vlookup with 3 different variables, for example cells k4 k5 and k6 can be changed to give different variables. Is it possible to have a vlookup function in cell k9 which returns the correct % when the 3 variables are chosen. example, blue boat 48 would return %value of 21%
View 2 RepliesI have been having diffuculty stringing two cell contents together using the operand: '&'. Is there another way to do a VLOOKUP on two variables?
View 2 Replies View Relatedwith this line of code
res = Application.VLookup(1110, Range("b1:L65536"), 2, False)
it is searching for the number 1110 in the code is it posible to replace the 1110 with a variable??
I need to figure out a vlookup function that searches for two variables and return an answer. such as the example attached;
vlookup -- 12253 & 605.34 (if these are matching then) 131001
I need to be able to do a look up in 9 different table arrays using 9 different ranges.
I have attached a worksheet to help explain. My problem is that I can't have 9 IF statements in one formula.
I am not sure how to make this smaller or work.
This was a snap in Lotus. Unfortunately, the VLOOKUP and HLOOKUP formulas don't translate to Excel on conversion. I need to estimate the weight of reinforcing steel in concrete based on 7 different sizes of rebar and spacing of the bar between 1" and 24".
I have created a matrix(lookup table) with the bar spacing listed in decimal equivilents in feet on the top row.Inthe row below, I have numbered the columns from 1 to 24. the next row is blank. Along the left side of the matrix, I have listed the bar sizes 3 thru 10. Within the table I have listed all the bar weights/SF of concrete. IE if the slab has 1 mat of #5 rebar spaced 6" oc. If you look in row 7, under column 6, the weight of weight of the bar in that sf of concrete is found. In the part of the worksheet where the caculations are performed set up as follows:.....
I am trying to use VB to vlookup between to workbooks
1. Make active workbook WBK1
2. Make workbook being open WBK2
3. Copy and Paste between WBK1 and WBK2
4. Have a vlookup in WBK1 and bring in the values from WBK2
5. Close WKB2
6. Copy, Paste, and transpose values in wkb1 within wkb1
The script works fine until it reaches the vlookup step. I have used the vlookup by itself without the copy and paste code successfully but when I combine the two it provides me with the error 9. Subscript out of range.
Unzip Code - Works without Variables, Breaks with Variables.... This has been driving me bananas...
I have the
Can a Function give two or more output variables. e.g.
Sub a()
x = 5
result = Y(x)
End Sub
Function Y (x As Integer) As Integer
Dim B
B = ... * x
Y = ... * B
this will give back Y as a result. But if I want to get 2 or more output variables (let's say I need to get also B into sub) from one function, how should I do that?
I need this because function works with large matrix and I want to extract some values appeared in between.
I'm trying to loop through a range in excel from access, checking where the titles (in Excel row 1) match with the fields (in a recordset in Access that is passed to the function) - and where they do, I want to dimension a variable to hold the column number - I'm not sure it's possible, but I'd be interested to know either way. The line I'm asking about is at the bottom of the code - the rest of the code is just to give context...
Sub ImportGeneric(rsImported As ADODB.Recordset, rsConfirmed As ADODB.Recordset)
Dim fd As FileDialog
Dim xl As New Excel.Application
Dim wb As Excel.Workbook
Dim ws As Worksheet
Dim iFilePicked As Integer
Dim strFilePath As String
fd.Filters.clear
fd.Filters.Add "Excel files", "*.xls"
fd.ButtonName = "Select"
iFilePicked = fd.Show
If iFilePicked = -1 Then
strFilePath = fd.SelectedItems(1)
Else ..................
i have a "problem" to empty / reset my variables. I defined them as vHour1_KW2 where the "1" is from 1 to 21 and the "2" starts from 1 to 53. Now I want to erase all of this variables or to set the value of them to "0".
At moment I use following
vHour1_KW1 = 0
vHour1_KW2 = 0
...
vHour1_KW53 = 0
vHour2_KW1 = 0
vHour2_KW2 = 0
...
vHour2_KW53 = 0
until...............................
I have a Vlookup which I want to modify so that it can become dynamic as the table array part of the vlookup will change.
So the basic vlookup is as follows:
=VLOOKUP($R$3,ATTRIBUTION_FACTSET!$M$60:$P$73,2,0)
but the data I am looking for wont always be in the range M60:P73.
So I tried to make it dynamic by doing the following:
=VLOOKUP($R$3,INDIRECT("ATTRIBUTION_FACTSET"&"!M"&U1&":P"&V1),2,FALSE)
The idea being that U1 and V1 would be numbers that can change so in this case U1 would equal 60 and V1 would equal 73
This vlookup is giving me #N/A and no matter how I modify it I cannot get it to work.
I have a sheet using VLookup to find EMail and Web addresses. I can get the address to show up but not as an active URL address. Is it possible to have the address "active" so I can click on it and activate the EMail or Web Site?
View 5 Replies View RelatedI'm trying to do a Vlookup on a file that gets automatically downloaded to the computer from a website. The data is in lots of different data sets, like so:
Loans to countries
Mar
Apr
May
Jun
Loans to banks
Mar
Apr
May
Jun
Every month a new row of data gets added to each table, meaning the start and end cells of the array also shift each time.
I'm currently trying to vlookup the same data from 2 different sheets. Here is the code i've tried.
View 4 Replies View RelatedI’m trying to develop a workbook which holds monthly data on loan information. It tracks the interest and balance on the loan. I want the first page to have a table displaying the interest payments for every individual tab. When I was brainstorming the idea, I was considering a sort of Vlookup function to find the tab the account is on and then a further function, possibly another vlookup which connects the month to that month’s interest payment. Can anyone help me figure this out?
The attached spreadsheet is obviously simplified, there are well over 30 tabs. But I would like it to, ideally, search the account number column, search the workbook for that account number, and then when on that page use the month at the top of the first page and retrieve the interest payment and put it back in the cell. It’d also be great if the formula can be transferred between workbooks. I’m not sure if that makes sense; basically if I were to copy that worksheet into the next months book, I would like that the formula read those tabs instead of becoming obsolete due to references from the first workbook.
I have data in a pivottable which I want to compare with another table. The lastcolumn+1 of the pivottable needs to get data from another table. I have this for an example:
View 5 Replies View RelatedI have a spreadsheet (Need Data.xls) that needs to be filled out with a couple columns of data.
This data lays within 338 spreadsheets which have many items and may only have 2, or 3, or 50 that belong on my Need Data.xls spreadsheet.
I have a tab in Need Data.xls named "DIR" which has a list of 336 excel files that need to vlookup'd into.(not a separate file) They're all setup with this format:
I'm having a hard time understanding how to accomplish what seems to be a simple result.
I need to display one of two words, based on whether or not a pair of values are above or below the criteria.
FIRST:
IF H6 is greater than 5000
AND
IF AB6 is greater than 25000
Display: Double
SECOND:
IF H6 is less than 5000
AND
IF AB6 is greater than 25000
Display: Single
There is no 3rd scenario, even though logically there should be.
I am trying to put variables in this URL which is related to yahoo finance :
.Name="hp?s=NVDA&a=00&b=31&c=2001&d=11&e=29&f=2006&g=m&y=0"
I defined at the beginning
Dim start_date As Date
Dim end_date As Date
Dim datestring As Variant
start_date = #1/31/2001#
end_date = #11/26/2006#
and put them in datestring
I passed the datestring to a new sub which has the URL:
.Name="hp?s=NVDA&a=00&b=31&c=2001&d=11&e=29&f=2006&g=m&y=0"
So, my question is, i tried to put the (1/31/2001) and (26/11/2007) which is in the above URL which is separated in variables and the URL remain the same
I am trying to use COUNTIF with two critera. If this isn't possible is there any other way possible of doing this in a range of cells.
What I am trying to do is show the amount of students in a year group who spend x amount of hours on the internet and have a target grade (for example) of Lvl 4
I have been trying use a formula along the lines of =COUNTIF (Q5yr7, "0- 1Hour", Q12yr7, "4")
I am trying to count the status and type of some work so:
Column A would contain the status of the work e.g. open, in progress, closed etc.
Column B would contain the department: ict, development, operations, etc.
I want to do a summary that shows: How many are in ICT are open, closed etc.
I can do a countif to get the total open, in progress etc or total number of ICT jobs but not ICT In progress.
I am trying to add an additional criteria to the following sumproduct formula. The formula below works fine to add up values that are within a date range. However, I want to add values within a specified date range as well as one additional variable. The additional variable is in column G.
SUMPRODUCT(--($A$3:$A$1015>=$A1026),--($A$3:$A$1015<=$B1026),D$3:D$1015)
Trying to work out the formulas for placing plus minus variables above and below a cell as per worksheet attached. right hand side of the page
View 2 Replies View RelatedI want to make an excel funktion than can distinguish between 3 variables. The three variables are the outcomes of my first function which are 0, 1 and 2 these IF functions can be seen below:
=IF(B11>52;"1";"0")
=IF(B12>5;"1";"0")
Then when I have these results I have tried the following function:
=IF(C11+C12=2;"6-12";"4-6")
By using this function I get an output for 2 (true) and 0 (false), but I would also like an output for 1 (which would be 6 in my work)
It looks like this:
Var 1 58 1
Var 2 4 0
Suggestion 4-6
So in the above case where the sum of var1 and var2 is 1 it is only counted as false for not being 2 and therefore = 4-6 instead of what I would like it to be = 6 (for 1)
I'm trying to count cells in one column that match a variable only if it also matches a variable in another column. For example, I want to count all of the cells in column A that match "Franklin" only if column D shows "True".
View 5 Replies View RelatedSay I have a list of part numbers, and each part number has an X or a 0 next to it, depending on my own set parameter.
How do I then report that data on another tab so that it counts how many there are in a set area AND if its an X.
At the moment I have this:
Can I put two variables into a SumIF? forexample I want to sum Column C if Column A is equal to Apples and Column B is equal to Oranges, then sum Column C. Is there a quick formula?
View 3 Replies View RelatedI am having real trouble with a formula.
I have used a similar formula for to calculate a column.
Can any one see where I am going wrong. It is the cell highlighted in yellow on the attached spreadsheet.
I'm having trouble with my logic again :/
AREA
Tp std
Tp
30
5
So I want the Tp in the 3rd column to show the result:
IF AREA is less than or equal to 20, Tp=Tp std / 2
IF AREA is between 20 and 40, Tp=(((AREA-20)/(40-20))*(Tp std/2))+(Tp std/2)
IF AREA is 40 or greater Tp = Tp std
But as one equation
I have just been struggling with the range part.