I need to copy and paste the specific dates from the specific city that the user will insert in the "dash" sheet. Basically, I need the macro to read the city and range of dates that the user will type into the "dash" sheet and copy the columns "AA" to "AD" from rows specified by the dates input. Once it has been copied, it has to be special pasted just the value onto the sheet "1" beginning at location B2.
the the data will not be available as it is vlookups to another excel sheet that i have not provided. I have deleted the data, but you can pretty much put 1's everywhere.
I have a form with a number of fields. There is a field at the top of the form for Part number. When I type in a part number I need the form to auto complete any fields that are linked (if i can link them). E.g., if the part number is 111 then based on info in another table the fields will be auto completed for me.
I want to automate the following steps when cell A8:A11 changes in sheet "InfoAA":
(1) clear contents and formats of cells A1:A4 in sheet "InfoBB" (2) copy cells A8:A11 of sheet "InfoAA" (which are formulas) and past it as text in cells A1:A4 of sheet "InfoBB". (3) then automatically run a recorded macro named "BoldFirstName"
I'm not sure that I'll be able to explain this clearly, so I've attached an example. There are 3 columns - Issue, Action Group and Status. Many Issues belong to the same Action Group and others do not belong to any Action Group. The is also a Status summary section that has the total Issues and Actions associated with each status. For example the Status called Resolved could have 10 issues and 5 Actions (including blanks). The problem is that I can't figure out a way to get the total for the Actions. As I said this explanantion isn't great, so the attached sheet
I am very new to Macro programming. I want to set up a macro which will copy data from few cells in a sheet and paste them as "Values" to certain specific locations in another sheet based on criteria. This copy paste needs to be done for about 40 different cells. I want to fix this with a button on the source sheet, so that this process happens when the button is clicked. I am attaching a sample file showing what I need.
I need to copy specific rows that have a specific value in colum B and Colum M to new worksheets.
So from attached screenshot , say for an example macro shud filter rows that have "BigPond" in coloum B ,"RG2" in column M & "INT" in column W and i dont want all cells in these rows , i only want copy cells under column C,AK,AL,AM (in this order) to my other excel sheet that is named "BigPond" and it should paste it starting from Row5?
I want to avoid recording a macro as it selects a range and i am expecting more new rows every week so if a record a macro the cell range for selection changes and i get incorrect result.
I have a file that has two sheets, I have some formulas in the first sheet named "Data",What i would like to have is, If column G in the sheet Data is "Closed", then i want that particular row to be cut from the sheet " Data" and pated in to the Sheet "Done".
I have a command button that I want to automatically copy and paste certain data to another worksheet when clicked. I keep getting a "runtime error 1004; application-defined or object-defined error". The code I have so far is:
I have spent a few days searching through forums but cannot find examples that i have been able to successfully adapt ( because they are to complicated for my limited knowledge). I have a workbook with 5 sheets, sheet1 (current), and sheet 4 (archive) are the important ones. I need a macro to
A) copy rows from "current" to "archive" ( to the 1st empty row) if column S of "current" contains "Closed" ( the word is generated by formula).
B) The paste needs to paste special values and number formats ( want to lose formula but not conditional formatting).
C) data sort "archives" based on col A - this puts the newly archived data into correct sequence.Data sort lowest number 1st
D) delete the copied rows from "current".
e) give me a count of how many rows it deleted, (I have a macro to insert rows so will run that manually to recreate the correct number of emtpy rows (with formula and formatting) to bring the current sheet back to usual size.
I tried modifying a macro by RPaulson (based on cells on one sheet to cells on another), to work with entire rows but couldn't get it to work.
Found that paste special uses PasteSpecial xlPasteValues, but , and thats about it.
I am have a spread sheet (sheet 1) with a number of columns and what i am looking to do is see all the people that are participating in a certain stage in the process that is not common, So what i am wanting to do is copy the names and the corresponding number of these people (on sheet1) over to a new worksheet(sheet2) based on a yes or no criteria further on in the spread sheet(sheet1). sheet 2 has additional columns that the workers here would need to fill in.
The criteria is in sheet 1 cells Y2:Y2000 The number is in sheet 1 cells D2:d2000 The names are in sheet 1 cells E2:e2000
If its at all possible i would also like to then make the names of those people on sheet 1 a hyperlink to the additional information
For what I'd like to do, the attached workbook actually represents 3 worksheet. one input sheet and two output sheets (output1 and output2)
I plan to use command button " CommandButton1" on input sheet to start the calculations
Here's what I want to do after pressing the " CommandButton1" :
1. start with case 1 and find the value of Input A to Input J from input table using Vlookup and paste those values to respective palceholder for inputs in blue colour area above the input table for each input.
2.for empty cell in the input table paste 0 (zero)
3. after this will give results for case 1 inputs on sheets "output1" and "output2" on basis of formulas used for each output
4.then copy the results for case 1 inputs from sheet "output1" and "output2" and paste them on "input sheet " in Output table (its below Input Table) next to case1
5.Do this for all cases (in actual workbook there will be more than 100 cases)
I am copying from cell A2 to C2, then A8 to C8, etc. if the cell in column "A" contains the text "Item" until the end of data in column A. Here is what I am attempting:
Sub MoveItem() sText = "Item" sText = LCase(sText) iMax = Cells.SpecialCells(xlCellTypeLastCell).Row For i1 = iMax To 1 Step -1 If InStr(1, LCase(Cells(i1, 1)), sText) <> 0 Then Cells(i1, 1).Copy Destination:=Cells(i1, 3) End If Next i1 End Sub
The problem is the destination location. If I define it as a Range eg: Cells(i1, 1).Copy Destination:=Range("C2") The macro works, but does not iterate the destination cell.
I need help with creating a macro that runs when a user enters a value in the 'Numbers' column, copies and pastes data in the corresponding worksheet 'Worksheet' column by the value of 'Numbers' column data. An excel file is attached.
I have a macro that would check data in Column A and validate if a particular number is repeating, then for that number go to column B, Take the Values from there go to a new sheet and paste the values in a row.
I am trying to copy a range of cells, based on a set of criteria that changes constantly.
In Column A, I have numerical values that are present every 10th cell. In columns B through D, I have various text data that corresponds to the number in Column A. So for example, in A50, I have the number 46975. In the range B50-D59, I have text data that goes with the number in A50.
Each day I run a few calculations and based on the number I get, I want to find the exact match in column A, then copy all the data in columns B through D that are related. So if my calculations result in 46975, I want to automatically copy over to another worksheet the range B50-D59.
which I have modified from one that I use before for sheets 1 & 3 (instead of 4&5)
But it isn't working! I have defined a dynamic range in sheet 4, which is the range I want to search (its named "search") should i be using this range in the formula somewhere?
Private Sub CommandButton1_Click()
Dim rngFind As Range Dim strFirstAddress As String
With Sheet4.UsedRange Set rngFind = . Find(ComboBox1.Text, LookIn:=xlValues) If Not rngFind Is Nothing Then strFirstAddress = rngFind.Address Do rngFind.EntireRow.Copy Sheet5.Range("A" & Sheet5.Rows.Count).End(xlUp).Offset(0, 0) Set rngFind = .FindNext(rngFind) Loop While Not rngFind Is Nothing And rngFind.Address <> strFirstAddress End If ..................
I'm looking to create a macro that will take data from an input sheet, and paste it into a cell in another worksheet, based on criteria specified in sheet1.
Specifically in the attached example, the macro would copy the data in cells C8:C10 of sheet 1, then paste them into sheet 2 based on the data specified in cell B3 i.e. it would paste them into the column headed Mar-09. I intend to make this cell a drop down, so that the user can then select the next reporting month and run the macro again to paste the data into the Apr-09 column.
Please see attached sample worksheet. Column A will be generated by the user manually.
I'm looking for a way in VBA to have A1:D20 in Sheet2 copied and pasted in the "Bank Reconciliation" Sheet based on how many "Markets" there are in Column A. Then, once that's complete to have A22:D30 (the smaller box in Sheet2) copied and pasted directly below those results.
I have what the macro would hopefully generate to the right in "Bank Reconciliation" (B6:E54) as an example. So if there's a market in A1, copy and paste the box to B6. If there's a market in A2, copy and paste the box directly below the first (B26) etc. etc. until it's done, then paste the smaller box directly below whatever the macro generates.
I have a worksheet with some info that is filled in from other employees. I have Customer Name, Date of Oldest Invoice, Avg. Days Beyond terms in column N42:N44, with the data in column M42:44. I want to copy and paste that into another workbook, I need to transpose the data and then paste it into the next blank row. IF POSSIBLE, I would like to have some of the column headings the same as the above fields, and I would like to paste the data into the correct column heading.
Currently I have the code listed below. It copies the data, opens the spreadsheet, (this is where it fails) find the next blank row and transpose and paste the data. It does transpose and paste the data but it does not look for the next blank row, instead it just transposes and pastes the data in the last cell that was active when the work book was closed.
Private Sub CommandButton1_Click()' Paste Macro ' Macro recorded 5/14/14 ' ' Range("O42:O47").Select Selection.Copy
Workbooks.Open Filename:="L:Financial Services! FRA !! Preston !3rd Party Collections Accounts 2014.xls"