I have tried using the below mentioned macro. However, it only work on one cell. I need to copy and paste a range from A1:Q200.
Sub retrievedata()
Dim wbResult As Workbook, wbSource As Workbook, CopyRng As Range, Dest As Range
Dim FileName As String, Filt As String
Set wbResult = ThisWorkbook
Set Dest = wbResult. Sheets("Data").Range("A1:Q200")
Application. ScreenUpdating = False
Application.DisplayAlerts = False
Filt = "All Files (*.*),*.*"
FileName = Application. GetOpenFilename(Filt)
Set wbSource = Workbooks.Open(FileName)
Set CopyRng = wbSource.Sheets("Summary").Range("A1:Q200")
Dest = CopyRng
Application.ScreenUpdating = True
Application.DisplayAlerts = True
wbResult.Activate
wbSource.Close
End Sub
I am unable to copy and paste on a particular worksheet. It is not protected nor are the cells locked. I can copy one or more cell's contents, but as soon as I click into the cell I wish to copy to, the paste icon greys out. Using VBA code to do the same fails at the same point.
One of my workbooks contains 6 worksheets. Quite often I need to copy a row of data from sheet 5 to sheet 1. I right click, copy, select sheet 1, right click and find that the paste options are greyed out and so unavailable. If I wanted to, all the other sheets would allow me to paste the data into them but not sheet 1. It did work until recently so I suspect that it is something that I have inadvertantly done. I have checked things like security, protection and the like but find myself now going around in circles.
The following code is doing what I want it to do in part, its copying the data in range k3 to q3 to the next empty row in columns a to f
It works when I change any cell in column K (11), I want to change to only on a change in K7 or K8? As an afterthought if I'm dealing with the same sheet do I need to make reference to sheet2?
VB: Private Sub Worksheet_Change(ByVal Target As Range) Dim nextRow As Long If Target.Column = 11 And Target.Cells.Count = 1 Then
I am using below code to copy data and paste after a certain row. I want in below code first copy data Range("C4:R46") and paste it automatically 50 times after 43 rows but with this condition.
I need a macro that will copy a selected range from an existing worksheet in a workbook and paste the data to the last row in another workbook on a particular worksheet.
I have a range of cells with data from one day. This range is "C36:K63"
Each day, the prior day's range needs to be copied and pasted into a new range that begins two rows below where the prior day's range ends.
Thus, day two should copy "C36:K63" into a new range: "C65:K92"
As you can tell, the rows will change each day, but the columns will always remain the same.
How can I create a macro that allows a user to copy data from the most recent range and paste it into a new range?
i.e. if there is no data in C65:K92, the macro should copy the data from C36:K63 and paste it into C65:K92. Then, the next day, the macro would copy the data from C65:K92 and paste into C94:K121.
I previously posted a problem related to copying data from one sheet and paste it in another workbook when "Delivered" is chosen from a drop down menu. Everything works fine with my dummy files, but a problem comes up when I try to incorporate this code into the original file.
The issue is that once the code copies the info from the range A3:D3 it has to paste it into different cells in the other workbook.
Please see the attached file to see where I need the data from the range A3:D3 to be pasted.
Ive been trying to find out how i can paste information in the next available column but between certain columns. Here is an example of what im trying to do. There is a calculator which represents 3 machines. It runs different senerios if you change the % of product going into it (cells to change this are light blue). What im trying to do is take the information the machine outputs to the right and organize it on the next worksheet.
The data on the next worksheet is a combination of all the machines performance (in yellow) together and the machines personal performance (in red). when the button is pushed currently, I have the overall scenerios information filling down rows. What I would also like it to do is see if im using a machine (because it can be turned off by changing the usage to 0%), and if I am, copy the results form the individual machine to the next worksheet. When it copies it needs to see if the first machine slot is open and if not the second and paste in the available location. I cant have a specific spot for each machine on the real worksheet cause there are maybe 100 machines and if 15 are used I only want the first 15 machine info slots filled and im gonna hide the rest of the columns. The way the columns fill also cant be like the rows where it looks for next available free spot. It has to only be for the specific range in red because there is info to the right of where this is going.
Sub Send_Data() Sheets("Calculator Sheet").Select Range("AD9, AE9, AG9").Copy Sheets("output sheet").Select Range("B65536").End(xlUp).Select ActiveCell.Offset(1, 0).Select Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _ :=False, Transpose:=False End Sub
I have a workbook with 2 - worksheets "DATA" and "LETTER".
The "DATA" sheet has columns "First Name" "Last Name" "Address"...etc.
The user can enter in either a "X" or a "x" in cells B6:B100 on the "DATA" worksheet.
After the user enters a X or x and hits the macro button I need it to copy certain cells from "DATA" worksheet to "LETTER" worksheet. I have listed a example below.
In this example if a "X" or "x" is entered into B6 on "DATA" worksheet and the macro button is hit, then: ....
I'm trying to find a macro that will copy data from the areas of B120:E179 and I120:K179 for example (linked to another worksheet within the workbook) and special paste (Values Only and skipping blank cells) it to the next available open cell up top where basic data entry will be taking place B10:E29 and I10:K29. I need it to only copy/paste the rows with data (skipping all cells/rows with no data) and once it is finished coping I will need it to place an "X" in column M next to the row that it copied data from. I would also need it to reference the data in each row from B to E and if there is an entry say on B14 to E14 that matches it but if I10 to E29 are blank then paste that information on row 14. If it does not match or if those columns are full then paste on next available line.
I hope I'm making sense here. This is for a vehicle tracking log between checkpoints. Each driver and info will be listed on each row. Columns B through E will contain information for each driver: name, badge, #passengers, and vehicle #. The log lists location, time, and destination for outgoing travelers in columns F to H. Incoming info is listed on Columns I to K............
I have data in some of the cells within range A26:A39
These cells are populated via an IF function on another worksheet. Even though the cells appear blank (as in the value returned is ""), there is a formula in these cells. I think it's called formula blank?
I am looking for a way to copy the data from the cells within the range which are not blank (ie: not = "") and paste this data elsewhere on the sheet in a list with no blank spaces in between.
I anticipate that there will be 4 non blank cells within this range.
Ideally I would have data from the nonblank cells copied and pasted to cells A40 A41 A42 A43
I would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.
The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?
Trying to assign code to comm. button on User form to copy lets say:
(sheet1, rangeB2:B21) to (sheet2, first blank row rangeB2:B21) and paste it as text value one more question: what to be aware in case of sheets format (merged cells, hidden rows...)
Need a code using application.inputbox to get a range, then use that range to copy and paste the range's link and format to a different sheet? The specifics don't matter, I just can't figure out the syntax. Here is what I have currently:
To initialize some cells/ranges, I am copying a given range and pasting it to another given range using the. Copy and .PaseSpecial methods. However, it would seem that both methods actually select the range(s) for the operations, i.e. the given ranges(s) are activated/selected thus changing the focus on the spreadsheet. I would like to perform both operations without actually selecting the given ranges.
I have the following code that let's the user choose and " import" data to an existing sheet. It works well up until now. The problem is that the three ranges that I am trying to copy the data from on workbook to another has changed size. In previous version of my workbooks the range was two columns by 10 rows. Now, it is 1 column by 10 rows. So, when I run this macro it doesn't work because the two ranges are different. Is there any way to: 1) Only copy over one of the rows of a range thus making the macro run?
2) Do not run that part of the macro if there is an error?
Thanks so much for reading this long-winded description but the error is a big problem
im currently using a Code that copies a visible range from one workbook and pastes that Range to another workbook. I dont like it though because every time it pastes the screen jumps.
I tried setting Range 1 = Range 2, its not giving me an error but its not "pasting" the information to the 2nd workbook.
I know ive done it before by doing each cell in each row individually but a its a big Data Table and that would take too long.
can somone tell me why the attached code will not work it works for the first range only but when others added it fails also how do you clear outline of copied cells, i used range ("D9").Select but no good.
[A20].End(xlUp) takes care of the 19th row .. how can I adjust the range to start at row 8 ?
Sub CopyBoldCells() Application.ScreenUpdating = False Dim rng As Range Range("A1:A10").Select For Each rng In Selection If rng.Font.Bold = True Then Rows("" & rng.Row & ":" & rng.Row & "").Copy Sheets("Sheet2").Select [A20].End(xlUp).Offset(1, 0).Select ActiveSheet.Paste Sheets("Sheet1").Select End If Next rng Application.ScreenUpdating = True End Sub
I am using below code to copy certain data(Range("C4:R46")) and paste after certain row(After 43 rows) with 50 times
I want to popup a inputbox who asked for how many time u want to paste data, if i choose 4 then paste data after certain row(After 43 rows) with 4 times
If I choose 14 then paste data after certain row(After 43 rows) with 14 times
i facing another problem at here and do not know how to write the part of coding. it is pending for 2 weeks. i do not know how to explain so i attach the excel to explain. i hope can get any reply soon.
