I'm having a hard time understanding how to accomplish what seems to be a simple result.
I need to display one of two words, based on whether or not a pair of values are above or below the criteria.
FIRST:
IF H6 is greater than 5000
AND
IF AB6 is greater than 25000
Display: Double
SECOND:
IF H6 is less than 5000
AND
IF AB6 is greater than 25000
Display: Single
There is no 3rd scenario, even though logically there should be.
Unzip Code - Works without Variables, Breaks with Variables.... This has been driving me bananas...
I have the
Can a Function give two or more output variables. e.g.
Sub a()
x = 5
result = Y(x)
End Sub
Function Y (x As Integer) As Integer
Dim B
B = ... * x
Y = ... * B
this will give back Y as a result. But if I want to get 2 or more output variables (let's say I need to get also B into sub) from one function, how should I do that?
I need this because function works with large matrix and I want to extract some values appeared in between.
I'm trying to loop through a range in excel from access, checking where the titles (in Excel row 1) match with the fields (in a recordset in Access that is passed to the function) - and where they do, I want to dimension a variable to hold the column number - I'm not sure it's possible, but I'd be interested to know either way. The line I'm asking about is at the bottom of the code - the rest of the code is just to give context...
Sub ImportGeneric(rsImported As ADODB.Recordset, rsConfirmed As ADODB.Recordset)
Dim fd As FileDialog
Dim xl As New Excel.Application
Dim wb As Excel.Workbook
Dim ws As Worksheet
Dim iFilePicked As Integer
Dim strFilePath As String
fd.Filters.clear
fd.Filters.Add "Excel files", "*.xls"
fd.ButtonName = "Select"
iFilePicked = fd.Show
If iFilePicked = -1 Then
strFilePath = fd.SelectedItems(1)
Else ..................
i have a "problem" to empty / reset my variables. I defined them as vHour1_KW2 where the "1" is from 1 to 21 and the "2" starts from 1 to 53. Now I want to erase all of this variables or to set the value of them to "0".
At moment I use following
vHour1_KW1 = 0
vHour1_KW2 = 0
...
vHour1_KW53 = 0
vHour2_KW1 = 0
vHour2_KW2 = 0
...
vHour2_KW53 = 0
until...............................
I am trying to put variables in this URL which is related to yahoo finance :
.Name="hp?s=NVDA&a=00&b=31&c=2001&d=11&e=29&f=2006&g=m&y=0"
I defined at the beginning
Dim start_date As Date
Dim end_date As Date
Dim datestring As Variant
start_date = #1/31/2001#
end_date = #11/26/2006#
and put them in datestring
I passed the datestring to a new sub which has the URL:
.Name="hp?s=NVDA&a=00&b=31&c=2001&d=11&e=29&f=2006&g=m&y=0"
So, my question is, i tried to put the (1/31/2001) and (26/11/2007) which is in the above URL which is separated in variables and the URL remain the same
I am trying to use COUNTIF with two critera. If this isn't possible is there any other way possible of doing this in a range of cells.
What I am trying to do is show the amount of students in a year group who spend x amount of hours on the internet and have a target grade (for example) of Lvl 4
I have been trying use a formula along the lines of =COUNTIF (Q5yr7, "0- 1Hour", Q12yr7, "4")
vlookup with 3 different variables, for example cells k4 k5 and k6 can be changed to give different variables. Is it possible to have a vlookup function in cell k9 which returns the correct % when the 3 variables are chosen. example, blue boat 48 would return %value of 21%
View 2 Replies View RelatedI am trying to count the status and type of some work so:
Column A would contain the status of the work e.g. open, in progress, closed etc.
Column B would contain the department: ict, development, operations, etc.
I want to do a summary that shows: How many are in ICT are open, closed etc.
I can do a countif to get the total open, in progress etc or total number of ICT jobs but not ICT In progress.
I am trying to add an additional criteria to the following sumproduct formula. The formula below works fine to add up values that are within a date range. However, I want to add values within a specified date range as well as one additional variable. The additional variable is in column G.
SUMPRODUCT(--($A$3:$A$1015>=$A1026),--($A$3:$A$1015<=$B1026),D$3:D$1015)
Trying to work out the formulas for placing plus minus variables above and below a cell as per worksheet attached. right hand side of the page
View 2 Replies View RelatedI want to make an excel funktion than can distinguish between 3 variables. The three variables are the outcomes of my first function which are 0, 1 and 2 these IF functions can be seen below:
=IF(B11>52;"1";"0")
=IF(B12>5;"1";"0")
Then when I have these results I have tried the following function:
=IF(C11+C12=2;"6-12";"4-6")
By using this function I get an output for 2 (true) and 0 (false), but I would also like an output for 1 (which would be 6 in my work)
It looks like this:
Var 1 58 1
Var 2 4 0
Suggestion 4-6
So in the above case where the sum of var1 and var2 is 1 it is only counted as false for not being 2 and therefore = 4-6 instead of what I would like it to be = 6 (for 1)
I'm trying to count cells in one column that match a variable only if it also matches a variable in another column. For example, I want to count all of the cells in column A that match "Franklin" only if column D shows "True".
View 5 Replies View RelatedSay I have a list of part numbers, and each part number has an X or a 0 next to it, depending on my own set parameter.
How do I then report that data on another tab so that it counts how many there are in a set area AND if its an X.
At the moment I have this:
Can I put two variables into a SumIF? forexample I want to sum Column C if Column A is equal to Apples and Column B is equal to Oranges, then sum Column C. Is there a quick formula?
View 3 Replies View RelatedI am having real trouble with a formula.
I have used a similar formula for to calculate a column.
Can any one see where I am going wrong. It is the cell highlighted in yellow on the attached spreadsheet.
I'm having trouble with my logic again :/
AREA
Tp std
Tp
30
5
So I want the Tp in the 3rd column to show the result:
IF AREA is less than or equal to 20, Tp=Tp std / 2
IF AREA is between 20 and 40, Tp=(((AREA-20)/(40-20))*(Tp std/2))+(Tp std/2)
IF AREA is 40 or greater Tp = Tp std
But as one equation
I have just been struggling with the range part.
I am trying to OFFSET from cell A1 based upon a variable in cell A2. The cell I need to OFFSET to is also located in column A, but it could always differ based upon the variable in A2. Here is the piece of code performing this OFFSET.
View 7 Replies View RelatedI used a macro to get the following code, but would like to do this with VBA code where I use variables and numbers instead of the
macro's ("I568:J568") notation. Thus I would have something like (lRow, 9) : (lRow, 10) or whatever the correct notation is. Basically I'm trying to copy and paste formulas from one row to the next.
Is there a way to change variables while the code is running?
View 11 Replies View RelatedI know that we should declare all variables at the beginning of a subroutine, in fact I'm told it's good practice to use Option explicit to 'force' variables to be declared, my question is why?
If I don't declare a variable the routine still seems to work OK so what is the downside of not declaring them upfront? Is it just for neatness or common practice or is there another reason?
I want to schedule a report to run overnight when I'm not at work, and it needs to save as a filename with the previous day included in it
For example, the filename needs to be saved as
C:Test_variable_ver1.xls where variable is equal to day(today()-1) in excel terms.
I have to count a specific column based on two criterias...
Column B Column C
SCD Y
ECD Y
DCD N
SCD N
SCD N
I have tried =COUNT(IF(AND(B3:B51="SCD",C3:C51="Y"),1,0)) But that doesn't seem to give me anything but a "0".
I want to have formula with: ActiveCell:formula = I want to sum columns in a row having a column variable called: col The col variable will be the far right column and the other colunm in Row 2 will be col-3. What is the syntax to create this formula? If col = 5, formula normally would be :sum(b2:c5), I want to use col as the varialbe.
View 3 Replies View RelatedIn VBA, I just want to use an object within a formula that represents rows within a range of cells.
Here's what I mean. I create an variable named "additup":
additup = 2 'This value represents that row number I will want in the following messed up formula:
ActiveCell.FormulaR1C1 = "=IF(ISNUMBER(RC[-7]),RC[-7]/MAX(range(P(additup:Padditup+6000")),"""")"
Above, the formula checks if the cell that is 7 columns to the left is a number, and if so, divide it by the max value within the range (Col P, Row= additup) : (Col P, Row= additup+6000).
Clearly my problem is VBA syntax.
For our monthly report we would like to make a sum formular where the end column is a variable, so it can be updated one time instead of updating every formular. When I try a text formular it doesn't calculate but only show the text string. ="=sum(b5:"& a1 & "5)" so I can enter c in cell a1 for 2 comumn/month summation.
View 5 Replies View RelatedCan I use excel to get make an equation for 4 variables (x,y,z,w)
E.g.
a,b,c,d,3,f,g,h,i, would be constants
w = ax + by + cz + dx^2 + ey^2 + fz^2 + gxy + hyz + iyz
I tried regression but the equation looks like
w = ax + by + cz + c
Is it possible on ay other software e.g MATLAB
I have a spreadsheet with the following column headers:
CLIENT GROUP; CHARGE; INCREASE COST; ORIGINAL CHARGE
What I need to do is find the maximum increase by CLIENT GROUP. I have done this using an array formula (in spite of my irrational fear of them) as follows:
{=MAX(IF(Data!D8:D914="Dementia",Data!Y8:Y914))}
And this works. What I need to be able to do is find values from columns either side of this specific answer. That is to say, the maximum value for this client may be the same for other client groups, so I need to find the ORIGINAL CHARGE and CHARGE relating to the answer of this search.
I have been reading up on using INDEX, but do not know how to build INDEX into my above formula. Remember, I have an irrational fear of array formulas, and get easily confused by syntax when a single formula has many, many functions.
I have a dataset that will be updated frequently and dumped into cells A1:D### that would look like:
ID Week Sales Rate
1 1 $200 3 0.5
1 2 $200 3 0.3
1 3 $200 3 0.2
1 4 $200 3 0.5
...
The formula i'd like to calculate in Column E Variable = "Forecast" Formula =IF(B2
I have created a sheet (call it sheet2) with 5 columns as per below snapshot. There's quite a lot of data as much as 10k rows.
Rank
Total
city
[Code]....
What am trying to do is create a summary table which shows the top 5 cities per region based on the population. This summary table will be on a separate sheet in something like the table below. formula that can lookup a region say Europe and show the top 5 cities based on the rank already calculated on sheet2 and also show the total in a separate column.
Rank
Region
City
total
1
Europe
[Code] ........