Running Two Worksheet Change Scripts Gives Error
Jun 11, 2009Running Two Worksheet Change Scripts Gives Error
I need to run two VBA scripts on the sheet1 tab:
Running Two Worksheet Change Scripts Gives Error
I need to run two VBA scripts on the sheet1 tab:
The intent of the code below is to run the marco HideCol when a change is made in cell C10. If I actually change the value in C10 it works. However, I have C10 linked to another worksheet (=anotherpage!A13). When the value changes, my macro is not executing.
Here is the code:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim changed As Range
Set changed = Range("C10")
If Not Intersect(Target, changed) Is Nothing Then
HideCol
End If
End Sub
I've got a worksheet_selectionchange macro on a sheet, and another macro that you can run after it. The issue is that when the second macro runs, it also runs the selectionchange macro, and wipes some of the info that the second macro should be copying.
Is there a piece of code that I can use in the second macro to block the selectionchance code from running until it's compelte?
This is my
Private Sub Worksheet_Change(ByVal Target As Range)
If Intersect(Target, Range("D6:D6000")) Is Nothing Or Intersect(Target, Range("D6:D6000")) = "" Then
If Intersect(Target, Range("F6:F6000")) Is Nothing Or Intersect(Target, Range("F6:F3000")) = "" Then
If Intersect(Target, Range("I6:I6000")) Is Nothing Or Intersect(Target, Range("I6:I6000")) = "" Then
Exit Sub
Else
Do Something......
End If
End If
End If
End Sub
when excution comes to this line
If Intersect(Target, Range("D6:D6000")) Is Nothing Or Intersect(Target, Range("D6:D6000")) = "" Then
a run time error (91) appears, it tells object variable or with block variable not set.
I have this code that works fine until I password the sheet and the range (b9:d65536) is protected. When I protect the sheet and make a change I get a debug error. What would I need to add/change to handle protected cells on a protected sheet?
VB: AutoLinked keywords will cause extra spaces before keywords. Extra spacing is NOT transferred when copy/pasting, but IS if the keyword uses "quotes" ....
This code works well when I run it saved as an .xls. When I save the file as a template and then try to run it bombs on the very last line.
View 2 Replies View RelatedI have a code to save a file. I've used it before so tried to adapt for current requirements. Seems I can't get around the "checkdate" as I get a "Compile Error: Sub or Function not defined" message.
Sub SavetoEst()
Dim strHeader As String
Dim i As Integer, j As Integer, k As Integer, l As Integer, m As Integer, n As Integer, x As Integer
Dim fs0
Dim f, getname, path
Dim fd As FileDialog
Dim fdfil As FileDialogFilters
Dim strFIlename As String
Dim strdate As String
[code]....
I have an Excel file with a table of data on Sheet1. The table of data has 3 fields which are Code (a Text field) , Date (a Date field) and Amt (a Number field). I'm using vba with sql code to query that table and return the results of the query to a different sheet in the same file. So just to reiterate, Excel is my data source. I've done my research and largely worked this code out.
I'm also plugging a date parameter into the WHERE CLAUSE of the vba/sql code and this date is drawn from cell D4. This way, the user can change the date in cell D4 and this will change the criteria in the WHERE clause of the sql query to give them the results they want.
However I am getting an error that reads 'Data type mismatch in criteria expression' when I run the below code, so there must be something wrong with the specific syntax I'm using to plug in the date from cell D4.
Note that I can get the code and parameter to work if I make the CODE field the parameter with the query definition line of :
query = "SELECT [Code], sum([Amt]) as Ttl FROM [Main$] WHERE [Code] = '" & Range("D4").Value & "' group by [Code]"
Sub Pull_Data_from_Excel_with_ADODB()
Dim cnStr As String
Dim rs As ADODB.Recordset
[Code]....
I tried to adapt this code into my own from another thread. [url]
BUT, I am getting an error when running it. On the "For i" line. And I know just enough VBA to be dangerous. Can someone help?
I have another code setup to run if a certain cell equals "October" then it calls ImportData. Then this code is supposed to pull all files out of My documents/TechConnect/October08 and place the data into sheet 1....
I want to place a message in cell
Sub OutOfStockDate()
templateSheet.Range("B15").value = dataSheet.Range("G5").value
If dataSheet.Range("G5").value = "" Then
templateSheet.Range("B15").value = "There is no Out of Stock Date"
End If
End Sub
However when I run this code I get the infamous 1004 error.
I am having grief trying to get a sub from a Module to run when a single cell on a worksheet changes.
The code I have at present is:
Private Sub Worksheet_Change(ByVal Target As Range)
If Not Intersect(Target, Range("p4")) Is Nothing Then
wksheet = Name
vbgraph wksheet
End If
End Sub
I am getting a run time error 1004 when i am running this macro. I got this macro to my earlier thread. As i am a beginner in a macro, I am unable to identify the problem. I have attached the workbook for the same
View 5 Replies View RelatedI am trying to run the following macro to copy a data range(A1:HX1) range from one sheet(sheet 6) and past it into the next available blank row in another sheet called New_Overall_Input_File but get the following error when I try and run it......."Object Required"?
Sub ALLCARS()
Sheet6.Range("A1:HX1").Copy
New_Overall_Input_File.Range("D" & Rows.Count).Offset(1, 0).PasteSpecial xlPasteValues
Application.CutCopyMode = False
End Sub
I have a workbook which I regularly upload that cannot have macros within it; however, to update and process the data, I must utilize VBA Code.
I tried to work around this by storing my macros in a module in another workbook. My process is to have the VBA Code Module from the other workbook open and have the active workbook be the one I want to change, then I run the VBA Code from the other workbook.
This used to work. However, I am recently getting problems with the Code not running correctly. Sometimes it only runs the code if the affected cells are not hidden; other times it will not run the code at all!
I keep getting this windows script host error.
Script: C op 5 macro.vbs
Line: 5
Char: 1
Error: Unknown runtime error
Code: 800A9C68
Source: Microsoft VBScript runtime error
Code:
Dim xlApp
Dim xlBook
Set xlApp = CreateObject("Excel.Application")
Set xlBook = xlApp.Workbooks.Open("S:OperationsDaily ReportsTop 5 op five macro.xlsm", 0, True)
xlApp.Run "WeeklyReports"
xlBook.Close
xlApp.Quit
Set xlBook = Nothing
Set xlApp = Nothing
I am getting an error when I protect a worksheet and save it. Upon re-opening the worksheet, I try to use the cells that are being formatted by a macro, but I get the following error...
Run-time error '1004':
Unable to set the NumberFormat property of the Range Class.
If I open the worksheet and it is already protected from when I last closed it, then I get the error. If I unprotect the sheet, then close it and reopen it, then I don't get the error. Does anyone know what I might be missing or doing wrong.
I am trying to run a macro when any cell in a range changes. I have got this to run, but only on one cell, not any of the cells in a range.
Working code:
[Code]....
Non working Code:
[Code] .........
I am at a loss as to why the range code won't work, or why the first code won't work without makig the cell reference absolute.
I have following macro run when the given cell changes:
HTML Code:
Private Sub Case_Checkout(ByVal Target As Range)
Dim KeyCells As Range
Dim WS As Worksheet
Dim LkUpVal As Range
Dim LkUpRng As Range
[Code]...
It was working...and then just stopped working. I scan a barcode into cell A1 and hit enter. Can't figure out why is stopped unhiding the tab. I haven't changed anything...
I am getting a "Run time error 5", "invalid procedure call or arguement" when I run a macro on a PC other tha the one on which it was created.
In this case both PC's are running on the version 2007 of Excel.
This is the highlighted statement when the macro fails
Code:
ActiveWorkbook.PivotCaches.Create(SourceType:=xlDatabase, SourceData:= _
"SOCX25!R1C1:R" & Lr & "C23", Version:=xlPivotTableVersion14).CreatePivotTable _
TableDestination:="SOCX25!R7C25", TableName:="PivotTable1", DefaultVersion _
:=xlPivotTableVersion14
I have a user form that builds a workbook from one template sheet and information in a SQL Server database. The template sheet contains 4 charts that are copied to every new sheet in the workbook, then their data ranges are set through VBA code. For a while the code was working wonderfully. All the necessary sheets were being generated and correctly populated.
Yesterday I added a new module to generate another sheet and pull data from the same SQL Server tables. Now if I run the userform it will work fine once and create all the needed sheets, and set all the charts to the proper ranges. However, if I delete all the created sheets and run the form again, I get:
Runtime Error '-2147417848 (80010108)'
Automation Error
The Object Invoked has disconnected from its clients
The error consistantly occurs for the following line of Selection.Copy Destination:=Worksheets("Master").Range("D1")
After the error the selected range still shows up as surrounded by a selection box, but if I change sheets, the box moves to the new sheet. Also I cannot select any new cells in the work book. In order to get Excel to work again I have to End Task from the Task Manager just to get it to close. When I restart Excel and go back to my work book I get the same results, i.e. The form works great once, then Excel dies.
I have tried qualifing all of the objects that can be qualified. I have tried setting all possible varriables to Nothing before exiting my macros. Nothing I have tried, or found suggested so far in the forum works.
I have a userform with a combobox in it that's rowsource is a column of company names in a worksheet. When a company name is chosen, a combobox change private sub runs and many userform textboxes are populated with information about the company that was chosen from the combobox dropdown. This information is stored on a worksheet. I then want to edit any of the information in these textboxes. Once my edits are made I have a CommandButton that is pressed to save the edit changes. This CommandButton runs a private sub that disables the combobox (thinking this would prevent the combobox private sub from running), deletes the row that the information originated from, and then SHOULD make a new row of values based on the contents of the textboxes following the edits. The problem is that the CommandButton coding that deletes the row causes the combobox change private sub to run because the company that had been selected is now the missing from the rowsource; this causes an error.
View 8 Replies View RelatedCan you run 2 modules at the same time on the same worksheet.
View 2 Replies View RelatedI am trying to create a program that will allow the user to browse for an excel worksheet and execute a macro that will format the worksheet with a click of a button.
Here is an image of what I want the template to look like:
Picture 2.jpg
Now I need to know what language I should use and the codes to make it run.
I have a PO Template, which I use it to issue Purchase Order and keep track on monthly purchases.
This PO template allow me generate a fresh PO with feature of auto "Name" which is the running number for the PO.
However, i have a problem to generate the reference number in the sequence which tirelessly seach a way to work this out.
Below is my current code, as i tried to set my statting code say "87500", the next incremental number just dont generate according to it sequence..
Code:
Sub AddSheet()
Dim strName As String
Dim intNum As Integer, intLastNum As Integer
Dim wsh As Worksheet
Dim lngRow
For Each wsh In Worksheets
[Code]....
Sub SplitOut()
Dim DataSH As Worksheet, OutSH As Worksheet
Set DataSH = Sheets("Input")
DataSH.Activate
lastrow = Cells(Rows.Count, "D").End(xlUp).Row
For Each ce In Range("D2:D" & lastrow)
Application.StatusBar = "Actioning " & ce.Row & " of " & lastrow.............
I am working on this spreadsheet that has a lot of information that will only get bigger as time goes on. I would like to organize the contents of one column into separate spreadsheets. So if I have "stacking" in one cell of that column, the whole row associated with that cell will go to a new spreadsheet labeled "stacking".
I have attached the sheet. I would like column D (Type_Code) to be organized by the words in that column. So I would have 5 or so worksheets labeled stacking, cartoner, wheel, inspection, etc. The data here is input by a machine.
i have some existing code which is trigerred when anything is input into column c. The code then adds various information in another three columns. One of which pastes a vlookup formulae, and i would like this forumlae pasted into the column c cell which i initialy edited, in order to remove the requirement for one additional column.
The existing code i have is:
Code:
Private Sub Worksheet_Change(ByVal Target As Excel.Range)
Dim MyText As String
MyText = Environ("username")
If Target.Cells.Column = 3 Then
With Target
If .Value "" Then
.Offset(0, 2).Formula = "=VLOOKUP(D:D,'P:TAOffshoreTAOffshoreTreasuryRecsGeneralCommit ID''s for control Sheet - Do not move or delete[commit ids - DO NOT DELETE OR MOVE.xls]Sheet1'!$A$1:$B$65536,2,0)"
[code].....
I have tried changing the offset to (0,0) or changing the offset to 'target = ', which does add in the vlookup but then the macro debugs at the 'If .Value "" Then' code?
an event macro to change the font colour of a cell whose value changes as a result of a calculation.
View 9 Replies View RelatedAttached is book in which, when a choice is selected from Drop Down list in ColumnF the macro has to do the need.
When the macro was written it was working well. But when I tried to change it as a Worksheet_SelectionChange event nothing is happenning even though a choice is selected from drop down list.
Basically the situation I have is Sheet2 has many references to cells in Sheet1. Sheet2 is for all intents and purposes a kind of nicely formatted report form, and Sheet1 is the input form.
My ultimate goal is to automatically resize row heights on Sheet2 when cell contents change on Sheet2.
Using a worksheet_change event isn't working I presume because it doesn't see the formula output change as a worksheet change, the worksheet_change is firing only when the input is changed in Sheet1.
how can I capture these formula output changes on Sheet2 (triggered from input on Sheet1) OR is there a way of making a particular sheets rows always adjust in height to best fit?
How would I add this formula as a worksheet function with VBA. I can't see INT, MOD or Year in VBA. Also want to change C2 to change to activecell column + row 2.
=INT(((C2-1461)- SUM(MOD( DATE(YEAR(C2-MOD(C2,7)+3),1,2)-1461,{1E+99,7})*{1,-1})+5)/7)