My code is meant to ensure a string in a cell begins with three letters and ends with 5 numbers. It seems to work, but how can I exit the loop and go to the message box once the boolean variable is set to true? I was hoping to avoid using labels. Also, I would appreciate any suggestions in compacting the code if possible, but without using CreateObjects".
Private Sub Worksheet_Change(ByVal Target As Range)
If Intersect(Target, Range("h17")) Is Nothing Then Exit Sub
Dim Ls As String
Dim i As Integer, z As Integer
Dim MyString As String
Dim MyClVal As String: MyClVal = Target.Value
Dim MyBL As Boolean: MyBL = False
I have a For Each...Next loop to read and write data from one workbook to another. Now, it's possible but unlikely that a certain "wellindex" (as defined by the Column A value) occurs more than once in the source spreadsheet, and only the most recent value should be used. And now to the actual question. Currently my macro runs a check to see if the current cell's wellindex has already been used, and if so, then it warns the user of potential double-entry. What I'd like to have it do is have it check whether the current cell's wellindex has duplicates further down (e.g., using a "findnext" method), and if so, then skip to the next cell in the For...next loop. I know that I can exit a loop with "Exit For" but I don't know how to have it go straight to "Next c" without embedding everything in an If statement.
Sub DataImport() 'Define variables Dim sourcedata, sourcename, originname, sourcedate As String 'filename variables Dim wellindex, ch4, co2, o2, bal, adj, com As String 'data variables Dim cor, owp, owp2 As String, overwrite As Integer 'prompting variables overwrite = 0 'Set up the data source originname = ActiveWorkbook.Name sourcedata = Application. GetOpenFilename("Data Output Files (*.csv), *.csv", , "Open the source file").........................
I have a table named INPUT and a unique list named MODELLIST. I am doing a find function for each model from the modellist to the table input. I am using a autofilter to sort data and find to collect column data. Some models from the modellist may not be present in the table input. how do I check first if there is any data and exit loop if true. The following is part of the code that I am using and the error that is displayed is NEXT without FOR
Dim rFoundIt As Range Dim iLoop As Integer For Each model In Worksheets("sheet2").Range("modellist") Worksheets("input").Activate Selection.AutoFilter Field:=3, Criteria1:=model With Sheets("input").Range("input") Set rFoundIt = .Cells(1, 1) For iLoop = 1 To WorksheetFunction. CountIf _ (Sheets("input").Range("input"), model)...............
So say you have a loop running a large number (on the order of 1 to 10 billion loops) and you want to exit after some amount of time x, what is the most efficient way to do this?
doing something like:
Code: stTime=timer do while timer-stTime < x *do stuff* loop is slow...
i also could approximate the time per loop and only check when the counter passes that general area...but i dont want to use a counter either
This loop is to find if there is the string "Need Parent " in the range. If so the Msgbox notifies the user.
After it finds the string, the loop needs to exit- I tried to assign a counter to the MsgBox, but no go....
For i = 6 To lLrw If Range("D" & i).Value = "Need Parent" Then MsgBox "Stop. Parent Records Still Need To Be Created." End If ii = MsgBox + 1 If MsgBox > 0 Then Exit For End If Next i
I would like to call upon a function until a certain criterion is fullfilled. Then, I would like to have the result returned to me and exit (all) open functions. For value1 = 1 and value2 = 10 I expect value1*value2 = 100. Instead, the routine returnz zero. What is the logical flaw in the code below.
Function testfunction(value1, value2) If value1 = value2 Then 'Calculating the difference testfunction = value1 * value2 Exit Function ElseIf value1 < value2 Then value1 = value1 + 1 Call testfunction(matrix1, matrix2) End If End Function
for each value in column "h" if value = "k" then check the respective value in column "b" = null loop should iterate for entire column then print its null
I'm trying to print the list of dates for the particular month . where the start date and end date is given by the user through user form.
I have written the below code to generate the dates. but the for loop still continues even when the start date is greater than the end date.
For example if i enter the startdate as 06/01/2014 and enddate as 06/30/2014. the for loop continues and displays date for all 40 days instead of stopping when the condition is met.
I am writing a very simple Do While loop where VBA searches for the first nonempty cell in a column starting from cell C3. The error I get is "Overflow". I suspect that when all cells are empty it goes down the column till the last cell, which is around 65,000. How can I put a restriction on this loop? I need the search to be restricted to range C3:C95, because my data ends in row 95. In other words, the code essentially should do this: go from cell C3 to cell C95 and search for the first nonempy cell in this range. When you find the first nonempty cell, assign name "x" to this first nonempty cell.
I have a piece of code that basically performs a calculation and prints one value to a worksheet at the end. This code is part of a larger simulation model and by the end of the model this piece of code is executed thousands of times and thousands of values are printed to the worksheet. However, at the start of that piece of code there is an if statement which influences the end result. My question is, how to identify which end values were calculated using each method in the for loop.
For example would it be possible to highlight the cell (in which the value is printed) in red if the
VB: num= 0
Part of the if statement was used and highlight the cell (in which the value is printed) in green if the
VB: num= 1
Part of the if statement was used?
This would identify which values were calculated using each method.
VB: 'Change in Model set prior value If ws1.Range("D" & Rows.count).End(xlUp).Row < 2 Then num = 1 counter1 = counter1 + 1 sh1.Range("g3").Value = counter1
i have a set of data as below and wish to delete ENTIRE ROW if cell is the same but keep the first entry when code comes to it..ie in the data set below excel would keep first row and delete 2nd,3rd,5th, 6,7,8 and then go to next unique identifier which would be AU0000LIFHB3 this would not be deleted as it is unique the would proceed to AU300GPTC011. this process would then stop when no data was available
I have a piece of code that put a check in all checkbox in column B from row 5 to row 50 but in column C, I have data from row 5 to 38. I want the macro to stop at row 38 in column B. When the cell in column C is empty stop putting checks in column B. How can I make this macro Check all checkbox down column B and stop when column C is empty. How do I add a loop to stop when the cell in column C is empty?
Private Sub CommandButton1_Click() Dim CB As Variant For Each CB In ActiveSheet.CheckBoxes CB.Value = False Next End Sub.......
I am trying to perform a calculation in a cell that leaves the value 0 if before Feb 2014, changes to the value of another cell in Feb 2014 and leaves the value unchanged if after Feb 2014. I can get to the Feb 2014 value but after that month the value changes to 0.
The Cell formula that I am trying to use is as follows:
I would like to try and achive a conditional format that will require a lookup function. when the condition is met it places Yes or No into a cell and changes that row colour to red for the NO condition. and after 10 days from now the rowcolour is removed.
I have some code that expects the user to select a file to open. If they don't select a file it posts an error message "Stopping because you didn't select a file" then it exits. However then Excel pops a debug window. How can I get it to cleanly exit and not pop the debug window?
I entered an activex object command thing.. and now I'm not sure how to exit out of it.. it just keeps alerting errors messages like reference is not valid and other ones depending on what I type in the formula box.
I just want to remove the object, but I can't get past the error alerts.. they just keep coming every single time I click somewhere on the workbook trying to exit out of it.. so I'm not sure how to even get out of it.. I don't want to open up Task Manager to exit out of the entire program because I didn't save my workbook.
I have the code below assigned to a commandbutton. I also have 4 or so other private sub macros on this worksheet. When the activecell is in range 2 and I push the button, it exits the sub routine like it's supposed to. But then it deactivates all the other macros and they won't work again until I close the workbook. How can I get this code to exit the macro if the first if statement is true and to not affect any other macros?
I have an input box which has OK and cancel buttons If the user clicks cancel I would like to routine to end, which I can do with exit sub. However this particular sub routine has been called from another so the rest of the code continues. Is there a way of exiting all the routines on cancel -- or a neater way than exit sub ?
I'm using a multipage control on a form that has the style set to fmTabStyleButtons. So it uses buttons instead of tabs. I named one of my buttons (tabs) to Close. Can I set this up to where just pressing the Close button will cause it to exit the app not just go to that page?
I have two userform combo boxes, the second follows up on the results of the first.
The second Combo Box looks for incomplete fields and provides them in a drop box. If the data the second Combo Box is looking at (This is different data than the first Combo Box is looking at.) is complete it updates the field, if not then it adds it to the drop down list.
My problem is this, if it finds everything updated and nothing is added to the drop-down list, how do I exit? I just want a complete break where all programming ends.
I am in the Initialize subroutine and I have tried Exit Sub and it still brings up the user form.
I have 2 sheets to this program. I open the properties to change the ScrollArea of Sheet1 to $A$1:$N$24 so the users that will be using this cannot scroll down to see data. As soon as I hit save, or even Save As and replace the file, then reopen it, I am able to scroll on Sheet1. Now, I do not recall if this same thing was happening prior to restricting access to the workbook or not. One thought I have is because I am the fully authorized user, is that why, even after saving I am able to scroll? Would someone who does not have the permissions that I do in the work book not be able to scroll? Or am I just missing something small?
I use the macro below to loop through files, which works fine. Can the code be modified so that when a specific file is opened, the entire macro stops? Exit Sub only seems to stop the inner loop, but I would like the entire macro to be stopped.
Sub Loop_Through_Files() Dim FSO As Scripting.FileSystemObject Dim FF As Scripting.Folder Set FSO = New Scripting.FileSystemObject Set FF = FSO.GetFolder("D:") DoOneFolder FF
