the macro code to select the cell after the bottom of a column of data e.g. I have data in A1:A300 and I require the macro to automatically calculate the last row in the range (in this case A300) and then to select A301 (in this case)
(I know I can record a macro but the number of rows can potentially differ every time I run the macro)
N.B. Excel version 2003
I am trying to find a macro that look for last non empty cell in column A and them paste a formula/comment in all cells of column B.
View 3 Replies View RelatedHow would a code look like to select a range with a column header on top. in the code you provided, it selected the entire W column. How would you select the range given that the W column was called Address?
Sheets("Sheet1").Select
Range("W1").Select
Range(Selection, Selection.End(xlDown)).Name = "Problem_Area"
Macro below - it now works and selects all the data in spreadsheet and converts to Proper Case
However I also need a macro to select all except the last column of data and convert all except the last column to Proper Case
It is for Post / Zip code info. so wish to keep it in Upper Case.
What I have already is:
Code:
Sub Propercase()
Dim LastRow As Long, LastColumn As Long
LastRow = Cells.Find(What:="*", After:=Range("A1"), SearchOrder:=xlByRows, SearchDirection:=xlPrevious).Row
LastColumn = Cells.Find(What:="*", After:=Range("A1"), SearchOrder:=xlByColumns, SearchDirection:=xlPrevious).Column
Dim r As Range, c As Range
Set r = Range("A1").Resize(LastRow, LastColumn)
[Code] .....
I was hoping I could easily amend the above to select all except last column.
In cell A1 I have a countdown timer from an external source that counts down to 00:00:00 approximately every 10 minutes and then resets.
I need a macro to be triggered whenever 00:00:00 is reached.
The macro will select column AL and copy a range of cells (within AL) that contain numeric values only and paste these numeric values in the adjacent cells in column AM. It is important that the paste is values only and not formatting or formulas.
Column is being fed dynamic data from an external source and displays either #N/A or numeric values.
I have a macro that automatically takes data from one sheet, copies it and pastes it on another sheet, but I want it to select the empty column that is to the right of the last column to contain data (so basically the next empty column). What code would I enter into editting my macro to be able to do this please?
Also, one thing I've tried to do with my macro is that when I select the data, it's suppose to select from the first name to the last. When doing the actions for the macro, I use "Ctrl + Shift + Down Arrow Key" to make the selection select the bottom of the list. However, when running the macro, if the list is longer (or shorter), the macro selects that number of cells instead of the action of just going to the bottom of the list. For example, if during the actions of the macro, I recorded using the Ctrl + Shift + Down Arrow Key that 50 cells were selected...next time if I have 60 cells, only 50 are selected, even though I used an action command which should select all the cells in that group (in this case being 60). Is there some code I can add to that so this would work correctly?
In case its required, here is the code from the macro:
The first code is on the top of the module.
Code:
Private Const OPEN_TIME_COL = 3
Private Const CLOSE_TIME_COL = 4
Code:
RowNum = .Cells(.Rows.Count, CLOSE_TIME_COL).End(xlUp).Row + 1
.Cells(RowNum, CLOSE_TIME_COL).Value = Now
So according to the second code, it records the closing time(now), in the CLOSE_TIME_COL(Which is D)
in the next availabe cell, from the CLOSE_TIME_COL....
But here is the part i am trying to change
Code:
RowNum = .Cells(.Rows.Count, CLOSE_TIME_COL).End(xlUp).Row + 1
So that, what it should do is find the last cell used in column C, (OPEN_TIME_COL) and shift right.
if the last cell used in C is C1, CLOSE_TIME.Value should be in D1
for example somthing like this... but this code doesnt work
Code:
RowNum = .Cells(.Rows.Count, OPEN_TIME_COL).End(xlUp).column + 1
I have five columns, everyone with a header.
ABCD E
HD1HD2HD3 HD4HD5
2xsdwkj
3xsaer
4xre
5xtrwhj
6xhj
7xdf
8x
9xww
I use filter on the headers, HD1, HD2, HD3, HD4, HD5
If I use Ctrl+Shift+Down(arrow down) on HD1, I manage to mark all the x from row 2 until 9. If I do the same on HD5, it’s stops after the first one(kj). But I want to mark all the way down to 9, even the empty one, but it must not go any further than to 9, last cell I column A. Is there a shortcut for this on the keyboard, or can someone give me some tips on writing a macro witch does this.
can a macro be used from the selected cell to select every other cell in same column? see attachment for before and after.
View 4 Replies View RelatedI am using 2010 and want to select a range starting at the same cell all of the time (regardless of whether or not it has contents - so let's say B7. Starting at B7, I want the range to include all of the columns starting at B and go to the end of all of the columns. Then I want the range to include all of the rows starting at B7 and end at the last row. I will eventually copy this range and paste it on another worksheet start on a specific cell of another worksheet. (Perhaps, we can add a name to this range).
View 2 Replies View Related. A B C D E
1 JanFebMarApr
2 Galle JGFGMGAG
3 Matara JMFMMMAM
4 KalutaraJKFKMKAK
5 PanaduraJPFPMPAP
6 ColomboJCFCMCAC
7
8 City Month
9 Kalutara Mar MK
When I type 'Kalutara' in A9 and 'Mar' in B9 I should get the answer as MK in cell E9
'Colombo' " " 'Feb' B9 " " " FC in cell E9 by refering the above table
can we use MATCH & INDEX or VLOOKUP & HLOOKUP
What is the formula I should write in cell E9 to get this done?
I want a simple macro which will go to the cell in row one in the active cell's column
View 2 Replies View RelatedI want to select the first blank cell in the first blank column. I would just look at the column and instruct it to select a given range, but each month the blank column will change (by moving one to the right).
So for example
This Month:
Columns A-Q all have data in it. So, I would need to select cell "R1"
Next Month:
Columns A-R will all have data in it. So, I would then need to select cell "S1" Need code to auto-detect the blank column and then select that column's first cell?
How do I code in VBA - I need to select the next empty cell down in a column - ie blank field so that I can transfer the next set of data
I am finding that I am using the 'go to' option frequently in my macros, but I feel very limited by the options that I have (I need to learn VB-I know) I would like primarily to discover how to select the last cell containing anything (not including blanks like the 'last cell' option in the edit>go to) within a selected row. Ideally, I would like a formula to fill downward a given amount of rows so as to prevent myself from having to fill them all the way down to the end of the spreadsheet (therebye making the file to large). Also, If anyone could guide me to a resource at which I can find similar commands.
View 9 Replies View Relatedcreate a code such that it will select a cell which is not empty and display the content in that cell. For example , in the attached file below i would expect output to be cells(2,5) = 12 and cells(4,5) = 13
View 2 Replies View RelatedWhat is the best way to select every third cell in column c starting with cell C5
View 3 Replies View RelatedI want a macro to be able to select & highlight (ready for copy/paste) all cells in the column range "A2" to the last populated cell in column A.
View 3 Replies View RelatedI have Microsoft Office Excel 2007 Power programming with VBA in which this website was listed as a good reference site. I am working on a spreadsheet where I want to select the last non-empty cell in a column and the column always has some cells that are empty, though it is NOT the last non-empty cell in the column. This spreadsheet is automatically generated and I want to change this particular column to all one format and all one number, 0042. This spreadsheet is then loaded into another system via tab-delimited txt file, so this number is meant to serve as an indicator. Sounds like I gave too much information, just wanted to be clear.
View 9 Replies View RelatedData example:
AB1AREANumber2SW103SW114SE125NE136SW147SW158SW169NW17
I need a code in VBA that can find the 1st cell in col A that contains "SW" and store the number in col B as V1= # then find the 4th cell in col A that contains "SW" and store the number in col B as V2= #.
so that i can do some math with the numbers. The code should result in 10-15
How do I select a cell based on its row & column count?
For example, Range("D8").Select
Instead of using ("D8") ,I need to select the cell based on its row & column count, i.e. (4,8)
excel VBA to find the first colored cell in the column "A" and copy it to the Range (E1)
View 5 Replies View Relatedhow i can go about finding the next empty row (and select the first cell of that row (column A))? edit: It probably should be noted that there are cells in Columns A through P. There are rows where all and/or just one cell contains data per row. So i cannot use a " lookup" based on a single column.
View 2 Replies View RelatedI am trying to paste data into a sheet immediately following the last weeks data. I went to use an offset function like :
Range("A2").End(xlDown).Select
ActiveCell.Offset(1, 0).Select
However, each weeks data is "Grouped" and therefore the .end(xldown) only takes me to the bottom of the visible rows, and the offset function selects one of the hidden cells.
I used to do some VB stuff several years ago, but it's unfortunately not exactly like a bicycle and I'm having a hard time remembering what I'm needing to do.
I have several functions in my macro which are supposed to select an entire column of data and do various things with it, from cutting & pasting to combining data from multiple text cells. Also it's got to input in one column, a text string "CIS". Anyway, if I tell it the whole column, then it winds up overflowing beyond what I need, and I really only want it to affect as many rows as have data in the spreadsheet.
Here's the data:
'Unlimited Range K here', that's where I want it to select to the last row of data for the range.
Sub ComputeCSV()
'
' ComputeCSV Macro
' Macro recorded 12/18/2006 by Matthew Roberts
'
' Keyboard Shortcut: Ctrl+l
'
Columns("G:G").Select
Selection.Cut
Columns("B:B").Select
Selection.Insert Shift:=xlToRight
Columns("G:G").Select
Selection.Cut
Can anyone help me to write a macro to select certain cell depending on a value in other cell.
I.e: If cell A100=1, then select cell B1, but if cell A100=2, then select B2, and so on.
I am making a worksheet that I intend to use to track my money. When I first open the worksheet, it opens on a tab where I can click a button to report a type of transaction. For example, if I make a withdrawl from the bank for $50, I click the button, it takes me to the sheet that tracks my bank-related stuff, selects a cell and opens up a form, at which point I type in what the transaction consisted of. However, the sheet also tracks what is in my wallet, so I'd like to finish reporting the bank transaction in the form, and have a button to click that reports the wallet part automatically.
So, essentially what I need to do is select several non-contiguous cells that are in the last row of the bank sheet, copy them, switch to the wallet-tracking sheet, and paste them in a row that is one past the last row of that sheet. The paste should keep the cells next to each other, even if they were non-contiguous when they were being copied.
Highlighed the Column and Row of the selected Cell. I have seen someone using it. Whenever he click on any cell the related column and Rows clour change. For Example if I select Cell B5. The Column B and Row 5 change its colur from B1 to B5 and Row from Column A to Column B. If this option is already available in office 2010
Column B
Row 5
Was wondering .. as I can not seem to find the right type of coding.
I am trying to have the file open in the next blank cell on column C, ut at least have 5 lines showing above it as there is Freeze Panes.
Is this possible for excel to do upon opening?
I am working with a spreadsheet that has asterisks in place of text that should be added. The problem is that it is surrounded by HTML code. I need to be able to select the cell, go to, and highlight the text, where I can hit delete, or just start typing to replace the asterisks, BUT NO OTHER TEXT IN THAT BOX CAN BE EDITED.
Attached is an example of what I'm wanting to replace.
example 1.jpg
I want to create a macro that will go to the text I have highlighted here, and STOP just how this is, so I can simply put what I want in place of the asterisks, and move to the next cell.
Is this possible?