Distinguishing Between 3 Variables
Jan 20, 2009
I want to make an excel funktion than can distinguish between 3 variables. The three variables are the outcomes of my first function which are 0, 1 and 2 these IF functions can be seen below:
=IF(B11>52;"1";"0")
=IF(B12>5;"1";"0")
Then when I have these results I have tried the following function:
=IF(C11+C12=2;"6-12";"4-6")
By using this function I get an output for 2 (true) and 0 (false), but I would also like an output for 1 (which would be 6 in my work)
It looks like this:
Var 1 58 1
Var 2 4 0
Suggestion 4-6
So in the above case where the sum of var1 and var2 is 1 it is only counted as false for not being 2 and therefore = 4-6 instead of what I would like it to be = 6 (for 1)
View 13 Replies
ADVERTISEMENT
Apr 10, 2014
is there a formula i could use to distinguish between a character being text or a character being value?
i.e.
Cell A1 = 1
Cell A2 = G
=If(A1="value",TRUE,FALSE), answer = TRUE
=If(A2="text",TRUE,FALSE), answer = TRUE
View 3 Replies
View Related
Apr 25, 2014
The following formula looks through a list of names (in this case, looking for Joe Smith) in the monthly tab (in this case, MARCH) from column B and enters the calculated value associated with that name from column G. The formula works fine, but when there is no value in column G, it returns a 0% (format in the receiving cell is set for %). This would be fine, but since it does not distinguish between a true 0% and a blank cell, this is causing a problem.
=SUMIF(MARCH!B2:B31,"Joe Smith",MARCH!$G$2:$G$31)
View 8 Replies
View Related
Dec 17, 2012
Suppose I have a cell containing the formula:
Code:
=INDIRECT("'"&B$3&"'!J"&ROW($J11))
Which pulls data in from another sheet in the workbook. If the referenced cell is empty, this has value 0.
I'd like to then include this cell in the calculation of an average, ignoring it if the cell it pulls from is empty but including it if that cell contains 0.
View 2 Replies
View Related
Mar 20, 2014
VBA code which can distinguish whether a cell has been edited by:
selecting an option from a data validation list (DVL)
or
manually editing the text in a cell?
The ""Show error alert after invalid data is entered"" option is unticked to allow both selection from the DVL as well as free format text entries.
The problem arises when using the code below which makes an edited cell within a range display the new value as well as the prior value(s). This works well when using the DVL but not when editing the cell.
Is there any code which can distinguish between the 2?
[Code] ....
View 5 Replies
View Related
Feb 5, 2009
Unzip Code - Works without Variables, Breaks with Variables.... This has been driving me bananas...
I have the
View 2 Replies
View Related
Jul 27, 2006
Can a Function give two or more output variables. e.g.
Sub a()
x = 5
result = Y(x)
End Sub
Function Y (x As Integer) As Integer
Dim B
B = ... * x
Y = ... * B
this will give back Y as a result. But if I want to get 2 or more output variables (let's say I need to get also B into sub) from one function, how should I do that?
I need this because function works with large matrix and I want to extract some values appeared in between.
View 2 Replies
View Related
Apr 27, 2006
I'm trying to loop through a range in excel from access, checking where the titles (in Excel row 1) match with the fields (in a recordset in Access that is passed to the function) - and where they do, I want to dimension a variable to hold the column number - I'm not sure it's possible, but I'd be interested to know either way. The line I'm asking about is at the bottom of the code - the rest of the code is just to give context...
Sub ImportGeneric(rsImported As ADODB.Recordset, rsConfirmed As ADODB.Recordset)
Dim fd As FileDialog
Dim xl As New Excel.Application
Dim wb As Excel.Workbook
Dim ws As Worksheet
Dim iFilePicked As Integer
Dim strFilePath As String
fd.Filters.clear
fd.Filters.Add "Excel files", "*.xls"
fd.ButtonName = "Select"
iFilePicked = fd.Show
If iFilePicked = -1 Then
strFilePath = fd.SelectedItems(1)
Else ..................
View 3 Replies
View Related
Jan 16, 2007
i have a "problem" to empty / reset my variables. I defined them as vHour1_KW2 where the "1" is from 1 to 21 and the "2" starts from 1 to 53. Now I want to erase all of this variables or to set the value of them to "0".
At moment I use following
vHour1_KW1 = 0
vHour1_KW2 = 0
...
vHour1_KW53 = 0
vHour2_KW1 = 0
vHour2_KW2 = 0
...
vHour2_KW53 = 0
until...............................
View 3 Replies
View Related
Apr 9, 2014
I'm having a hard time understanding how to accomplish what seems to be a simple result.
I need to display one of two words, based on whether or not a pair of values are above or below the criteria.
FIRST:
IF H6 is greater than 5000
AND
IF AB6 is greater than 25000
Display: Double
SECOND:
IF H6 is less than 5000
AND
IF AB6 is greater than 25000
Display: Single
There is no 3rd scenario, even though logically there should be.
View 13 Replies
View Related
Apr 1, 2008
I am trying to put variables in this URL which is related to yahoo finance :
.Name="hp?s=NVDA&a=00&b=31&c=2001&d=11&e=29&f=2006&g=m&y=0"
I defined at the beginning
Dim start_date As Date
Dim end_date As Date
Dim datestring As Variant
start_date = #1/31/2001#
end_date = #11/26/2006#
and put them in datestring
I passed the datestring to a new sub which has the URL:
.Name="hp?s=NVDA&a=00&b=31&c=2001&d=11&e=29&f=2006&g=m&y=0"
So, my question is, i tried to put the (1/31/2001) and (26/11/2007) which is in the above URL which is separated in variables and the URL remain the same
View 11 Replies
View Related
Jul 6, 2012
I am trying to use COUNTIF with two critera. If this isn't possible is there any other way possible of doing this in a range of cells.
What I am trying to do is show the amount of students in a year group who spend x amount of hours on the internet and have a target grade (for example) of Lvl 4
I have been trying use a formula along the lines of =COUNTIF (Q5yr7, "0- 1Hour", Q12yr7, "4")
View 9 Replies
View Related
Jun 26, 2014
vlookup with 3 different variables, for example cells k4 k5 and k6 can be changed to give different variables. Is it possible to have a vlookup function in cell k9 which returns the correct % when the 3 variables are chosen. example, blue boat 48 would return %value of 21%
View 2 Replies
View Related
Aug 1, 2014
I am trying to count the status and type of some work so:
Column A would contain the status of the work e.g. open, in progress, closed etc.
Column B would contain the department: ict, development, operations, etc.
I want to do a summary that shows: How many are in ICT are open, closed etc.
I can do a countif to get the total open, in progress etc or total number of ICT jobs but not ICT In progress.
View 1 Replies
View Related
Feb 19, 2008
I am trying to add an additional criteria to the following sumproduct formula. The formula below works fine to add up values that are within a date range. However, I want to add values within a specified date range as well as one additional variable. The additional variable is in column G.
SUMPRODUCT(--($A$3:$A$1015>=$A1026),--($A$3:$A$1015<=$B1026),D$3:D$1015)
View 10 Replies
View Related
Nov 30, 2008
Trying to work out the formulas for placing plus minus variables above and below a cell as per worksheet attached. right hand side of the page
View 2 Replies
View Related
Apr 14, 2009
I'm trying to count cells in one column that match a variable only if it also matches a variable in another column. For example, I want to count all of the cells in column A that match "Franklin" only if column D shows "True".
View 5 Replies
View Related
Apr 21, 2009
Say I have a list of part numbers, and each part number has an X or a 0 next to it, depending on my own set parameter.
How do I then report that data on another tab so that it counts how many there are in a set area AND if its an X.
At the moment I have this:
View 7 Replies
View Related
Feb 5, 2010
Can I put two variables into a SumIF? forexample I want to sum Column C if Column A is equal to Apples and Column B is equal to Oranges, then sum Column C. Is there a quick formula?
View 3 Replies
View Related
Feb 18, 2010
I am having real trouble with a formula.
I have used a similar formula for to calculate a column.
Can any one see where I am going wrong. It is the cell highlighted in yellow on the attached spreadsheet.
View 14 Replies
View Related
Feb 14, 2013
I'm having trouble with my logic again :/
AREA
Tp std
Tp
30
5
So I want the Tp in the 3rd column to show the result:
IF AREA is less than or equal to 20, Tp=Tp std / 2
IF AREA is between 20 and 40, Tp=(((AREA-20)/(40-20))*(Tp std/2))+(Tp std/2)
IF AREA is 40 or greater Tp = Tp std
But as one equation
I have just been struggling with the range part.
View 2 Replies
View Related
May 15, 2009
I am trying to OFFSET from cell A1 based upon a variable in cell A2. The cell I need to OFFSET to is also located in column A, but it could always differ based upon the variable in A2. Here is the piece of code performing this OFFSET.
View 7 Replies
View Related
Aug 23, 2009
I used a macro to get the following code, but would like to do this with VBA code where I use variables and numbers instead of the
macro's ("I568:J568") notation. Thus I would have something like (lRow, 9) : (lRow, 10) or whatever the correct notation is. Basically I'm trying to copy and paste formulas from one row to the next.
View 4 Replies
View Related
Sep 3, 2009
Is there a way to change variables while the code is running?
View 11 Replies
View Related
Sep 17, 2009
I know that we should declare all variables at the beginning of a subroutine, in fact I'm told it's good practice to use Option explicit to 'force' variables to be declared, my question is why?
If I don't declare a variable the routine still seems to work OK so what is the downside of not declaring them upfront? Is it just for neatness or common practice or is there another reason?
View 2 Replies
View Related
Nov 14, 2009
I want to schedule a report to run overnight when I'm not at work, and it needs to save as a filename with the previous day included in it
For example, the filename needs to be saved as
C:Test_variable_ver1.xls where variable is equal to day(today()-1) in excel terms.
View 3 Replies
View Related
Oct 8, 2008
I have to count a specific column based on two criterias...
Column B Column C
SCD Y
ECD Y
DCD N
SCD N
SCD N
I have tried =COUNT(IF(AND(B3:B51="SCD",C3:C51="Y"),1,0)) But that doesn't seem to give me anything but a "0".
View 6 Replies
View Related
Sep 29, 2011
I want to have formula with: ActiveCell:formula = I want to sum columns in a row having a column variable called: col The col variable will be the far right column and the other colunm in Row 2 will be col-3. What is the syntax to create this formula? If col = 5, formula normally would be :sum(b2:c5), I want to use col as the varialbe.
View 3 Replies
View Related
Oct 9, 2011
In VBA, I just want to use an object within a formula that represents rows within a range of cells.
Here's what I mean. I create an variable named "additup":
additup = 2 'This value represents that row number I will want in the following messed up formula:
ActiveCell.FormulaR1C1 = "=IF(ISNUMBER(RC[-7]),RC[-7]/MAX(range(P(additup:Padditup+6000")),"""")"
Above, the formula checks if the cell that is 7 columns to the left is a number, and if so, divide it by the max value within the range (Col P, Row= additup) : (Col P, Row= additup+6000).
Clearly my problem is VBA syntax.
View 2 Replies
View Related
Jan 3, 2012
For our monthly report we would like to make a sum formular where the end column is a variable, so it can be updated one time instead of updating every formular. When I try a text formular it doesn't calculate but only show the text string. ="=sum(b5:"& a1 & "5)" so I can enter c in cell a1 for 2 comumn/month summation.
View 5 Replies
View Related
