Say I have a list of part numbers, and each part number has an X or a 0 next to it, depending on my own set parameter.
How do I then report that data on another tab so that it counts how many there are in a set area AND if its an X.
At the moment I have this:
Unzip Code - Works without Variables, Breaks with Variables.... This has been driving me bananas...
I have the
I am using the formula to count if c- is in the cells: =COUNTIF($B2:$U2,"C-")
However, I need to change the formula so rather than just count if C- is in the cells, I need it to count if A*, A+,A, A-, or B+ are in the cell instead.
Can a Function give two or more output variables. e.g.
Sub a()
x = 5
result = Y(x)
End Sub
Function Y (x As Integer) As Integer
Dim B
B = ... * x
Y = ... * B
this will give back Y as a result. But if I want to get 2 or more output variables (let's say I need to get also B into sub) from one function, how should I do that?
I need this because function works with large matrix and I want to extract some values appeared in between.
I'm currently working with the formula
=COUNTIFS(Data[Quarter],"Q1",Data[Country],A3,Data[Sales],">2000")
However I need the formula to count only one for the n possible duplicates in the Data[Name] column.
I am looking for a replacement to the function COUNTIFS that will work with Excel 97-03. I have attached a sample of the document which will hopefully demonstrate what I am trying to achieve. On the sheet labelled 'Data' there is four headings (MerRefs, JCPRefs, Self Refs and Other) for the results beneath these headings I have used the Countifs function. I have attempted to use the SUMIF as an array formula but couldn't get this to work.
Also in the hope of killing two birds with one stone, I created this in Excel 2007 and in the past when I have saved documents as 97-03 documents it used to warn me of any incompatible functions included within the doc and now it doesent. Where can I switch that setting on?
I'm trying to do a COUNTIFS for a set of data. What I want it to do is pull everything that is assigned to a certain person that has no date in one column, and information in another. For example:
Name
Date
Comment
Michelle
4/30/14
Closed
Michelle
Issue
Michelle
4/30/14
Closed
Michelle
4/30/14
Closed
Michelle
Issue
So based on this dataset, I would get the number 2 for Michelle (row 2 and 5 have no date in column B and a comment in column C). I've tried a few variations and can't seem to make it work right.
I am using the COUNTIFS function. I can us it with simple criterias but unsure to go about this criteria.
I would only like to count the cells if the range in question is equal or greater than S3 but is equal or less than T3.
I don't know how to use the => signs.
I have a list of information regarding jobs that need to be carried out by a number of companies by a number of dates. What I want to count is the number of jobs that company A need to caary out by a specific date and then the number that company B need to carry out by the same date. The formula basically needs to say countif column a equals company A and column C equals 11/11/09. I have tried numerous combinations of IF, Countif, SUMif, And etc but can't get the formula to work,
View 9 Replies View RelatedI'm looking to count the following:
A B
a 1
a 1
b 0
b 1
c 0
a 1
If column A=a AND column B=1, add column B on the same axis. I can only get a function that adds all B column if A=a. The function should equal 3. Cells B1, B2 and B6 should be the only ones counted.
I'm trying to loop through a range in excel from access, checking where the titles (in Excel row 1) match with the fields (in a recordset in Access that is passed to the function) - and where they do, I want to dimension a variable to hold the column number - I'm not sure it's possible, but I'd be interested to know either way. The line I'm asking about is at the bottom of the code - the rest of the code is just to give context...
Sub ImportGeneric(rsImported As ADODB.Recordset, rsConfirmed As ADODB.Recordset)
Dim fd As FileDialog
Dim xl As New Excel.Application
Dim wb As Excel.Workbook
Dim ws As Worksheet
Dim iFilePicked As Integer
Dim strFilePath As String
fd.Filters.clear
fd.Filters.Add "Excel files", "*.xls"
fd.ButtonName = "Select"
iFilePicked = fd.Show
If iFilePicked = -1 Then
strFilePath = fd.SelectedItems(1)
Else ..................
I have the following formula: =IF((COUNTIFS(data_sheet!U:U,Monthly_Report!H10))>166,0,COUNTIFS(data_sheet!U:U,Monthly_Report!H10,data_sheet!BN:BN,"Premier"))
This formula counts values on my data sheet based on the specified criteria. I have this broken ito 3 section, each section that needs to be summed.
Section 1 can not be greater than 165, if it is all the values in the range needs to be reset to 0
Section 2 can not be greater than 190, but at the same time can not be less than 166, else is need to be reset to 0. How would I adjust the above mentioned formula to check these criteria?
I'm currently using the following function: =COUNTIFS(Data[Quarter],"Q1",Data[Country],A3,Data[Sales],">2000") which works perfectly. However I'd like to add another condition "between 1000 and 2000".
I've tried this but I'm not getting any luck: =COUNTIFS(Data[Quarter],"Q1",Data[Country],A3,Data[Sales],AND("<1000",">2000")).
=COUNTIFS('Gone Out'!L:L,"=27/05/2014",'Gone Out'!A:A,"=John Smith")
Where I have the date why will this not work?
=COUNTIFS('Gone Out'!M:M,"=E12",'Gone Out'!B:B,"=John Smith")
I have 27/05/2014 that in E12 but it keeps giving 0 instead of the actual number
Also, How would I make it so that instead of adding 1 to the value, i could add John Smith's Age?
So I have a formula which contains a countifs that looks like this:
=COUNTIFS($AZ:$AZ,$AZ15,$AM:$AM,ABS($AM15),$AD:$AD,$AD15)
However, I want the formula to count values when ABS($AM:$AM)=ABS($AM15) but I get an error if I try to put ABS($AM:$AM) as my range. Is there anyway to set my range as the absolute value of Column?
I have also tried ABS($AM15:$AM1000).
I am writing a formula to accomplish the goal of counting only unique text values in a column, based upon two different factors:
*Need to Count unique text values in column named 'CASE_NAME'
*Column 'FISCAL' must match cell A5
*Column 'ZONE' must match cell A3
I have a COUNTIFS function that, among other criteria, only counts cells in which the value is "P". I now want to modify this function to count cells in which the value is "LA" in addition to cells in which the value is "P". I'm not sure how to work this into the argument. I tried using OR("P","LA"), but that's not working.
View 3 Replies View RelatedI am having a problem getting my formula to return a result. The basics are that I would like a count of a specific set of data in a section of a workbook. So in column 'A' I am searching for 'TextA' but this also has to have 'TextB' in column C. The problem is I have 12 consecutive monthly worksheets I would like to pull this data from and I only really want to write one formula. I can (and started to) use the countifs function plus countifs function etc referencing each worksheet individually but this seems long winded.
I have read on this forum that I can use sumproduct combined with countifs but I can't seem to get it right. I have listed my formula for a single sheet countifs function below, but I don't know how or if to include the sumproduct function to reference the rest of the monthly worksheets. The other thing I should mention is that there are other worksheets too, so it would need to be specific to this range, but they are consecutive within the workbook.
How to combine many criteria in a COUNTIFS formula with the same range.
I made a formula:
=COUNTIFS(brut!$B:$B;"1T";brut!$G:$G;"F25"; brut!$C:$C;"1")
And it works fine, but I need four more conditions -
brut!$C$C; "2", brut!$C$C; "3", brut!$C$C; "4" and brut!$C$C; "5".
When I change the formula to
=COUNTIFS(brut!$B:$B;"1T";brut!$G:$G;"F25"; brut!$C:$C;"1"; brut!$C$C; "2"; brut!$C$C; "3"; brut!$C$C; "4"; brut!$C$C; "5")
It didn't work anymore.
I don't know how to use IF and COUNTIFS together.
I have a column of data that contains a two letter identifier, which can sometimes be combined with another 2 letter indentifier: Example
Column D
AA
DC
DC,AA
How would I get countifs to count each occurrence of AA or DC by itself?
I need to look at a series of data once per week and calculate the results. I'm trying to use COUNTIFS to get a result based on both the date I'm doing the analysis for and for the response.
I've attached a sheet that shows a sample of what I'm trying to do. Cell B1 contains the date range I'm using, and cell B18 shows the formula I'm having trouble with. I suspect it's because I'm trying to treat a date like text, but I'm not sure.
I am using COUNTIFS to work a formula for finding an average of a SUMPRODUCT. Formula:
View 2 Replies View RelatedI have the following excel formula:
=LOWER(IF(($H2&":"&$M2&":"&$N2&":"&TEXT(COUNTIFS($H2:$H$2,$H2,$M2:$M$2,$M2,$N2:$N$2,$N2),"0000"))=": ::0000","",$H2&":"&$M2&":"&$N2&":"&TEXT(COUNTIFS($H2:$H$2,$H2,$M2:$M$2,$M2,$N2:$N$2,$N2),"0000")))
I need to convert the COUNTIFS into something that is Excel 2003 friendly.
I'm trying to use this formula in a cell but it keeps giving me #NAME.
What does this mean?
check out the COUNTIFS function on Data Tables Sheet -> Cell D29 and pls. let me know what's going on. I need is : To calculate the number of items on system data tab which has the "Pending" status and items which belongs to month "Jan-10" under a particular person selected from B 27 cell (Data tables tab).
I solved it by using >=01-01-10 and <=31-01-10 criteria but i don't think its nice idea .... I tried to use AND(function by got failed ...........
I'm trying to find total gross commission within a spreadsheet, where gross commission found in Deals column Q. Columns T & U indicate with an "X" whether the deal was associated with referrals and such.
=SUMIFS(Deals!$Q$2:$Q$500, Deals!$T$2:$T$500, "x",Deals!$C$2:$C$500,">=1/1/2005",Deals!$C$2:$C$500,"<1/1/2006")
=SUMIFS(Deals!$Q$2:$Q$500, Deals!$U$2:$U$500, "x",Deals!$C$2:$C$500,">=1/1/2005",Deals!$C$2:$C$500,"<1/1/2006")
But now I need to sumif Q2:Q500 excluding rows where "X appears in either T or U, or both, to indicated complete self-generated deals.
I am looking for a COUNTIFS that is only looking only at the visible cells. I have found a few threads on this subject but none for this specific problem.I know there is a SUMPRODUCT / SUBTOTAL excel solution for COUNTIFSing visible cells only. How modify it to take multiple ranges and criteria like CONUTIFS does.
[Code].....
I need a COUNTIFS function (I think that will be the best function to use at least).
I have a two columns of data, column one is dates (mm/dd/yyyy) and column two is states (AK, MA, MI, etc). I need a way to count how many times a states comes up for a certain month. For example, I need to know how many times MA appears through the dates 1/1/2007 and 1/31/2007. Here's what I have so far. It works but I can only specify one date. =COUNTIFS('SHEET NAME'!D:D, "1/5/2007", 'SHEET NAME'!E:E, "MA")
i have 10 sheets in my workbook and i wanted to do countifs on every sheet for column a so i have created 2 more sheet one called start the other call end and moved them start before sheet1 and end after sheet 10
this is the formula i was trying to use =COUNTIFS(Start!:End!A:A,finished!A3)
I have some named ranges and am trying to do a "Countifs" based off the named ranges. But Excel is giving me obvious incorrect data (my fault, not Excel's). I can't really post a pic of the issue, hopefully it's an obvious error on my part.
For instance
SpecialPart is a named range consisting of part numbers that I want to count seperately from all others.
PartNumber is a named range of all parts shipped for a period.
I used countifs becuase I am also checking by month. The month part works fine because I use it in other countifs. It's just this one that isn't working for me.
My formula looks like this;
=Countifs(Pmonth,Month(A3),PartNumber,SpecialPart)
As mentioned, the month part of the formula works in other calculations, but the Part/SpecialPart calculation keeps returning a "1" even though there are multiple instances of a match for each month. A manual count of January showed about 100 lines that should have been counted.