I need to get a macro to select all the data in column "A", sort it in ascending order, omit the blanks if any, then select (highlight) all the data so that another macro can be run.
When I record it, it will only record up to the last row I highlight but the data always changes so there could be more or less.
I'm trying to sort a whole list of data that's been separated into blocks with a row containing the value "a" like:
row 9 a
row 10 455
row 11 8892
row 12 34
row 13 a
row 14 578
row 15 92
row 16 a
etc..
I want to sort each block into ascending order using VBA code and then add in some extra code to do some more analysis.
The data to be sorted is in Column D, and there are also values in Column C and B that need to be sorted with the Column D values (so that they stay in the same rows).
I have a spreadsheet which contains a list of chemicals in Column A, and a list of numbers in Column B. The chemicals are separated into groups. I am trying to create a macro which sorts the chemicals in their groups by column B, so that the lowest number is at the top. I have 8 groups, and the number of lines in each group may vary, so I need to make the code dynamic.
I have attempted it. The way I thought it could be done was to search for the first group header, then save the address. Do the same for the next group header, then offset that by -1 row and 1 column, then sort using these two addresses as the range. The first part of the code works, where I find the address for both group headers, but everything after that doesn't work.
Sub Sort()
Dim CNMT(8) As String
Dim j As Integer
Dim fromRow As String
Dim toRow As String
Dim rng1 As Range
Dim rng2 As Range
CNMT(1) = "TPH Fractions"
CNMT(2) = "BTEX & MTBE"
CNMT(3) = "PAHs"
CNMT(4) = "VOCs"
CNMT(5) = "SVOCs"
CNMT(6) = "Metals"
CNMT(7) = "Inorganics"
CNMT(8) = "Pesticides"
For j = 1 To 8..................
I have a multiselect listbox with values that gets populated from a sql statement, and I would like to get is the first or second index from the selected item. I know how to get the listindex from a combobox by using:
VB:
cbnumber.List(.ListIndex, 0)
How can I loop through and get the 1st index number for the selected items only from the listbox? I want to pass this index number to another sql statement.
I want to put a range select statement to select a cell and count down 10 cells and copy.
View 9 Replies View RelatedI have a command button on sheet MASTER. When the workbook is Activated I want it to check and see if in sheet COSTM, cell B3 there are the words "Project Number", if so then show command button (ClearPrevious), if not, don't show. Also, when the If statement is finished, then the workbook needs to end up showing the sheet MASTER. I have tried various codes and none work, or they are on perpetual loops. I know this has got to be simple, but cannot find an example to take from to solve the issue. Would appreciate any help offered. Below is code I have right now.
Private Sub Worksheet_Activate()
If Sheets("COSTM").Select Range("B3").Select = "Project Name:" Then
Me.ClearPrevious.Visible = True
Else
Me.ClearPrevious.Visible = False
End If
Sheets("MASTER").Select
End Sub
I have column A with various values in cells.
For instance, DG, GS, HG etc
I wanna do if a cell in column A is equal to DG then select the entire row that contains the cell. then call other sub.
My workbook holds a month template and sheets for each month. I work on modifications in the template ,but would then like to update all the monthly worksheets. I recorded a macro to show me how to start programming the vb sub, but get a runtime failure 'error 1004 Select method of range class failed' when trying to select the column to copy,
View 4 Replies View RelatedI have this:
Private Sub CommandButton1_Click()
Worksheets("Sheet1").Activate
Range("A1").Select
Selection.End(xlDown).Select
ActiveCell.Offset(rowOffset:=1, columnOffset:=0).Activate
ActiveCell.PasteSpecial
End Sub
it errors to: SELECT METHOD OR RANGE CLASS FAILED
I used to do some VB stuff several years ago, but it's unfortunately not exactly like a bicycle and I'm having a hard time remembering what I'm needing to do.
I have several functions in my macro which are supposed to select an entire column of data and do various things with it, from cutting & pasting to combining data from multiple text cells. Also it's got to input in one column, a text string "CIS". Anyway, if I tell it the whole column, then it winds up overflowing beyond what I need, and I really only want it to affect as many rows as have data in the spreadsheet.
Here's the data:
'Unlimited Range K here', that's where I want it to select to the last row of data for the range.
Sub ComputeCSV()
'
' ComputeCSV Macro
' Macro recorded 12/18/2006 by Matthew Roberts
'
' Keyboard Shortcut: Ctrl+l
'
Columns("G:G").Select
Selection.Cut
Columns("B:B").Select
Selection.Insert Shift:=xlToRight
Columns("G:G").Select
Selection.Cut
I need to create a new macro that will select all rows that have data and create a (3) pivot tables.
I have tried to create macros that will create a new tab and populate the pivot table. I keep getting an error that says "subscript out of range", so instead of creating the tab during the macro I have created the tabs as part of the template.
Again the problem is when running the macro with more rows, the macro doesn't recognize the additional rows. Ctrl + A is used during the macro but is hard coated for only the number of rows it selects, Ctrl + A twice is giving me "blank" data in the pivot tables. I have attached a sample sheet with 14 rows. Next month there may be only 10 rows or 50 rows. I have macros created for the pivot tables to view.
1: How can I create a macro to select all rows with data?
2: Can I create 1 Macro to create all 3 of the pivot tables needed?
3: Can the macro also create the tabs during the execution of the macro?
I think this may be a little difficult (for me at least!) but would it be possible to have a list of the open workbooks popup when I run my macro, so that I may select which workbook to run it on?
The macro itself just does some formatting of the sheet, but it is contained in a master file.
Can anyone help me to write a macro to select certain cell depending on a value in other cell.
I.e: If cell A100=1, then select cell B1, but if cell A100=2, then select B2, and so on.
I have a need and thanks in advance to everyone who can help me with this: Run a macro to copy from cell B2 in worksheet2, then paste that into every cell that has the value = 1 in worksheet1.Range("B2:Z40"). Cells in range B2:Z40 will be updated each week with the value varied from 1 to 10.
View 5 Replies View RelatedTesting to see if this works ( ignore the multi posts, forum had a problem )
I basically need a macro to select whats inside the blue border area and print it.
I plan to include a button next to each invoice so i can just click the button and have it print the adjacent invoice.
Is there any way to create a script or macro to "find" a number from column A that is in column B, then select it that row? Then it willl repeat that process with the next number in column A until the end....
View 14 Replies View Relatedi need is a macro that once run selects a certain (or multiple) comboboxe's values. Eg I select macro 'test' and it selects value 1 on combo box 1, value 2 on combo box 2 etx..?
View 2 Replies View RelatedI have a workbook with around 350 worksheets. A column in the main sheet contains a list of part numbers which correspond to the names of the worksheet tabs. When a cell on the main sheet containing a part number is selected I would like a macro to find the corresponding worksheet, move that worksheet to the end of the row of tabs and open it.
I am using excel 2007
I record macro and hit select all and that action won't record. what's the macro code for select all in excel. i assumed it was the same as word
selection.wholestory
but it's not
macro to select the header and rows below till the next header is reached if column L is less than column J for the whole sheet which can be up to 5000 lines or more. Then copy all of those to a new sheet. Here is part of the spreadsheet for a visual:
Product number
Name
Name
Finish date
Planned Qty
Mfg U/M
Lvl
Component
Name
[code].....
I'd like to create a macro that will do this trick:
Only activates when I select a cell in a ListObject.When activated: selects the entire first row of that Listobject,and only selects the cells in the range of that Listobject.
Because I have more Listobjects, I'd like to have one code which works for all of them.
I have an Excel 2003 spreadsheet, and in certain cells, I have a single letter. (e.g.) In A1, I have the letter A, in B1, I have the letter B etc.
I am trying to write a macro which will allow me to select a specific row, and depending on which letter is in which cell, set the cell directly below it to the numeric equivalent of the letter (e.g.) if in cell A1, there's the letter A, I want the number 1 in cell A2; and if in cell E5, there's the letter Z, I want the number 26 in cell E6 etc.
All I've got, is a VERY long macro, which will take row 1, and change each cell value to it's numerical equivalent. Here's an extract:
For Each cell In ActiveSheet.Range("A1:Z1")
If (cell.Value = "A") Then
cell.Value = "1"
End If..................
range("A1").select
can I replace A1 with l where
l = worksheets("List").cells(3,2)
?
it doesnt like it, is there a better solution?
I have two lines (in a sheet) that I am trying to move based on a formula. The wierd thing is I can get the first one to work fine, but when I select the next line it will not work. I have Line 2, and Line 10. Basically the code is:
ActiveSheet.Shapes("Line 2").select
Selection.ShapeRange.Top = 159
ActiveSheet.Shapes("Line 10").select
Selection.ShapeRange.Top = 300
For some reason it just moves Line 2 no matter what I do.
I am trying to pause a macro on a protected sheet, select 2 adjacent cells (initially protected), utilize an existing drop down box to select a name from the list, copy the name from the list into the range of cells, then re-start the macro.
I had no problem when there was just one name (see John Smith below). I tried to use the InputBox command but needed to actually type in the name.
ActiveSheet.Unprotect
Range("C27:D27").Select
'ActiveCell.FormulaR1C1 = "John Smith"
' Application.CutCopyMode = False
' ActiveSheet.Paste
'Range("c27:d27") = InputBox("Enter value")
Below is a macro I'm trying to create. The basically it's supposed to be a quick simple macro to save lots of time. I want to select current tab, move/copy (create copy) to the end....then select the tab I've just copied and copy paste special the values (then rename the tab to todays date) FYI the tab I'm copying is called rebuy shipping.
However, I want to then do the same at a later date with the most recent tab, but with the below code it always selects and copies the original tab:
Sub macrorebuy1()
'
' macrorebuy1 Macro
'
' Keyboard Shortcut: Ctrl+k
'
Sheets("Rebuy Shipping").Select
[Code] .....
I assume this is a simple error. I've tried inserting Activesheet.previous.
I have two slicers, say slicer 'F' that slices on fields 'x', 'y' and 'z' and slicer 'E' that slices on fields 'a', 'b', 'c'.
I select these values by using a very simple macro. For instance to select z in slicer "F", I have the following code:
With ActiveWorkbook.SlicerCaches("F")
.SlicerItems("x").Selected = False
.SlicerItems("y").Selected = False
.SlicerItems("z").Selected = True
End With
However, I want the selected fields to have more flexibility than which is possibly by coding them in VBA. Ideally, I would want to write the selected fields in a cell in Excel (also if there are more of them!), then let the macro retrieve these fields and use them to apply to the slicer. So I write in a cell slice on X and Z, the macro picks this up and performs this operation.
Is this possible?
I'm in charge of taking a report; streamlining its functions; and automating future reporting.
I'm using a database and some of the reporting function Access has. For another variation I'm forced to export the query to excel and transpose the vertical layout horizontally.
I'm making the entire process automated via a macro. The code is too long to post in its entirety but here is an example of what I'm trying to accomplish:
the macro code to select the cell after the bottom of a column of data e.g. I have data in A1:A300 and I require the macro to automatically calculate the last row in the range (in this case A300) and then to select A301 (in this case)
(I know I can record a macro but the number of rows can potentially differ every time I run the macro)
N.B. Excel version 2003
I am working with a spreadsheet that has asterisks in place of text that should be added. The problem is that it is surrounded by HTML code. I need to be able to select the cell, go to, and highlight the text, where I can hit delete, or just start typing to replace the asterisks, BUT NO OTHER TEXT IN THAT BOX CAN BE EDITED.
Attached is an example of what I'm wanting to replace.
example 1.jpg
I want to create a macro that will go to the text I have highlighted here, and STOP just how this is, so I can simply put what I want in place of the asterisks, and move to the next cell.
Is this possible?