need to move is the end result of a formula and when i move it the answers are gone how do i fix this,,,,, and both sheets are on the same work book as well
is there a vlookup formula to use,,,im not experienced in Vlookup up formulas
View 9 Replies
View Related
Feb 15, 2014
My code below is supposed to move filtered rows in 2 sheets ("BANK ENTRIES" and "GL ENTRIES")with "Y"/"y" character on column J which is manually encoded by user. The rule is, before they can move, the total amount in column I in both sheets should match. That is the reason why rows in both sheets should be moved at the same time. I was able to figure out this rule with the use of an If Statement and a message box.
My problem is, if I run the code where there is only 1 row remaining in both sheets, "BANK ENTRIES" would insert a blank row in the third line despite my if statement
[Code] .....
The second problem is, If I run the code on "BANK ENTRIES", my first header on the "GL ENTRIES" will be deleted. If I run also the code on "GL ENTRIES", my first header on "BANK ENTRIES" sheet will be deleted. There must be something wrong on my code. I am attaching my working file for you to have a clear visibility on my problem.
Attached File : xx_xxxx_xxx_Template2_2013-11-30v3.xlsm
View 1 Replies
View Related
Jan 13, 2009
Could some one amend the VBA below to allow a continous loop on moving to the previous sheet within a workbook. Currently when I move to the first sheet if I use the shortcut key I get a debug error.
View 6 Replies
View Related
Sep 12, 2007
Is there a way (via Menues and or VBA) to cancel the pop-up of the Alert Window when the user deletes a sheet(s) ?
(I mean sheets that contain Data)
View 9 Replies
View Related
May 15, 2014
I know that the shortcut for moving the cursor to cell A1 of an active sheet within a workbook is Ctrl + Home. However, I thought there was a shortcut (using just keystrokes) to do this for all the sheets within the workbook. Is there such a shortcut?
View 1 Replies
View Related
Aug 31, 2007
I need to stop users from adding and deleting sheets in a workbook
My idea was obviously to disable the command bars to add or delete sheets in open event and then put back in before close.
But then i thought...whats stopping them from right clicking the sheet tab and inserting a sheet, can i remove that menu to...?
I also wasnt sure if there were short cut keys to add or delete sheets.?
Some of my users use excel alot so i want to account for an tips they know that i might not.
View 9 Replies
View Related
Sep 23, 2013
I have an excel work book with 6 tabs. I would like to have Excel move an entire row from one tab to another tab (removing the row and inserting it in the other tab). I.e. Example I have a tab with items that are marked as "Open Actions" so if I were to change the drop down to close. Excel would move that entire row of actions to the tab with the "closed actions" and insert into the next available row. Now if someone were to come back at a later date say no it should be reopened than I would change the drop down to open and excel would move that row back to the open actions tab into next available row. I tried a PIVOT table and no good I played with few macro and not.
View 5 Replies
View Related
Dec 13, 2006
my excel sheet runs through a lot of calculations, opens Flowmaster, a simulations program, passes on data, receivs data and so on. Is there any way to have a user input to stop the whole simulation. During the first tries I had a lot of break point in my debugger. But now I want to have a button to hit or better just some keys to hit to stop it without using the ctrl+alt+del which closes everything.
View 4 Replies
View Related
Sep 9, 2007
Moving between different sheets changes the procedure window, which is a good thing, but can also can be error prone and annoying to search through several windows searching for the procedure or module currently working on. Is there a setting somewhere to prevent VBE from changing the current procedure window?
View 4 Replies
View Related
Jul 9, 2014
Let's say there's a couple row:
[Code].....
Here's a column I will be pasting:
[Code] ....
If I want to "Insert Copied Cells" in place of Yellow on Row1 and shift the cells down, the rows would look like this:
[Code] .....
How can I make it so the rows would be the following during such a paste:
[Code] .....
This is because I have hundreds of cells that I need to insert as columns all the while pushing complete rows down. If you're trying to understand why, it will be for some online marketing purpose as demonstrated here in this sheet: [URL] ...
View 7 Replies
View Related
Feb 9, 2006
I am unaware how to set up a combo box to allow users to move from the combobox to the next combo box . tab or enter? The way we do it know is we click with the mouse from combobox.
View 3 Replies
View Related
Mar 5, 2007
I have a workbook with 2 work sheets, when a row has "yes" typed into the "accepted bid" column I would like that row to be placed into the second sheet in the order in which it was entered "yes"
so, if on the first sheet a row, lets say row 10 had "yes" typed into it but row 10-15 on the second sheet had something in it already, the info would have to be placed in the next available row.
I have approximatley 20 rows on the first sheet and the ones that transfer to the second can just be added to it as needed.
View 14 Replies
View Related
Mar 24, 2014
I want to move the vales from F8 to F9, F9 to F10, F10 to F12 (there is a space)and so one. I would like it to be triggered by changing the value in F8 if possible. I have tried a good few ways, sometimes I get a stack 28 error.Zones.xlsm
View 6 Replies
View Related
Apr 30, 2009
Is there a way to write VBA code that can reference a range of data that may be moved on the spreadsheet by the User? For example, if I write VBA code to reference a range of data such as:
View 2 Replies
View Related
Jul 15, 2009
I need to know the function to move a named sheet to the end of the list so its the last sheet in the workbook. Worksheets("xxxx").Copy After:=Worksheets(?)
Im copying a worksheet and want to move the new sheet to the end but I dont know how to finnish it. I tried to do.
name3 = Worksheet.count + 2
Worksheets("xxxx").Copy After:=Worksheets(name3)
but I get an error and cant debug it.
View 2 Replies
View Related
Oct 7, 2013
I am very new to macros I have a list of data all in column D. I need the macro to go through that whole column and for any cell with more than 50 characters stop at 50 and continue the remaining text in the cell below. This can all happen in column E.
View 8 Replies
View Related
Dec 8, 2006
this User Defined Function (UDF) would operate on any specified data (ignoring blanks) over a range. Inputs to the UDF are range and period.
View 9 Replies
View Related
May 23, 2007
I have a matrix A with 12 rows and 10 columns. My problem is if in the cell(i,j) there is data then the same data should appear in a similar matrix B, but in a cell which is 15 cells behind the cell(i,j).
That is it should start counting upwards from cell (i,j) in B and once it reaches the top of the matrix it should continue counting from the bottom of the immediate left column and go up. When it reaches the 15 cell from cell(i,j) in b, it should print there the value that was in cell(i,j) of A.
View 9 Replies
View Related
Jun 21, 2007
I have created a simple button that I want to take me to a certain number of tabs.
I have about 24 tabs. I can't see them all. I create a button that will take me to a specific tab from my main page. This works fine till I rename the tab. I want the code to read a sheet number or something like that instead of the specific name.
Sheets("JobList").Select
Range("A8").Select
This works till i change the name "JobList"
View 6 Replies
View Related
Oct 10, 2007
I have code broken out between two different modules due to size limitations in a single module. I'm not able to figure out how to move to the second module after running the first module. I've tried something like this:
Sub FirstModule()
'Code
'Code
'Code
SecondModule
End Sub
Sub SecondModule()
'Code
'Code
'Code
End Sub
I'm getting an error that says "Compile error: Expected variable or procedure, not module". I understand that it's not allowing me to use the name of a module as a procedure, but I can't find any information on how to call the second module.
View 9 Replies
View Related
Mar 4, 2008
i have a spreadsheet model that i have inherited that needs some rigour. currently, users are inputting the bare minimum and then running away with calculation errors all over the page. I want to be able to "force" them to fill in certain fields before allowing them to move on. Eventually, I will do this via a User Form but until then, I need something to help my lovely users along in the right direction.
So, if a user inputs a project name (say G15), they will have to also enter Project Type (I15) and Start Date (K15).
while I am here, I want to be able to have the Project Status show as Potential if the Start Date is in the future. I already have validation set to limit the user choices to "Current,Completed,Suspended,Potential,Cancelled". I am not sure how to get the validation list to be contingent on the start date.
and lastly, does anybody have a little piece of code that will make the Start Date show as the day that the Project Status was changed to Current? So, even if the Start Date was initially a few weeks away, if Status is changed to Current tomorrow, the Start Date should be overwritten with tomorrows date.
View 9 Replies
View Related
Aug 24, 2009
I'm working with duplicate rows of data and need some help to put them onto one line. I'm working with about 58,000 rows of data.
I have the following as an example:
Ref Name Address 1 Address 2
AAB01 Dr Jones 16 Marsh Ave CL4 2JH
AAB02 Dr Peterson 18 Marsh Ave CL4 2JH
AAB01 Dr Jones 21 Marsh Ave CL4 2JH
AAB01 Dr Jones 18 Marsh Ave CL4 2JK
AAB01 is the duplicate, however it's not clear which address and postcode is correct. I want to perform some sort of formula that will add to the first instance of ABB01 the details from the duplicates.
For Example:
Ref Name Address 1 Address 2 Address 1 Address 2 Address 1
AAB01 Dr Jones 16 Marsh Ave CL4 2JH 21 Marsh Ave CL4 2JH 18 Marsh Ave
View 9 Replies
View Related