I have something simple (i think) but i cant think it through. I have a range of cells that are populated by a link and so even though the value shows #,### It really shows #,###.########
I would like to trim everything after the decimal point without having to adjust format of the range since some cells are general format and others are Percentage format but they all suffer from .####### HOWEVER, the last digits are variable and never the exact same amount of characters.
for each cell in range("C4:J9")
if cell.value "" then
Trim(Left(cell,4))
end if
next cell
I have a cell which holds text with a maximum number of characters of 6. Let´s say I want this cell to hold a word which is bigger, and trim it till it has 6 characters.
Example: word "Hippopotamus" (longer than 6 characters) should be trimmed so its displayed as "Hippop"(6 characters)
is there a way to specify how i want to trim, either right or left? Example "Hippop"(6 characters trim right) or "otamus" (6 characters trim left)
This formula I want to apply it in another workbook. It split in different columns the content of a cell.
The formula is below:
[Code] .....
In cell A2 I have the following data: |516582-001-99|414816-001-99|414816-003-99|516582-001-99|
If I apply the formula above in cells B2 to E2 it returns a blank cells. But if I delete the first "|" sign in the left side manually the formula works perfectly by splitting the cell into columns from B2 to E2. The issue here is that I have more than 300,000 records. Just imagine the amount of time invested in just deleting the first "|" at the left side.
I need a variation of the formula above that in first place delete the first "|" at the left side and after that continue with the proper work of the formula.
I have a column contains Postal Adress in more than 5000 rows. Column contains Door Number, Area, City and Zip code. I need to separate "Zip code" alone in next coulmn. Zip code (of India) will be in six digits like "600083" also some cases contain space in middle of zip code like "600 083" (after 3 digits). Is there any way to do this without doing cut & paste?
I have a column contains Telephone numbers with or without area code and country code for across the country (India). I need to extract the telephone numbers alone (neither area code nor country code). Telephone numbers will be 6 or 7 or 8 digits (not more than that). Is it possible to extract any set of numbers contain 6 or 7 or 8 digits continously? Some of the cases contains 2 contact numbers (2 set of 6 or 7 or 8 digit characters, between special characters will be there like slash, comma, space, hypen, etc.,
In my column of text strings, I have a multiple format of strings make-up. Below is just one of them I have to check that the first 6 are digits from 0 to 9, and it is followed by a hypen. If condition is true, the first 6 digits is the output (ie. 345678).
However, if I were to continue doing this for other strings, I would soon run out of characters limit that is allowed in a cell. I wonder whether a formulae such as below is valid? Any suggestion or help for a shorter formula is very much appreciated.
The macro I have select 2 columns and 2000 rows. I need a VBA code that will loop through each of these 4000 cells and remove all characters (replace them with blanks) that are not a number, a period or a decimal. Characters from other languages like Chinese, Japanese and Russian should also be removed.
I am trying to write a formula that will recgonise either text or numicial value as the result is used with a match formula. In column C I have data as follows:
1400 SBY 1230 9985 ADO
I am using a =--RIGHT(C4,4) formula in column E to get the required data and then using my match formula to extract other data. How can I rewrite the above formula so that it can read either text or numbers that will allow my match formula to work.
I have a list of numbers in which I need to return the last 5 digits; the length of the string may vary.
However, if the last two digits of the number ends in a specific value then it should skip over the last two numbers and return the preceding 5 digits.
I have tried and have used the very basic Left, Right and Mid functions. My problem is I dont know how to code the formula to identify the last two digits and skip over them, if necessary.
I have provided an attached example.
Extract numeric value based upon ending characters.xlsm
I thought I had this solved but an inconsistency has shown up. I have a long list of chemical formulas that I want to format (partially) as subscript.
Basically what I need the macro to do is look at each character within a cell and check to see if it is numeric. If it is AND it follows a non-numeric character it should be formatted as subscript.
Examples H2O the 2 should be subscript H2SO4 the 2 and the 4 should be subscript 2CCl4 only the 4 should be subscript
I have a long list of chemical formulas that I want to format (partially) as subscript.
Basically what I need the macro to do is look at each character within a cell and check to see if it is numeric. If it is AND it follows a non-numeric character it should be formatted as subscript.
Examples H2O the 2 should be subscript H2SO4 the 2 and the 4 should be subscript 2CCl4 only the 4 should be subscript CuSO4 - 5H2O
The formula below was posted recently as a way to extract a numeric substring from somewhere in larger string. When I first saw this formula, how it "came up with the goods" and so I spent some time looking at parts of it to see what they did.
Although I've made some progress, I still don't fully understand it. Heres the formula, and below Ive detailed how far I've got:
1. The formula is returning the first substring of contiguous numeric characters from the full string in Cell A1 2. 9.99e + 307 ensures that the search value won't be exceeded by the returned value. 3. The Mid function uses Min(Find( to get the character position of the first numeric in A1 (so MID then has its first 2 parameters). So far so good. 4. Now... I cant work out where MID parameter 3 (the substring length) comes from. I suspect its the row function, but can't see how as this isn't an array formula, and without CTRL+Shift+ Enter, I could only get Row to return 1 in my experiments (giving me only the first substring digit).
How does the formula return the correct number of numeric characters, (apparently) without counting them?
I have come up with this to Trim all of the data from rows 2:30 removing any trailing spaces after the last word in each cell. The macro takes a couple of minutes to run have I got something wrong that is making it run slowly or does the Trim process just take longer?
Sub TRIM_RANGE() Dim myRange As Range Dim myRow As Range Sheets("CAMPAIGNS_2007").Select Set myRange = Range("2:30") If myRange Is Nothing Then Exit Sub Application. ScreenUpdating = False myRange.Replace What:=Chr(160), Replacement:=Chr(32), _ LookAt:=xlPart, SearchOrder:=xlByRows, MatchCase:=False For Each myRow In myRange.Columns If Application. CountA(myRow) > 0 Then myRow.TextToColumns Destination:=myRow(1), _ DataType:=xlFixedWidth, FieldInfo:=Array(0, 1) End If Next myRow Application.ScreenUpdating = True End Sub
I would like to sort words or data which has the First capital letter, words which has spaces and words which contains number... i have attached a sample file.
I have obtained the following data which I need to put into a spreadsheet to import into an accounts program. I can't change the way I get the data which is as follow
Hrs worked Rate 05:55:00£30.00/Hour 07:40:00£21.00/Hour 05:45:00£30.00/Hour
What I need to have is 5.92 30.00 7.67 21.00 5.75 30.00 ie the time format in decimal and loose all the unnecessary symbols etc for the rate
I have a vba macro that takes data from one workbook and pastes it into another workbook. In doing this I have declared a few variables of type single (I only need two decimal precision). However, when I copy the values from the cells on the source workbook and paste them into the target workbook, the numbers end up having 12 decimal places. Ultimately, this extra precision causes my totals to be off by .01 or more after a while. I have tried rounding the number as I pull it off the source workbook into the variable, but that didn't matter. How do I solve this problem? Code for pulling data from source workbook:...
Basically, I want to format a group of cells to display 1 decimal figure if the number is not a whole number. If the number is a whole number (or if the rounded first decimal place is 0) I want it to display no decimal.
I need to convert a column of numbers currently formatted with 2 decimal places e.g. 112.12 to 4 decimal places (without the decimal point). I need the end result to be 1121200. I've tried a few different suggestions given on the forum previously but can't seem to retain the 4 decimal places that I require.
I am trying to create a unique sample code by putting together the values of other cells that a user will input. It's all working well apart from the last part, where I am trying to include a decimal number. I want the decimal number to appear without the central "." and in a four digit format. e.g. 2.5 would appear as 0250, 14.25 would appear as 1425. This is the formlua I am using currently:
However, where the value of H4 is 2.5, I am getting a result of 0303 (I've put this part in bold). I have attached a small spreadsheet to aid understanding.
I am trying to do is extract the volume size of products in 'ml' from 10k plus products from a description field cell. this description field could also contain the weight of the product in grams so I cannot just do a search for a numeric string , it has to be associated with the milli-litres statement .
is is possible to do a sort of ' *ml ' search and then select and copy to another cell ???
I need a formula to multiply only the decimal number in a cell and not the integer. For example: the number in the cell is 57.3615. I want to multiply .3615 only.
I have a column of several thousand entries listed as numeric with a scientific symbol eg.
1.4mSv 19.53mSv/1mSv (some have a mix and or alpha/numeric range)
I want to convert them to the numeric value only. I'm extracting to a chart which is not recognising the alpha and throwing the data out. I tried find and replace, trying various options within the 'replace format' tab with no joy.
I have a few thousand products codes (i.e ABCD123BLA08 or SHU267BLA) They are non standardised in length or structure. I wish to pull out everything upto the end of the third numeric digit.( ie ABCD123 and SHU267) I cannot use left as they are all different lengths. Ideally i would serach for a non numeric char after the number then use left up to that point. Search can't do this, FIND can't do this.
Summary ABCD123BLA08 would be ABCD123 SHU246BLU would be SHU246 I147ORT08-12 would be I147
19352510 C084111X AA 24253081 A001290U AA 19599291 48413321
I want to write an If Statement is a column next to each entry that denotes two options either Broker or Agent. Where the code is say 19352510 then Broker and where it is say C084111X AA then Agent.
Broker codes will never contain a letter. The Agent code will always start and finish with a letter.
Is there an Excel formula to remove the spacebar + characters in red, as shown below? I need to be left with only the last name, first name and the semicolon.
Mouse, Mickey ;
Microsoft Outlook has changed the way that email addresses from the global addressbook copy and paste (from version 2003 to version 2010).