This loop is to find if there is the string "Need Parent " in the range. If so the Msgbox notifies the user.
After it finds the string, the loop needs to exit- I tried to assign a counter to the MsgBox, but no go....
For i = 6 To lLrw
If Range("D" & i).Value = "Need Parent" Then
MsgBox "Stop. Parent Records Still Need To Be Created."
End If
ii = MsgBox + 1
If MsgBox > 0 Then Exit For
End If
Next i
How do you assign a loop counter value to a range row value? Scenario: Add cells from a column that aren’t successive. SUM C10 + C17 + C24 etc
Private Sub CommandButton1_Click()
Dim total As Integer
Dim counter As Integer
For counter = 10 To 700 Step 7
total = total + Range("Ccounter")
Next counter
End Sub
How can I write a For-Next Loop and have the counter skip values in between. For example:
For i = 8 to 17
When that is completed, the counter jumps to 21:
For i = 21 to 30
When that is completed, the counter jumps to 34:
For i = 34 to 43
following code works with the remarked lines out. I want to do is is if
Range ("H5") <+ 0. then put up a message box and when user clicks on the OK in message box, to exit Excel and not save the workbook. Otherwise run the code as is.
I do this stuff for free as part of a retired businessman's organization. Keeps me young, but Excel is so powerful it is difficult to grasp at times.
Before executing my code I want to check down a column to make sure there are no entries in it. If there are then I want to display a message and then exit the sub. If all the cells in the range are empty then the code is to be executed.
What I have so far is
I've worked on a solution for this thread (http://www.excelforum.com/excel-prog...-automate.html) but have been mentally challenged with how to avoid changing the loop counter in one of the loops I have used to resort an array of file names from the getopenfile dialog.
The aim of the shown code (see post 12 of the above link for attached file) is to check if the file containing the macro is included in the array returned by getopenfile while sorting the array of file names, and if so, moving it to the end of the array for "deletion" by redimming the array to exclude the last item. This problem of the open file being selected in the dialog may never arise, but... as the OP's request in the other thread was to allow two-way comparisons between numerous files, I've considered it likely enough to test for.
Here's the code I have settled for esp between the commented lines of hash symbols, which does change the counter (see the commented exclamation marks), but prevents an infinite loop (on my second try!) by using a second boolean flag of "HasCounterBeenChanged". Is there a better way of doing this? Or, alternatively (not in my thread title), is it possible to prevent the active file being selected through one of the arguments in the getopenfilename method?
My code is meant to ensure a string in a cell begins with three letters and ends with 5 numbers. It seems to work, but how can I exit the loop and go to the message box once the boolean variable is set to true? I was hoping to avoid using labels. Also, I would appreciate any suggestions in compacting the code if possible, but without using CreateObjects".
Private Sub Worksheet_Change(ByVal Target As Range)
If Intersect(Target, Range("h17")) Is Nothing Then Exit Sub
Dim Ls As String
Dim i As Integer, z As Integer
Dim MyString As String
Dim MyClVal As String: MyClVal = Target.Value
Dim MyBL As Boolean: MyBL = False
I have a For Each...Next loop to read and write data from one workbook to another. Now, it's possible but unlikely that a certain "wellindex" (as defined by the Column A value) occurs more than once in the source spreadsheet, and only the most recent value should be used. And now to the actual question. Currently my macro runs a check to see if the current cell's wellindex has already been used, and if so, then it warns the user of potential double-entry. What I'd like to have it do is have it check whether the current cell's wellindex has duplicates further down (e.g., using a "findnext" method), and if so, then skip to the next cell in the For...next loop. I know that I can exit a loop with "Exit For" but I don't know how to have it go straight to "Next c" without embedding everything in an If statement.
Sub DataImport()
'Define variables
Dim sourcedata, sourcename, originname, sourcedate As String 'filename variables
Dim wellindex, ch4, co2, o2, bal, adj, com As String 'data variables
Dim cor, owp, owp2 As String, overwrite As Integer 'prompting variables
overwrite = 0
'Set up the data source
originname = ActiveWorkbook.Name
sourcedata = Application. GetOpenFilename("Data Output Files (*.csv), *.csv", , "Open the source file").........................
I have a table named INPUT and a unique list named MODELLIST. I am doing a find function for each model from the modellist to the table input. I am using a autofilter to sort data and find to collect column data. Some models from the modellist may not be present in the table input. how do I check first if there is any data and exit loop if true. The following is part of the code that I am using and the error that is displayed is NEXT without FOR
Dim rFoundIt As Range
Dim iLoop As Integer
For Each model In Worksheets("sheet2").Range("modellist")
Worksheets("input").Activate
Selection.AutoFilter Field:=3, Criteria1:=model
With Sheets("input").Range("input")
Set rFoundIt = .Cells(1, 1)
For iLoop = 1 To WorksheetFunction. CountIf _
(Sheets("input").Range("input"), model)...............
So say you have a loop running a large number (on the order of 1 to 10 billion loops) and you want to exit after some amount of time x, what is the most efficient way to do this?
doing something like:
Code:
stTime=timer
do while timer-stTime < x
*do stuff*
loop
is slow...
i also could approximate the time per loop and only check when the counter passes that general area...but i dont want to use a counter either
I would like to call upon a function until a certain criterion is fullfilled. Then, I would like to have the result returned to me and exit (all) open functions. For value1 = 1 and value2 = 10 I expect value1*value2 = 100. Instead, the routine returnz zero. What is the logical flaw in the code below.
Function testfunction(value1, value2)
If value1 = value2 Then
'Calculating the difference
testfunction = value1 * value2
Exit Function
ElseIf value1 < value2 Then
value1 = value1 + 1
Call testfunction(matrix1, matrix2)
End If
End Function
I am trying to build a macro that will search a column for the word "TEST" and when it finds that word it needs to prompt the user with a YesNo message box (or something similar) if they would like to delete the entire row that contains TEST. If Yes is selected, it should delete the row and continue on to find the next TEST in the column and repeat this process. If the user selects No, it should continue on to find the next TEST in the column and repeat this process.
View 4 Replies View Related am looking for a code that uses for loops of any other type of loops to create an array shown below:
1 2 6
6 5 1
2 3 7
7 6 2
3 4 8
8 7 3
5 6 10
10 9 5
6 7 11
11 10 6
7 8 12
12 11 7
The array above represents the node number of the triangles within a rectangle as shown in the image. [URL] .....
I want to use the macro to run an XML file but I would like the images to run from 001 to what ever say 300 is this possible? So rather that 1,2,3 the counter would be 001, 002, 003 etc.
View 3 Replies View RelatedI would like to put a counter (number) in my excel sheet. Consider that like a bill number. Any time I open my Excel I want to have new number on top. For example 201, 202 so on and so forth. I would appreciate if anyone had this project before and willing share it with me.
View 9 Replies View RelatedI am using excel with system called PI, where i can retrive datas from network
I have proble with calculating day (With sum) becoz date is virying daily and data changes accordingly
Example
22-Mar-07 23:40:101
23-Mar-07 23:40:101
24-Mar-07 23:40:101
25-Mar-07 23:40:101
26-Mar-07 23:40:101
27-Mar-07 23:40:101
28-Mar-07 23:40:101
29-Mar-07 23:40:101
30-Mar-07 23:40:101
31-Mar-07 23:40:101
01-Apr-07 23:40:101
02-Apr-07 23:40:100
03-Apr-07 23:40:100
04-Apr-07 23:40:100
05-Apr-07 23:40:100
06-Apr-07 23:40:100
07-Apr-07 23:40:100
08-Apr-07 23:40:100
09-Apr-07 23:40:101
10-Apr-07 23:40:101
11-Apr-07 23:40:101
For this example Now i want to start counting from 9th April.
Sure i dont want to calculate from 22 march to 1st april
Sure this wont be same every time, becoz after 10-15 days this figure will become zero and stays for 0 for 10-12 days and again become 1 and keep continue
So every day automatically 1 day go out from top and 1 day will add on bottom with either 0 or 1 (But if zero it will continue for few days or 1 than also case is same)
So i like to start counting from where it changes from 0 to 1 again
Hope i explained question properly
Reset Counter to Zero:
I have Record ID on Column A: Auto Increment
I have a vendor Name on Column B: Vendor 1, Vendor 2, Vendor 3
I have a Code on Column C, Code A, Code B
What I want to happen is the Counter to count +1 each time. it sees the same vendor, same code and only to count to 4. As soon as it counts to 4; the next counter should be 0 (Zero).
Col A Col B Col C Col D
======= ====== ===== =======
Record ID Vendor Code Counter
======= ====== ===== =======
1 Vendor 1 Code A 1
2 Vendor 1 Code A 2
3 Vendor 1 Code A 3
4 Vendor 2 Code B 1
5 Vendor 1 Code A 4
6 Vendor 1 Code A 0
8 Vendor 2 Code B 2
9 Vendor 2 Code B 3
10 Vendor 1 Code B 4
12 Vendor 1 Code A 1
13 Vendor 1 Code A 2
14 Vendor 1 Code A 3
15 Vendor 2 Code B 0
It can be either in VBA or formula...
we have a spreadsheet which we encourage our employees to use but not sure if they are or not. is it possible to put a counter onto the spreadsheet so we can see how many times it is being opened
View 10 Replies View RelatedI'm copying values from one workbook to another. Each value has to be checked, so I do this in two steps.
View 2 Replies View RelatedI have a input worksheet and in this user have to manually enter the sequence no. The sequence no. heading is not always in one cell that can be in any between any cell from D14 to D21.
I need some code which start the sequence no. with 1 and everytime I click add button. It find the sequence no. in range between D14: D21 and add 1 in the relavant adjacent cell (which can be in from E14 to E21).
See Table below
Start withColumn DColumn ERow No. can be any from 14 to 21Sequence No.1Clicked AddDesiredColumn DColumn ERow No. can be any from 14 to 21Sequence No.2DesiredColumn DColumn ERow No. can be any from 14 to 21Sequence No.previous val +1 and so on
I am trying to use the sumproduct as a counter. I have done it numerous time with success; however, I am trying to use it where it incorporates a wildcard text to include or exclude as part of my count criteria:
=SUMPRODUCT((Sheet1!$A:$A=Sheet2!$A9)*(Sheet1!$C:$C="Fixed")*(Sheet1!$AG:$AG"*CCAP"))is
My issue is that it does not recognize the wildcard, and does not return the correct item.
I will include the macro that I have completed so far. The problem is that Each time the macro is run, I need it to place a number next to the info in consecutive order. This should make sense after you run the macro.
Sub MacroIllinois()
'1 a Number
'2 Text (a string)
Dim i As String 'Give me a variable to save the name in
i = Application.InputBox("Enter your name please", Type:=2)
ActiveCell.FormulaR1C1 = ActiveCell.Value & Chr(10) & i
With ActiveCell.Characters(Start:=1, Length:=17).Font
.Name = "Arial"
.FontStyle = "Regular"
.Size = 11
.ThemeColor = xlThemeColorLight1
.TintAndShade = 0
.ThemeFont = xlThemeFontNone
End With
End Sub
i have this formula in cell C14
="Today Is The "&U3-V7+1&"th Day Of "&IF(VLOOKUP(U3,AC10:AD17,2)="winter","Winter","")&IF(VLOOKUP(U3,AC10:AD17,2)="Fall","Fall","")&IF(VLOOKUP(U3,AC10:AD17,2)="Summer","Summer","")&IF(VLOOKUP(U3,AC10:AD17,2)="Spring","Spring","")
it returns " Today is the 92th Day Of Summer " *number and "Season" changes*
i want changing the 92th when the number changes.
so if it was 1 it would be "1st"
2 would be "2nd"
3 would be "3rd"
than 4-9 would be "4th,5th,6th..etc (as normal)
also counts for double digit number
21st 32nd 43rd
and also counting the days..today is the 92 day of summer but when it gets to the 1st day of fall it going to say 94th day of fall..when i want it to say 1st day of fall... than start counting the days of fall than so on for each season..
here are the dates for the seasons
3/20 is spring
6/21 is summer
9/22 is fall
12/21 is winter
3/20/2010 is spring
6/21/"" is summer
9/22/"" is fall
12/21"" is winter
I am not experienced at all with Excel, here is my problem: In column "A": I have 288 rows and has nothing but numbers in them. Row 1 is the lowest number, row 288 is the highest number. In each row the numbers typically increase; every once in a while the numbers may stay the same, but the number will never be lower. The numbers range from 0 through 600,000.
What I want to do is have column "B" follow column "A" until the cell total reaches 12000. The next cell in column "B" would then reset and start all over from "0". I want it to keep on reseting every 12000 counts. Another potential problem is that a majority of the time the cell value will not be an even 12000, 24000, 36000 etc. They may be more like A40: 11742 A41: 13201 etc.
I have this in J22 (a counter that starts from the value of the cell):
=IF(B37=4;J22+1;J22)
We know that J22 value at the start is 0 (by excel default)..
Is it possible to change the value of J22 (using VBA) without losing the formula in the cell (for instance sometimes I need it to start from 3 and other times from 7..) ? I can't change it using another cell, I need to use only J22..
I am trying to find out how to get a "counter" of sorts so i can tell how many times a certain word shows up in a given column.
View 9 Replies View RelatedI am trying to attach a counter to a variable. I am trying to attach the counter "k" to the variable "A", instead of separately writing code for A1, A2, A3, and A4. Each variable corresponds to the same worksheet function calculation (such as average in this case), but refers to a different set of data. So, if I run the following code, it does not work. I know how to do it using an array.
VB:
Option Explicit
Dim A1 As Double, A2 As Double, A3 As Double, A4 As Double
Dim k As Integer
[Code] ....
I have attached the excel file : Book1.xlsm
I have a rather big worksheet with lots of sheets in it. I need to see in the frontpage how many sheets there are in total (-2, the frontpage & end sheet don't count) and how many sheets are currently shown (ie. not hidden, as there are vba-filters which sheets to display).
I don't really mind how it is shown, it could be one cell with 14/53 meaning 14 sheets shown of a total 53 or in seperate cells.
I need to have a running counter of transactions within an account.
Solved with: C2=COUNTIF($B$4:B4,B4)
(and copy down)
Example:
ACCTNO AMT Trans#
100125.001
100121.002
100122.50 3
1001 2.00 4
1001 5.00 5
100127.00 6
1013 .50 1
1013 2.50 2
1013 13.00 3
I need to solve for the Trans# I've included it here for clarity, but I need to be able to get that number based on the ACCTNO. Notice the Counter Resets to 1 when the ACCTNO changes from 1001 to 1013.
I have in cell A1, as display, a value [500]. This display is calculated in cell B1 [=200+300], here I may change the values. To draw attention, I want the display [500] to continuously start from 100 to 500 [like a counter where it stops at 500 and starts again from 100]. This display will be idle if the value is under 250.
It would be more lively if a progress bar is shown; maybe using the REPT function [REPT("I",50)] where the "I" starts over again and again after the 50th times is reached.