I'm trying to get the % increase but when its goes from 0 to "xx value", I get the division by zero error.
For example:
2006 Sales: 0
2007 Sales: 10,000
It would show the correct % increase in sales.
I have a column where I am dividing 2 values in 2 different cells in 2 other columns. Obviously, wherever there is a zero in the denominator, the result is '# div/0!'. How can I get these to just be zero in these cases?
View 8 Replies View RelatedI am puzzled with the following formula (entered with CTRL+SHIFT+ENTER) and it will not work. I get a error due to division by 0
{=SUM((MONTH(A$1:A$25)={1,2,3,11,12})*B$1:B$25)/SUM(MONTH(A$1:A$25)={1,2,3,11,12})}
My intention is to simply get an average of the values in column B if its respective row in column A is month # 1,2,3,11, or 12
A
B
1
01/15/2013
100
[Code] ......
Refer to the above table. Since A1, A2, A5, and A6 are having the months I seek, I then need Excel to use the values in B1,B2,B5, and B6 to offer me the average. In this case it should be (100+200+500+600)=1400 then divided by the number of occurrences column A had months that matched my criteria=4... so the final answer i would need is 1400/4 = 350
I know there is a way to divide by 0 in Excel and get 0 (or NA) but can not remember how to do it. Help. (Is there a problem with printing the resutls?)
View 9 Replies View RelatedWhen I debug this script I get: division by zero!
In 3 lines over the debugging line, the script are writing out the variable "prosentref" as 1. Whatt can be wrong?
(the value in cell T8769 is 1)
Option Explicit
Sub optimaliseringDrift()
Dim Pgm1 As Integer
Dim Pgm2 As Integer
Dim PL As Integer
Dim lamda_gm1 As Double
Dim lamda_gm2 As Double
Dim deriv1 As Double
Dim deriv2 As Double
Const Pgm1_max As Integer = 200
Const Pgm2_max As Integer = 300
Const Pgm1_min As Integer = 45
Const Pgm2_min As Integer = 40
Const deltaP As Integer = 5
In the attached file I am simply trying to get a percentage for a given group based on the column "annual starts". When I try and copy down the formula for the other cells it gives me an error because its using the wrong denominator (the errors show up in the excel sheet as #div/0).How can I make this consistent?
View 2 Replies View RelatedI have a forecast for a week, all days I type in, the real order, in the end of the week I got a difference between the forecast and the real orders. the difference can be positive or negative, in any case I want that difference to be added on the next cell on next week, plus the difference between the forecast and the real order from the day before, and so on.
I'm using this formula "E4*($L$3+1+IF(K4,ABS(K3/K4-1),0))" but if the real order is less than the forecast the formula add the difference increasing in a positive way, when what I want is decrease the value if the difference shows a negative tendency.
hope this make sense.
I attached a file with what I intend to do.
I work in a finance dept and we often need to divide our numbers into 12 months but I need to only work with whole numbers, not decimals. Is there a way for example of forcing either in a formula or with VBA code to get 10,000 to divide equally by 12 months? At the moment it comes out at 833.333333. What I want is something that randomly assigns 833 to any one of the 11 months of the year and for the other remaining month put in the difference which is 837 to get the total to add up to 10,000exactly.
View 9 Replies View RelatedI have this formula. I'd liked the entire referenced amount(s) to be divided by 2. Nothing I tried worked.
= SUMIF( 'X'!$B$1:$B$3000;'Z'!$B34;'X'!$F$1:$F$3000)/7,6+(SUMIF('X'!$B$1:$B$3000;'Z'!$B34;'X'!$G$1:$G$3000)/7,6)+SUMIF('Y'!$B$1:$B$3000;'Z'!$B34;'Y'!$F$1:$F$3000)/7,6+(SUMIF('Y'!$B$1:$B$3000;'Z'!$B34;'Y'!$G$1:$G$3000)/7,6)
I work in a finance dept and we often need to divide our numbers into 12 months but I need to only work with whole numbers, not decimals. Is there a way for example of forcing either in a formula or with VBA code to get 10,000 to divide equally by 12 months? At the moment it comes out at 833.333333. What I want is something that randomly assigns 833 to any one of the 11 months of the year and for the other remaining month put in the difference which is 837 to get the total to add up to 10,000exactly.
View 9 Replies View RelatedI want to use offset in a macro based on a callvalue. for example I have
200 in 'A1'
25 in 'B1'
current selected cell is 'C1'. I want to go 8 (200/25) cells down. something like offset(A1/B1,0).
1) I am trying to find a matching value in a table. I have a 5*252 table that starts in B2. So the table goes from B2 to F253. I am trying to match a value in column D (column 3 in the table and column 4 in the spreadsheet) with a value in Column F (column 5 in the table and column 6 in the spreadsheet). The original value is in cell 222 in the table and cell 224 in the spreadsheet.
I tried the LOOKUP, VLOOKUP and HLOOKUP functions, but they return nothing but N/A. I use a reference cell or just the value for the lookup value but it does not work. I do not know if I am using the wrong formulas or what, but I have tried various permutations. (question 3 in excel workbook )
2) I am trying to calculate the standard deviation of a column D (contains both numbers and text) divided by column B (first in table). Excel does not appear to have a custom division formula. It has a remainder and a quotient formula which does not apply here. The problem is that the STDEV function does not allow for a division sign (/) in the formula. the STDEV function does ignore texts.
Is there a way for me to divide a cell ( containing both letters and numbers) by another cell just containing numbers and then taking the standard deviation of those values all in one formula?
I need a slight mod to the below code which works perfectly otherwise. What it does is it divides whatever is in column K by 30 and puts in its relative cell in column M( There a bunch of mini tables below each other with blank rows in between).
The thing is sometimes there are characters in column K like "N/A" for instance and the macro crashes since its only designed to take into account numerical and blank cells in column K.
We make many graphs using XYscatter charts with lots of data points using Excel 2003 with the horizontal scale properly scaled as frequency. I have been asked to label that axis in some way as period (=1/frequency) without changing the scaling for the data plot. Is there a suitable way to do this? It would be OK to just change the axis numbers to 1/frequency computed from them automatically. Is Excel 2010 any easier for this?
View 9 Replies View Relatedhow do i change a value that gives me #DIV/0! to "0"
In my worksheet, i have a few #DIV/0! error.
what i want is when the formula shows that error, i want it to 0 instead of #DIV/0! for every row and column throughout my whole workbook can it be done?
I was wondering what I can add so this will not error when I delete the contents of the target range,
Private Sub Worksheet_Change(ByVal Target As Excel.Range) If Not Intersect(Target, Range("C11:C29, E11:E29")) Is Nothing Then
If Target.Cells.CountLarge > 2 Then Exit Sub
Application.EnableEvents = False
Target.Value = UCase(Target)
end sub
Running Two Worksheet Change Scripts Gives Error
I need to run two VBA scripts on the sheet1 tab:
I was quite a few problems using worksheetfunction.ln() to calculate % change. I decided to write more basic code to try to accomplish this but I'm getting an overflow error.
Code:
DRows = WorksheetFunction.CountA(Sheets("INFO").Range("A:A"))
For r = 1 To (DRows - 1) '***** -1 is bc of ln property
percentchange = 0
newval1 = Worksheets("INFO").Cells(1 + r, 2).Value
old1 = Worksheets("INFO").Cells(1 + r, 2).Value
percentchange = (newval1 - old1) / old1
Worksheets("info").Cells(2 + r, 3).Value = percentchange
Next r
Is there a line of code that I can use at the beginning of a macro to unmerge all cells on an entire sheet named "Test1"?
View 4 Replies View RelatedThe following code works fine, but when I put the code in an ActiveX Combobox Change Event it gives a run-time error 1004. ("Select Method of Range class failed")The error occurs on the following line
Code:
Worksheets("SAVED").Range("A" & l).Select
Code:
Dim l As Long
Application.ScreenUpdating = False
l = Application.WorksheetFunction.Match(Worksheets("DATA").Range("O34"), Worksheets("SAVED").Range("A1:A10000"), 0)
Worksheets("SAVED").Activate
'ROSTER===
Worksheets("SAVED").Range("A" & l).Select
Selection.Resize(1, 739).Offset(1, 2).Copy
[code]......
I encounter an problem when I migrate the excel application from excel 97 to excel 2000. The application basically composed of VB6 and VBA. When the program execute to line "ChangeHistoryDuration", i.e.
'Turn On the Audit
ExlApp. ActiveWorkbook.KeepChangeHistory = True
ExlApp.ActiveWorkbook.ChangeHistoryDuration = gi_duration
ExlApp.ActiveWorkbook. SaveAs w_filename, , gs_open_pwd, gs_write_pwd, , , xlShared
Run-time Error '1004', Method 'ChangeHistoryDuration' of object '_Workbook' faild was found. However, it runs successfully in excel 97. Does anyone know the possible problem that cause such error.
I've been getting a type mismatch error with my code (upon using multiple cells) and I can't quite figure out why. I have the following
Sub Quicky()
If Worksheets("Daily").Range("B13").Value = 4 Then
Range("B13:H13"). Merge
Range("B13") = "Due " & Range("B13").Value & " times"
End If
End Sub
This code works just fine, but if I change Range("B13") in the first line to Range("B11:B13") that's when I get a type mismatch error.
Also, I'd like to be able to make it not have to use the value 4, but use whatever value is in the range, but that's a secondary issue. I hope that is not too close to a second question as I am attempting to follow the rules.
This was also posted at ....
This is my
Private Sub Worksheet_Change(ByVal Target As Range)
If Intersect(Target, Range("D6:D6000")) Is Nothing Or Intersect(Target, Range("D6:D6000")) = "" Then
If Intersect(Target, Range("F6:F6000")) Is Nothing Or Intersect(Target, Range("F6:F3000")) = "" Then
If Intersect(Target, Range("I6:I6000")) Is Nothing Or Intersect(Target, Range("I6:I6000")) = "" Then
Exit Sub
Else
Do Something......
End If
End If
End If
End Sub
when excution comes to this line
If Intersect(Target, Range("D6:D6000")) Is Nothing Or Intersect(Target, Range("D6:D6000")) = "" Then
a run time error (91) appears, it tells object variable or with block variable not set.
Run-Time error '1004':
Method 'Range' of object'_worksheet' failed
The Function basically takes any cell in range with a formula and has it blue. If the formula is overwritten by the user it turns the cells colour Red.
Private Sub Worksheet_Change(ByVal Target As Range)
'change Colour of cells from blue if formula based to red if data typed by user
If Not Intersect(Target, Range("AS63,BA5:BP66,BT7:CI55,BU60:BU64,BX60:BX64,CA60:CA64,CD60:CD64,BT55:CI66,BT59:CI59,CF7:CF55,CF65:CF66,DJ19:DJ21,DJ24,DL5:DM36,DJ41,DJ45,DJ48,DL41:DM48,DH50:DH51,DJ50:DJ51,DL50:DM53,DH63,DJ63,DL55:DM58,DL60:DM66,DU5:DV33,DU37:DV58,DZ8:EB8,ED5:EE27,ED31:EE66,EM5:EN12,EM16:EN29,EM33:EN38,DH63,AL5:AM26,AL30:AM49,AL53:AM66,AV5:AW16,AV20:AW29,AV33:AW53,AV55:AW63,CO5:CO66,CQ5:CR66,CY5:CY66,DA5:DB66,DJ5:DJ7,DJ14:DJ15,DJ17")) Is Nothing Then
If Target.HasFormula Then
Target.Font.ColorIndex = 11
Else
Target.Font.ColorIndex = 3
End If
End If
End Sub
I am getting Run-time error 1004 "Cannot Change Part of a Merged Cell". I am trying to copy Sheet1 cell E11 (merged cells E11:G11) to Sheet2 cell E11 (merged cells E11:G11).
Sub PartBalance()
With Sheets("PART REQUEST")
If Range("D11").Value - Range("K11").Value 0 Then
[Code]....
I have been facing a run time error 1004 ("Cannot change part of a merge cell") when I am to run the following code. I have some merged cells in my excel sheet.
Sub Save2013()Sheets("Invoice").Range("I25:I33").ClearContents
Sheets("Invoice").Range("K25:K33").ClearContents
Sheets("Invoice").Range("K15:M19").ClearContents
Sheets("Invoice").Range("E15:G17").ClearContents
Sheets("String").Range("I58:J58").ClearContents
Sheets("Invoice").Range("T14:V1419").ClearContents
ActiveWorkbook.SaveEnd Sub
I have this code that works fine until I password the sheet and the range (b9:d65536) is protected. When I protect the sheet and make a change I get a debug error. What would I need to add/change to handle protected cells on a protected sheet?
VB: AutoLinked keywords will cause extra spaces before keywords. Extra spacing is NOT transferred when copy/pasting, but IS if the keyword uses "quotes" ....
When I paste data in Sheet2 in the attached CF Example2 file (Just by Selecting A1:L18 Cutting it and Pasting in the same place), the action of the VBA code in the Thisworkbook is correct but I am getting the 1004 Error Message from the VBA debugger saying "Run-time Error '1004': Application-defined or object-defined error
View 2 Replies View RelatedI'm trying to protect cells based on what's input in column E. Here's what I tried, but it doesn't work. It's giving me a "Type Mismatch" error on the word "Annuity" where it appears first.
View 2 Replies View RelatedI had to add a column to all worksheets... so edited the code so it would still refer to the correct cell. I changed the two references to "K54", to "L54"... but following this change, I get an 1004 error stating "Select method of Worksheet class failed", and the following line is hi-lighted.
ws.Select Replace:=False
Sub PrntUsedShts()
Application. ScreenUpdating = False
'set page counter
Dim PgCnt As Integer
PgCnt = 0
'select sheets to print
For Each ws In ActiveWorkbook.Sheets
If ws.Range("L54").Value > 0 Then
ws.Select
Exit For
End If
Next ws...............